! Started logfile: /g0/scr/pima/npcsb_uvs/J1233+8054_S_uvs.log on Wed Sep 25 00:11:20 2013
obs /g0/scr/pima/npcsb_uvs/J1233+8054_S_uva.fits
! Reading UV FITS file: /g0/scr/pima/npcsb_uvs/J1233+8054_S_uva.fits
! AN table 1: 46 integrations on 45 of 45 possible baselines.
! Apparent sampling: 1 visibilities/baseline/integration-bin.
! Found source: J1233+8054
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23693e+09        8e+06          1        8e+06
!  02        2  2.26693e+09        8e+06          1        8e+06
!  03        3  2.35693e+09        8e+06          1        8e+06
!  04        4  2.37693e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 8280 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsb_uvs/J1233+8054_S]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=1.152081Jy  sigma=2.169653
! Fit after  self-cal, rms=0.880056Jy  sigma=1.494066
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.241 mas, bmaj=10.28 mas, bpa=9.316 degrees
! Estimated noise=8.75139 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.223403 Jy
! Component: 100  -  total flux cleaned = 0.2725 Jy
! Total flux subtracted in 100 components = 0.2725 Jy
! Clean residual min=-0.012783 max=0.031994 Jy/beam
! Clean residual mean=-0.000012 rms=0.003461 Jy/beam
! Combined flux in latest and established models = 0.272499 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.272499 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.539395Jy  sigma=0.217944
! Fit after  self-cal, rms=0.539390Jy  sigma=0.217939
! Inverting map 
! Added new window around map position (6, -7).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0284778 Jy
! Component: 100  -  total flux cleaned = 0.0433853 Jy
! Total flux subtracted in 100 components = 0.0433853 Jy
! Clean residual min=-0.010248 max=0.011703 Jy/beam
! Clean residual mean=-0.000005 rms=0.002477 Jy/beam
! Combined flux in latest and established models = 0.315885 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 13 components and 0.315885 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.537157Jy  sigma=0.195594
! Fit after  self-cal, rms=0.537086Jy  sigma=0.195149
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.006 mas, bmaj=10.67 mas, bpa=7.873 degrees
! Estimated noise=3.80794 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0180244 Jy
! Component: 100  -  total flux cleaned = 0.0288268 Jy
! Component: 150  -  total flux cleaned = 0.0360295 Jy
! Component: 200  -  total flux cleaned = 0.0410464 Jy
! Total flux subtracted in 200 components = 0.0410464 Jy
! Clean residual min=-0.009416 max=0.006646 Jy/beam
! Clean residual mean=-0.000006 rms=0.001825 Jy/beam
! Combined flux in latest and established models = 0.356931 Jy
! Performing phase self-cal
! Adding 40 model components to the UV plane model.
! The established model now contains 51 components and 0.356931 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.536342Jy  sigma=0.188179
! Fit after  self-cal, rms=0.536320Jy  sigma=0.187797
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.98     HN        0.99     KP        0.98     
!   LA        1.10     MK        0.92     NL        0.99     OV        1.01     
!   PT        1.07     SC        0.97     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.01     HN        1.00     KP        0.97     
!   LA        1.07     MK        0.96     NL        0.97     OV        1.01     
!   PT        0.99     SC        1.02     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        1.03     HN        1.02     KP        0.97     
!   LA        0.84     MK        1.06     NL        1.07     OV        1.03     
!   PT        1.08     SC        1.05     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.04     HN        0.97     KP        0.90     
!   LA        0.71     MK        1.08     NL        1.00     OV        0.91     
!   PT        0.93     SC        1.10     
! 
! 
! Fit before self-cal, rms=0.536320Jy  sigma=0.187797
! Fit after  self-cal, rms=0.544009Jy  sigma=0.177351
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.033 mas, bmaj=10.67 mas, bpa=7.821 degrees
! Estimated noise=3.77411 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0025407 Jy
! Component: 100  -  total flux cleaned = 0.00301022 Jy
! Component: 150  -  total flux cleaned = 0.00320883 Jy
! Component: 200  -  total flux cleaned = 0.00332037 Jy
! Total flux subtracted in 200 components = 0.00332037 Jy
! Clean residual min=-0.003555 max=0.004593 Jy/beam
! Clean residual mean=-0.000010 rms=0.000986 Jy/beam
! Combined flux in latest and established models = 0.360252 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 79 components and 0.360252 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.544000Jy  sigma=0.176936
! Fit after  self-cal, rms=0.543971Jy  sigma=0.176879
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.543971Jy  sigma=0.176879
! Fit after  self-cal, rms=0.541316Jy  sigma=0.176858
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.035 mas, bmaj=10.67 mas, bpa=7.8 degrees
! Estimated noise=3.77563 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000414067 Jy
! Component: 100  -  total flux cleaned = 0.000414344 Jy
! Component: 150  -  total flux cleaned = 0.00037569 Jy
! Component: 200  -  total flux cleaned = 0.000407694 Jy
! Total flux subtracted in 200 components = 0.000407694 Jy
! Clean residual min=-0.003250 max=0.004349 Jy/beam
! Clean residual mean=-0.000010 rms=0.000958 Jy/beam
! Combined flux in latest and established models = 0.360659 Jy
selfcal
! Performing phase self-cal
! Adding 42 model components to the UV plane model.
! The established model now contains 101 components and 0.360659 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.541300Jy  sigma=0.176780
! Fit after  self-cal, rms=0.541301Jy  sigma=0.176773
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (11.5, -13).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00423783 Jy
! Component: 100  -  total flux cleaned = 0.00656358 Jy
! Component: 150  -  total flux cleaned = 0.00811313 Jy
! Component: 200  -  total flux cleaned = 0.00890188 Jy
! Total flux subtracted in 200 components = 0.00890188 Jy
! Clean residual min=-0.002671 max=0.002920 Jy/beam
! Clean residual mean=-0.000007 rms=0.000775 Jy/beam
! Combined flux in latest and established models = 0.369561 Jy
! Performing phase self-cal
! Adding 40 model components to the UV plane model.
! The established model now contains 141 components and 0.369561 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.541300Jy  sigma=0.176302
! Fit after  self-cal, rms=0.541289Jy  sigma=0.176266
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.541289Jy  sigma=0.176266
! Fit after  self-cal, rms=0.536882Jy  sigma=0.176229
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.037 mas, bmaj=10.68 mas, bpa=7.768 degrees
! Estimated noise=3.76811 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00152546 Jy
! Component: 100  -  total flux cleaned = 0.00206994 Jy
! Component: 150  -  total flux cleaned = 0.00231169 Jy
! Component: 200  -  total flux cleaned = 0.00240295 Jy
! Total flux subtracted in 200 components = 0.00240295 Jy
! Clean residual min=-0.002555 max=0.002883 Jy/beam
! Clean residual mean=-0.000007 rms=0.000729 Jy/beam
! Combined flux in latest and established models = 0.371964 Jy
selfcal
! Performing phase self-cal
! Adding 38 model components to the UV plane model.
! The established model now contains 169 components and 0.371964 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.536876Jy  sigma=0.176155
! Fit after  self-cal, rms=0.536874Jy  sigma=0.176149
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00051465 Jy
! Component: 100  -  total flux cleaned = 0.000567643 Jy
! Component: 150  -  total flux cleaned = 0.000614111 Jy
! Component: 200  -  total flux cleaned = 0.000614138 Jy
! Total flux subtracted in 200 components = 0.000614138 Jy
! Clean residual min=-0.002537 max=0.002893 Jy/beam
! Clean residual mean=-0.000007 rms=0.000719 Jy/beam
! Combined flux in latest and established models = 0.372578 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 186 components and 0.372578 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.536868Jy  sigma=0.176122
! Fit after  self-cal, rms=0.536867Jy  sigma=0.176121
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.536867Jy  sigma=0.176121
! Fit after  self-cal, rms=0.537048Jy  sigma=0.176115
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.158 mas, bmaj=11.99 mas, bpa=5.776 degrees
! Estimated noise=4.66475 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00166826 Jy
! Component: 100  -  total flux cleaned = 0.00183404 Jy
! Component: 150  -  total flux cleaned = 0.00188575 Jy
! Component: 200  -  total flux cleaned = 0.00193196 Jy
! Total flux subtracted in 200 components = 0.00193196 Jy
! Clean residual min=-0.003011 max=0.004067 Jy/beam
! Clean residual mean=-0.000014 rms=0.001030 Jy/beam
! Combined flux in latest and established models = 0.37451 Jy
selfcal
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 200 components and 0.37451 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.537063Jy  sigma=0.176122
! Fit after  self-cal, rms=0.537064Jy  sigma=0.176120
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000120094 Jy
! Component: 100  -  total flux cleaned = 0.000162301 Jy
! Component: 150  -  total flux cleaned = 0.000199741 Jy
! Component: 200  -  total flux cleaned = 0.000217287 Jy
! Total flux subtracted in 200 components = 0.000217287 Jy
! Clean residual min=-0.002920 max=0.004038 Jy/beam
! Clean residual mean=-0.000014 rms=0.001012 Jy/beam
! Combined flux in latest and established models = 0.374728 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 205 components and 0.374728 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.537066Jy  sigma=0.176123
! Fit after  self-cal, rms=0.537066Jy  sigma=0.176123
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.039 mas, bmaj=10.67 mas, bpa=7.75 degrees
! Estimated noise=3.76758 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.039 x 10.67 at 7.75 degrees (North through East)
! Clean map  min=-0.0023856  max=0.29249 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.26 mas, bmaj=10.24 mas, bpa=9.252 degrees
! Estimated noise=8.69592 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.221923 Jy
! Component: 100  -  total flux cleaned = 0.274611 Jy
! Component: 150  -  total flux cleaned = 0.300181 Jy
! Component: 200  -  total flux cleaned = 0.31461 Jy
! Total flux subtracted in 200 components = 0.31461 Jy
! Clean residual min=-0.007708 max=0.009028 Jy/beam
! Clean residual mean=-0.000008 rms=0.001943 Jy/beam
! Combined flux in latest and established models = 0.31461 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.31461 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.039 mas, bmaj=10.67 mas, bpa=7.75 degrees
! Estimated noise=3.76758 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0170509 Jy
! Component: 100  -  total flux cleaned = 0.0269776 Jy
! Component: 150  -  total flux cleaned = 0.0340532 Jy
! Component: 200  -  total flux cleaned = 0.0392652 Jy
! Total flux subtracted in 200 components = 0.0392652 Jy
! Clean residual min=-0.003561 max=0.003830 Jy/beam
! Clean residual mean=-0.000013 rms=0.001055 Jy/beam
! Combined flux in latest and established models = 0.353875 Jy
! Adding 51 model components to the UV plane model.
! The established model now contains 58 components and 0.353875 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.158 mas, bmaj=11.99 mas, bpa=5.776 degrees
! Estimated noise=4.66475 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00725927 Jy
! Component: 100  -  total flux cleaned = 0.0118292 Jy
! Component: 150  -  total flux cleaned = 0.014918 Jy
! Component: 200  -  total flux cleaned = 0.0171036 Jy
! Total flux subtracted in 200 components = 0.0171036 Jy
! Clean residual min=-0.003547 max=0.004153 Jy/beam
! Clean residual mean=-0.000017 rms=0.001125 Jy/beam
! Combined flux in latest and established models = 0.370979 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000991334 Jy
! Component: 100  -  total flux cleaned = 0.00167546 Jy
! Component: 150  -  total flux cleaned = 0.00219981 Jy
! Component: 200  -  total flux cleaned = 0.00257296 Jy
! Total flux subtracted in 200 components = 0.00257296 Jy
! Clean residual min=-0.003014 max=0.003920 Jy/beam
! Clean residual mean=-0.000015 rms=0.001049 Jy/beam
! Combined flux in latest and established models = 0.373552 Jy
! Adding 91 model components to the UV plane model.
! The established model now contains 134 components and 0.373552 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.039 mas, bmaj=10.67 mas, bpa=7.75 degrees
! Estimated noise=3.76758 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00023669 Jy
! Component: 100  -  total flux cleaned = 0.000278862 Jy
! Component: 150  -  total flux cleaned = 0.000276459 Jy
! Component: 200  -  total flux cleaned = 0.000309649 Jy
! Total flux subtracted in 200 components = 0.000309649 Jy
! Clean residual min=-0.002654 max=0.002865 Jy/beam
! Clean residual mean=-0.000007 rms=0.000711 Jy/beam
! Combined flux in latest and established models = 0.373861 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 154 components and 0.373861 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.537007Jy  sigma=0.176154
! Fit after  self-cal, rms=0.537002Jy  sigma=0.176145
wmodel /g0/scr/pima/npcsb_uvs/J1233+8054_S_map.mod
! Writing 154 model components to file: /g0/scr/pima/npcsb_uvs/J1233+8054_S_map.mod
wobs /g0/scr/pima/npcsb_uvs/J1233+8054_S_uvs.fits
! Writing UV FITS file: /g0/scr/pima/npcsb_uvs/J1233+8054_S_uvs.fits
wwins /g0/scr/pima/npcsb_uvs/J1233+8054_S_map.win
! wwins: Wrote 3 windows to /g0/scr/pima/npcsb_uvs/J1233+8054_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000943176 Jy
! Component: 100  -  total flux cleaned = 0.00164948 Jy
! Component: 150  -  total flux cleaned = 0.00208858 Jy
! Component: 200  -  total flux cleaned = 0.00225437 Jy
! Component: 250  -  total flux cleaned = 0.00253439 Jy
! Component: 300  -  total flux cleaned = 0.00284167 Jy
! Component: 350  -  total flux cleaned = 0.00306473 Jy
! Component: 400  -  total flux cleaned = 0.00324569 Jy
! Component: 450  -  total flux cleaned = 0.00324603 Jy
! Component: 500  -  total flux cleaned = 0.00324647 Jy
! Component: 550  -  total flux cleaned = 0.00324654 Jy
! Component: 600  -  total flux cleaned = 0.00331066 Jy
! Component: 650  -  total flux cleaned = 0.00337301 Jy
! Component: 700  -  total flux cleaned = 0.00349556 Jy
! Component: 750  -  total flux cleaned = 0.00352501 Jy
! Component: 800  -  total flux cleaned = 0.00358382 Jy
! Component: 850  -  total flux cleaned = 0.00367064 Jy
! Component: 900  -  total flux cleaned = 0.00372698 Jy
! Component: 950  -  total flux cleaned = 0.00369914 Jy
! Component: 1000  -  total flux cleaned = 0.00367209 Jy
! Component: 1050  -  total flux cleaned = 0.00367279 Jy
! Component: 1100  -  total flux cleaned = 0.00375339 Jy
! Component: 1150  -  total flux cleaned = 0.00377922 Jy
! Component: 1200  -  total flux cleaned = 0.00385704 Jy
! Component: 1250  -  total flux cleaned = 0.00390868 Jy
! Component: 1300  -  total flux cleaned = 0.00401038 Jy
! Component: 1350  -  total flux cleaned = 0.00416035 Jy
! Component: 1400  -  total flux cleaned = 0.00433259 Jy
! Component: 1450  -  total flux cleaned = 0.00438044 Jy
! Component: 1500  -  total flux cleaned = 0.00440441 Jy
! Component: 1550  -  total flux cleaned = 0.00447551 Jy
! Component: 1600  -  total flux cleaned = 0.00452249 Jy
! Component: 1650  -  total flux cleaned = 0.00452259 Jy
! Component: 1700  -  total flux cleaned = 0.00463838 Jy
! Component: 1750  -  total flux cleaned = 0.00463874 Jy
! Component: 1800  -  total flux cleaned = 0.00472962 Jy
! Component: 1850  -  total flux cleaned = 0.00477417 Jy
! Component: 1900  -  total flux cleaned = 0.00479637 Jy
! Component: 1950  -  total flux cleaned = 0.00479668 Jy
! Component: 2000  -  total flux cleaned = 0.00479705 Jy
! Component: 2050  -  total flux cleaned = 0.00481882 Jy
! Component: 2100  -  total flux cleaned = 0.00484045 Jy
! Component: 2150  -  total flux cleaned = 0.00488303 Jy
! Component: 2200  -  total flux cleaned = 0.00490415 Jy
! Component: 2250  -  total flux cleaned = 0.00494594 Jy
! Component: 2300  -  total flux cleaned = 0.00494577 Jy
! Component: 2350  -  total flux cleaned = 0.00494566 Jy
! Component: 2400  -  total flux cleaned = 0.0049661 Jy
! Component: 2450  -  total flux cleaned = 0.00494566 Jy
! Component: 2500  -  total flux cleaned = 0.00492567 Jy
! Component: 2550  -  total flux cleaned = 0.00496578 Jy
! Component: 2600  -  total flux cleaned = 0.00502519 Jy
! Component: 2650  -  total flux cleaned = 0.00498565 Jy
! Component: 2700  -  total flux cleaned = 0.00504432 Jy
! Component: 2750  -  total flux cleaned = 0.00506352 Jy
! Component: 2800  -  total flux cleaned = 0.00510194 Jy
! Component: 2850  -  total flux cleaned = 0.00502559 Jy
! Component: 2900  -  total flux cleaned = 0.00510147 Jy
! Component: 2950  -  total flux cleaned = 0.00508271 Jy
! Component: 3000  -  total flux cleaned = 0.00506428 Jy
! Component: 3050  -  total flux cleaned = 0.00508287 Jy
! Component: 3100  -  total flux cleaned = 0.00510147 Jy
! Component: 3150  -  total flux cleaned = 0.00517473 Jy
! Component: 3200  -  total flux cleaned = 0.00510195 Jy
! Component: 3250  -  total flux cleaned = 0.00519248 Jy
! Component: 3300  -  total flux cleaned = 0.0051924 Jy
! Component: 3350  -  total flux cleaned = 0.00515653 Jy
! Component: 3400  -  total flux cleaned = 0.00520996 Jy
! Component: 3450  -  total flux cleaned = 0.00521 Jy
! Component: 3500  -  total flux cleaned = 0.00519258 Jy
! Component: 3550  -  total flux cleaned = 0.00517526 Jy
! Component: 3600  -  total flux cleaned = 0.00522745 Jy
! Component: 3650  -  total flux cleaned = 0.00521018 Jy
! Component: 3700  -  total flux cleaned = 0.00522739 Jy
! Component: 3750  -  total flux cleaned = 0.00521025 Jy
! Component: 3800  -  total flux cleaned = 0.00522714 Jy
! Component: 3850  -  total flux cleaned = 0.00519337 Jy
! Component: 3900  -  total flux cleaned = 0.00527752 Jy
! Component: 3950  -  total flux cleaned = 0.00526085 Jy
! Component: 4000  -  total flux cleaned = 0.0053274 Jy
! Component: 4050  -  total flux cleaned = 0.00521137 Jy
! Total flux subtracted in 4096 components = 0.00531027 Jy
! Clean residual min=-0.001176 max=0.000987 Jy/beam
! Clean residual mean=-0.000003 rms=0.000310 Jy/beam
! Combined flux in latest and established models = 0.379171 Jy
keep
! Adding 272 model components to the UV plane model.
! The established model now contains 426 components and 0.379171 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/g0/scr/pima/npcsb_uvs/J1233+8054_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.039 x 10.67 at 7.75 degrees (North through East)
! Clean map  min=-0.0018993  max=0.29294 Jy/beam
! Writing clean map to FITS file: /g0/scr/pima/npcsb_uvs/J1233+8054_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.292942 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00030838 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.31581 0.31581 0.63162 1.26324 2.52648 5.05296 10.1059 20.2118 40.4237 80.8473
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0009 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.292 
quit
! Quitting program
! Log file /g0/scr/pima/npcsb_uvs/J1233+8054_S_uvs.log closed on Wed Sep 25 00:11:24 2013