! Started logfile: /g0/scr/pima/npcsb_uvs/J1159+2914_S_uvs.log on Wed Sep 25 00:11:04 2013
obs /g0/scr/pima/npcsb_uvs/J1159+2914_S_uva.fits
! Reading UV FITS file: /g0/scr/pima/npcsb_uvs/J1159+2914_S_uva.fits
! AN table 1: 13 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.635897 visibilities/baseline/integration-bin.
! Found source: J1159+2914
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23693e+09        8e+06          1        8e+06
!  02        2  2.26693e+09        8e+06          1        8e+06
!  03        3  2.35693e+09        8e+06          1        8e+06
!  04        4  2.37693e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 1488 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsb_uvs/J1159+2914_S]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.107972Jy  sigma=2.273985
! Fit after  self-cal, rms=0.546077Jy  sigma=1.193581
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.63 mas, bmaj=8.084 mas, bpa=-24.16 degrees
! Estimated noise=11.0204 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.369805 Jy
! Component: 100  -  total flux cleaned = 0.496429 Jy
! Total flux subtracted in 100 components = 0.496429 Jy
! Clean residual min=-0.030427 max=0.064609 Jy/beam
! Clean residual mean=0.000036 rms=0.011446 Jy/beam
! Combined flux in latest and established models = 0.496429 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 14 components and 0.496429 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.201647Jy  sigma=0.402673
! Fit after  self-cal, rms=0.201222Jy  sigma=0.401806
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.109 mas, bmaj=8.282 mas, bpa=-25.19 degrees
! Estimated noise=8.66721 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0863489 Jy
! Component: 100  -  total flux cleaned = 0.137979 Jy
! Component: 150  -  total flux cleaned = 0.173209 Jy
! Component: 200  -  total flux cleaned = 0.198283 Jy
! Total flux subtracted in 200 components = 0.198283 Jy
! Clean residual min=-0.028287 max=0.046666 Jy/beam
! Clean residual mean=0.000009 rms=0.007956 Jy/beam
! Combined flux in latest and established models = 0.694712 Jy
! Performing phase self-cal
! Adding 47 model components to the UV plane model.
! The established model now contains 54 components and 0.694712 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.156288Jy  sigma=0.289298
! Fit after  self-cal, rms=0.155413Jy  sigma=0.286463
! Inverting map 
! Added new window around map position (5, 9).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0407063 Jy
! Component: 100  -  total flux cleaned = 0.0559442 Jy
! Component: 150  -  total flux cleaned = 0.0686027 Jy
! Component: 200  -  total flux cleaned = 0.0783054 Jy
! Total flux subtracted in 200 components = 0.0783054 Jy
! Clean residual min=-0.017819 max=0.022080 Jy/beam
! Clean residual mean=0.000005 rms=0.005460 Jy/beam
! Combined flux in latest and established models = 0.773017 Jy
! Performing phase self-cal
! Adding 43 model components to the UV plane model.
! The established model now contains 97 components and 0.773017 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.142502Jy  sigma=0.254777
! Fit after  self-cal, rms=0.141530Jy  sigma=0.252737
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.09     FD        0.98     HN        1.03     KP        0.96     
!   LA        1.12     MK        0.97     NL        1.05     OV        1.00     
!   PT        1.08     SC        1.07     
! 
! 
! Correcting IF 2.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        1.03     HN        1.05     KP        0.97     
!   LA        1.07     MK        1.00     NL        1.08     OV        1.00     
!   PT        0.99     SC        0.98     
! 
! 
! Correcting IF 3.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.85     FD        1.01     HN        1.03     KP        0.95     
!   LA        0.85     MK        1.03     NL        1.10     OV        1.03     
!   PT        1.04     SC        1.06     
! 
! 
! Correcting IF 4.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.90     FD        0.99     HN        0.99     KP        0.87     
!   LA        0.76     MK        1.02     NL        0.99     OV        0.88     
!   PT        0.95     SC        1.09     
! 
! 
! Fit before self-cal, rms=0.141530Jy  sigma=0.252737
! Fit after  self-cal, rms=0.113877Jy  sigma=0.200790
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.126 mas, bmaj=8.258 mas, bpa=-25.33 degrees
! Estimated noise=8.66738 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (100.5, -25.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0156545 Jy
! Component: 100  -  total flux cleaned = 0.025154 Jy
! Component: 150  -  total flux cleaned = 0.030893 Jy
! Component: 200  -  total flux cleaned = 0.0349145 Jy
! Total flux subtracted in 200 components = 0.0349145 Jy
! Clean residual min=-0.011446 max=0.007989 Jy/beam
! Clean residual mean=0.000000 rms=0.002276 Jy/beam
! Combined flux in latest and established models = 0.807932 Jy
! Performing phase self-cal
! Adding 43 model components to the UV plane model.
! The established model now contains 138 components and 0.807932 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.111157Jy  sigma=0.193922
! Fit after  self-cal, rms=0.110970Jy  sigma=0.193522
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.110970Jy  sigma=0.193522
! Fit after  self-cal, rms=0.110767Jy  sigma=0.193314
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.129 mas, bmaj=8.247 mas, bpa=-25.31 degrees
! Estimated noise=8.6499 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00385643 Jy
! Component: 100  -  total flux cleaned = 0.00686048 Jy
! Component: 150  -  total flux cleaned = 0.00914016 Jy
! Component: 200  -  total flux cleaned = 0.0108596 Jy
! Total flux subtracted in 200 components = 0.0108596 Jy
! Clean residual min=-0.010463 max=0.007710 Jy/beam
! Clean residual mean=0.000003 rms=0.002035 Jy/beam
! Combined flux in latest and established models = 0.818792 Jy
selfcal
! Performing phase self-cal
! Adding 38 model components to the UV plane model.
! The established model now contains 161 components and 0.818792 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.110104Jy  sigma=0.191727
! Fit after  self-cal, rms=0.110046Jy  sigma=0.191621
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00141485 Jy
! Component: 100  -  total flux cleaned = 0.00364661 Jy
! Component: 150  -  total flux cleaned = 0.00428343 Jy
! Component: 200  -  total flux cleaned = 0.00511653 Jy
! Total flux subtracted in 200 components = 0.00511653 Jy
! Clean residual min=-0.009790 max=0.007328 Jy/beam
! Clean residual mean=0.000004 rms=0.001922 Jy/beam
! Combined flux in latest and established models = 0.823908 Jy
! Performing phase self-cal
! Adding 43 model components to the UV plane model.
! The established model now contains 186 components and 0.823908 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.109720Jy  sigma=0.190876
! Fit after  self-cal, rms=0.109685Jy  sigma=0.190826
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.109685Jy  sigma=0.190826
! Fit after  self-cal, rms=0.109739Jy  sigma=0.190709
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.128 mas, bmaj=8.239 mas, bpa=-25.31 degrees
! Estimated noise=8.64009 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00172585 Jy
! Component: 100  -  total flux cleaned = 0.00339134 Jy
! Component: 150  -  total flux cleaned = 0.00435593 Jy
! Component: 200  -  total flux cleaned = 0.00514518 Jy
! Total flux subtracted in 200 components = 0.00514518 Jy
! Clean residual min=-0.009407 max=0.006858 Jy/beam
! Clean residual mean=0.000005 rms=0.001819 Jy/beam
! Combined flux in latest and established models = 0.829053 Jy
selfcal
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 200 components and 0.829053 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.109487Jy  sigma=0.190184
! Fit after  self-cal, rms=0.109457Jy  sigma=0.190143
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000816591 Jy
! Component: 100  -  total flux cleaned = 0.00166378 Jy
! Component: 150  -  total flux cleaned = 0.00235948 Jy
! Component: 200  -  total flux cleaned = 0.00285249 Jy
! Total flux subtracted in 200 components = 0.00285249 Jy
! Clean residual min=-0.009173 max=0.006745 Jy/beam
! Clean residual mean=0.000005 rms=0.001763 Jy/beam
! Combined flux in latest and established models = 0.831906 Jy
! Performing phase self-cal
! Adding 44 model components to the UV plane model.
! The established model now contains 217 components and 0.831906 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.109306Jy  sigma=0.189800
! Fit after  self-cal, rms=0.109286Jy  sigma=0.189775
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.109286Jy  sigma=0.189775
! Fit after  self-cal, rms=0.109377Jy  sigma=0.189728
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.298 mas, bmaj=9.442 mas, bpa=-17.2 degrees
! Estimated noise=10.5431 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0026763 Jy
! Component: 100  -  total flux cleaned = 0.00478877 Jy
! Component: 150  -  total flux cleaned = 0.0063115 Jy
! Component: 200  -  total flux cleaned = 0.00731852 Jy
! Total flux subtracted in 200 components = 0.00731852 Jy
! Clean residual min=-0.009781 max=0.009380 Jy/beam
! Clean residual mean=0.000013 rms=0.002546 Jy/beam
! Combined flux in latest and established models = 0.839224 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 235 components and 0.839224 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.109310Jy  sigma=0.189567
! Fit after  self-cal, rms=0.109260Jy  sigma=0.189489
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000941864 Jy
! Component: 100  -  total flux cleaned = 0.00237051 Jy
! Component: 150  -  total flux cleaned = 0.00323895 Jy
! Component: 200  -  total flux cleaned = 0.00385498 Jy
! Total flux subtracted in 200 components = 0.00385498 Jy
! Clean residual min=-0.009339 max=0.008841 Jy/beam
! Clean residual mean=0.000012 rms=0.002446 Jy/beam
! Combined flux in latest and established models = 0.843079 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 256 components and 0.843079 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.109240Jy  sigma=0.189457
! Fit after  self-cal, rms=0.109215Jy  sigma=0.189414
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.129 mas, bmaj=8.232 mas, bpa=-25.31 degrees
! Estimated noise=8.63713 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.129 x 8.232 at -25.31 degrees (North through East)
! Clean map  min=-0.0089251  max=0.47294 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.657 mas, bmaj=8.081 mas, bpa=-24.24 degrees
! Estimated noise=11.1493 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.369024 Jy
! Component: 100  -  total flux cleaned = 0.496152 Jy
! Component: 150  -  total flux cleaned = 0.569357 Jy
! Component: 200  -  total flux cleaned = 0.617366 Jy
! Total flux subtracted in 200 components = 0.617366 Jy
! Clean residual min=-0.017861 max=0.026836 Jy/beam
! Clean residual mean=0.000014 rms=0.006105 Jy/beam
! Combined flux in latest and established models = 0.617366 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 36 model components to the UV plane model.
! The established model now contains 36 components and 0.617366 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.129 mas, bmaj=8.232 mas, bpa=-25.31 degrees
! Estimated noise=8.63713 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0418544 Jy
! Component: 100  -  total flux cleaned = 0.0731226 Jy
! Component: 150  -  total flux cleaned = 0.0974654 Jy
! Component: 200  -  total flux cleaned = 0.116939 Jy
! Total flux subtracted in 200 components = 0.116939 Jy
! Clean residual min=-0.012554 max=0.013957 Jy/beam
! Clean residual mean=0.000006 rms=0.003564 Jy/beam
! Combined flux in latest and established models = 0.734305 Jy
! Adding 58 model components to the UV plane model.
! The established model now contains 92 components and 0.734305 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.298 mas, bmaj=9.442 mas, bpa=-17.2 degrees
! Estimated noise=10.5431 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0278064 Jy
! Component: 100  -  total flux cleaned = 0.0458534 Jy
! Component: 150  -  total flux cleaned = 0.0593264 Jy
! Component: 200  -  total flux cleaned = 0.0697536 Jy
! Total flux subtracted in 200 components = 0.0697536 Jy
! Clean residual min=-0.012949 max=0.010756 Jy/beam
! Clean residual mean=0.000008 rms=0.003335 Jy/beam
! Combined flux in latest and established models = 0.804059 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00823821 Jy
! Component: 100  -  total flux cleaned = 0.0148736 Jy
! Component: 150  -  total flux cleaned = 0.0203147 Jy
! Component: 200  -  total flux cleaned = 0.0248217 Jy
! Total flux subtracted in 200 components = 0.0248217 Jy
! Clean residual min=-0.010352 max=0.010107 Jy/beam
! Clean residual mean=0.000008 rms=0.002711 Jy/beam
! Combined flux in latest and established models = 0.82888 Jy
! Adding 107 model components to the UV plane model.
! The established model now contains 188 components and 0.828881 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.129 mas, bmaj=8.232 mas, bpa=-25.31 degrees
! Estimated noise=8.63713 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0039121 Jy
! Component: 100  -  total flux cleaned = 0.00605906 Jy
! Component: 150  -  total flux cleaned = 0.00715911 Jy
! Component: 200  -  total flux cleaned = 0.00826192 Jy
! Total flux subtracted in 200 components = 0.00826192 Jy
! Clean residual min=-0.008741 max=0.006779 Jy/beam
! Clean residual mean=0.000004 rms=0.001854 Jy/beam
! Combined flux in latest and established models = 0.837143 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 212 components and 0.837143 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.109560Jy  sigma=0.190369
! Fit after  self-cal, rms=0.109390Jy  sigma=0.190030
wmodel /g0/scr/pima/npcsb_uvs/J1159+2914_S_map.mod
! Writing 212 model components to file: /g0/scr/pima/npcsb_uvs/J1159+2914_S_map.mod
wobs /g0/scr/pima/npcsb_uvs/J1159+2914_S_uvs.fits
! Writing UV FITS file: /g0/scr/pima/npcsb_uvs/J1159+2914_S_uvs.fits
wwins /g0/scr/pima/npcsb_uvs/J1159+2914_S_map.win
! wwins: Wrote 3 windows to /g0/scr/pima/npcsb_uvs/J1159+2914_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00355467 Jy
! Component: 100  -  total flux cleaned = -0.00491692 Jy
! Component: 150  -  total flux cleaned = -0.00593944 Jy
! Component: 200  -  total flux cleaned = -0.00679155 Jy
! Component: 250  -  total flux cleaned = -0.00759196 Jy
! Component: 300  -  total flux cleaned = -0.00806533 Jy
! Component: 350  -  total flux cleaned = -0.00815416 Jy
! Component: 400  -  total flux cleaned = -0.00824057 Jy
! Component: 450  -  total flux cleaned = -0.00857241 Jy
! Component: 500  -  total flux cleaned = -0.00881192 Jy
! Component: 550  -  total flux cleaned = -0.00912066 Jy
! Component: 600  -  total flux cleaned = -0.00926863 Jy
! Component: 650  -  total flux cleaned = -0.00948553 Jy
! Component: 700  -  total flux cleaned = -0.00962289 Jy
! Component: 750  -  total flux cleaned = -0.00955542 Jy
! Component: 800  -  total flux cleaned = -0.00975472 Jy
! Component: 850  -  total flux cleaned = -0.00988471 Jy
! Component: 900  -  total flux cleaned = -0.00982174 Jy
! Component: 950  -  total flux cleaned = -0.0100065 Jy
! Component: 1000  -  total flux cleaned = -0.0101872 Jy
! Component: 1050  -  total flux cleaned = -0.0103042 Jy
! Component: 1100  -  total flux cleaned = -0.0103037 Jy
! Component: 1150  -  total flux cleaned = -0.0107557 Jy
! Component: 1200  -  total flux cleaned = -0.010866 Jy
! Component: 1250  -  total flux cleaned = -0.0113017 Jy
! Component: 1300  -  total flux cleaned = -0.0116229 Jy
! Component: 1350  -  total flux cleaned = -0.0118337 Jy
! Component: 1400  -  total flux cleaned = -0.0122452 Jy
! Component: 1450  -  total flux cleaned = -0.0127001 Jy
! Component: 1500  -  total flux cleaned = -0.0130482 Jy
! Component: 1550  -  total flux cleaned = -0.0134866 Jy
! Component: 1600  -  total flux cleaned = -0.0137258 Jy
! Component: 1650  -  total flux cleaned = -0.0136787 Jy
! Component: 1700  -  total flux cleaned = -0.01419 Jy
! Component: 1750  -  total flux cleaned = -0.0145092 Jy
! Component: 1800  -  total flux cleaned = -0.0145986 Jy
! Component: 1850  -  total flux cleaned = -0.014864 Jy
! Component: 1900  -  total flux cleaned = -0.0149952 Jy
! Component: 1950  -  total flux cleaned = -0.0152552 Jy
! Component: 2000  -  total flux cleaned = -0.0154254 Jy
! Component: 2050  -  total flux cleaned = -0.0154255 Jy
! Component: 2100  -  total flux cleaned = -0.0155504 Jy
! Component: 2150  -  total flux cleaned = -0.0155096 Jy
! Component: 2200  -  total flux cleaned = -0.0154296 Jy
! Component: 2250  -  total flux cleaned = -0.0155105 Jy
! Component: 2300  -  total flux cleaned = -0.015629 Jy
! Component: 2350  -  total flux cleaned = -0.0155896 Jy
! Component: 2400  -  total flux cleaned = -0.0155895 Jy
! Component: 2450  -  total flux cleaned = -0.0155887 Jy
! Component: 2500  -  total flux cleaned = -0.0155128 Jy
! Component: 2550  -  total flux cleaned = -0.0155496 Jy
! Component: 2600  -  total flux cleaned = -0.0154377 Jy
! Component: 2650  -  total flux cleaned = -0.0154372 Jy
! Component: 2700  -  total flux cleaned = -0.015365 Jy
! Component: 2750  -  total flux cleaned = -0.0152575 Jy
! Component: 2800  -  total flux cleaned = -0.0154355 Jy
! Component: 2850  -  total flux cleaned = -0.0153292 Jy
! Component: 2900  -  total flux cleaned = -0.0153291 Jy
! Component: 2950  -  total flux cleaned = -0.015363 Jy
! Component: 3000  -  total flux cleaned = -0.0152605 Jy
! Component: 3050  -  total flux cleaned = -0.0153285 Jy
! Component: 3100  -  total flux cleaned = -0.0152948 Jy
! Component: 3150  -  total flux cleaned = -0.0152946 Jy
! Component: 3200  -  total flux cleaned = -0.0152288 Jy
! Component: 3250  -  total flux cleaned = -0.015294 Jy
! Component: 3300  -  total flux cleaned = -0.0152613 Jy
! Component: 3350  -  total flux cleaned = -0.0151328 Jy
! Component: 3400  -  total flux cleaned = -0.0151646 Jy
! Component: 3450  -  total flux cleaned = -0.015196 Jy
! Component: 3500  -  total flux cleaned = -0.0151336 Jy
! Component: 3550  -  total flux cleaned = -0.0150716 Jy
! Component: 3600  -  total flux cleaned = -0.0151334 Jy
! Component: 3650  -  total flux cleaned = -0.0150421 Jy
! Component: 3700  -  total flux cleaned = -0.0151328 Jy
! Component: 3750  -  total flux cleaned = -0.0150427 Jy
! Component: 3800  -  total flux cleaned = -0.0150131 Jy
! Component: 3850  -  total flux cleaned = -0.0149837 Jy
! Component: 3900  -  total flux cleaned = -0.0149541 Jy
! Component: 3950  -  total flux cleaned = -0.0149833 Jy
! Component: 4000  -  total flux cleaned = -0.0151286 Jy
! Component: 4050  -  total flux cleaned = -0.0150994 Jy
! Total flux subtracted in 4096 components = -0.0151853 Jy
! Clean residual min=-0.001818 max=0.001755 Jy/beam
! Clean residual mean=0.000004 rms=0.000521 Jy/beam
! Combined flux in latest and established models = 0.821957 Jy
keep
! Adding 318 model components to the UV plane model.
! The established model now contains 530 components and 0.821957 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/g0/scr/pima/npcsb_uvs/J1159+2914_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.129 x 8.232 at -25.31 degrees (North through East)
! Clean map  min=-0.0044506  max=0.47479 Jy/beam
! Writing clean map to FITS file: /g0/scr/pima/npcsb_uvs/J1159+2914_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.474791 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000509045 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.321644 0.321644 0.643287 1.28657 2.57315 5.1463 10.2926 20.5852 41.1704 82.3408
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0015 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.474 
quit
! Quitting program
! Log file /g0/scr/pima/npcsb_uvs/J1159+2914_S_uvs.log closed on Wed Sep 25 00:11:08 2013