! Started logfile: /g0/scr/pima/npcsb_uvs/J1358+8340_S_uvs.log on Wed Sep 25 00:11:36 2013
obs /g0/scr/pima/npcsb_uvs/J1358+8340_S_uva.fits
! Reading UV FITS file: /g0/scr/pima/npcsb_uvs/J1358+8340_S_uva.fits
! AN table 1: 46 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.986957 visibilities/baseline/integration-bin.
! Found source: J1358+8340
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23693e+09        8e+06          1        8e+06
!  02        2  2.26693e+09        8e+06          1        8e+06
!  03        3  2.35693e+09        8e+06          1        8e+06
!  04        4  2.37693e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 8172 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsb_uvs/J1358+8340_S]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.021810Jy  sigma=2.083635
! Fit after  self-cal, rms=0.855798Jy  sigma=1.765016
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.24 mas, bmaj=10.4 mas, bpa=4.135 degrees
! Estimated noise=7.07065 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.100816 Jy
! Component: 100  -  total flux cleaned = 0.136799 Jy
! Total flux subtracted in 100 components = 0.136799 Jy
! Clean residual min=-0.009315 max=0.017145 Jy/beam
! Clean residual mean=-0.000010 rms=0.002720 Jy/beam
! Combined flux in latest and established models = 0.136799 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.136799 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.106910Jy  sigma=0.200417
! Fit after  self-cal, rms=0.106815Jy  sigma=0.200167
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.020108 Jy
! Component: 100  -  total flux cleaned = 0.0318294 Jy
! Total flux subtracted in 100 components = 0.0318294 Jy
! Clean residual min=-0.006986 max=0.013264 Jy/beam
! Clean residual mean=-0.000004 rms=0.001861 Jy/beam
! Combined flux in latest and established models = 0.168628 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 18 components and 0.168628 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.100197Jy  sigma=0.185505
! Fit after  self-cal, rms=0.100165Jy  sigma=0.185383
! Inverting map 
! Added new window around map position (3.5, -0.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0119532 Jy
! Component: 100  -  total flux cleaned = 0.0183783 Jy
! Total flux subtracted in 100 components = 0.0183783 Jy
! Clean residual min=-0.006241 max=0.005751 Jy/beam
! Clean residual mean=-0.000002 rms=0.001515 Jy/beam
! Combined flux in latest and established models = 0.187007 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 33 components and 0.187007 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.098133Jy  sigma=0.181571
! Fit after  self-cal, rms=0.098029Jy  sigma=0.181308
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.989 mas, bmaj=10.75 mas, bpa=3.515 degrees
! Estimated noise=3.88973 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0071782 Jy
! Component: 100  -  total flux cleaned = 0.0111608 Jy
! Component: 150  -  total flux cleaned = 0.013912 Jy
! Component: 200  -  total flux cleaned = 0.0158815 Jy
! Total flux subtracted in 200 components = 0.0158815 Jy
! Clean residual min=-0.005199 max=0.003789 Jy/beam
! Clean residual mean=0.000001 rms=0.001155 Jy/beam
! Combined flux in latest and established models = 0.202888 Jy
! Performing phase self-cal
! Adding 52 model components to the UV plane model.
! The established model now contains 81 components and 0.202888 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.097295Jy  sigma=0.180367
! Fit after  self-cal, rms=0.097283Jy  sigma=0.180314
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        0.95     HN        0.95     KP        0.98     
!   LA        1.09     MK        0.92     NL        0.96     OV        0.98     
!   PT        1.06     SC        0.93     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.03     HN        0.96     KP        0.98     
!   LA        1.02     MK        0.94     NL        0.97     OV        0.98     
!   PT        1.00     SC        0.98     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.12     FD        1.05     HN        1.04     KP        0.99     
!   LA        0.91     MK        1.13     NL        1.11     OV        1.00     
!   PT        1.10     SC        1.01     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.04     HN        1.02     KP        0.94     
!   LA        0.73     MK        1.10     NL        1.04     OV        0.89     
!   PT        0.98     SC        1.19     
! 
! 
! Fit before self-cal, rms=0.097283Jy  sigma=0.180314
! Fit after  self-cal, rms=0.092604Jy  sigma=0.176988
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.017 mas, bmaj=10.77 mas, bpa=3.394 degrees
! Estimated noise=3.88114 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.7902e-05 Jy
! Component: 100  -  total flux cleaned = 0.000109917 Jy
! Component: 150  -  total flux cleaned = 7.60846e-05 Jy
! Component: 200  -  total flux cleaned = 4.83293e-05 Jy
! Total flux subtracted in 200 components = 4.83293e-05 Jy
! Clean residual min=-0.004234 max=0.003760 Jy/beam
! Clean residual mean=-0.000002 rms=0.000841 Jy/beam
! Combined flux in latest and established models = 0.202937 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 98 components and 0.202937 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.092570Jy  sigma=0.176915
! Fit after  self-cal, rms=0.092551Jy  sigma=0.176869
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.092551Jy  sigma=0.176869
! Fit after  self-cal, rms=0.092428Jy  sigma=0.176867
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.017 mas, bmaj=10.77 mas, bpa=3.374 degrees
! Estimated noise=3.87919 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.30677e-05 Jy
! Component: 100  -  total flux cleaned = 2.11693e-05 Jy
! Component: 150  -  total flux cleaned = 9.04865e-08 Jy
! Component: 200  -  total flux cleaned = -1.86324e-05 Jy
! Total flux subtracted in 200 components = -1.86324e-05 Jy
! Clean residual min=-0.004221 max=0.003679 Jy/beam
! Clean residual mean=-0.000002 rms=0.000832 Jy/beam
! Combined flux in latest and established models = 0.202918 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 103 components and 0.202918 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.092415Jy  sigma=0.176843
! Fit after  self-cal, rms=0.092414Jy  sigma=0.176840
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000132501 Jy
! Component: 100  -  total flux cleaned = 9.51091e-05 Jy
! Component: 150  -  total flux cleaned = 9.54039e-05 Jy
! Component: 200  -  total flux cleaned = 9.59608e-05 Jy
! Total flux subtracted in 200 components = 9.59608e-05 Jy
! Clean residual min=-0.004217 max=0.003625 Jy/beam
! Clean residual mean=-0.000002 rms=0.000828 Jy/beam
! Combined flux in latest and established models = 0.203014 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 108 components and 0.203014 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.092407Jy  sigma=0.176828
! Fit after  self-cal, rms=0.092408Jy  sigma=0.176827
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.092408Jy  sigma=0.176827
! Fit after  self-cal, rms=0.092276Jy  sigma=0.176826
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.016 mas, bmaj=10.77 mas, bpa=3.356 degrees
! Estimated noise=3.876 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.35459e-05 Jy
! Component: 100  -  total flux cleaned = -1.34625e-05 Jy
! Component: 150  -  total flux cleaned = 9.41596e-07 Jy
! Component: 200  -  total flux cleaned = 8.58574e-07 Jy
! Total flux subtracted in 200 components = 8.58574e-07 Jy
! Clean residual min=-0.004204 max=0.003589 Jy/beam
! Clean residual mean=-0.000002 rms=0.000826 Jy/beam
! Combined flux in latest and established models = 0.203015 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 111 components and 0.203015 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.092271Jy  sigma=0.176818
! Fit after  self-cal, rms=0.092272Jy  sigma=0.176817
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.94232e-05 Jy
! Component: 100  -  total flux cleaned = 3.92261e-05 Jy
! Component: 150  -  total flux cleaned = 5.17754e-05 Jy
! Component: 200  -  total flux cleaned = 7.52625e-05 Jy
! Total flux subtracted in 200 components = 7.52625e-05 Jy
! Clean residual min=-0.004215 max=0.003544 Jy/beam
! Clean residual mean=-0.000002 rms=0.000825 Jy/beam
! Combined flux in latest and established models = 0.20309 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 112 components and 0.20309 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.092268Jy  sigma=0.176811
! Fit after  self-cal, rms=0.092269Jy  sigma=0.176811
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.092269Jy  sigma=0.176811
! Fit after  self-cal, rms=0.092174Jy  sigma=0.176810
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.153 mas, bmaj=12.24 mas, bpa=1.26 degrees
! Estimated noise=4.82985 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.32075e-05 Jy
! Component: 100  -  total flux cleaned = -0.000165836 Jy
! Component: 150  -  total flux cleaned = -0.000188612 Jy
! Component: 200  -  total flux cleaned = -0.000207266 Jy
! Total flux subtracted in 200 components = -0.000207266 Jy
! Clean residual min=-0.004210 max=0.004058 Jy/beam
! Clean residual mean=-0.000004 rms=0.001106 Jy/beam
! Combined flux in latest and established models = 0.202883 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 120 components and 0.202883 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.092184Jy  sigma=0.176826
! Fit after  self-cal, rms=0.092175Jy  sigma=0.176819
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000142085 Jy
! Component: 100  -  total flux cleaned = -0.000159773 Jy
! Component: 150  -  total flux cleaned = -0.000144255 Jy
! Component: 200  -  total flux cleaned = -0.000144356 Jy
! Total flux subtracted in 200 components = -0.000144356 Jy
! Clean residual min=-0.004101 max=0.003997 Jy/beam
! Clean residual mean=-0.000004 rms=0.001097 Jy/beam
! Combined flux in latest and established models = 0.202738 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 123 components and 0.202738 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.092182Jy  sigma=0.176836
! Fit after  self-cal, rms=0.092180Jy  sigma=0.176833
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.016 mas, bmaj=10.77 mas, bpa=3.344 degrees
! Estimated noise=3.87309 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.016 x 10.77 at 3.344 degrees (North through East)
! Clean map  min=-0.0039904  max=0.14527 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.262 mas, bmaj=10.39 mas, bpa=4.02 degrees
! Estimated noise=7.02843 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0998431 Jy
! Component: 100  -  total flux cleaned = 0.135948 Jy
! Component: 150  -  total flux cleaned = 0.156925 Jy
! Component: 200  -  total flux cleaned = 0.170523 Jy
! Total flux subtracted in 200 components = 0.170523 Jy
! Clean residual min=-0.006431 max=0.007315 Jy/beam
! Clean residual mean=-0.000005 rms=0.001565 Jy/beam
! Combined flux in latest and established models = 0.170523 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 18 model components to the UV plane model.
! The established model now contains 18 components and 0.170523 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.016 mas, bmaj=10.77 mas, bpa=3.344 degrees
! Estimated noise=3.87309 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.013983 Jy
! Component: 100  -  total flux cleaned = 0.0209122 Jy
! Component: 150  -  total flux cleaned = 0.0249422 Jy
! Component: 200  -  total flux cleaned = 0.0275123 Jy
! Total flux subtracted in 200 components = 0.0275123 Jy
! Clean residual min=-0.004064 max=0.003840 Jy/beam
! Clean residual mean=-0.000003 rms=0.000902 Jy/beam
! Combined flux in latest and established models = 0.198035 Jy
! Adding 41 model components to the UV plane model.
! The established model now contains 50 components and 0.198035 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.153 mas, bmaj=12.24 mas, bpa=1.26 degrees
! Estimated noise=4.82985 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00348109 Jy
! Component: 100  -  total flux cleaned = 0.00450448 Jy
! Component: 150  -  total flux cleaned = 0.0046957 Jy
! Component: 200  -  total flux cleaned = 0.00473437 Jy
! Total flux subtracted in 200 components = 0.00473437 Jy
! Clean residual min=-0.004173 max=0.003948 Jy/beam
! Clean residual mean=-0.000004 rms=0.001119 Jy/beam
! Combined flux in latest and established models = 0.20277 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.1438e-05 Jy
! Component: 100  -  total flux cleaned = 2.91319e-05 Jy
! Component: 150  -  total flux cleaned = 5.33655e-05 Jy
! Component: 200  -  total flux cleaned = 5.24718e-05 Jy
! Total flux subtracted in 200 components = 5.24718e-05 Jy
! Clean residual min=-0.004168 max=0.003942 Jy/beam
! Clean residual mean=-0.000004 rms=0.001105 Jy/beam
! Combined flux in latest and established models = 0.202822 Jy
! Adding 26 model components to the UV plane model.
! The established model now contains 69 components and 0.202822 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.016 mas, bmaj=10.77 mas, bpa=3.344 degrees
! Estimated noise=3.87309 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.12606e-05 Jy
! Component: 100  -  total flux cleaned = 2.98077e-05 Jy
! Component: 150  -  total flux cleaned = 0.000172889 Jy
! Component: 200  -  total flux cleaned = 0.000267898 Jy
! Total flux subtracted in 200 components = 0.000267898 Jy
! Clean residual min=-0.004048 max=0.003555 Jy/beam
! Clean residual mean=-0.000002 rms=0.000825 Jy/beam
! Combined flux in latest and established models = 0.20309 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 82 components and 0.20309 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.092186Jy  sigma=0.176843
! Fit after  self-cal, rms=0.092187Jy  sigma=0.176833
wmodel /g0/scr/pima/npcsb_uvs/J1358+8340_S_map.mod
! Writing 82 model components to file: /g0/scr/pima/npcsb_uvs/J1358+8340_S_map.mod
wobs /g0/scr/pima/npcsb_uvs/J1358+8340_S_uvs.fits
! Writing UV FITS file: /g0/scr/pima/npcsb_uvs/J1358+8340_S_uvs.fits
wwins /g0/scr/pima/npcsb_uvs/J1358+8340_S_map.win
! wwins: Wrote 2 windows to /g0/scr/pima/npcsb_uvs/J1358+8340_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000585301 Jy
! Component: 100  -  total flux cleaned = -0.000916112 Jy
! Component: 150  -  total flux cleaned = -0.00112095 Jy
! Component: 200  -  total flux cleaned = -0.00112045 Jy
! Component: 250  -  total flux cleaned = -0.000939466 Jy
! Component: 300  -  total flux cleaned = -0.000765973 Jy
! Component: 350  -  total flux cleaned = -0.000849742 Jy
! Component: 400  -  total flux cleaned = -0.000685555 Jy
! Component: 450  -  total flux cleaned = -0.000685333 Jy
! Component: 500  -  total flux cleaned = -0.000608216 Jy
! Component: 550  -  total flux cleaned = -0.000383458 Jy
! Component: 600  -  total flux cleaned = -0.000382661 Jy
! Component: 650  -  total flux cleaned = -0.000238596 Jy
! Component: 700  -  total flux cleaned = -0.000204081 Jy
! Component: 750  -  total flux cleaned = -0.000307765 Jy
! Component: 800  -  total flux cleaned = -0.00027351 Jy
! Component: 850  -  total flux cleaned = -0.000306779 Jy
! Component: 900  -  total flux cleaned = -0.000241952 Jy
! Component: 950  -  total flux cleaned = -0.000242249 Jy
! Component: 1000  -  total flux cleaned = -0.00017966 Jy
! Component: 1050  -  total flux cleaned = -0.000179968 Jy
! Component: 1100  -  total flux cleaned = -8.93972e-05 Jy
! Component: 1150  -  total flux cleaned = -0.000119558 Jy
! Component: 1200  -  total flux cleaned = -3.08341e-05 Jy
! Component: 1250  -  total flux cleaned = 5.62512e-05 Jy
! Component: 1300  -  total flux cleaned = 0.000228398 Jy
! Component: 1350  -  total flux cleaned = 0.000340904 Jy
! Component: 1400  -  total flux cleaned = 0.000424804 Jy
! Component: 1450  -  total flux cleaned = 0.000507481 Jy
! Component: 1500  -  total flux cleaned = 0.00061638 Jy
! Component: 1550  -  total flux cleaned = 0.000643591 Jy
! Component: 1600  -  total flux cleaned = 0.000643639 Jy
! Component: 1650  -  total flux cleaned = 0.00067042 Jy
! Component: 1700  -  total flux cleaned = 0.000696745 Jy
! Component: 1750  -  total flux cleaned = 0.000722799 Jy
! Component: 1800  -  total flux cleaned = 0.000671759 Jy
! Component: 1850  -  total flux cleaned = 0.000672083 Jy
! Component: 1900  -  total flux cleaned = 0.000647095 Jy
! Component: 1950  -  total flux cleaned = 0.000597447 Jy
! Component: 2000  -  total flux cleaned = 0.00054866 Jy
! Component: 2050  -  total flux cleaned = 0.000524014 Jy
! Component: 2100  -  total flux cleaned = 0.000428155 Jy
! Component: 2150  -  total flux cleaned = 0.000404637 Jy
! Component: 2200  -  total flux cleaned = 0.000381263 Jy
! Component: 2250  -  total flux cleaned = 0.000404302 Jy
! Component: 2300  -  total flux cleaned = 0.000288931 Jy
! Component: 2350  -  total flux cleaned = 0.000334718 Jy
! Component: 2400  -  total flux cleaned = 0.000334856 Jy
! Component: 2450  -  total flux cleaned = 0.000267376 Jy
! Component: 2500  -  total flux cleaned = 0.000200309 Jy
! Component: 2550  -  total flux cleaned = 0.000244666 Jy
! Component: 2600  -  total flux cleaned = 0.00026627 Jy
! Component: 2650  -  total flux cleaned = 0.000200546 Jy
! Component: 2700  -  total flux cleaned = 0.000156877 Jy
! Component: 2750  -  total flux cleaned = 7.08454e-05 Jy
! Component: 2800  -  total flux cleaned = 7.102e-05 Jy
! Component: 2850  -  total flux cleaned = 4.95268e-05 Jy
! Component: 2900  -  total flux cleaned = -3.43838e-05 Jy
! Component: 2950  -  total flux cleaned = -7.59785e-05 Jy
! Component: 3000  -  total flux cleaned = -9.65973e-05 Jy
! Component: 3050  -  total flux cleaned = -5.55176e-05 Jy
! Component: 3100  -  total flux cleaned = -5.57124e-05 Jy
! Component: 3150  -  total flux cleaned = -0.000137178 Jy
! Component: 3200  -  total flux cleaned = -0.000177337 Jy
! Component: 3250  -  total flux cleaned = -0.000177234 Jy
! Component: 3300  -  total flux cleaned = -0.000177398 Jy
! Component: 3350  -  total flux cleaned = -0.000177271 Jy
! Component: 3400  -  total flux cleaned = -0.000196685 Jy
! Component: 3450  -  total flux cleaned = -0.0001772 Jy
! Component: 3500  -  total flux cleaned = -0.000138418 Jy
! Component: 3550  -  total flux cleaned = -0.000138296 Jy
! Component: 3600  -  total flux cleaned = -0.000119258 Jy
! Component: 3650  -  total flux cleaned = -8.14197e-05 Jy
! Component: 3700  -  total flux cleaned = -6.26674e-05 Jy
! Component: 3750  -  total flux cleaned = -0.000100275 Jy
! Component: 3800  -  total flux cleaned = -8.16482e-05 Jy
! Component: 3850  -  total flux cleaned = -6.30278e-05 Jy
! Component: 3900  -  total flux cleaned = -4.46146e-05 Jy
! Component: 3950  -  total flux cleaned = -6.29105e-05 Jy
! Component: 4000  -  total flux cleaned = -8.12344e-05 Jy
! Component: 4050  -  total flux cleaned = -4.49376e-05 Jy
! Total flux subtracted in 4096 components = -6.31178e-05 Jy
! Clean residual min=-0.001251 max=0.000999 Jy/beam
! Clean residual mean=-0.000000 rms=0.000344 Jy/beam
! Combined flux in latest and established models = 0.203027 Jy
keep
! Adding 324 model components to the UV plane model.
! The established model now contains 406 components and 0.203027 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/g0/scr/pima/npcsb_uvs/J1358+8340_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.016 x 10.77 at 3.344 degrees (North through East)
! Clean map  min=-0.0027642  max=0.14574 Jy/beam
! Writing clean map to FITS file: /g0/scr/pima/npcsb_uvs/J1358+8340_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.145744 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000342912 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.705852 0.705852 1.4117 2.82341 5.64681 11.2936 22.5873 45.1745 90.349
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.001 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.145 
quit
! Quitting program
! Log file /g0/scr/pima/npcsb_uvs/J1358+8340_S_uvs.log closed on Wed Sep 25 00:11:41 2013