! Started logfile: /g0/scr/pima/npcsb_uvs/J1025+8144_S_uvs.log on Wed Sep 25 00:10:36 2013
obs /g0/scr/pima/npcsb_uvs/J1025+8144_S_uva.fits
! Reading UV FITS file: /g0/scr/pima/npcsb_uvs/J1025+8144_S_uva.fits
! AN table 1: 46 integrations on 15 of 15 possible baselines.
! Apparent sampling: 0.455072 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: J1025+8144
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23693e+09        8e+06          1        8e+06
!  02        2  2.26693e+09        8e+06          1        8e+06
!  03        3  2.35693e+09        8e+06          1        8e+06
!  04        4  2.37693e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 1256 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsb_uvs/J1025+8144_S]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 100 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 100 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 100 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 100 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.018149Jy  sigma=2.325265
! Fit after  self-cal, rms=0.937898Jy  sigma=2.185249
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=8.789 mas, bmaj=91.63 mas, bpa=29.73 degrees
! Estimated noise=18.4571 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.047097 Jy
! Component: 100  -  total flux cleaned = 0.0515531 Jy
! Total flux subtracted in 100 components = 0.0515531 Jy
! Clean residual min=-0.004572 max=0.004542 Jy/beam
! Clean residual mean=-0.000004 rms=0.001590 Jy/beam
! Combined flux in latest and established models = 0.0515531 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 14 components and 0.0515531 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061197Jy  sigma=0.134297
! Fit after  self-cal, rms=0.060460Jy  sigma=0.132866
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=10.31 mas, bmaj=69.66 mas, bpa=29.46 degrees
! Estimated noise=10.4517 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00269135 Jy
! Component: 100  -  total flux cleaned = 0.00221799 Jy
! Component: 150  -  total flux cleaned = 0.00235535 Jy
! Component: 200  -  total flux cleaned = 0.00235484 Jy
! Total flux subtracted in 200 components = 0.00235484 Jy
! Clean residual min=-0.002196 max=0.002164 Jy/beam
! Clean residual mean=0.000003 rms=0.000738 Jy/beam
! Combined flux in latest and established models = 0.0539079 Jy
! Performing phase self-cal
! Adding 52 model components to the UV plane model.
! The established model now contains 64 components and 0.0539079 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059480Jy  sigma=0.130976
! Fit after  self-cal, rms=0.059358Jy  sigma=0.130703
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        0.95     KP        1.09     LA        1.00*    
!   OV        0.91     PT        1.27     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.19     KP        0.85     LA        1.00*    
!   OV        1.01     PT        0.78     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        0.96     KP        1.02     LA        1.00*    
!   OV        1.00     PT        1.08     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        0.99     KP        0.86     LA        1.00*    
!   OV        1.07     PT        0.82     
! 
! 
! Fit before self-cal, rms=0.059358Jy  sigma=0.130703
! Fit after  self-cal, rms=0.058254Jy  sigma=0.129326
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=10.36 mas, bmaj=69.09 mas, bpa=29.49 degrees
! Estimated noise=10.193 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000221196 Jy
! Component: 100  -  total flux cleaned = -0.00012496 Jy
! Component: 150  -  total flux cleaned = -0.000564193 Jy
! Component: 200  -  total flux cleaned = -0.000994076 Jy
! Total flux subtracted in 200 components = -0.000994076 Jy
! Clean residual min=-0.000881 max=0.000883 Jy/beam
! Clean residual mean=-0.000001 rms=0.000288 Jy/beam
! Combined flux in latest and established models = 0.0529138 Jy
! Performing phase self-cal
! Adding 38 model components to the UV plane model.
! The established model now contains 100 components and 0.0529138 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058182Jy  sigma=0.129198
! Fit after  self-cal, rms=0.058433Jy  sigma=0.128869
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058433Jy  sigma=0.128869
! Fit after  self-cal, rms=0.059047Jy  sigma=0.128799
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=10.37 mas, bmaj=68.85 mas, bpa=29.52 degrees
! Estimated noise=10.1814 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00029199 Jy
! Component: 100  -  total flux cleaned = -0.000127533 Jy
! Component: 150  -  total flux cleaned = -0.000484466 Jy
! Component: 200  -  total flux cleaned = -0.000731979 Jy
! Total flux subtracted in 200 components = -0.000731979 Jy
! Clean residual min=-0.000821 max=0.000825 Jy/beam
! Clean residual mean=-0.000001 rms=0.000267 Jy/beam
! Combined flux in latest and established models = 0.0521818 Jy
selfcal
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 132 components and 0.0521818 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058992Jy  sigma=0.128696
! Fit after  self-cal, rms=0.059101Jy  sigma=0.128571
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00110915 Jy
! Component: 100  -  total flux cleaned = -0.00138556 Jy
! Component: 150  -  total flux cleaned = -0.00130332 Jy
! Component: 200  -  total flux cleaned = -0.00122041 Jy
! Total flux subtracted in 200 components = -0.00122041 Jy
! Clean residual min=-0.000699 max=0.000699 Jy/beam
! Clean residual mean=-0.000001 rms=0.000229 Jy/beam
! Combined flux in latest and established models = 0.0509614 Jy
! Performing phase self-cal
! Adding 51 model components to the UV plane model.
! The established model now contains 180 components and 0.0509614 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059050Jy  sigma=0.128451
! Fit after  self-cal, rms=0.059065Jy  sigma=0.128425
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059065Jy  sigma=0.128425
! Fit after  self-cal, rms=0.060022Jy  sigma=0.128437
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=10.37 mas, bmaj=68.83 mas, bpa=29.54 degrees
! Estimated noise=10.2936 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00114929 Jy
! Component: 100  -  total flux cleaned = -0.00173238 Jy
! Component: 150  -  total flux cleaned = -0.0022895 Jy
! Component: 200  -  total flux cleaned = -0.00284171 Jy
! Total flux subtracted in 200 components = -0.00284171 Jy
! Clean residual min=-0.000841 max=0.000828 Jy/beam
! Clean residual mean=-0.000001 rms=0.000290 Jy/beam
! Combined flux in latest and established models = 0.0481197 Jy
selfcal
! Performing phase self-cal
! Adding 43 model components to the UV plane model.
! The established model now contains 216 components and 0.0481197 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059949Jy  sigma=0.128291
! Fit after  self-cal, rms=0.060001Jy  sigma=0.128251
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000582367 Jy
! Component: 100  -  total flux cleaned = -0.000656746 Jy
! Component: 150  -  total flux cleaned = -0.000916631 Jy
! Component: 200  -  total flux cleaned = -0.00124813 Jy
! Total flux subtracted in 200 components = -0.00124813 Jy
! Clean residual min=-0.000612 max=0.000613 Jy/beam
! Clean residual mean=-0.000001 rms=0.000213 Jy/beam
! Combined flux in latest and established models = 0.0468716 Jy
! Performing phase self-cal
! Adding 55 model components to the UV plane model.
! The established model now contains 264 components and 0.0468716 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059974Jy  sigma=0.128173
! Fit after  self-cal, rms=0.059992Jy  sigma=0.128155
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059992Jy  sigma=0.128155
! Fit after  self-cal, rms=0.060782Jy  sigma=0.128157
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=10.77 mas, bmaj=67.3 mas, bpa=29.63 degrees
! Estimated noise=10.4219 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000998838 Jy
! Component: 100  -  total flux cleaned = -0.00165899 Jy
! Component: 150  -  total flux cleaned = -0.00206553 Jy
! Component: 200  -  total flux cleaned = -0.00218271 Jy
! Total flux subtracted in 200 components = -0.00218271 Jy
! Clean residual min=-0.000655 max=0.000655 Jy/beam
! Clean residual mean=-0.000001 rms=0.000234 Jy/beam
! Combined flux in latest and established models = 0.0446889 Jy
selfcal
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 288 components and 0.0446889 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.060722Jy  sigma=0.128046
! Fit after  self-cal, rms=0.060700Jy  sigma=0.127995
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000198481 Jy
! Component: 100  -  total flux cleaned = -0.00016095 Jy
! Component: 150  -  total flux cleaned = -5.07993e-05 Jy
! Component: 200  -  total flux cleaned = 5.82026e-05 Jy
! Total flux subtracted in 200 components = 5.82026e-05 Jy
! Clean residual min=-0.000605 max=0.000610 Jy/beam
! Clean residual mean=-0.000001 rms=0.000192 Jy/beam
! Combined flux in latest and established models = 0.0447471 Jy
! Performing phase self-cal
! Adding 38 model components to the UV plane model.
! The established model now contains 315 components and 0.0447471 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.060676Jy  sigma=0.127929
! Fit after  self-cal, rms=0.060645Jy  sigma=0.127900
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=10.34 mas, bmaj=68.89 mas, bpa=29.57 degrees
! Estimated noise=10.3771 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 10.34 x 68.89 at 29.57 degrees (North through East)
! Clean map  min=-0.0058484  max=0.057553 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.904 mas, bmaj=88.49 mas, bpa=29.78 degrees
! Estimated noise=19.3602 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0475346 Jy
! Component: 100  -  total flux cleaned = 0.0482844 Jy
! Component: 150  -  total flux cleaned = 0.0383452 Jy
! Component: 200  -  total flux cleaned = 0.0314433 Jy
! Total flux subtracted in 200 components = 0.0314433 Jy
! Clean residual min=-0.009554 max=0.009532 Jy/beam
! Clean residual mean=0.000006 rms=0.002693 Jy/beam
! Combined flux in latest and established models = 0.0314433 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 36 model components to the UV plane model.
! The established model now contains 36 components and 0.0314433 Jy
! Inverting map and beam 
! Estimated beam: bmin=10.34 mas, bmaj=68.89 mas, bpa=29.57 degrees
! Estimated noise=10.3771 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00215022 Jy
! Component: 100  -  total flux cleaned = 0.00238103 Jy
! Component: 150  -  total flux cleaned = 0.00377649 Jy
! Component: 200  -  total flux cleaned = 0.00466322 Jy
! Total flux subtracted in 200 components = 0.00466322 Jy
! Clean residual min=-0.001769 max=0.001757 Jy/beam
! Clean residual mean=0.000003 rms=0.000590 Jy/beam
! Combined flux in latest and established models = 0.0361065 Jy
! Adding 60 model components to the UV plane model.
! The established model now contains 96 components and 0.0361065 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=10.77 mas, bmaj=67.3 mas, bpa=29.63 degrees
! Estimated noise=10.4219 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000210544 Jy
! Component: 100  -  total flux cleaned = 6.42527e-05 Jy
! Component: 150  -  total flux cleaned = 0.000164223 Jy
! Component: 200  -  total flux cleaned = 0.000914747 Jy
! Total flux subtracted in 200 components = 0.000914747 Jy
! Clean residual min=-0.001697 max=0.001729 Jy/beam
! Clean residual mean=0.000005 rms=0.000542 Jy/beam
! Combined flux in latest and established models = 0.0370213 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00105017 Jy
! Component: 100  -  total flux cleaned = 0.00221548 Jy
! Component: 150  -  total flux cleaned = 0.0036542 Jy
! Component: 200  -  total flux cleaned = 0.00546605 Jy
! Total flux subtracted in 200 components = 0.00546605 Jy
! Clean residual min=-0.004184 max=0.004223 Jy/beam
! Clean residual mean=0.000007 rms=0.001307 Jy/beam
! Combined flux in latest and established models = 0.0424873 Jy
! Adding 75 model components to the UV plane model.
! The established model now contains 171 components and 0.0424873 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=10.34 mas, bmaj=68.89 mas, bpa=29.57 degrees
! Estimated noise=10.3771 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00306531 Jy
! Component: 100  -  total flux cleaned = 0.00216562 Jy
! Component: 150  -  total flux cleaned = 0.00180399 Jy
! Component: 200  -  total flux cleaned = 0.00124476 Jy
! Total flux subtracted in 200 components = 0.00124476 Jy
! Clean residual min=-0.001475 max=0.001404 Jy/beam
! Clean residual mean=-0.000002 rms=0.000409 Jy/beam
! Combined flux in latest and established models = 0.0437321 Jy
selfcal
! Performing phase self-cal
! Adding 58 model components to the UV plane model.
! The established model now contains 226 components and 0.0437321 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.060646Jy  sigma=0.127955
! Fit after  self-cal, rms=0.060572Jy  sigma=0.127745
wmodel /g0/scr/pima/npcsb_uvs/J1025+8144_S_map.mod
! Writing 226 model components to file: /g0/scr/pima/npcsb_uvs/J1025+8144_S_map.mod
wobs /g0/scr/pima/npcsb_uvs/J1025+8144_S_uvs.fits
! Writing UV FITS file: /g0/scr/pima/npcsb_uvs/J1025+8144_S_uvs.fits
wwins /g0/scr/pima/npcsb_uvs/J1025+8144_S_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
![Exited script file: /home/lpetrov/bin/01_muppet]
! 
wmap "/g0/scr/pima/npcsb_uvs/J1025+8144_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 10.34 x 68.89 at 29.57 degrees (North through East)
! Clean map  min=-0.0092415  max=0.045437 Jy/beam
! Writing clean map to FITS file: /g0/scr/pima/npcsb_uvs/J1025+8144_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0454367 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000371293 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -2.4515 2.4515 4.903 9.80599 19.612 39.224 78.448
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0011 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.045 
quit
! Quitting program
! Log file /g0/scr/pima/npcsb_uvs/J1025+8144_S_uvs.log closed on Wed Sep 25 00:10:40 2013