! Started logfile: /g0/scr/pima/npcsb_uvs/J1155+8157_S_uvs.log on Wed Sep 25 00:11:00 2013
obs /g0/scr/pima/npcsb_uvs/J1155+8157_S_uva.fits
! Reading UV FITS file: /g0/scr/pima/npcsb_uvs/J1155+8157_S_uva.fits
! AN table 1: 47 integrations on 28 of 28 possible baselines.
! Apparent sampling: 0.451368 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: J1155+8157
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23693e+09        8e+06          1        8e+06
!  02        2  2.26693e+09        8e+06          1        8e+06
!  03        3  2.35693e+09        8e+06          1        8e+06
!  04        4  2.37693e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 2376 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsb_uvs/J1155+8157_S]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 144 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 144 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 144 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 144 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.009052Jy  sigma=2.195053
! Fit after  self-cal, rms=0.913503Jy  sigma=1.990581
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=10.43 mas, bmaj=50.95 mas, bpa=28.56 degrees
! Estimated noise=22.3102 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0678419 Jy
! Component: 100  -  total flux cleaned = 0.0750847 Jy
! Total flux subtracted in 100 components = 0.0750847 Jy
! Clean residual min=-0.009603 max=0.009586 Jy/beam
! Clean residual mean=-0.000053 rms=0.003653 Jy/beam
! Combined flux in latest and established models = 0.0750846 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 28 components and 0.0750846 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.092451Jy  sigma=0.170247
! Fit after  self-cal, rms=0.091982Jy  sigma=0.168884
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=12.5 mas, bmaj=44.44 mas, bpa=27.71 degrees
! Estimated noise=7.82081 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00719828 Jy
! Component: 100  -  total flux cleaned = 0.00815976 Jy
! Component: 150  -  total flux cleaned = 0.00818677 Jy
! Component: 200  -  total flux cleaned = 0.00857066 Jy
! Total flux subtracted in 200 components = 0.00857066 Jy
! Clean residual min=-0.003001 max=0.003023 Jy/beam
! Clean residual mean=-0.000018 rms=0.001352 Jy/beam
! Combined flux in latest and established models = 0.0836553 Jy
! Performing phase self-cal
! Adding 99 model components to the UV plane model.
! The established model now contains 127 components and 0.0836554 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.089477Jy  sigma=0.163973
! Fit after  self-cal, rms=0.089070Jy  sigma=0.163454
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        0.93     KP        1.02     LA        1.09     
!   NL        1.00*    OV        0.98     PT        0.95     SC        1.00*    
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.01     KP        1.04     LA        1.01     
!   NL        1.00*    OV        1.02     PT        0.88     SC        1.00*    
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.03     KP        0.99     LA        0.90     
!   NL        1.00*    OV        1.11     PT        1.02     SC        1.00*    
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.13     KP        0.83     LA        0.81     
!   NL        1.00*    OV        0.99     PT        0.95     SC        1.00*    
! 
! 
! Fit before self-cal, rms=0.089070Jy  sigma=0.163454
! Fit after  self-cal, rms=0.079522Jy  sigma=0.162477
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=12.72 mas, bmaj=44.06 mas, bpa=27.45 degrees
! Estimated noise=7.54361 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00233354 Jy
! Component: 100  -  total flux cleaned = 0.00259452 Jy
! Component: 150  -  total flux cleaned = 0.00308744 Jy
! Component: 200  -  total flux cleaned = 0.00314358 Jy
! Total flux subtracted in 200 components = 0.00314358 Jy
! Clean residual min=-0.000833 max=0.000825 Jy/beam
! Clean residual mean=0.000001 rms=0.000332 Jy/beam
! Combined flux in latest and established models = 0.0867989 Jy
! Performing phase self-cal
! Adding 98 model components to the UV plane model.
! The established model now contains 225 components and 0.0867989 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.079335Jy  sigma=0.162074
! Fit after  self-cal, rms=0.079362Jy  sigma=0.161862
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.079362Jy  sigma=0.161862
! Fit after  self-cal, rms=0.079691Jy  sigma=0.161828
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=12.79 mas, bmaj=43.91 mas, bpa=27.36 degrees
! Estimated noise=7.54591 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000497333 Jy
! Component: 100  -  total flux cleaned = 0.000499543 Jy
! Component: 150  -  total flux cleaned = 0.000720067 Jy
! Component: 200  -  total flux cleaned = 0.000926224 Jy
! Total flux subtracted in 200 components = 0.000926224 Jy
! Clean residual min=-0.000676 max=0.000669 Jy/beam
! Clean residual mean=0.000003 rms=0.000278 Jy/beam
! Combined flux in latest and established models = 0.0877251 Jy
selfcal
! Performing phase self-cal
! Adding 85 model components to the UV plane model.
! The established model now contains 307 components and 0.0877251 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.079626Jy  sigma=0.161724
! Fit after  self-cal, rms=0.079663Jy  sigma=0.161706
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000343167 Jy
! Component: 100  -  total flux cleaned = -0.000183493 Jy
! Component: 150  -  total flux cleaned = -7.11778e-05 Jy
! Component: 200  -  total flux cleaned = 7.50811e-05 Jy
! Total flux subtracted in 200 components = 7.50811e-05 Jy
! Clean residual min=-0.000605 max=0.000595 Jy/beam
! Clean residual mean=0.000003 rms=0.000246 Jy/beam
! Combined flux in latest and established models = 0.0878002 Jy
! Performing phase self-cal
! Adding 82 model components to the UV plane model.
! The established model now contains 377 components and 0.0878002 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.079614Jy  sigma=0.161642
! Fit after  self-cal, rms=0.079627Jy  sigma=0.161636
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.079627Jy  sigma=0.161636
! Fit after  self-cal, rms=0.079483Jy  sigma=0.161631
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=12.8 mas, bmaj=43.9 mas, bpa=27.35 degrees
! Estimated noise=7.52733 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.551e-05 Jy
! Component: 100  -  total flux cleaned = 0.000335656 Jy
! Component: 150  -  total flux cleaned = 0.000548906 Jy
! Component: 200  -  total flux cleaned = 0.00079159 Jy
! Total flux subtracted in 200 components = 0.00079159 Jy
! Clean residual min=-0.000577 max=0.000574 Jy/beam
! Clean residual mean=0.000004 rms=0.000235 Jy/beam
! Combined flux in latest and established models = 0.0885918 Jy
selfcal
! Performing phase self-cal
! Adding 69 model components to the UV plane model.
! The established model now contains 433 components and 0.0885918 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.079442Jy  sigma=0.161579
! Fit after  self-cal, rms=0.079462Jy  sigma=0.161575
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000195565 Jy
! Component: 100  -  total flux cleaned = -9.88831e-05 Jy
! Component: 150  -  total flux cleaned = 0.000120193 Jy
! Component: 200  -  total flux cleaned = 0.000152967 Jy
! Total flux subtracted in 200 components = 0.000152967 Jy
! Clean residual min=-0.000537 max=0.000529 Jy/beam
! Clean residual mean=0.000003 rms=0.000214 Jy/beam
! Combined flux in latest and established models = 0.0887448 Jy
! Performing phase self-cal
! Adding 68 model components to the UV plane model.
! The established model now contains 481 components and 0.0887448 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.079434Jy  sigma=0.161530
! Fit after  self-cal, rms=0.079442Jy  sigma=0.161527
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.079442Jy  sigma=0.161527
! Fit after  self-cal, rms=0.079219Jy  sigma=0.161523
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=13.52 mas, bmaj=43.16 mas, bpa=26.98 degrees
! Estimated noise=7.511 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.97787e-05 Jy
! Component: 100  -  total flux cleaned = 0.000320546 Jy
! Component: 150  -  total flux cleaned = 0.000488952 Jy
! Component: 200  -  total flux cleaned = 0.000571706 Jy
! Total flux subtracted in 200 components = 0.000571706 Jy
! Clean residual min=-0.000460 max=0.000460 Jy/beam
! Clean residual mean=0.000004 rms=0.000184 Jy/beam
! Combined flux in latest and established models = 0.0893165 Jy
selfcal
! Performing phase self-cal
! Adding 61 model components to the UV plane model.
! The established model now contains 526 components and 0.0893165 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.079189Jy  sigma=0.161490
! Fit after  self-cal, rms=0.079200Jy  sigma=0.161488
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000132059 Jy
! Component: 100  -  total flux cleaned = -5.24379e-05 Jy
! Component: 150  -  total flux cleaned = -8.62295e-07 Jy
! Component: 200  -  total flux cleaned = -5.41386e-05 Jy
! Total flux subtracted in 200 components = -5.41386e-05 Jy
! Clean residual min=-0.000441 max=0.000447 Jy/beam
! Clean residual mean=0.000003 rms=0.000174 Jy/beam
! Combined flux in latest and established models = 0.0892623 Jy
! Performing phase self-cal
! Adding 64 model components to the UV plane model.
! The established model now contains 566 components and 0.0892623 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.079181Jy  sigma=0.161455
! Fit after  self-cal, rms=0.079187Jy  sigma=0.161454
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=12.81 mas, bmaj=43.88 mas, bpa=27.34 degrees
! Estimated noise=7.50742 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 12.81 x 43.88 at 27.34 degrees (North through East)
! Clean map  min=-0.0047295  max=0.076205 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=10.7 mas, bmaj=49.46 mas, bpa=28.8 degrees
! Estimated noise=25.2746 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0625081 Jy
! Component: 100  -  total flux cleaned = 0.0667558 Jy
! Component: 150  -  total flux cleaned = 0.0658605 Jy
! Component: 200  -  total flux cleaned = 0.0671287 Jy
! Total flux subtracted in 200 components = 0.0671287 Jy
! Clean residual min=-0.004700 max=0.004717 Jy/beam
! Clean residual mean=-0.000021 rms=0.001974 Jy/beam
! Combined flux in latest and established models = 0.0671287 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 75 model components to the UV plane model.
! The established model now contains 75 components and 0.0671287 Jy
! Inverting map and beam 
! Estimated beam: bmin=12.81 mas, bmaj=43.88 mas, bpa=27.34 degrees
! Estimated noise=7.50742 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00119487 Jy
! Component: 100  -  total flux cleaned = 0.00251791 Jy
! Component: 150  -  total flux cleaned = 0.0042287 Jy
! Component: 200  -  total flux cleaned = 0.00392399 Jy
! Total flux subtracted in 200 components = 0.00392399 Jy
! Clean residual min=-0.001719 max=0.001730 Jy/beam
! Clean residual mean=-0.000004 rms=0.000802 Jy/beam
! Combined flux in latest and established models = 0.0710526 Jy
! Adding 94 model components to the UV plane model.
! The established model now contains 169 components and 0.0710526 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=13.52 mas, bmaj=43.16 mas, bpa=26.98 degrees
! Estimated noise=7.511 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000258178 Jy
! Component: 100  -  total flux cleaned = -0.000337117 Jy
! Component: 150  -  total flux cleaned = -0.000517188 Jy
! Component: 200  -  total flux cleaned = -0.00073345 Jy
! Total flux subtracted in 200 components = -0.00073345 Jy
! Clean residual min=-0.000846 max=0.000846 Jy/beam
! Clean residual mean=0.000002 rms=0.000367 Jy/beam
! Combined flux in latest and established models = 0.0703192 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.57286e-06 Jy
! Component: 100  -  total flux cleaned = 4.69393e-05 Jy
! Component: 150  -  total flux cleaned = -1.90975e-06 Jy
! Component: 200  -  total flux cleaned = -0.000106439 Jy
! Total flux subtracted in 200 components = -0.000106439 Jy
! Clean residual min=-0.000898 max=0.000886 Jy/beam
! Clean residual mean=0.000004 rms=0.000327 Jy/beam
! Combined flux in latest and established models = 0.0702127 Jy
! Adding 125 model components to the UV plane model.
! The established model now contains 292 components and 0.0702127 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=12.81 mas, bmaj=43.88 mas, bpa=27.34 degrees
! Estimated noise=7.50742 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00107056 Jy
! Component: 100  -  total flux cleaned = -0.00107712 Jy
! Component: 150  -  total flux cleaned = -0.000851625 Jy
! Component: 200  -  total flux cleaned = -0.000558165 Jy
! Total flux subtracted in 200 components = -0.000558165 Jy
! Clean residual min=-0.000612 max=0.000601 Jy/beam
! Clean residual mean=0.000004 rms=0.000232 Jy/beam
! Combined flux in latest and established models = 0.0696546 Jy
selfcal
! Performing phase self-cal
! Adding 41 model components to the UV plane model.
! The established model now contains 328 components and 0.0696546 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.079246Jy  sigma=0.161601
! Fit after  self-cal, rms=0.079242Jy  sigma=0.161577
wmodel /g0/scr/pima/npcsb_uvs/J1155+8157_S_map.mod
! Writing 328 model components to file: /g0/scr/pima/npcsb_uvs/J1155+8157_S_map.mod
wobs /g0/scr/pima/npcsb_uvs/J1155+8157_S_uvs.fits
! Writing UV FITS file: /g0/scr/pima/npcsb_uvs/J1155+8157_S_uvs.fits
wwins /g0/scr/pima/npcsb_uvs/J1155+8157_S_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
![Exited script file: /home/lpetrov/bin/01_muppet]
! 
wmap "/g0/scr/pima/npcsb_uvs/J1155+8157_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 12.81 x 43.88 at 27.34 degrees (North through East)
! Clean map  min=-0.0065295  max=0.072337 Jy/beam
! Writing clean map to FITS file: /g0/scr/pima/npcsb_uvs/J1155+8157_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.072337 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000208583 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.865047 0.865047 1.73009 3.46019 6.92038 13.8408 27.6815 55.363
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0006 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.072 
quit
! Quitting program
! Log file /g0/scr/pima/npcsb_uvs/J1155+8157_S_uvs.log closed on Wed Sep 25 00:11:04 2013