! Started logfile: /g0/scr/pima/npcsb_uvs/J1058+8114_X_uvs.log on Wed Sep 25 00:05:14 2013
obs /g0/scr/pima/npcsb_uvs/J1058+8114_X_uva.fits
! Reading UV FITS file: /g0/scr/pima/npcsb_uvs/J1058+8114_X_uva.fits
! AN table 1: 24 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.756481 visibilities/baseline/integration-bin.
! Found source: J1058+8114
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.40993e+09        8e+06          1        8e+06
!  02        2  8.47993e+09        8e+06          1        8e+06
!  03        3  8.79493e+09        8e+06          1        8e+06
!  04        4  8.89993e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 3268 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.2 
print "taper_size =",taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsb_uvs/J1058+8114_X]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 44 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 44 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 44 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 44 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.210927Jy  sigma=2.547768
! Fit after  self-cal, rms=0.468156Jy  sigma=0.856962
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6772 mas, bmaj=1.89 mas, bpa=-78.13 degrees
! Estimated noise=9.59251 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.444436 Jy
! Component: 100  -  total flux cleaned = 0.589927 Jy
! Total flux subtracted in 100 components = 0.589927 Jy
! Clean residual min=-0.033515 max=0.080176 Jy/beam
! Clean residual mean=0.000279 rms=0.008833 Jy/beam
! Combined flux in latest and established models = 0.589927 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.589927 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.230384Jy  sigma=0.435947
! Fit after  self-cal, rms=0.229280Jy  sigma=0.432789
! Inverting map 
! Added new window around map position (1.4, -1.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0850045 Jy
! Component: 100  -  total flux cleaned = 0.135389 Jy
! Total flux subtracted in 100 components = 0.135389 Jy
! Clean residual min=-0.025497 max=0.058683 Jy/beam
! Clean residual mean=0.000123 rms=0.005972 Jy/beam
! Combined flux in latest and established models = 0.725316 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 10 components and 0.725316 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.188828Jy  sigma=0.319876
! Fit after  self-cal, rms=0.187612Jy  sigma=0.312790
! Inverting map 
! Added new window around map position (-1, 1.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0467258 Jy
! Component: 100  -  total flux cleaned = 0.076478 Jy
! Total flux subtracted in 100 components = 0.076478 Jy
! Clean residual min=-0.021204 max=0.023792 Jy/beam
! Clean residual mean=0.000037 rms=0.004697 Jy/beam
! Combined flux in latest and established models = 0.801794 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 19 components and 0.801794 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.172120Jy  sigma=0.271179
! Fit after  self-cal, rms=0.172216Jy  sigma=0.270842
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.846 mas, bmaj=2.179 mas, bpa=-79.59 degrees
! Estimated noise=6.26041 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.029771 Jy
! Component: 100  -  total flux cleaned = 0.0483511 Jy
! Component: 150  -  total flux cleaned = 0.0606861 Jy
! Component: 200  -  total flux cleaned = 0.0675585 Jy
! Total flux subtracted in 200 components = 0.0675585 Jy
! Clean residual min=-0.021679 max=0.018644 Jy/beam
! Clean residual mean=-0.000079 rms=0.004377 Jy/beam
! Combined flux in latest and established models = 0.869353 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 44 components and 0.869353 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.166339Jy  sigma=0.256006
! Fit after  self-cal, rms=0.166193Jy  sigma=0.255565
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00     HN        0.99     KP        1.00     
!   LA        1.01     MK        1.00     NL        1.18     OV        0.95     
!   PT        1.03     SC        1.08     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.98     HN        0.98     KP        0.93     
!   LA        0.94     MK        0.97     NL        1.17     OV        0.95     
!   PT        1.05     SC        1.03     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        1.02     HN        0.91     KP        0.84     
!   LA        0.95     MK        0.99     NL        1.10     OV        0.95     
!   PT        1.06     SC        0.99     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.06     HN        0.91     KP        0.88     
!   LA        0.93     MK        1.00     NL        1.07     OV        0.98     
!   PT        1.15     SC        1.00     
! 
! 
! Fit before self-cal, rms=0.166193Jy  sigma=0.255565
! Fit after  self-cal, rms=0.152810Jy  sigma=0.223152
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8442 mas, bmaj=2.169 mas, bpa=-79.9 degrees
! Estimated noise=6.26724 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00767263 Jy
! Component: 100  -  total flux cleaned = -0.0102065 Jy
! Component: 150  -  total flux cleaned = -0.011945 Jy
! Component: 200  -  total flux cleaned = -0.0134069 Jy
! Total flux subtracted in 200 components = -0.0134069 Jy
! Clean residual min=-0.013866 max=0.013244 Jy/beam
! Clean residual mean=-0.000026 rms=0.002752 Jy/beam
! Combined flux in latest and established models = 0.855946 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 59 components and 0.855946 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.151406Jy  sigma=0.219250
! Fit after  self-cal, rms=0.151960Jy  sigma=0.218912
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.151960Jy  sigma=0.218912
! Fit after  self-cal, rms=0.152738Jy  sigma=0.213057
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8424 mas, bmaj=2.168 mas, bpa=-79.55 degrees
! Estimated noise=6.24704 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00549103 Jy
! Component: 100  -  total flux cleaned = -0.00840992 Jy
! Component: 150  -  total flux cleaned = -0.0103788 Jy
! Component: 200  -  total flux cleaned = -0.0118709 Jy
! Total flux subtracted in 200 components = -0.0118709 Jy
! Clean residual min=-0.010475 max=0.010786 Jy/beam
! Clean residual mean=0.000027 rms=0.002202 Jy/beam
! Combined flux in latest and established models = 0.844075 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 67 components and 0.844075 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.151852Jy  sigma=0.211027
! Fit after  self-cal, rms=0.151722Jy  sigma=0.210918
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000632289 Jy
! Component: 100  -  total flux cleaned = -0.00139463 Jy
! Component: 150  -  total flux cleaned = -0.00247375 Jy
! Component: 200  -  total flux cleaned = -0.00303027 Jy
! Total flux subtracted in 200 components = -0.00303027 Jy
! Clean residual min=-0.008790 max=0.008685 Jy/beam
! Clean residual mean=0.000033 rms=0.002034 Jy/beam
! Combined flux in latest and established models = 0.841045 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 80 components and 0.841045 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.150548Jy  sigma=0.208087
! Fit after  self-cal, rms=0.150514Jy  sigma=0.207975
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.150514Jy  sigma=0.207975
! Fit after  self-cal, rms=0.150341Jy  sigma=0.207462
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8415 mas, bmaj=2.164 mas, bpa=-79.59 degrees
! Estimated noise=6.22741 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00469922 Jy
! Component: 100  -  total flux cleaned = -0.00594148 Jy
! Component: 150  -  total flux cleaned = -0.00657509 Jy
! Component: 200  -  total flux cleaned = -0.00701472 Jy
! Total flux subtracted in 200 components = -0.00701472 Jy
! Clean residual min=-0.008478 max=0.007803 Jy/beam
! Clean residual mean=0.000026 rms=0.001933 Jy/beam
! Combined flux in latest and established models = 0.83403 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 90 components and 0.83403 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.149844Jy  sigma=0.206504
! Fit after  self-cal, rms=0.149806Jy  sigma=0.206487
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000445982 Jy
! Component: 100  -  total flux cleaned = -0.000832153 Jy
! Component: 150  -  total flux cleaned = -0.00107016 Jy
! Component: 200  -  total flux cleaned = -0.00118725 Jy
! Total flux subtracted in 200 components = -0.00118725 Jy
! Clean residual min=-0.008382 max=0.007854 Jy/beam
! Clean residual mean=0.000028 rms=0.001898 Jy/beam
! Combined flux in latest and established models = 0.832843 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 98 components and 0.832843 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.149584Jy  sigma=0.206021
! Fit after  self-cal, rms=0.149562Jy  sigma=0.206011
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.149562Jy  sigma=0.206011
! Fit after  self-cal, rms=0.149296Jy  sigma=0.205760
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.252 mas, bmaj=3.578 mas, bpa=-78.26 degrees
! Estimated noise=7.71355 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00374315 Jy
! Component: 100  -  total flux cleaned = -0.00454934 Jy
! Component: 150  -  total flux cleaned = -0.00482176 Jy
! Component: 200  -  total flux cleaned = -0.00529571 Jy
! Total flux subtracted in 200 components = -0.00529571 Jy
! Clean residual min=-0.008527 max=0.008327 Jy/beam
! Clean residual mean=0.000055 rms=0.002460 Jy/beam
! Combined flux in latest and established models = 0.827547 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 117 components and 0.827547 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.148954Jy  sigma=0.205530
! Fit after  self-cal, rms=0.148944Jy  sigma=0.205442
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000104089 Jy
! Component: 100  -  total flux cleaned = -0.000234226 Jy
! Component: 150  -  total flux cleaned = -0.000532518 Jy
! Component: 200  -  total flux cleaned = -0.000881536 Jy
! Total flux subtracted in 200 components = -0.000881536 Jy
! Clean residual min=-0.008410 max=0.008485 Jy/beam
! Clean residual mean=0.000057 rms=0.002413 Jy/beam
! Combined flux in latest and established models = 0.826666 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 122 components and 0.826666 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.148853Jy  sigma=0.205491
! Fit after  self-cal, rms=0.148849Jy  sigma=0.205441
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8411 mas, bmaj=2.163 mas, bpa=-79.59 degrees
! Estimated noise=6.20867 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8411 x 2.163 at -79.59 degrees (North through East)
! Clean map  min=-0.013321  max=0.55787 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.148849Jy  sigma=0.205441
! Fit after  self-cal, rms=0.599530Jy  sigma=0.186913
! Inverting map and beam 
! Estimated beam: bmin=0.8393 mas, bmaj=2.162 mas, bpa=-79.6 degrees
! Estimated noise=6.19576 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00269092 Jy
! Component: 100  -  total flux cleaned = -0.00374044 Jy
! Component: 150  -  total flux cleaned = -0.00408669 Jy
! Component: 200  -  total flux cleaned = -0.00441069 Jy
! Total flux subtracted in 200 components = -0.00441069 Jy
! Clean residual min=-0.007287 max=0.007111 Jy/beam
! Clean residual mean=0.000023 rms=0.001756 Jy/beam
! Combined flux in latest and established models = 0.822255 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 135 components and 0.822255 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.599423Jy  sigma=0.186275
! Fit after  self-cal, rms=0.599372Jy  sigma=0.186264
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00041685 Jy
! Component: 100  -  total flux cleaned = -0.000514916 Jy
! Component: 150  -  total flux cleaned = -0.000698634 Jy
! Component: 200  -  total flux cleaned = -0.000870134 Jy
! Total flux subtracted in 200 components = -0.000870134 Jy
! Clean residual min=-0.007182 max=0.007147 Jy/beam
! Clean residual mean=0.000024 rms=0.001739 Jy/beam
! Combined flux in latest and established models = 0.821385 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 138 components and 0.821385 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.599309Jy  sigma=0.185977
! Fit after  self-cal, rms=0.599291Jy  sigma=0.185967
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.599291Jy  sigma=0.185967
! Fit after  self-cal, rms=0.610321Jy  sigma=0.185845
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.671 mas, bmaj=1.868 mas, bpa=-78 degrees
! Estimated noise=9.4526 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.437843 Jy
! Component: 100  -  total flux cleaned = 0.592109 Jy
! Component: 150  -  total flux cleaned = 0.673042 Jy
! Component: 200  -  total flux cleaned = 0.719514 Jy
! Total flux subtracted in 200 components = 0.719514 Jy
! Clean residual min=-0.014228 max=0.024925 Jy/beam
! Clean residual mean=0.000124 rms=0.003838 Jy/beam
! Combined flux in latest and established models = 0.719514 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 17 model components to the UV plane model.
! The established model now contains 17 components and 0.719514 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8392 mas, bmaj=2.16 mas, bpa=-79.58 degrees
! Estimated noise=6.18877 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0416029 Jy
! Component: 100  -  total flux cleaned = 0.0658407 Jy
! Component: 150  -  total flux cleaned = 0.0812764 Jy
! Component: 200  -  total flux cleaned = 0.0867781 Jy
! Total flux subtracted in 200 components = 0.0867781 Jy
! Clean residual min=-0.010221 max=0.011306 Jy/beam
! Clean residual mean=0.000058 rms=0.002193 Jy/beam
! Combined flux in latest and established models = 0.806292 Jy
! Adding 29 model components to the UV plane model.
! The established model now contains 37 components and 0.806292 Jy
! Inverting map 
! Added new window around map position (0.4, -2.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0051299 Jy
! Component: 100  -  total flux cleaned = 0.00511759 Jy
! Component: 150  -  total flux cleaned = 0.00482866 Jy
! Component: 200  -  total flux cleaned = 0.00541226 Jy
! Total flux subtracted in 200 components = 0.00541226 Jy
! Clean residual min=-0.008828 max=0.008609 Jy/beam
! Clean residual mean=0.000043 rms=0.001943 Jy/beam
! Combined flux in latest and established models = 0.811704 Jy
! Adding 30 model components to the UV plane model.
! The established model now contains 57 components and 0.811704 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.255 mas, bmaj=3.576 mas, bpa=-78.03 degrees
! Estimated noise=7.70671 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00278394 Jy
! Component: 100  -  total flux cleaned = 0.00297929 Jy
! Component: 150  -  total flux cleaned = 0.00316671 Jy
! Component: 200  -  total flux cleaned = 0.00282853 Jy
! Total flux subtracted in 200 components = 0.00282853 Jy
! Clean residual min=-0.009001 max=0.008487 Jy/beam
! Clean residual mean=0.000068 rms=0.002403 Jy/beam
! Combined flux in latest and established models = 0.814533 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000305774 Jy
! Component: 100  -  total flux cleaned = -0.000583597 Jy
! Component: 150  -  total flux cleaned = -0.000707922 Jy
! Component: 200  -  total flux cleaned = -0.000827291 Jy
! Total flux subtracted in 200 components = -0.000827291 Jy
! Clean residual min=-0.008378 max=0.008805 Jy/beam
! Clean residual mean=0.000067 rms=0.002336 Jy/beam
! Combined flux in latest and established models = 0.813706 Jy
! Adding 40 model components to the UV plane model.
! The established model now contains 96 components and 0.813706 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8392 mas, bmaj=2.16 mas, bpa=-79.58 degrees
! Estimated noise=6.18877 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000496124 Jy
! Component: 100  -  total flux cleaned = 4.42924e-05 Jy
! Component: 150  -  total flux cleaned = -0.000334858 Jy
! Component: 200  -  total flux cleaned = -0.000156275 Jy
! Total flux subtracted in 200 components = -0.000156275 Jy
! Clean residual min=-0.007440 max=0.008259 Jy/beam
! Clean residual mean=0.000030 rms=0.001752 Jy/beam
! Combined flux in latest and established models = 0.813549 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 111 components and 0.813549 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.610386Jy  sigma=0.186556
! Fit after  self-cal, rms=0.610354Jy  sigma=0.186340
wmodel /g0/scr/pima/npcsb_uvs/J1058+8114_X_map.mod
! Writing 111 model components to file: /g0/scr/pima/npcsb_uvs/J1058+8114_X_map.mod
wobs /g0/scr/pima/npcsb_uvs/J1058+8114_X_uvs.fits
! Writing UV FITS file: /g0/scr/pima/npcsb_uvs/J1058+8114_X_uvs.fits
wwins /g0/scr/pima/npcsb_uvs/J1058+8114_X_map.win
! wwins: Wrote 5 windows to /g0/scr/pima/npcsb_uvs/J1058+8114_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000634711 Jy
! Component: 100  -  total flux cleaned = 0.0010299 Jy
! Component: 150  -  total flux cleaned = 0.0015239 Jy
! Component: 200  -  total flux cleaned = 0.00152615 Jy
! Component: 250  -  total flux cleaned = 0.00163985 Jy
! Component: 300  -  total flux cleaned = 0.00119464 Jy
! Component: 350  -  total flux cleaned = 0.00130179 Jy
! Component: 400  -  total flux cleaned = 0.0011946 Jy
! Component: 450  -  total flux cleaned = 0.000680398 Jy
! Component: 500  -  total flux cleaned = 0.000680372 Jy
! Component: 550  -  total flux cleaned = 0.000383951 Jy
! Component: 600  -  total flux cleaned = 9.47628e-05 Jy
! Component: 650  -  total flux cleaned = -9.25286e-05 Jy
! Component: 700  -  total flux cleaned = -0.0001836 Jy
! Component: 750  -  total flux cleaned = -1.26883e-06 Jy
! Component: 800  -  total flux cleaned = -0.000270057 Jy
! Component: 850  -  total flux cleaned = -0.000181937 Jy
! Component: 900  -  total flux cleaned = -0.000268673 Jy
! Component: 950  -  total flux cleaned = -0.000354261 Jy
! Component: 1000  -  total flux cleaned = -0.00027048 Jy
! Component: 1050  -  total flux cleaned = -0.000187028 Jy
! Component: 1100  -  total flux cleaned = -0.000186507 Jy
! Component: 1150  -  total flux cleaned = -2.4832e-05 Jy
! Component: 1200  -  total flux cleaned = -0.000104806 Jy
! Component: 1250  -  total flux cleaned = -2.77596e-05 Jy
! Component: 1300  -  total flux cleaned = 0.000203027 Jy
! Component: 1350  -  total flux cleaned = 0.000127784 Jy
! Component: 1400  -  total flux cleaned = 0.000429427 Jy
! Component: 1450  -  total flux cleaned = 0.000503205 Jy
! Component: 1500  -  total flux cleaned = 0.000502069 Jy
! Component: 1550  -  total flux cleaned = 0.000429011 Jy
! Component: 1600  -  total flux cleaned = 0.00050007 Jy
! Component: 1650  -  total flux cleaned = 0.000358541 Jy
! Component: 1700  -  total flux cleaned = 0.000569646 Jy
! Component: 1750  -  total flux cleaned = 0.000571606 Jy
! Component: 1800  -  total flux cleaned = 0.000914734 Jy
! Component: 1850  -  total flux cleaned = 0.000914203 Jy
! Component: 1900  -  total flux cleaned = 0.00104835 Jy
! Component: 1950  -  total flux cleaned = 0.000981569 Jy
! Component: 2000  -  total flux cleaned = 0.00111345 Jy
! Component: 2050  -  total flux cleaned = 0.00130801 Jy
! Component: 2100  -  total flux cleaned = 0.00130766 Jy
! Component: 2150  -  total flux cleaned = 0.00137092 Jy
! Component: 2200  -  total flux cleaned = 0.00111883 Jy
! Component: 2250  -  total flux cleaned = 0.00099376 Jy
! Component: 2300  -  total flux cleaned = 0.00111783 Jy
! Component: 2350  -  total flux cleaned = 0.00111832 Jy
! Component: 2400  -  total flux cleaned = 0.00099628 Jy
! Component: 2450  -  total flux cleaned = 0.000875738 Jy
! Component: 2500  -  total flux cleaned = 0.00105423 Jy
! Component: 2550  -  total flux cleaned = 0.000876806 Jy
! Component: 2600  -  total flux cleaned = 0.000994492 Jy
! Component: 2650  -  total flux cleaned = 0.000935215 Jy
! Component: 2700  -  total flux cleaned = 0.000820673 Jy
! Component: 2750  -  total flux cleaned = 0.000878104 Jy
! Component: 2800  -  total flux cleaned = 0.00104874 Jy
! Component: 2850  -  total flux cleaned = 0.00110427 Jy
! Component: 2900  -  total flux cleaned = 0.00121532 Jy
! Component: 2950  -  total flux cleaned = 0.00110557 Jy
! Component: 3000  -  total flux cleaned = 0.00121554 Jy
! Component: 3050  -  total flux cleaned = 0.00137809 Jy
! Component: 3100  -  total flux cleaned = 0.00121707 Jy
! Component: 3150  -  total flux cleaned = 0.0013778 Jy
! Component: 3200  -  total flux cleaned = 0.00158984 Jy
! Component: 3250  -  total flux cleaned = 0.00158935 Jy
! Component: 3300  -  total flux cleaned = 0.00164078 Jy
! Component: 3350  -  total flux cleaned = 0.00164 Jy
! Component: 3400  -  total flux cleaned = 0.00158822 Jy
! Component: 3450  -  total flux cleaned = 0.00148612 Jy
! Component: 3500  -  total flux cleaned = 0.00168873 Jy
! Component: 3550  -  total flux cleaned = 0.00183957 Jy
! Component: 3600  -  total flux cleaned = 0.00183974 Jy
! Component: 3650  -  total flux cleaned = 0.0017909 Jy
! Component: 3700  -  total flux cleaned = 0.00164375 Jy
! Component: 3750  -  total flux cleaned = 0.00183885 Jy
! Component: 3800  -  total flux cleaned = 0.00198358 Jy
! Component: 3850  -  total flux cleaned = 0.00193515 Jy
! Component: 3900  -  total flux cleaned = 0.00198263 Jy
! Component: 3950  -  total flux cleaned = 0.00179267 Jy
! Component: 4000  -  total flux cleaned = 0.00188795 Jy
! Component: 4050  -  total flux cleaned = 0.00198198 Jy
! Total flux subtracted in 4096 components = 0.00207497 Jy
! Clean residual min=-0.003281 max=0.002911 Jy/beam
! Clean residual mean=0.000008 rms=0.000821 Jy/beam
! Combined flux in latest and established models = 0.815624 Jy
keep
! Adding 327 model components to the UV plane model.
! The established model now contains 438 components and 0.815625 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/g0/scr/pima/npcsb_uvs/J1058+8114_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8392 x 2.16 at -79.58 degrees (North through East)
! Clean map  min=-0.0090948  max=0.56407 Jy/beam
! Writing clean map to FITS file: /g0/scr/pima/npcsb_uvs/J1058+8114_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.564068 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000815782 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.433874 0.433874 0.867748 1.7355 3.47099 6.94199 13.884 27.768 55.5359
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0024 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.564 
quit
! Quitting program
! Log file /g0/scr/pima/npcsb_uvs/J1058+8114_X_uvs.log closed on Wed Sep 25 00:05:19 2013