! Started logfile: /g0/scr/pima/npcsb_uvs/J1307+7649_X_uvs.log on Wed Sep 25 00:05:50 2013
obs /g0/scr/pima/npcsb_uvs/J1307+7649_X_uva.fits
! Reading UV FITS file: /g0/scr/pima/npcsb_uvs/J1307+7649_X_uva.fits
! AN table 1: 45 integrations on 10 of 10 possible baselines.
! Apparent sampling: 0.8 visibilities/baseline/integration-bin.
! Found source: J1307+7649
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.40993e+09        8e+06          1        8e+06
!  02        2  8.47993e+09        8e+06          1        8e+06
!  03        3  8.79493e+09        8e+06          1        8e+06
!  04        4  8.89993e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 1440 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.2 
print "taper_size =",taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsb_uvs/J1307+7649_X]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=1.022796Jy  sigma=2.628766
! Fit after  self-cal, rms=0.935345Jy  sigma=2.403092
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.481 mas, bmaj=10.86 mas, bpa=14.83 degrees
! Estimated noise=11.3387 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0501323 Jy
! Component: 100  -  total flux cleaned = 0.0620864 Jy
! Total flux subtracted in 100 components = 0.0620864 Jy
! Clean residual min=-0.006837 max=0.006843 Jy/beam
! Clean residual mean=0.000019 rms=0.002810 Jy/beam
! Combined flux in latest and established models = 0.0620864 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 22 components and 0.0620864 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062987Jy  sigma=0.155023
! Fit after  self-cal, rms=0.061374Jy  sigma=0.151570
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.02 mas, bmaj=10.04 mas, bpa=13.7 degrees
! Estimated noise=7.34055 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00426091 Jy
! Component: 100  -  total flux cleaned = 0.00568888 Jy
! Component: 150  -  total flux cleaned = 0.0061833 Jy
! Component: 200  -  total flux cleaned = 0.00649362 Jy
! Total flux subtracted in 200 components = 0.00649362 Jy
! Clean residual min=-0.001486 max=0.001470 Jy/beam
! Clean residual mean=-0.000000 rms=0.000645 Jy/beam
! Combined flux in latest and established models = 0.0685801 Jy
! Performing phase self-cal
! Adding 71 model components to the UV plane model.
! The established model now contains 90 components and 0.0685801 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059609Jy  sigma=0.146727
! Fit after  self-cal, rms=0.059317Jy  sigma=0.146265
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.01     KP        0.99     LA        1.00     OV        1.12     
!   PT        0.93     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.03     KP        1.03     LA        0.93     OV        0.93     
!   PT        0.97     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.90     KP        0.89     LA        0.97     OV        0.98     
!   PT        1.01     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.07     KP        0.98     LA        0.95     OV        1.08     
!   PT        1.06     
! 
! 
! Fit before self-cal, rms=0.059317Jy  sigma=0.146265
! Fit after  self-cal, rms=0.057475Jy  sigma=0.145598
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.054 mas, bmaj=9.957 mas, bpa=13.42 degrees
! Estimated noise=7.16079 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000789302 Jy
! Component: 100  -  total flux cleaned = 0.00127892 Jy
! Component: 150  -  total flux cleaned = 0.00117369 Jy
! Component: 200  -  total flux cleaned = 0.00112342 Jy
! Total flux subtracted in 200 components = 0.00112342 Jy
! Clean residual min=-0.000961 max=0.000932 Jy/beam
! Clean residual mean=0.000001 rms=0.000274 Jy/beam
! Combined flux in latest and established models = 0.0697035 Jy
! Performing phase self-cal
! Adding 60 model components to the UV plane model.
! The established model now contains 148 components and 0.0697035 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057324Jy  sigma=0.145215
! Fit after  self-cal, rms=0.057247Jy  sigma=0.145079
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057247Jy  sigma=0.145079
! Fit after  self-cal, rms=0.057232Jy  sigma=0.145060
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.058 mas, bmaj=9.942 mas, bpa=13.35 degrees
! Estimated noise=7.15881 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000475732 Jy
! Component: 100  -  total flux cleaned = 0.000726928 Jy
! Component: 150  -  total flux cleaned = 0.000868709 Jy
! Component: 200  -  total flux cleaned = 0.000834311 Jy
! Total flux subtracted in 200 components = 0.000834311 Jy
! Clean residual min=-0.000568 max=0.000583 Jy/beam
! Clean residual mean=0.000001 rms=0.000188 Jy/beam
! Combined flux in latest and established models = 0.0705378 Jy
selfcal
! Performing phase self-cal
! Adding 67 model components to the UV plane model.
! The established model now contains 210 components and 0.0705378 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057177Jy  sigma=0.144945
! Fit after  self-cal, rms=0.057160Jy  sigma=0.144923
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000146028 Jy
! Component: 100  -  total flux cleaned = -0.000177257 Jy
! Component: 150  -  total flux cleaned = -0.000146639 Jy
! Component: 200  -  total flux cleaned = -5.11919e-05 Jy
! Total flux subtracted in 200 components = -5.11919e-05 Jy
! Clean residual min=-0.000534 max=0.000520 Jy/beam
! Clean residual mean=0.000001 rms=0.000173 Jy/beam
! Combined flux in latest and established models = 0.0704866 Jy
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 243 components and 0.0704866 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057130Jy  sigma=0.144852
! Fit after  self-cal, rms=0.057130Jy  sigma=0.144847
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057130Jy  sigma=0.144847
! Fit after  self-cal, rms=0.056789Jy  sigma=0.144833
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.057 mas, bmaj=9.933 mas, bpa=13.31 degrees
! Estimated noise=7.11142 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000212075 Jy
! Component: 100  -  total flux cleaned = 0.000185593 Jy
! Component: 150  -  total flux cleaned = 0.000130311 Jy
! Component: 200  -  total flux cleaned = 0.000104187 Jy
! Total flux subtracted in 200 components = 0.000104187 Jy
! Clean residual min=-0.000450 max=0.000449 Jy/beam
! Clean residual mean=0.000001 rms=0.000159 Jy/beam
! Combined flux in latest and established models = 0.0705907 Jy
selfcal
! Performing phase self-cal
! Adding 58 model components to the UV plane model.
! The established model now contains 290 components and 0.0705907 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.056762Jy  sigma=0.144781
! Fit after  self-cal, rms=0.056763Jy  sigma=0.144777
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00016996 Jy
! Component: 100  -  total flux cleaned = -0.00026672 Jy
! Component: 150  -  total flux cleaned = -0.000319981 Jy
! Component: 200  -  total flux cleaned = -0.000380193 Jy
! Total flux subtracted in 200 components = -0.000380193 Jy
! Clean residual min=-0.000485 max=0.000484 Jy/beam
! Clean residual mean=0.000002 rms=0.000164 Jy/beam
! Combined flux in latest and established models = 0.0702105 Jy
! Performing phase self-cal
! Adding 44 model components to the UV plane model.
! The established model now contains 324 components and 0.0702106 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.056745Jy  sigma=0.144741
! Fit after  self-cal, rms=0.056744Jy  sigma=0.144736
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.056744Jy  sigma=0.144736
! Fit after  self-cal, rms=0.056496Jy  sigma=0.144729
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.222 mas, bmaj=9.819 mas, bpa=13.5 degrees
! Estimated noise=7.08577 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.56729e-05 Jy
! Component: 100  -  total flux cleaned = 7.77971e-05 Jy
! Component: 150  -  total flux cleaned = 9.88812e-05 Jy
! Component: 200  -  total flux cleaned = 9.76965e-05 Jy
! Total flux subtracted in 200 components = 9.76965e-05 Jy
! Clean residual min=-0.000381 max=0.000391 Jy/beam
! Clean residual mean=0.000002 rms=0.000136 Jy/beam
! Combined flux in latest and established models = 0.0703083 Jy
selfcal
! Performing phase self-cal
! Adding 55 model components to the UV plane model.
! The established model now contains 360 components and 0.0703082 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.056476Jy  sigma=0.144693
! Fit after  self-cal, rms=0.056479Jy  sigma=0.144690
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.29756e-05 Jy
! Component: 100  -  total flux cleaned = -0.000133929 Jy
! Component: 150  -  total flux cleaned = -0.000113378 Jy
! Component: 200  -  total flux cleaned = -0.000111228 Jy
! Total flux subtracted in 200 components = -0.000111228 Jy
! Clean residual min=-0.000353 max=0.000362 Jy/beam
! Clean residual mean=0.000001 rms=0.000121 Jy/beam
! Combined flux in latest and established models = 0.070197 Jy
! Performing phase self-cal
! Adding 55 model components to the UV plane model.
! The established model now contains 398 components and 0.070197 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.056465Jy  sigma=0.144662
! Fit after  self-cal, rms=0.056465Jy  sigma=0.144660
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=4.057 mas, bmaj=9.921 mas, bpa=13.27 degrees
! Estimated noise=7.07823 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.057 x 9.921 at 13.27 degrees (North through East)
! Clean map  min=-0.0038712  max=0.059669 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.505 mas, bmaj=10.73 mas, bpa=14.65 degrees
! Estimated noise=11.0804 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0492368 Jy
! Component: 100  -  total flux cleaned = 0.0606589 Jy
! Component: 150  -  total flux cleaned = 0.0650783 Jy
! Component: 200  -  total flux cleaned = 0.0658632 Jy
! Total flux subtracted in 200 components = 0.0658632 Jy
! Clean residual min=-0.002890 max=0.002895 Jy/beam
! Clean residual mean=0.000006 rms=0.001175 Jy/beam
! Combined flux in latest and established models = 0.0658632 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 44 model components to the UV plane model.
! The established model now contains 44 components and 0.0658632 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.057 mas, bmaj=9.921 mas, bpa=13.27 degrees
! Estimated noise=7.07823 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00276743 Jy
! Component: 100  -  total flux cleaned = -0.00264591 Jy
! Component: 150  -  total flux cleaned = -0.00232697 Jy
! Component: 200  -  total flux cleaned = -0.0025032 Jy
! Total flux subtracted in 200 components = -0.0025032 Jy
! Clean residual min=-0.001472 max=0.001407 Jy/beam
! Clean residual mean=0.000001 rms=0.000512 Jy/beam
! Combined flux in latest and established models = 0.06336 Jy
! Adding 46 model components to the UV plane model.
! The established model now contains 90 components and 0.06336 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.222 mas, bmaj=9.819 mas, bpa=13.5 degrees
! Estimated noise=7.08577 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000266828 Jy
! Component: 100  -  total flux cleaned = -7.85123e-05 Jy
! Component: 150  -  total flux cleaned = 0.000410021 Jy
! Component: 200  -  total flux cleaned = 0.000411346 Jy
! Total flux subtracted in 200 components = 0.000411346 Jy
! Clean residual min=-0.000608 max=0.000602 Jy/beam
! Clean residual mean=0.000000 rms=0.000219 Jy/beam
! Combined flux in latest and established models = 0.0637713 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000256719 Jy
! Component: 100  -  total flux cleaned = -0.000291023 Jy
! Component: 150  -  total flux cleaned = -0.00041099 Jy
! Component: 200  -  total flux cleaned = -0.000457877 Jy
! Total flux subtracted in 200 components = -0.000457877 Jy
! Clean residual min=-0.000786 max=0.000805 Jy/beam
! Clean residual mean=0.000002 rms=0.000283 Jy/beam
! Combined flux in latest and established models = 0.0633134 Jy
! Adding 81 model components to the UV plane model.
! The established model now contains 169 components and 0.0633134 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=4.057 mas, bmaj=9.921 mas, bpa=13.27 degrees
! Estimated noise=7.07823 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000299655 Jy
! Component: 100  -  total flux cleaned = -0.000341417 Jy
! Component: 150  -  total flux cleaned = -0.000313052 Jy
! Component: 200  -  total flux cleaned = -0.000313883 Jy
! Total flux subtracted in 200 components = -0.000313883 Jy
! Clean residual min=-0.000441 max=0.000438 Jy/beam
! Clean residual mean=0.000001 rms=0.000156 Jy/beam
! Combined flux in latest and established models = 0.0629995 Jy
selfcal
! Performing phase self-cal
! Adding 52 model components to the UV plane model.
! The established model now contains 221 components and 0.0629995 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.056502Jy  sigma=0.144744
! Fit after  self-cal, rms=0.056495Jy  sigma=0.144735
wmodel /g0/scr/pima/npcsb_uvs/J1307+7649_X_map.mod
! Writing 221 model components to file: /g0/scr/pima/npcsb_uvs/J1307+7649_X_map.mod
wobs /g0/scr/pima/npcsb_uvs/J1307+7649_X_uvs.fits
! Writing UV FITS file: /g0/scr/pima/npcsb_uvs/J1307+7649_X_uvs.fits
wwins /g0/scr/pima/npcsb_uvs/J1307+7649_X_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
![Exited script file: /home/lpetrov/bin/01_muppet]
! 
wmap "/g0/scr/pima/npcsb_uvs/J1307+7649_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.057 x 9.921 at 13.27 degrees (North through East)
! Clean map  min=-0.0051757  max=0.054888 Jy/beam
! Writing clean map to FITS file: /g0/scr/pima/npcsb_uvs/J1307+7649_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0548882 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000154624 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.845122 0.845122 1.69024 3.38049 6.76097 13.5219 27.0439 54.0878
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0004 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.054 
quit
! Quitting program
! Log file /g0/scr/pima/npcsb_uvs/J1307+7649_X_uvs.log closed on Wed Sep 25 00:05:53 2013