! Started logfile: /g0/scr/pima/npcsb_uvs/J1310+3220_X_uvs.log on Wed Sep 25 00:05:54 2013 obs /g0/scr/pima/npcsb_uvs/J1310+3220_X_uva.fits ! Reading UV FITS file: /g0/scr/pima/npcsb_uvs/J1310+3220_X_uva.fits ! AN table 1: 19 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.77076 visibilities/baseline/integration-bin. ! Found source: J1310+3220 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40993e+09 8e+06 1 8e+06 ! 02 2 8.47993e+09 8e+06 1 8e+06 ! 03 3 8.79493e+09 8e+06 1 8e+06 ! 04 4 8.89993e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 2636 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsb_uvs/J1310+3220_X] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 29 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 29 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 29 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 29 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.312273Jy sigma=3.146986 ! Fit after self-cal, rms=0.312223Jy sigma=0.708449 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.709 mas, bmaj=2.136 mas, bpa=17.11 degrees ! Estimated noise=9.40525 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.604643 Jy ! Component: 100 - total flux cleaned = 0.799263 Jy ! Total flux subtracted in 100 components = 0.799263 Jy ! Clean residual min=-0.057996 max=0.092812 Jy/beam ! Clean residual mean=-0.000065 rms=0.014089 Jy/beam ! Combined flux in latest and established models = 0.799263 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.799263 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.250018Jy sigma=0.611227 ! Fit after self-cal, rms=0.249719Jy sigma=0.610692 ! Inverting map ! Added new window around map position (-1.8, 2.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.107169 Jy ! Component: 100 - total flux cleaned = 0.175413 Jy ! Total flux subtracted in 100 components = 0.175413 Jy ! Clean residual min=-0.042886 max=0.038929 Jy/beam ! Clean residual mean=-0.000045 rms=0.008775 Jy/beam ! Combined flux in latest and established models = 0.974676 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 15 components and 0.974676 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.174596Jy sigma=0.420101 ! Fit after self-cal, rms=0.172715Jy sigma=0.416633 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8963 mas, bmaj=2.294 mas, bpa=15.31 degrees ! Estimated noise=5.94423 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0850215 Jy ! Component: 100 - total flux cleaned = 0.140875 Jy ! Component: 150 - total flux cleaned = 0.17922 Jy ! Component: 200 - total flux cleaned = 0.206635 Jy ! Total flux subtracted in 200 components = 0.206635 Jy ! Clean residual min=-0.024103 max=0.026269 Jy/beam ! Clean residual mean=-0.000042 rms=0.006526 Jy/beam ! Combined flux in latest and established models = 1.18131 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 36 components and 1.18131 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117236Jy sigma=0.272621 ! Fit after self-cal, rms=0.114820Jy sigma=0.266688 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.99 HN 1.08 KP 1.01 ! LA 0.99 MK 1.04 NL 1.03 OV 0.99 ! PT 0.98 SC 1.04 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.00 HN 1.07 KP 0.93 ! LA 0.92 MK 0.98 NL 1.01 OV 0.99 ! PT 1.01 SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.00 HN 0.98 KP 0.85 ! LA 0.92 MK 1.02 NL 0.99 OV 0.99 ! PT 1.01 SC 1.00 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.03 HN 0.97 KP 0.90 ! LA 0.93 MK 1.06 NL 0.98 OV 1.04 ! PT 1.09 SC 0.97 ! ! ! Fit before self-cal, rms=0.114820Jy sigma=0.266688 ! Fit after self-cal, rms=0.091326Jy sigma=0.213129 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.905 mas, bmaj=2.311 mas, bpa=15.43 degrees ! Estimated noise=5.84877 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-15.8, 24.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0199702 Jy ! Component: 100 - total flux cleaned = 0.0311847 Jy ! Component: 150 - total flux cleaned = 0.0363285 Jy ! Component: 200 - total flux cleaned = 0.0378686 Jy ! Total flux subtracted in 200 components = 0.0378686 Jy ! Clean residual min=-0.011180 max=0.011120 Jy/beam ! Clean residual mean=-0.000001 rms=0.002427 Jy/beam ! Combined flux in latest and established models = 1.21918 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 65 components and 1.21918 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086793Jy sigma=0.201079 ! Fit after self-cal, rms=0.086468Jy sigma=0.200128 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086468Jy sigma=0.200128 ! Fit after self-cal, rms=0.086096Jy sigma=0.199696 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9054 mas, bmaj=2.311 mas, bpa=15.38 degrees ! Estimated noise=5.83834 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00480158 Jy ! Component: 100 - total flux cleaned = 0.00845591 Jy ! Component: 150 - total flux cleaned = 0.00977705 Jy ! Component: 200 - total flux cleaned = 0.0104843 Jy ! Total flux subtracted in 200 components = 0.0104843 Jy ! Clean residual min=-0.010545 max=0.009010 Jy/beam ! Clean residual mean=-0.000002 rms=0.002183 Jy/beam ! Combined flux in latest and established models = 1.22966 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 81 components and 1.22966 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085311Jy sigma=0.197790 ! Fit after self-cal, rms=0.085190Jy sigma=0.197545 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000513507 Jy ! Component: 100 - total flux cleaned = 0.00157434 Jy ! Component: 150 - total flux cleaned = 0.00192162 Jy ! Component: 200 - total flux cleaned = 0.00212912 Jy ! Total flux subtracted in 200 components = 0.00212912 Jy ! Clean residual min=-0.009980 max=0.008642 Jy/beam ! Clean residual mean=-0.000001 rms=0.002114 Jy/beam ! Combined flux in latest and established models = 1.23179 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 89 components and 1.23179 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084846Jy sigma=0.196779 ! Fit after self-cal, rms=0.084798Jy sigma=0.196690 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084798Jy sigma=0.196690 ! Fit after self-cal, rms=0.084682Jy sigma=0.196505 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9062 mas, bmaj=2.312 mas, bpa=15.35 degrees ! Estimated noise=5.83691 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00137217 Jy ! Component: 100 - total flux cleaned = 0.00261921 Jy ! Component: 150 - total flux cleaned = 0.00339088 Jy ! Component: 200 - total flux cleaned = 0.00330335 Jy ! Total flux subtracted in 200 components = 0.00330335 Jy ! Clean residual min=-0.009716 max=0.008213 Jy/beam ! Clean residual mean=-0.000002 rms=0.002040 Jy/beam ! Combined flux in latest and established models = 1.2351 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 97 components and 1.2351 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084418Jy sigma=0.195906 ! Fit after self-cal, rms=0.084390Jy sigma=0.195845 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000300609 Jy ! Component: 100 - total flux cleaned = 0.000563615 Jy ! Component: 150 - total flux cleaned = 0.000803869 Jy ! Component: 200 - total flux cleaned = 0.000880791 Jy ! Total flux subtracted in 200 components = 0.000880791 Jy ! Clean residual min=-0.009333 max=0.007981 Jy/beam ! Clean residual mean=-0.000001 rms=0.002012 Jy/beam ! Combined flux in latest and established models = 1.23598 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 103 components and 1.23598 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084237Jy sigma=0.195506 ! Fit after self-cal, rms=0.084226Jy sigma=0.195482 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084226Jy sigma=0.195482 ! Fit after self-cal, rms=0.084191Jy sigma=0.195421 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.197 mas, bmaj=2.91 mas, bpa=10.99 degrees ! Estimated noise=7.1228 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00181268 Jy ! Component: 100 - total flux cleaned = 0.0021299 Jy ! Component: 150 - total flux cleaned = 0.00222864 Jy ! Component: 200 - total flux cleaned = 0.00240245 Jy ! Total flux subtracted in 200 components = 0.00240245 Jy ! Clean residual min=-0.010061 max=0.010353 Jy/beam ! Clean residual mean=-0.000001 rms=0.003174 Jy/beam ! Combined flux in latest and established models = 1.23838 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 125 components and 1.23838 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084151Jy sigma=0.195277 ! Fit after self-cal, rms=0.084134Jy sigma=0.195230 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000373877 Jy ! Component: 100 - total flux cleaned = 0.00045242 Jy ! Component: 150 - total flux cleaned = 0.000529357 Jy ! Component: 200 - total flux cleaned = 0.000600546 Jy ! Total flux subtracted in 200 components = 0.000600546 Jy ! Clean residual min=-0.009879 max=0.010355 Jy/beam ! Clean residual mean=-0.000001 rms=0.003140 Jy/beam ! Combined flux in latest and established models = 1.23898 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 131 components and 1.23898 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084123Jy sigma=0.195186 ! Fit after self-cal, rms=0.084117Jy sigma=0.195167 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=0.9069 mas, bmaj=2.312 mas, bpa=15.33 degrees ! Estimated noise=5.83672 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9069 x 2.312 at 15.33 degrees (North through East) ! Clean map min=-0.008202 max=0.82911 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084117Jy sigma=0.195167 ! Fit after self-cal, rms=0.079235Jy sigma=0.180147 ! Inverting map and beam ! Estimated beam: bmin=0.9072 mas, bmaj=2.313 mas, bpa=15.31 degrees ! Estimated noise=5.84051 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000257116 Jy ! Component: 100 - total flux cleaned = 0.000345082 Jy ! Component: 150 - total flux cleaned = 0.000655171 Jy ! Component: 200 - total flux cleaned = 0.000724148 Jy ! Total flux subtracted in 200 components = 0.000724148 Jy ! Clean residual min=-0.008174 max=0.008171 Jy/beam ! Clean residual mean=-0.000002 rms=0.001903 Jy/beam ! Combined flux in latest and established models = 1.2397 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 140 components and 1.2397 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079068Jy sigma=0.179772 ! Fit after self-cal, rms=0.079061Jy sigma=0.179753 ! Inverting map ! Added new window around map position (1.4, -20.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00728273 Jy ! Component: 100 - total flux cleaned = 0.0107141 Jy ! Component: 150 - total flux cleaned = 0.0126482 Jy ! Component: 200 - total flux cleaned = 0.0147031 Jy ! Total flux subtracted in 200 components = 0.0147031 Jy ! Clean residual min=-0.007304 max=0.006799 Jy/beam ! Clean residual mean=-0.000003 rms=0.001588 Jy/beam ! Combined flux in latest and established models = 1.25441 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 164 components and 1.25441 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078304Jy sigma=0.177714 ! Fit after self-cal, rms=0.078291Jy sigma=0.177664 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078291Jy sigma=0.177664 ! Fit after self-cal, rms=0.078236Jy sigma=0.177571 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7168 mas, bmaj=2.149 mas, bpa=17.08 degrees ! Estimated noise=9.32072 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.598652 Jy ! Component: 100 - total flux cleaned = 0.788532 Jy ! Component: 150 - total flux cleaned = 0.895152 Jy ! Component: 200 - total flux cleaned = 0.964374 Jy ! Total flux subtracted in 200 components = 0.964374 Jy ! Clean residual min=-0.027863 max=0.041258 Jy/beam ! Clean residual mean=-0.000038 rms=0.007385 Jy/beam ! Combined flux in latest and established models = 0.964374 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.964374 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9077 mas, bmaj=2.313 mas, bpa=15.3 degrees ! Estimated noise=5.83747 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0795579 Jy ! Component: 100 - total flux cleaned = 0.131019 Jy ! Component: 150 - total flux cleaned = 0.165725 Jy ! Component: 200 - total flux cleaned = 0.190056 Jy ! Total flux subtracted in 200 components = 0.190056 Jy ! Clean residual min=-0.012372 max=0.016757 Jy/beam ! Clean residual mean=-0.000034 rms=0.004180 Jy/beam ! Combined flux in latest and established models = 1.15443 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 42 components and 1.15443 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.198 mas, bmaj=2.913 mas, bpa=10.95 degrees ! Estimated noise=7.11589 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0301036 Jy ! Component: 100 - total flux cleaned = 0.0481554 Jy ! Component: 150 - total flux cleaned = 0.0610753 Jy ! Component: 200 - total flux cleaned = 0.0708983 Jy ! Total flux subtracted in 200 components = 0.0708983 Jy ! Clean residual min=-0.009860 max=0.012044 Jy/beam ! Clean residual mean=-0.000018 rms=0.003351 Jy/beam ! Combined flux in latest and established models = 1.22533 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00776973 Jy ! Component: 100 - total flux cleaned = 0.0140229 Jy ! Component: 150 - total flux cleaned = 0.0191077 Jy ! Component: 200 - total flux cleaned = 0.0232826 Jy ! Total flux subtracted in 200 components = 0.0232826 Jy ! Clean residual min=-0.008302 max=0.008745 Jy/beam ! Clean residual mean=-0.000006 rms=0.002502 Jy/beam ! Combined flux in latest and established models = 1.24861 Jy ! Adding 89 model components to the UV plane model. ! The established model now contains 118 components and 1.24861 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9077 mas, bmaj=2.313 mas, bpa=15.3 degrees ! Estimated noise=5.83747 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00132599 Jy ! Component: 100 - total flux cleaned = 0.00379787 Jy ! Component: 150 - total flux cleaned = 0.00602545 Jy ! Component: 200 - total flux cleaned = 0.0078735 Jy ! Total flux subtracted in 200 components = 0.0078735 Jy ! Clean residual min=-0.007462 max=0.007431 Jy/beam ! Clean residual mean=-0.000002 rms=0.001750 Jy/beam ! Combined flux in latest and established models = 1.25649 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 141 components and 1.25648 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079488Jy sigma=0.180106 ! Fit after self-cal, rms=0.079290Jy sigma=0.179656 wmodel /g0/scr/pima/npcsb_uvs/J1310+3220_X_map.mod ! Writing 141 model components to file: /g0/scr/pima/npcsb_uvs/J1310+3220_X_map.mod wobs /g0/scr/pima/npcsb_uvs/J1310+3220_X_uvs.fits ! Writing UV FITS file: /g0/scr/pima/npcsb_uvs/J1310+3220_X_uvs.fits wwins /g0/scr/pima/npcsb_uvs/J1310+3220_X_map.win ! wwins: Wrote 4 windows to /g0/scr/pima/npcsb_uvs/J1310+3220_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000144559 Jy ! Component: 100 - total flux cleaned = 0.000218908 Jy ! Component: 150 - total flux cleaned = 0.000105063 Jy ! Component: 200 - total flux cleaned = -0.000108344 Jy ! Component: 250 - total flux cleaned = -0.000107772 Jy ! Component: 300 - total flux cleaned = -0.000301204 Jy ! Component: 350 - total flux cleaned = -0.000393049 Jy ! Component: 400 - total flux cleaned = -0.000396782 Jy ! Component: 450 - total flux cleaned = -0.000310442 Jy ! Component: 500 - total flux cleaned = -0.000227602 Jy ! Component: 550 - total flux cleaned = -0.000147173 Jy ! Component: 600 - total flux cleaned = 8.68906e-06 Jy ! Component: 650 - total flux cleaned = -6.69169e-05 Jy ! Component: 700 - total flux cleaned = -0.00043264 Jy ! Component: 750 - total flux cleaned = -0.00057513 Jy ! Component: 800 - total flux cleaned = -0.000924467 Jy ! Component: 850 - total flux cleaned = -0.0010597 Jy ! Component: 900 - total flux cleaned = -0.00132438 Jy ! Component: 950 - total flux cleaned = -0.0013884 Jy ! Component: 1000 - total flux cleaned = -0.00145191 Jy ! Component: 1050 - total flux cleaned = -0.0017018 Jy ! Component: 1100 - total flux cleaned = -0.00188565 Jy ! Component: 1150 - total flux cleaned = -0.00200544 Jy ! Component: 1200 - total flux cleaned = -0.00229813 Jy ! Component: 1250 - total flux cleaned = -0.00247093 Jy ! Component: 1300 - total flux cleaned = -0.00275271 Jy ! Component: 1350 - total flux cleaned = -0.00280709 Jy ! Component: 1400 - total flux cleaned = -0.00280686 Jy ! Component: 1450 - total flux cleaned = -0.00291445 Jy ! Component: 1500 - total flux cleaned = -0.0030203 Jy ! Component: 1550 - total flux cleaned = -0.00312428 Jy ! Component: 1600 - total flux cleaned = -0.00322559 Jy ! Component: 1650 - total flux cleaned = -0.00307473 Jy ! Component: 1700 - total flux cleaned = -0.00312356 Jy ! Component: 1750 - total flux cleaned = -0.00302536 Jy ! Component: 1800 - total flux cleaned = -0.00302508 Jy ! Component: 1850 - total flux cleaned = -0.00297771 Jy ! Component: 1900 - total flux cleaned = -0.00302436 Jy ! Component: 1950 - total flux cleaned = -0.00311623 Jy ! Component: 2000 - total flux cleaned = -0.00307083 Jy ! Component: 2050 - total flux cleaned = -0.00311525 Jy ! Component: 2100 - total flux cleaned = -0.0031593 Jy ! Component: 2150 - total flux cleaned = -0.00315884 Jy ! Component: 2200 - total flux cleaned = -0.0032009 Jy ! Component: 2250 - total flux cleaned = -0.0032003 Jy ! Component: 2300 - total flux cleaned = -0.00324128 Jy ! Component: 2350 - total flux cleaned = -0.00307487 Jy ! Component: 2400 - total flux cleaned = -0.00307462 Jy ! Component: 2450 - total flux cleaned = -0.00299402 Jy ! Component: 2500 - total flux cleaned = -0.00295429 Jy ! Component: 2550 - total flux cleaned = -0.00291528 Jy ! Component: 2600 - total flux cleaned = -0.00291527 Jy ! Component: 2650 - total flux cleaned = -0.00264517 Jy ! Component: 2700 - total flux cleaned = -0.00272197 Jy ! Component: 2750 - total flux cleaned = -0.00264617 Jy ! Component: 2800 - total flux cleaned = -0.00242146 Jy ! Component: 2850 - total flux cleaned = -0.0024959 Jy ! Component: 2900 - total flux cleaned = -0.00249606 Jy ! Component: 2950 - total flux cleaned = -0.00242326 Jy ! Component: 3000 - total flux cleaned = -0.00235093 Jy ! Component: 3050 - total flux cleaned = -0.00242238 Jy ! Component: 3100 - total flux cleaned = -0.00238666 Jy ! Component: 3150 - total flux cleaned = -0.00249156 Jy ! Component: 3200 - total flux cleaned = -0.00252583 Jy ! Component: 3250 - total flux cleaned = -0.00273248 Jy ! Component: 3300 - total flux cleaned = -0.0027665 Jy ! Component: 3350 - total flux cleaned = -0.00296955 Jy ! Component: 3400 - total flux cleaned = -0.00300322 Jy ! Component: 3450 - total flux cleaned = -0.00320315 Jy ! Component: 3500 - total flux cleaned = -0.00323597 Jy ! Component: 3550 - total flux cleaned = -0.00333427 Jy ! Component: 3600 - total flux cleaned = -0.0034652 Jy ! Component: 3650 - total flux cleaned = -0.00362677 Jy ! Component: 3700 - total flux cleaned = -0.0036584 Jy ! Component: 3750 - total flux cleaned = -0.0038814 Jy ! Component: 3800 - total flux cleaned = -0.00384952 Jy ! Component: 3850 - total flux cleaned = -0.00391281 Jy ! Component: 3900 - total flux cleaned = -0.00413157 Jy ! Component: 3950 - total flux cleaned = -0.00425603 Jy ! Component: 4000 - total flux cleaned = -0.00434876 Jy ! Component: 4050 - total flux cleaned = -0.00450233 Jy ! Total flux subtracted in 4096 components = -0.00468508 Jy ! Clean residual min=-0.001963 max=0.001954 Jy/beam ! Clean residual mean=0.000002 rms=0.000510 Jy/beam ! Combined flux in latest and established models = 1.2518 Jy keep ! Adding 280 model components to the UV plane model. ! The established model now contains 421 components and 1.2518 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/g0/scr/pima/npcsb_uvs/J1310+3220_X\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9077 x 2.313 at 15.3 degrees (North through East) ! Clean map min=-0.0036432 max=0.83089 Jy/beam ! Writing clean map to FITS file: /g0/scr/pima/npcsb_uvs/J1310+3220_X_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.830886 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000496102 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.179123 0.179123 0.358246 0.716491 1.43298 2.86597 5.73193 11.4639 22.9277 45.8554 91.7109 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0014 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.83 quit ! Quitting program ! Log file /g0/scr/pima/npcsb_uvs/J1310+3220_X_uvs.log closed on Wed Sep 25 00:05:59 2013