! Started logfile: /g0/scr/pima/npcsb_uvs/J1010+8250_S_uvs.log on Wed Sep 25 00:10:31 2013
obs /g0/scr/pima/npcsb_uvs/J1010+8250_S_uva.fits
! Reading UV FITS file: /g0/scr/pima/npcsb_uvs/J1010+8250_S_uva.fits
! AN table 1: 45 integrations on 45 of 45 possible baselines.
! Apparent sampling: 1 visibilities/baseline/integration-bin.
! Found source: J1010+8250
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23693e+09        8e+06          1        8e+06
!  02        2  2.26693e+09        8e+06          1        8e+06
!  03        3  2.35693e+09        8e+06          1        8e+06
!  04        4  2.37693e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 8100 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsb_uvs/J1010+8250_S]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=1.049265Jy  sigma=2.111373
! Fit after  self-cal, rms=0.773485Jy  sigma=1.558148
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.217 mas, bmaj=10.2 mas, bpa=7.799 degrees
! Estimated noise=8.11968 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.157143 Jy
! Component: 100  -  total flux cleaned = 0.212776 Jy
! Total flux subtracted in 100 components = 0.212776 Jy
! Clean residual min=-0.021110 max=0.031779 Jy/beam
! Clean residual mean=-0.000023 rms=0.005528 Jy/beam
! Combined flux in latest and established models = 0.212776 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.212776 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.143502Jy  sigma=0.270895
! Fit after  self-cal, rms=0.143322Jy  sigma=0.270573
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.991 mas, bmaj=10.83 mas, bpa=6.044 degrees
! Estimated noise=4.0022 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (7, 3).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0606951 Jy
! Component: 100  -  total flux cleaned = 0.0962783 Jy
! Component: 150  -  total flux cleaned = 0.112331 Jy
! Component: 200  -  total flux cleaned = 0.119774 Jy
! Total flux subtracted in 200 components = 0.119774 Jy
! Clean residual min=-0.014703 max=0.027731 Jy/beam
! Clean residual mean=-0.000026 rms=0.004252 Jy/beam
! Combined flux in latest and established models = 0.33255 Jy
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 40 components and 0.33255 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.111915Jy  sigma=0.206718
! Fit after  self-cal, rms=0.110072Jy  sigma=0.202504
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.78     FD        0.97     HN        0.99     KP        0.96     
!   LA        1.05     MK        0.95     NL        1.15     OV        0.93     
!   PT        1.03     SC        0.96     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.00     HN        1.03     KP        0.99     
!   LA        0.99     MK        0.96     NL        1.29     OV        0.92     
!   PT        0.96     SC        0.95     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.75     FD        1.04     HN        1.04     KP        0.97     
!   LA        0.81     MK        1.09     NL        1.36     OV        0.98     
!   PT        1.02     SC        1.03     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.04     HN        1.01     KP        0.89     
!   LA        0.72     MK        1.10     NL        1.33     OV        0.83     
!   PT        0.92     SC        1.07     
! 
! 
! Fit before self-cal, rms=0.110072Jy  sigma=0.202504
! Fit after  self-cal, rms=0.095052Jy  sigma=0.183579
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.03 mas, bmaj=10.78 mas, bpa=6.205 degrees
! Estimated noise=3.92966 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (17.5, -1).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0131329 Jy
! Component: 100  -  total flux cleaned = 0.0211896 Jy
! Component: 150  -  total flux cleaned = 0.0244403 Jy
! Component: 200  -  total flux cleaned = 0.0271881 Jy
! Total flux subtracted in 200 components = 0.0271881 Jy
! Clean residual min=-0.005591 max=0.004609 Jy/beam
! Clean residual mean=-0.000006 rms=0.001357 Jy/beam
! Combined flux in latest and established models = 0.359738 Jy
! Performing phase self-cal
! Adding 54 model components to the UV plane model.
! The established model now contains 94 components and 0.359738 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.093218Jy  sigma=0.178480
! Fit after  self-cal, rms=0.093148Jy  sigma=0.178233
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.093148Jy  sigma=0.178233
! Fit after  self-cal, rms=0.093151Jy  sigma=0.178119
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.039 mas, bmaj=10.77 mas, bpa=6.216 degrees
! Estimated noise=3.9158 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00306056 Jy
! Component: 100  -  total flux cleaned = 0.00438148 Jy
! Component: 150  -  total flux cleaned = 0.00561073 Jy
! Component: 200  -  total flux cleaned = 0.00659514 Jy
! Total flux subtracted in 200 components = 0.00659514 Jy
! Clean residual min=-0.004592 max=0.003970 Jy/beam
! Clean residual mean=-0.000004 rms=0.001135 Jy/beam
! Combined flux in latest and established models = 0.366333 Jy
selfcal
! Performing phase self-cal
! Adding 55 model components to the UV plane model.
! The established model now contains 141 components and 0.366333 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.092868Jy  sigma=0.177431
! Fit after  self-cal, rms=0.092859Jy  sigma=0.177408
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0013982 Jy
! Component: 100  -  total flux cleaned = 0.00232136 Jy
! Component: 150  -  total flux cleaned = 0.00299765 Jy
! Component: 200  -  total flux cleaned = 0.00340954 Jy
! Total flux subtracted in 200 components = 0.00340954 Jy
! Clean residual min=-0.004184 max=0.003944 Jy/beam
! Clean residual mean=-0.000003 rms=0.001069 Jy/beam
! Combined flux in latest and established models = 0.369743 Jy
! Performing phase self-cal
! Adding 46 model components to the UV plane model.
! The established model now contains 171 components and 0.369743 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.092739Jy  sigma=0.177151
! Fit after  self-cal, rms=0.092730Jy  sigma=0.177139
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.092730Jy  sigma=0.177139
! Fit after  self-cal, rms=0.092741Jy  sigma=0.177122
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.038 mas, bmaj=10.77 mas, bpa=6.226 degrees
! Estimated noise=3.91366 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00105021 Jy
! Component: 100  -  total flux cleaned = 0.00169736 Jy
! Component: 150  -  total flux cleaned = 0.00222263 Jy
! Component: 200  -  total flux cleaned = 0.00232988 Jy
! Total flux subtracted in 200 components = 0.00232988 Jy
! Clean residual min=-0.003796 max=0.003949 Jy/beam
! Clean residual mean=-0.000003 rms=0.001024 Jy/beam
! Combined flux in latest and established models = 0.372073 Jy
selfcal
! Performing phase self-cal
! Adding 41 model components to the UV plane model.
! The established model now contains 196 components and 0.372073 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.092667Jy  sigma=0.176965
! Fit after  self-cal, rms=0.092663Jy  sigma=0.176957
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000762616 Jy
! Component: 100  -  total flux cleaned = 0.00101759 Jy
! Component: 150  -  total flux cleaned = 0.00116097 Jy
! Component: 200  -  total flux cleaned = 0.00129929 Jy
! Total flux subtracted in 200 components = 0.00129929 Jy
! Clean residual min=-0.003691 max=0.003909 Jy/beam
! Clean residual mean=-0.000002 rms=0.000997 Jy/beam
! Combined flux in latest and established models = 0.373372 Jy
! Performing phase self-cal
! Adding 46 model components to the UV plane model.
! The established model now contains 217 components and 0.373372 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.092616Jy  sigma=0.176860
! Fit after  self-cal, rms=0.092613Jy  sigma=0.176856
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.092613Jy  sigma=0.176856
! Fit after  self-cal, rms=0.092571Jy  sigma=0.176848
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.347 mas, bmaj=12.32 mas, bpa=6.413 degrees
! Estimated noise=4.79801 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00270844 Jy
! Component: 100  -  total flux cleaned = 0.00375258 Jy
! Component: 150  -  total flux cleaned = 0.00396873 Jy
! Component: 200  -  total flux cleaned = 0.00397149 Jy
! Total flux subtracted in 200 components = 0.00397149 Jy
! Clean residual min=-0.005347 max=0.005185 Jy/beam
! Clean residual mean=-0.000004 rms=0.001497 Jy/beam
! Combined flux in latest and established models = 0.377343 Jy
selfcal
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 234 components and 0.377343 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.092558Jy  sigma=0.176816
! Fit after  self-cal, rms=0.092559Jy  sigma=0.176808
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00051931 Jy
! Component: 100  -  total flux cleaned = 0.00047954 Jy
! Component: 150  -  total flux cleaned = 0.000480679 Jy
! Component: 200  -  total flux cleaned = 0.000516191 Jy
! Total flux subtracted in 200 components = 0.000516191 Jy
! Clean residual min=-0.005124 max=0.004947 Jy/beam
! Clean residual mean=-0.000004 rms=0.001467 Jy/beam
! Combined flux in latest and established models = 0.37786 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 249 components and 0.37786 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.092554Jy  sigma=0.176793
! Fit after  self-cal, rms=0.092555Jy  sigma=0.176791
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.036 mas, bmaj=10.77 mas, bpa=6.244 degrees
! Estimated noise=3.91186 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.036 x 10.77 at 6.244 degrees (North through East)
! Clean map  min=-0.0049484  max=0.21836 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.25 mas, bmaj=10.1 mas, bpa=7.853 degrees
! Estimated noise=8.01949 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.154905 Jy
! Component: 100  -  total flux cleaned = 0.209742 Jy
! Component: 150  -  total flux cleaned = 0.241987 Jy
! Component: 200  -  total flux cleaned = 0.264408 Jy
! Total flux subtracted in 200 components = 0.264408 Jy
! Clean residual min=-0.012565 max=0.012792 Jy/beam
! Clean residual mean=-0.000011 rms=0.003095 Jy/beam
! Combined flux in latest and established models = 0.264408 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 17 model components to the UV plane model.
! The established model now contains 17 components and 0.264408 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.036 mas, bmaj=10.77 mas, bpa=6.244 degrees
! Estimated noise=3.91186 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0307198 Jy
! Component: 100  -  total flux cleaned = 0.0488563 Jy
! Component: 150  -  total flux cleaned = 0.0617794 Jy
! Component: 200  -  total flux cleaned = 0.0718018 Jy
! Total flux subtracted in 200 components = 0.0718018 Jy
! Clean residual min=-0.005793 max=0.006996 Jy/beam
! Clean residual mean=-0.000015 rms=0.001958 Jy/beam
! Combined flux in latest and established models = 0.336209 Jy
! Adding 48 model components to the UV plane model.
! The established model now contains 60 components and 0.33621 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.347 mas, bmaj=12.32 mas, bpa=6.413 degrees
! Estimated noise=4.79801 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0143617 Jy
! Component: 100  -  total flux cleaned = 0.0237379 Jy
! Component: 150  -  total flux cleaned = 0.0302787 Jy
! Component: 200  -  total flux cleaned = 0.032861 Jy
! Total flux subtracted in 200 components = 0.032861 Jy
! Clean residual min=-0.006552 max=0.005440 Jy/beam
! Clean residual mean=-0.000010 rms=0.001863 Jy/beam
! Combined flux in latest and established models = 0.369071 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00209719 Jy
! Component: 100  -  total flux cleaned = 0.00342231 Jy
! Component: 150  -  total flux cleaned = 0.00443038 Jy
! Component: 200  -  total flux cleaned = 0.00546518 Jy
! Total flux subtracted in 200 components = 0.00546518 Jy
! Clean residual min=-0.005706 max=0.005011 Jy/beam
! Clean residual mean=-0.000007 rms=0.001566 Jy/beam
! Combined flux in latest and established models = 0.374536 Jy
! Adding 106 model components to the UV plane model.
! The established model now contains 157 components and 0.374536 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.036 mas, bmaj=10.77 mas, bpa=6.244 degrees
! Estimated noise=3.91186 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00092038 Jy
! Component: 100  -  total flux cleaned = -0.00023295 Jy
! Component: 150  -  total flux cleaned = 0.00036828 Jy
! Component: 200  -  total flux cleaned = 0.000640682 Jy
! Total flux subtracted in 200 components = 0.000640682 Jy
! Clean residual min=-0.003541 max=0.003494 Jy/beam
! Clean residual mean=-0.000002 rms=0.000964 Jy/beam
! Combined flux in latest and established models = 0.375176 Jy
selfcal
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 193 components and 0.375177 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.092565Jy  sigma=0.176839
! Fit after  self-cal, rms=0.092541Jy  sigma=0.176787
wmodel /g0/scr/pima/npcsb_uvs/J1010+8250_S_map.mod
! Writing 193 model components to file: /g0/scr/pima/npcsb_uvs/J1010+8250_S_map.mod
wobs /g0/scr/pima/npcsb_uvs/J1010+8250_S_uvs.fits
! Writing UV FITS file: /g0/scr/pima/npcsb_uvs/J1010+8250_S_uvs.fits
wwins /g0/scr/pima/npcsb_uvs/J1010+8250_S_map.win
! wwins: Wrote 3 windows to /g0/scr/pima/npcsb_uvs/J1010+8250_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000674995 Jy
! Component: 100  -  total flux cleaned = -0.000733935 Jy
! Component: 150  -  total flux cleaned = -0.000791114 Jy
! Component: 200  -  total flux cleaned = -0.000626051 Jy
! Component: 250  -  total flux cleaned = -0.000677285 Jy
! Component: 300  -  total flux cleaned = -0.000776983 Jy
! Component: 350  -  total flux cleaned = -0.000779845 Jy
! Component: 400  -  total flux cleaned = -0.000828581 Jy
! Component: 450  -  total flux cleaned = -0.000873528 Jy
! Component: 500  -  total flux cleaned = -0.000873401 Jy
! Component: 550  -  total flux cleaned = -0.00078918 Jy
! Component: 600  -  total flux cleaned = -0.000789584 Jy
! Component: 650  -  total flux cleaned = -0.000790366 Jy
! Component: 700  -  total flux cleaned = -0.000789952 Jy
! Component: 750  -  total flux cleaned = -0.000675758 Jy
! Component: 800  -  total flux cleaned = -0.000677224 Jy
! Component: 850  -  total flux cleaned = -0.000788005 Jy
! Component: 900  -  total flux cleaned = -0.000825281 Jy
! Component: 950  -  total flux cleaned = -0.00100174 Jy
! Component: 1000  -  total flux cleaned = -0.00110561 Jy
! Component: 1050  -  total flux cleaned = -0.00124129 Jy
! Component: 1100  -  total flux cleaned = -0.00134153 Jy
! Component: 1150  -  total flux cleaned = -0.00144012 Jy
! Component: 1200  -  total flux cleaned = -0.00137646 Jy
! Component: 1250  -  total flux cleaned = -0.00140917 Jy
! Component: 1300  -  total flux cleaned = -0.00150293 Jy
! Component: 1350  -  total flux cleaned = -0.00147193 Jy
! Component: 1400  -  total flux cleaned = -0.00138055 Jy
! Component: 1450  -  total flux cleaned = -0.00129069 Jy
! Component: 1500  -  total flux cleaned = -0.00135015 Jy
! Component: 1550  -  total flux cleaned = -0.00126197 Jy
! Component: 1600  -  total flux cleaned = -0.00111795 Jy
! Component: 1650  -  total flux cleaned = -0.00100466 Jy
! Component: 1700  -  total flux cleaned = -0.000975965 Jy
! Component: 1750  -  total flux cleaned = -0.000837127 Jy
! Component: 1800  -  total flux cleaned = -0.000700111 Jy
! Component: 1850  -  total flux cleaned = -0.000673229 Jy
! Component: 1900  -  total flux cleaned = -0.000619574 Jy
! Component: 1950  -  total flux cleaned = -0.000486271 Jy
! Component: 2000  -  total flux cleaned = -0.000380959 Jy
! Component: 2050  -  total flux cleaned = -0.000303083 Jy
! Component: 2100  -  total flux cleaned = -9.69952e-05 Jy
! Component: 2150  -  total flux cleaned = -7.13728e-05 Jy
! Component: 2200  -  total flux cleaned = 4.37287e-06 Jy
! Component: 2250  -  total flux cleaned = 0.000129488 Jy
! Component: 2300  -  total flux cleaned = 0.000154265 Jy
! Component: 2350  -  total flux cleaned = 0.000154251 Jy
! Component: 2400  -  total flux cleaned = 0.000129904 Jy
! Component: 2450  -  total flux cleaned = 0.000178277 Jy
! Component: 2500  -  total flux cleaned = 0.000202033 Jy
! Component: 2550  -  total flux cleaned = 0.000155126 Jy
! Component: 2600  -  total flux cleaned = 0.000249453 Jy
! Component: 2650  -  total flux cleaned = 0.000319391 Jy
! Component: 2700  -  total flux cleaned = 0.000180755 Jy
! Component: 2750  -  total flux cleaned = 0.000318575 Jy
! Component: 2800  -  total flux cleaned = 0.000341335 Jy
! Component: 2850  -  total flux cleaned = 0.000340936 Jy
! Component: 2900  -  total flux cleaned = 0.000385807 Jy
! Component: 2950  -  total flux cleaned = 0.000452391 Jy
! Component: 3000  -  total flux cleaned = 0.00036405 Jy
! Component: 3050  -  total flux cleaned = 0.000385922 Jy
! Component: 3100  -  total flux cleaned = 0.000407465 Jy
! Component: 3150  -  total flux cleaned = 0.000407554 Jy
! Component: 3200  -  total flux cleaned = 0.000364686 Jy
! Component: 3250  -  total flux cleaned = 0.000428137 Jy
! Component: 3300  -  total flux cleaned = 0.000407275 Jy
! Component: 3350  -  total flux cleaned = 0.00042799 Jy
! Component: 3400  -  total flux cleaned = 0.000511272 Jy
! Component: 3450  -  total flux cleaned = 0.000511066 Jy
! Component: 3500  -  total flux cleaned = 0.000531635 Jy
! Component: 3550  -  total flux cleaned = 0.000592721 Jy
! Component: 3600  -  total flux cleaned = 0.000592245 Jy
! Component: 3650  -  total flux cleaned = 0.000531608 Jy
! Component: 3700  -  total flux cleaned = 0.00051152 Jy
! Component: 3750  -  total flux cleaned = 0.000551227 Jy
! Component: 3800  -  total flux cleaned = 0.000492052 Jy
! Component: 3850  -  total flux cleaned = 0.000511794 Jy
! Component: 3900  -  total flux cleaned = 0.000550414 Jy
! Component: 3950  -  total flux cleaned = 0.000434567 Jy
! Component: 4000  -  total flux cleaned = 0.000377059 Jy
! Component: 4050  -  total flux cleaned = 0.000338938 Jy
! Total flux subtracted in 4096 components = 0.00032016 Jy
! Clean residual min=-0.001244 max=0.001218 Jy/beam
! Clean residual mean=0.000000 rms=0.000355 Jy/beam
! Combined flux in latest and established models = 0.375497 Jy
keep
! Adding 309 model components to the UV plane model.
! The established model now contains 502 components and 0.375496 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/g0/scr/pima/npcsb_uvs/J1010+8250_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.036 x 10.77 at 6.244 degrees (North through East)
! Clean map  min=-0.0023546  max=0.21637 Jy/beam
! Writing clean map to FITS file: /g0/scr/pima/npcsb_uvs/J1010+8250_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.216369 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000348903 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.483762 0.483762 0.967524 1.93505 3.87009 7.74019 15.4804 30.9608 61.9215
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.001 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.216 
quit
! Quitting program
! Log file /g0/scr/pima/npcsb_uvs/J1010+8250_S_uvs.log closed on Wed Sep 25 00:10:35 2013