! Started logfile: /g0/scr/pima/npcsb_uvs/J1223+8436_X_uvs.log on Wed Sep 25 00:05:38 2013
obs /g0/scr/pima/npcsb_uvs/J1223+8436_X_uva.fits
! Reading UV FITS file: /g0/scr/pima/npcsb_uvs/J1223+8436_X_uva.fits
! AN table 1: 46 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.955556 visibilities/baseline/integration-bin.
! Found source: J1223+8436
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.40993e+09        8e+06          1        8e+06
!  02        2  8.47993e+09        8e+06          1        8e+06
!  03        3  8.79493e+09        8e+06          1        8e+06
!  04        4  8.89993e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 7912 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.2 
print "taper_size =",taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsb_uvs/J1223+8436_X]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=1.014643Jy  sigma=2.259070
! Fit after  self-cal, rms=0.931228Jy  sigma=2.070620
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6644 mas, bmaj=2.674 mas, bpa=8.083 degrees
! Estimated noise=7.26686 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0559462 Jy
! Component: 100  -  total flux cleaned = 0.070071 Jy
! Total flux subtracted in 100 components = 0.070071 Jy
! Clean residual min=-0.006622 max=0.007639 Jy/beam
! Clean residual mean=-0.000005 rms=0.001634 Jy/beam
! Combined flux in latest and established models = 0.070071 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 0.070071 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.085536Jy  sigma=0.180281
! Fit after  self-cal, rms=0.083755Jy  sigma=0.176014
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8766 mas, bmaj=2.869 mas, bpa=6.632 degrees
! Estimated noise=3.63527 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0083857 Jy
! Component: 100  -  total flux cleaned = 0.0123185 Jy
! Component: 150  -  total flux cleaned = 0.0144423 Jy
! Component: 200  -  total flux cleaned = 0.0155666 Jy
! Total flux subtracted in 200 components = 0.0155666 Jy
! Clean residual min=-0.003553 max=0.005136 Jy/beam
! Clean residual mean=-0.000004 rms=0.000947 Jy/beam
! Combined flux in latest and established models = 0.0856377 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 30 components and 0.0856377 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.082992Jy  sigma=0.174231
! Fit after  self-cal, rms=0.082981Jy  sigma=0.174163
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.94     HN        1.06     KP        0.99     
!   LA        0.97     MK        0.99     NL        1.06     OV        1.04     
!   PT        1.03     SC        1.06     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        1.03     KP        0.95     
!   LA        1.02     MK        0.92     NL        1.04     OV        1.04     
!   PT        1.08     SC        0.95     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.06     HN        0.95     KP        0.87     
!   LA        0.95     MK        1.04     NL        0.96     OV        0.97     
!   PT        1.01     SC        0.95     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        1.06     HN        0.98     KP        0.85     
!   LA        0.87     MK        1.12     NL        1.03     OV        1.03     
!   PT        1.06     SC        0.90     
! 
! 
! Fit before self-cal, rms=0.082981Jy  sigma=0.174163
! Fit after  self-cal, rms=0.081561Jy  sigma=0.173549
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8768 mas, bmaj=2.871 mas, bpa=6.496 degrees
! Estimated noise=3.58998 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-0.4, 4.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00357187 Jy
! Component: 100  -  total flux cleaned = 0.00418418 Jy
! Component: 150  -  total flux cleaned = 0.00430843 Jy
! Component: 200  -  total flux cleaned = 0.00420519 Jy
! Total flux subtracted in 200 components = 0.00420519 Jy
! Clean residual min=-0.003067 max=0.003087 Jy/beam
! Clean residual mean=-0.000001 rms=0.000724 Jy/beam
! Combined flux in latest and established models = 0.0898429 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 54 components and 0.0898429 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.081351Jy  sigma=0.173087
! Fit after  self-cal, rms=0.081329Jy  sigma=0.172972
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.081329Jy  sigma=0.172972
! Fit after  self-cal, rms=0.080284Jy  sigma=0.172946
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8728 mas, bmaj=2.87 mas, bpa=6.536 degrees
! Estimated noise=3.55198 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00133002 Jy
! Component: 100  -  total flux cleaned = 0.00127872 Jy
! Component: 150  -  total flux cleaned = 0.00136267 Jy
! Component: 200  -  total flux cleaned = 0.00143979 Jy
! Total flux subtracted in 200 components = 0.00143979 Jy
! Clean residual min=-0.003075 max=0.002963 Jy/beam
! Clean residual mean=-0.000001 rms=0.000701 Jy/beam
! Combined flux in latest and established models = 0.0912827 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 63 components and 0.0912827 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.080223Jy  sigma=0.172812
! Fit after  self-cal, rms=0.080214Jy  sigma=0.172800
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000237244 Jy
! Component: 100  -  total flux cleaned = 0.000309059 Jy
! Component: 150  -  total flux cleaned = 0.00034208 Jy
! Component: 200  -  total flux cleaned = 0.000404899 Jy
! Total flux subtracted in 200 components = 0.000404899 Jy
! Clean residual min=-0.003108 max=0.002919 Jy/beam
! Clean residual mean=-0.000001 rms=0.000697 Jy/beam
! Combined flux in latest and established models = 0.0916876 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 66 components and 0.0916876 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.080185Jy  sigma=0.172740
! Fit after  self-cal, rms=0.080181Jy  sigma=0.172737
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.080181Jy  sigma=0.172737
! Fit after  self-cal, rms=0.080095Jy  sigma=0.172713
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8719 mas, bmaj=2.871 mas, bpa=6.523 degrees
! Estimated noise=3.54747 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000356883 Jy
! Component: 100  -  total flux cleaned = 0.00048963 Jy
! Component: 150  -  total flux cleaned = 0.000578832 Jy
! Component: 200  -  total flux cleaned = 0.00060677 Jy
! Total flux subtracted in 200 components = 0.00060677 Jy
! Clean residual min=-0.003028 max=0.002849 Jy/beam
! Clean residual mean=-0.000001 rms=0.000687 Jy/beam
! Combined flux in latest and established models = 0.0922943 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 70 components and 0.0922943 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.080072Jy  sigma=0.172665
! Fit after  self-cal, rms=0.080072Jy  sigma=0.172662
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.73801e-05 Jy
! Component: 100  -  total flux cleaned = 8.03424e-05 Jy
! Component: 150  -  total flux cleaned = 0.000129881 Jy
! Component: 200  -  total flux cleaned = 0.000201184 Jy
! Total flux subtracted in 200 components = 0.000201184 Jy
! Clean residual min=-0.003036 max=0.002828 Jy/beam
! Clean residual mean=-0.000001 rms=0.000684 Jy/beam
! Combined flux in latest and established models = 0.0924955 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 73 components and 0.0924955 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.080056Jy  sigma=0.172632
! Fit after  self-cal, rms=0.080054Jy  sigma=0.172630
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.080054Jy  sigma=0.172630
! Fit after  self-cal, rms=0.079912Jy  sigma=0.172613
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.059 mas, bmaj=3.49 mas, bpa=3.934 degrees
! Estimated noise=4.42833 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000423992 Jy
! Component: 100  -  total flux cleaned = 0.000595533 Jy
! Component: 150  -  total flux cleaned = 0.00065874 Jy
! Component: 200  -  total flux cleaned = 0.000698473 Jy
! Total flux subtracted in 200 components = 0.000698473 Jy
! Clean residual min=-0.002847 max=0.002950 Jy/beam
! Clean residual mean=0.000000 rms=0.000747 Jy/beam
! Combined flux in latest and established models = 0.093194 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 86 components and 0.093194 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.079911Jy  sigma=0.172601
! Fit after  self-cal, rms=0.079908Jy  sigma=0.172597
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.13172e-05 Jy
! Component: 100  -  total flux cleaned = 6.99693e-05 Jy
! Component: 150  -  total flux cleaned = 8.76986e-05 Jy
! Component: 200  -  total flux cleaned = 0.000105011 Jy
! Total flux subtracted in 200 components = 0.000105011 Jy
! Clean residual min=-0.002832 max=0.002899 Jy/beam
! Clean residual mean=0.000000 rms=0.000741 Jy/beam
! Combined flux in latest and established models = 0.093299 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 87 components and 0.093299 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.079907Jy  sigma=0.172589
! Fit after  self-cal, rms=0.079905Jy  sigma=0.172588
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8712 mas, bmaj=2.871 mas, bpa=6.505 degrees
! Estimated noise=3.54246 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8712 x 2.871 at 6.505 degrees (North through East)
! Clean map  min=-0.0027158  max=0.073403 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6628 mas, bmaj=2.682 mas, bpa=7.963 degrees
! Estimated noise=7.04482 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0555252 Jy
! Component: 100  -  total flux cleaned = 0.0701736 Jy
! Component: 150  -  total flux cleaned = 0.0761531 Jy
! Component: 200  -  total flux cleaned = 0.0794445 Jy
! Total flux subtracted in 200 components = 0.0794445 Jy
! Clean residual min=-0.006977 max=0.006115 Jy/beam
! Clean residual mean=-0.000004 rms=0.001454 Jy/beam
! Combined flux in latest and established models = 0.0794445 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 24 model components to the UV plane model.
! The established model now contains 24 components and 0.0794445 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8712 mas, bmaj=2.871 mas, bpa=6.505 degrees
! Estimated noise=3.54246 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (1, 4.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00455995 Jy
! Component: 100  -  total flux cleaned = 0.007107 Jy
! Component: 150  -  total flux cleaned = 0.0083348 Jy
! Component: 200  -  total flux cleaned = 0.0091967 Jy
! Total flux subtracted in 200 components = 0.0091967 Jy
! Clean residual min=-0.003142 max=0.002851 Jy/beam
! Clean residual mean=-0.000003 rms=0.000736 Jy/beam
! Combined flux in latest and established models = 0.0886412 Jy
! Adding 29 model components to the UV plane model.
! The established model now contains 51 components and 0.0886412 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.059 mas, bmaj=3.49 mas, bpa=3.934 degrees
! Estimated noise=4.42833 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00217666 Jy
! Component: 100  -  total flux cleaned = 0.00289493 Jy
! Component: 150  -  total flux cleaned = 0.00313795 Jy
! Component: 200  -  total flux cleaned = 0.00334583 Jy
! Total flux subtracted in 200 components = 0.00334583 Jy
! Clean residual min=-0.002982 max=0.002834 Jy/beam
! Clean residual mean=-0.000001 rms=0.000748 Jy/beam
! Combined flux in latest and established models = 0.091987 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.38687e-05 Jy
! Component: 100  -  total flux cleaned = 0.000140774 Jy
! Component: 150  -  total flux cleaned = 0.000140369 Jy
! Component: 200  -  total flux cleaned = 0.000140638 Jy
! Total flux subtracted in 200 components = 0.000140638 Jy
! Clean residual min=-0.002901 max=0.002752 Jy/beam
! Clean residual mean=-0.000001 rms=0.000738 Jy/beam
! Combined flux in latest and established models = 0.0921276 Jy
! Adding 30 model components to the UV plane model.
! The established model now contains 81 components and 0.0921276 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8712 mas, bmaj=2.871 mas, bpa=6.505 degrees
! Estimated noise=3.54246 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00110306 Jy
! Component: 100  -  total flux cleaned = -0.00122792 Jy
! Component: 150  -  total flux cleaned = -0.00123113 Jy
! Component: 200  -  total flux cleaned = -0.00118547 Jy
! Total flux subtracted in 200 components = -0.00118547 Jy
! Clean residual min=-0.002802 max=0.002825 Jy/beam
! Clean residual mean=-0.000002 rms=0.000672 Jy/beam
! Combined flux in latest and established models = 0.0909422 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 103 components and 0.0909422 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.079915Jy  sigma=0.172613
! Fit after  self-cal, rms=0.079919Jy  sigma=0.172592
wmodel /g0/scr/pima/npcsb_uvs/J1223+8436_X_map.mod
! Writing 103 model components to file: /g0/scr/pima/npcsb_uvs/J1223+8436_X_map.mod
wobs /g0/scr/pima/npcsb_uvs/J1223+8436_X_uvs.fits
! Writing UV FITS file: /g0/scr/pima/npcsb_uvs/J1223+8436_X_uvs.fits
wwins /g0/scr/pima/npcsb_uvs/J1223+8436_X_map.win
! wwins: Wrote 3 windows to /g0/scr/pima/npcsb_uvs/J1223+8436_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000418982 Jy
! Component: 100  -  total flux cleaned = -0.000513547 Jy
! Component: 150  -  total flux cleaned = -0.000605499 Jy
! Component: 200  -  total flux cleaned = -0.000911655 Jy
! Component: 250  -  total flux cleaned = -0.00107997 Jy
! Component: 300  -  total flux cleaned = -0.00124421 Jy
! Component: 350  -  total flux cleaned = -0.00136493 Jy
! Component: 400  -  total flux cleaned = -0.00155981 Jy
! Component: 450  -  total flux cleaned = -0.0017111 Jy
! Component: 500  -  total flux cleaned = -0.00174775 Jy
! Component: 550  -  total flux cleaned = -0.0017483 Jy
! Component: 600  -  total flux cleaned = -0.00181954 Jy
! Component: 650  -  total flux cleaned = -0.00171575 Jy
! Component: 700  -  total flux cleaned = -0.00161429 Jy
! Component: 750  -  total flux cleaned = -0.00164775 Jy
! Component: 800  -  total flux cleaned = -0.00168004 Jy
! Component: 850  -  total flux cleaned = -0.00158276 Jy
! Component: 900  -  total flux cleaned = -0.00164516 Jy
! Component: 950  -  total flux cleaned = -0.00155141 Jy
! Component: 1000  -  total flux cleaned = -0.00142845 Jy
! Component: 1050  -  total flux cleaned = -0.00142843 Jy
! Component: 1100  -  total flux cleaned = -0.00139814 Jy
! Component: 1150  -  total flux cleaned = -0.00125049 Jy
! Component: 1200  -  total flux cleaned = -0.00125075 Jy
! Component: 1250  -  total flux cleaned = -0.00122195 Jy
! Component: 1300  -  total flux cleaned = -0.00122219 Jy
! Component: 1350  -  total flux cleaned = -0.00113788 Jy
! Component: 1400  -  total flux cleaned = -0.00108238 Jy
! Component: 1450  -  total flux cleaned = -0.000999375 Jy
! Component: 1500  -  total flux cleaned = -0.000972221 Jy
! Component: 1550  -  total flux cleaned = -0.000918114 Jy
! Component: 1600  -  total flux cleaned = -0.000837222 Jy
! Component: 1650  -  total flux cleaned = -0.000784284 Jy
! Component: 1700  -  total flux cleaned = -0.000626277 Jy
! Component: 1750  -  total flux cleaned = -0.000522122 Jy
! Component: 1800  -  total flux cleaned = -0.000444639 Jy
! Component: 1850  -  total flux cleaned = -0.000342386 Jy
! Component: 1900  -  total flux cleaned = -0.000241115 Jy
! Component: 1950  -  total flux cleaned = -0.000215711 Jy
! Component: 2000  -  total flux cleaned = -9.11115e-05 Jy
! Component: 2050  -  total flux cleaned = 8.0232e-06 Jy
! Component: 2100  -  total flux cleaned = 5.68066e-05 Jy
! Component: 2150  -  total flux cleaned = 0.000105829 Jy
! Component: 2200  -  total flux cleaned = 0.000129974 Jy
! Component: 2250  -  total flux cleaned = 0.000105838 Jy
! Component: 2300  -  total flux cleaned = 0.00010627 Jy
! Component: 2350  -  total flux cleaned = 0.000200434 Jy
! Component: 2400  -  total flux cleaned = 0.000177045 Jy
! Component: 2450  -  total flux cleaned = 0.000269585 Jy
! Component: 2500  -  total flux cleaned = 0.000315442 Jy
! Component: 2550  -  total flux cleaned = 0.000223665 Jy
! Component: 2600  -  total flux cleaned = 0.00042824 Jy
! Component: 2650  -  total flux cleaned = 0.000405619 Jy
! Component: 2700  -  total flux cleaned = 0.000472809 Jy
! Component: 2750  -  total flux cleaned = 0.000517295 Jy
! Component: 2800  -  total flux cleaned = 0.000583709 Jy
! Component: 2850  -  total flux cleaned = 0.000627675 Jy
! Component: 2900  -  total flux cleaned = 0.000758793 Jy
! Component: 2950  -  total flux cleaned = 0.000867153 Jy
! Component: 3000  -  total flux cleaned = 0.000974874 Jy
! Component: 3050  -  total flux cleaned = 0.00106044 Jy
! Component: 3100  -  total flux cleaned = 0.00110293 Jy
! Component: 3150  -  total flux cleaned = 0.00118761 Jy
! Component: 3200  -  total flux cleaned = 0.0012085 Jy
! Component: 3250  -  total flux cleaned = 0.00133372 Jy
! Component: 3300  -  total flux cleaned = 0.00139575 Jy
! Component: 3350  -  total flux cleaned = 0.00141643 Jy
! Component: 3400  -  total flux cleaned = 0.0014985 Jy
! Component: 3450  -  total flux cleaned = 0.00147824 Jy
! Component: 3500  -  total flux cleaned = 0.00157969 Jy
! Component: 3550  -  total flux cleaned = 0.00170055 Jy
! Component: 3600  -  total flux cleaned = 0.00178091 Jy
! Component: 3650  -  total flux cleaned = 0.00188081 Jy
! Component: 3700  -  total flux cleaned = 0.00188077 Jy
! Component: 3750  -  total flux cleaned = 0.00203881 Jy
! Component: 3800  -  total flux cleaned = 0.00211737 Jy
! Component: 3850  -  total flux cleaned = 0.00211734 Jy
! Component: 3900  -  total flux cleaned = 0.00225335 Jy
! Component: 3950  -  total flux cleaned = 0.00233083 Jy
! Component: 4000  -  total flux cleaned = 0.00233108 Jy
! Component: 4050  -  total flux cleaned = 0.00246532 Jy
! Total flux subtracted in 4096 components = 0.00252248 Jy
! Clean residual min=-0.001057 max=0.000999 Jy/beam
! Clean residual mean=0.000001 rms=0.000341 Jy/beam
! Combined flux in latest and established models = 0.0934647 Jy
keep
! Adding 315 model components to the UV plane model.
! The established model now contains 418 components and 0.0934647 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/g0/scr/pima/npcsb_uvs/J1223+8436_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8712 x 2.871 at 6.505 degrees (North through East)
! Clean map  min=-0.0025268  max=0.073438 Jy/beam
! Writing clean map to FITS file: /g0/scr/pima/npcsb_uvs/J1223+8436_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0734377 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000338974 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.38474 1.38474 2.76948 5.53897 11.0779 22.1559 44.3118 88.6235
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.001 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.073 
quit
! Quitting program
! Log file /g0/scr/pima/npcsb_uvs/J1223+8436_X_uvs.log closed on Wed Sep 25 00:05:43 2013