! Started logfile: /g0/scr/pima/npcsb_uvs/J1307+7649_S_uvs.log on Wed Sep 25 00:11:26 2013 obs /g0/scr/pima/npcsb_uvs/J1307+7649_S_uva.fits ! Reading UV FITS file: /g0/scr/pima/npcsb_uvs/J1307+7649_S_uva.fits ! AN table 1: 45 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.922469 visibilities/baseline/integration-bin. ! Found source: J1307+7649 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23693e+09 8e+06 1 8e+06 ! 02 2 2.26693e+09 8e+06 1 8e+06 ! 03 3 2.35693e+09 8e+06 1 8e+06 ! 04 4 2.37693e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 7472 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsb_uvs/J1307+7649_S] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.993546Jy sigma=2.185653 ! Fit after self-cal, rms=0.871578Jy sigma=1.900483 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.847 mas, bmaj=9.971 mas, bpa=-4.892 degrees ! Estimated noise=8.08167 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0882751 Jy ! Component: 100 - total flux cleaned = 0.13023 Jy ! Total flux subtracted in 100 components = 0.13023 Jy ! Clean residual min=-0.013463 max=0.021631 Jy/beam ! Clean residual mean=0.000021 rms=0.004697 Jy/beam ! Combined flux in latest and established models = 0.13023 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.13023 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123656Jy sigma=0.249866 ! Fit after self-cal, rms=0.123177Jy sigma=0.248975 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.405 mas, bmaj=10.43 mas, bpa=-4.434 degrees ! Estimated noise=3.82236 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0434972 Jy ! Component: 100 - total flux cleaned = 0.0678667 Jy ! Component: 150 - total flux cleaned = 0.0841845 Jy ! Component: 200 - total flux cleaned = 0.0956558 Jy ! Total flux subtracted in 200 components = 0.0956558 Jy ! Clean residual min=-0.015669 max=0.025317 Jy/beam ! Clean residual mean=0.000027 rms=0.004890 Jy/beam ! Combined flux in latest and established models = 0.225885 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 52 components and 0.225886 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104865Jy sigma=0.209312 ! Fit after self-cal, rms=0.104520Jy sigma=0.208787 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.96 HN 0.95 KP 0.83 ! LA 0.90 MK 1.01 NL 1.19 OV 1.10 ! PT 0.95 SC 0.89 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.98 HN 0.98 KP 0.87 ! LA 0.88 MK 0.96 NL 1.24 OV 1.17 ! PT 0.91 SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.97 HN 0.94 KP 0.91 ! LA 0.71 MK 1.27 NL 1.38 OV 1.27 ! PT 1.01 SC 0.96 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 0.96 HN 0.96 KP 0.82 ! LA 0.60 MK 1.18 NL 1.37 OV 1.07 ! PT 0.90 SC 0.94 ! ! ! Fit before self-cal, rms=0.104520Jy sigma=0.208787 ! Fit after self-cal, rms=0.092409Jy sigma=0.195906 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.475 mas, bmaj=10.3 mas, bpa=-4.948 degrees ! Estimated noise=3.73163 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (64, -11.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0160792 Jy ! Component: 100 - total flux cleaned = 0.0212986 Jy ! Component: 150 - total flux cleaned = 0.0236601 Jy ! Component: 200 - total flux cleaned = 0.0247977 Jy ! Total flux subtracted in 200 components = 0.0247977 Jy ! Clean residual min=-0.010189 max=0.012423 Jy/beam ! Clean residual mean=-0.000028 rms=0.003219 Jy/beam ! Combined flux in latest and established models = 0.250683 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 75 components and 0.250683 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089695Jy sigma=0.189536 ! Fit after self-cal, rms=0.089509Jy sigma=0.188465 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089509Jy sigma=0.188465 ! Fit after self-cal, rms=0.087895Jy sigma=0.187877 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.476 mas, bmaj=10.37 mas, bpa=-4.852 degrees ! Estimated noise=3.70375 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00569011 Jy ! Component: 100 - total flux cleaned = 0.0065751 Jy ! Component: 150 - total flux cleaned = 0.00759933 Jy ! Component: 200 - total flux cleaned = 0.00828606 Jy ! Total flux subtracted in 200 components = 0.00828606 Jy ! Clean residual min=-0.010090 max=0.012591 Jy/beam ! Clean residual mean=-0.000023 rms=0.002973 Jy/beam ! Combined flux in latest and established models = 0.258969 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 100 components and 0.258969 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087410Jy sigma=0.186684 ! Fit after self-cal, rms=0.087393Jy sigma=0.186535 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00226269 Jy ! Component: 100 - total flux cleaned = 0.00303235 Jy ! Component: 150 - total flux cleaned = 0.00337752 Jy ! Component: 200 - total flux cleaned = 0.00385808 Jy ! Total flux subtracted in 200 components = 0.00385808 Jy ! Clean residual min=-0.010140 max=0.012215 Jy/beam ! Clean residual mean=-0.000021 rms=0.002917 Jy/beam ! Combined flux in latest and established models = 0.262827 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 113 components and 0.262827 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087211Jy sigma=0.186154 ! Fit after self-cal, rms=0.087230Jy sigma=0.186120 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087230Jy sigma=0.186120 ! Fit after self-cal, rms=0.087468Jy sigma=0.186003 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.498 mas, bmaj=10.38 mas, bpa=-4.955 degrees ! Estimated noise=3.71262 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00125283 Jy ! Component: 100 - total flux cleaned = 0.00159197 Jy ! Component: 150 - total flux cleaned = 0.00189206 Jy ! Component: 200 - total flux cleaned = 0.00210342 Jy ! Total flux subtracted in 200 components = 0.00210342 Jy ! Clean residual min=-0.010022 max=0.011960 Jy/beam ! Clean residual mean=-0.000021 rms=0.002889 Jy/beam ! Combined flux in latest and established models = 0.264931 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 121 components and 0.264931 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087330Jy sigma=0.185681 ! Fit after self-cal, rms=0.087348Jy sigma=0.185652 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00101346 Jy ! Component: 100 - total flux cleaned = 0.00149392 Jy ! Component: 150 - total flux cleaned = 0.00181495 Jy ! Component: 200 - total flux cleaned = 0.00211855 Jy ! Total flux subtracted in 200 components = 0.00211855 Jy ! Clean residual min=-0.009913 max=0.011666 Jy/beam ! Clean residual mean=-0.000020 rms=0.002866 Jy/beam ! Combined flux in latest and established models = 0.267049 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 131 components and 0.267049 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087258Jy sigma=0.185460 ! Fit after self-cal, rms=0.087275Jy sigma=0.185444 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087275Jy sigma=0.185444 ! Fit after self-cal, rms=0.087144Jy sigma=0.185421 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.594 mas, bmaj=11.74 mas, bpa=-6.31 degrees ! Estimated noise=4.35641 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000684849 Jy ! Component: 100 - total flux cleaned = 0.000875145 Jy ! Component: 150 - total flux cleaned = 0.00113296 Jy ! Component: 200 - total flux cleaned = 0.00129108 Jy ! Total flux subtracted in 200 components = 0.00129108 Jy ! Clean residual min=-0.017005 max=0.017041 Jy/beam ! Clean residual mean=-0.000038 rms=0.005112 Jy/beam ! Combined flux in latest and established models = 0.26834 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 141 components and 0.26834 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087108Jy sigma=0.185253 ! Fit after self-cal, rms=0.087099Jy sigma=0.185225 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00013224 Jy ! Component: 100 - total flux cleaned = 0.000281419 Jy ! Component: 150 - total flux cleaned = 0.000425035 Jy ! Component: 200 - total flux cleaned = 0.000630123 Jy ! Total flux subtracted in 200 components = 0.000630123 Jy ! Clean residual min=-0.016946 max=0.016781 Jy/beam ! Clean residual mean=-0.000037 rms=0.005093 Jy/beam ! Combined flux in latest and established models = 0.26897 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 148 components and 0.26897 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087082Jy sigma=0.185159 ! Fit after self-cal, rms=0.087074Jy sigma=0.185136 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.505 mas, bmaj=10.38 mas, bpa=-5.003 degrees ! Estimated noise=3.7057 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.505 x 10.38 at -5.003 degrees (North through East) ! Clean map min=-0.0098095 max=0.13595 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.889 mas, bmaj=9.782 mas, bpa=-5.557 degrees ! Estimated noise=8.00186 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0867897 Jy ! Component: 100 - total flux cleaned = 0.129254 Jy ! Component: 150 - total flux cleaned = 0.157 Jy ! Component: 200 - total flux cleaned = 0.176995 Jy ! Total flux subtracted in 200 components = 0.176995 Jy ! Clean residual min=-0.011005 max=0.012872 Jy/beam ! Clean residual mean=0.000001 rms=0.003101 Jy/beam ! Combined flux in latest and established models = 0.176995 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 29 model components to the UV plane model. ! The established model now contains 29 components and 0.176995 Jy ! Inverting map and beam ! Estimated beam: bmin=3.505 mas, bmaj=10.38 mas, bpa=-5.003 degrees ! Estimated noise=3.7057 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0221743 Jy ! Component: 100 - total flux cleaned = 0.0365037 Jy ! Component: 150 - total flux cleaned = 0.0471634 Jy ! Component: 200 - total flux cleaned = 0.0553381 Jy ! Total flux subtracted in 200 components = 0.0553381 Jy ! Clean residual min=-0.010761 max=0.013349 Jy/beam ! Clean residual mean=-0.000013 rms=0.003183 Jy/beam ! Combined flux in latest and established models = 0.232333 Jy ! Adding 54 model components to the UV plane model. ! The established model now contains 73 components and 0.232333 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.594 mas, bmaj=11.74 mas, bpa=-6.31 degrees ! Estimated noise=4.35641 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0112844 Jy ! Component: 100 - total flux cleaned = 0.0188598 Jy ! Component: 150 - total flux cleaned = 0.0242071 Jy ! Component: 200 - total flux cleaned = 0.026836 Jy ! Total flux subtracted in 200 components = 0.026836 Jy ! Clean residual min=-0.017399 max=0.018402 Jy/beam ! Clean residual mean=-0.000030 rms=0.005123 Jy/beam ! Combined flux in latest and established models = 0.259169 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00167618 Jy ! Component: 100 - total flux cleaned = 0.00291662 Jy ! Component: 150 - total flux cleaned = 0.00380744 Jy ! Component: 200 - total flux cleaned = 0.00452548 Jy ! Total flux subtracted in 200 components = 0.00452548 Jy ! Clean residual min=-0.017520 max=0.017819 Jy/beam ! Clean residual mean=-0.000028 rms=0.005098 Jy/beam ! Combined flux in latest and established models = 0.263694 Jy ! Adding 54 model components to the UV plane model. ! The established model now contains 120 components and 0.263694 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.505 mas, bmaj=10.38 mas, bpa=-5.003 degrees ! Estimated noise=3.7057 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00109538 Jy ! Component: 100 - total flux cleaned = 0.00159414 Jy ! Component: 150 - total flux cleaned = 0.00191108 Jy ! Component: 200 - total flux cleaned = 0.00219305 Jy ! Total flux subtracted in 200 components = 0.00219305 Jy ! Clean residual min=-0.010059 max=0.011891 Jy/beam ! Clean residual mean=-0.000019 rms=0.002831 Jy/beam ! Combined flux in latest and established models = 0.265887 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 136 components and 0.265887 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087212Jy sigma=0.185464 ! Fit after self-cal, rms=0.087162Jy sigma=0.185387 wmodel /g0/scr/pima/npcsb_uvs/J1307+7649_S_map.mod ! Writing 136 model components to file: /g0/scr/pima/npcsb_uvs/J1307+7649_S_map.mod wobs /g0/scr/pima/npcsb_uvs/J1307+7649_S_uvs.fits ! Writing UV FITS file: /g0/scr/pima/npcsb_uvs/J1307+7649_S_uvs.fits wwins /g0/scr/pima/npcsb_uvs/J1307+7649_S_map.win ! wwins: Wrote 2 windows to /g0/scr/pima/npcsb_uvs/J1307+7649_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00175482 Jy ! Component: 100 - total flux cleaned = 0.00108175 Jy ! Component: 150 - total flux cleaned = 0.000641809 Jy ! Component: 200 - total flux cleaned = 0.00131594 Jy ! Component: 250 - total flux cleaned = 0.0019494 Jy ! Component: 300 - total flux cleaned = 0.0029119 Jy ! Component: 350 - total flux cleaned = 0.0038205 Jy ! Component: 400 - total flux cleaned = 0.00435654 Jy ! Component: 450 - total flux cleaned = 0.00466548 Jy ! Component: 500 - total flux cleaned = 0.00535072 Jy ! Component: 550 - total flux cleaned = 0.00599947 Jy ! Component: 600 - total flux cleaned = 0.00653392 Jy ! Component: 650 - total flux cleaned = 0.00712908 Jy ! Component: 700 - total flux cleaned = 0.00762167 Jy ! Component: 750 - total flux cleaned = 0.00824583 Jy ! Component: 800 - total flux cleaned = 0.00884528 Jy ! Component: 850 - total flux cleaned = 0.0094228 Jy ! Component: 900 - total flux cleaned = 0.0102538 Jy ! Component: 950 - total flux cleaned = 0.0107211 Jy ! Component: 1000 - total flux cleaned = 0.0114299 Jy ! Component: 1050 - total flux cleaned = 0.0119915 Jy ! Component: 1100 - total flux cleaned = 0.0124759 Jy ! Component: 1150 - total flux cleaned = 0.012884 Jy ! Component: 1200 - total flux cleaned = 0.0131661 Jy ! Component: 1250 - total flux cleaned = 0.0135483 Jy ! Component: 1300 - total flux cleaned = 0.0137068 Jy ! Component: 1350 - total flux cleaned = 0.0139657 Jy ! Component: 1400 - total flux cleaned = 0.0141672 Jy ! Component: 1450 - total flux cleaned = 0.0145109 Jy ! Component: 1500 - total flux cleaned = 0.0144626 Jy ! Component: 1550 - total flux cleaned = 0.0146033 Jy ! Component: 1600 - total flux cleaned = 0.0146474 Jy ! Component: 1650 - total flux cleaned = 0.014512 Jy ! Component: 1700 - total flux cleaned = 0.0143816 Jy ! Component: 1750 - total flux cleaned = 0.014422 Jy ! Component: 1800 - total flux cleaned = 0.0142562 Jy ! Component: 1850 - total flux cleaned = 0.0143789 Jy ! Component: 1900 - total flux cleaned = 0.0144973 Jy ! Component: 1950 - total flux cleaned = 0.014458 Jy ! Component: 2000 - total flux cleaned = 0.0144965 Jy ! Component: 2050 - total flux cleaned = 0.0146811 Jy ! Component: 2100 - total flux cleaned = 0.0147533 Jy ! Component: 2150 - total flux cleaned = 0.0148963 Jy ! Component: 2200 - total flux cleaned = 0.0150359 Jy ! Component: 2250 - total flux cleaned = 0.0150359 Jy ! Component: 2300 - total flux cleaned = 0.0150368 Jy ! Component: 2350 - total flux cleaned = 0.0151695 Jy ! Component: 2400 - total flux cleaned = 0.0152027 Jy ! Component: 2450 - total flux cleaned = 0.0152665 Jy ! Component: 2500 - total flux cleaned = 0.0153294 Jy ! Component: 2550 - total flux cleaned = 0.0153297 Jy ! Component: 2600 - total flux cleaned = 0.0153296 Jy ! Component: 2650 - total flux cleaned = 0.0154784 Jy ! Component: 2700 - total flux cleaned = 0.0154775 Jy ! Component: 2750 - total flux cleaned = 0.015333 Jy ! Component: 2800 - total flux cleaned = 0.0154184 Jy ! Component: 2850 - total flux cleaned = 0.0153899 Jy ! Component: 2900 - total flux cleaned = 0.0153347 Jy ! Component: 2950 - total flux cleaned = 0.0153342 Jy ! Component: 3000 - total flux cleaned = 0.0152268 Jy ! Component: 3050 - total flux cleaned = 0.0152534 Jy ! Component: 3100 - total flux cleaned = 0.0152794 Jy ! Component: 3150 - total flux cleaned = 0.0152791 Jy ! Component: 3200 - total flux cleaned = 0.0153553 Jy ! Component: 3250 - total flux cleaned = 0.0153553 Jy ! Component: 3300 - total flux cleaned = 0.0153554 Jy ! Component: 3350 - total flux cleaned = 0.0153061 Jy ! Component: 3400 - total flux cleaned = 0.0153063 Jy ! Component: 3450 - total flux cleaned = 0.0153302 Jy ! Component: 3500 - total flux cleaned = 0.0153299 Jy ! Component: 3550 - total flux cleaned = 0.0153299 Jy ! Component: 3600 - total flux cleaned = 0.0153064 Jy ! Component: 3650 - total flux cleaned = 0.0153064 Jy ! Component: 3700 - total flux cleaned = 0.0153291 Jy ! Component: 3750 - total flux cleaned = 0.0152612 Jy ! Component: 3800 - total flux cleaned = 0.0151941 Jy ! Component: 3850 - total flux cleaned = 0.0152164 Jy ! Component: 3900 - total flux cleaned = 0.0151725 Jy ! Component: 3950 - total flux cleaned = 0.0151724 Jy ! Component: 4000 - total flux cleaned = 0.0151075 Jy ! Component: 4050 - total flux cleaned = 0.0150861 Jy ! Total flux subtracted in 4096 components = 0.0151075 Jy ! Clean residual min=-0.001406 max=0.001499 Jy/beam ! Clean residual mean=-0.000003 rms=0.000414 Jy/beam ! Combined flux in latest and established models = 0.280995 Jy keep ! Adding 424 model components to the UV plane model. ! The established model now contains 560 components and 0.280995 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/g0/scr/pima/npcsb_uvs/J1307+7649_S\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.505 x 10.38 at -5.003 degrees (North through East) ! Clean map min=-0.0033833 max=0.13363 Jy/beam ! Writing clean map to FITS file: /g0/scr/pima/npcsb_uvs/J1307+7649_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.133631 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000388825 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.872908 0.872908 1.74582 3.49163 6.98326 13.9665 27.9331 55.8661 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0011 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.133 quit ! Quitting program ! Log file /g0/scr/pima/npcsb_uvs/J1307+7649_S_uvs.log closed on Wed Sep 25 00:11:30 2013