! Started logfile: /g0/scr/pima/npcsb_uvs/J0932+7906_X_uvs.log on Wed Sep 25 00:04:50 2013 obs /g0/scr/pima/npcsb_uvs/J0932+7906_X_uva.fits ! Reading UV FITS file: /g0/scr/pima/npcsb_uvs/J0932+7906_X_uva.fits ! AN table 1: 46 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.396135 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0932+7906 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40993e+09 8e+06 1 8e+06 ! 02 2 8.47993e+09 8e+06 1 8e+06 ! 03 3 8.79493e+09 8e+06 1 8e+06 ! 04 4 8.89993e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 2624 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsb_uvs/J0932+7906_X] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 103 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 103 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 103 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 103 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.994478Jy sigma=2.430733 ! Fit after self-cal, rms=0.946504Jy sigma=2.326937 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.297 mas, bmaj=3.159 mas, bpa=-7.546 degrees ! Estimated noise=14.6943 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0472379 Jy ! Component: 100 - total flux cleaned = 0.0548525 Jy ! Total flux subtracted in 100 components = 0.0548525 Jy ! Clean residual min=-0.006891 max=0.006653 Jy/beam ! Clean residual mean=-0.000000 rms=0.002010 Jy/beam ! Combined flux in latest and established models = 0.0548525 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 0.0548525 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064943Jy sigma=0.153465 ! Fit after self-cal, rms=0.063561Jy sigma=0.150110 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.808 mas, bmaj=3.466 mas, bpa=0.3901 degrees ! Estimated noise=6.14874 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00123509 Jy ! Component: 100 - total flux cleaned = -0.00157508 Jy ! Component: 150 - total flux cleaned = -0.00185464 Jy ! Component: 200 - total flux cleaned = -0.00208573 Jy ! Total flux subtracted in 200 components = -0.00208573 Jy ! Clean residual min=-0.003406 max=0.003387 Jy/beam ! Clean residual mean=0.000011 rms=0.000980 Jy/beam ! Combined flux in latest and established models = 0.0527667 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 14 components and 0.0527667 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063427Jy sigma=0.149861 ! Fit after self-cal, rms=0.063367Jy sigma=0.149842 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.97 HN 0.87 KP 0.93 ! LA 1.10 MK 1.00* NL 1.00* OV 1.01 ! PT 1.10 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 1.02 HN 0.91 KP 0.92 ! LA 0.94 MK 1.00* NL 1.00* OV 0.93 ! PT 1.09 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.87 FD 1.04 HN 0.99 KP 0.83 ! LA 1.04 MK 1.00* NL 1.00* OV 0.95 ! PT 0.98 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.84 FD 0.93 HN 0.80 KP 0.89 ! LA 1.04 MK 1.00* NL 1.00* OV 0.95 ! PT 1.14 ! ! ! Fit before self-cal, rms=0.063367Jy sigma=0.149842 ! Fit after self-cal, rms=0.060868Jy sigma=0.149027 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.746 mas, bmaj=3.47 mas, bpa=0.06422 degrees ! Estimated noise=6.00261 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000863542 Jy ! Component: 100 - total flux cleaned = -0.000920426 Jy ! Component: 150 - total flux cleaned = -0.00091975 Jy ! Component: 200 - total flux cleaned = -0.000946519 Jy ! Total flux subtracted in 200 components = -0.000946519 Jy ! Clean residual min=-0.002449 max=0.002493 Jy/beam ! Clean residual mean=-0.000003 rms=0.000662 Jy/beam ! Combined flux in latest and established models = 0.0518202 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 24 components and 0.0518202 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060846Jy sigma=0.149010 ! Fit after self-cal, rms=0.060742Jy sigma=0.148729 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060742Jy sigma=0.148729 ! Fit after self-cal, rms=0.060274Jy sigma=0.148660 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.736 mas, bmaj=3.482 mas, bpa=0.2052 degrees ! Estimated noise=5.9343 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000611631 Jy ! Component: 100 - total flux cleaned = -0.000644803 Jy ! Component: 150 - total flux cleaned = -0.000687619 Jy ! Component: 200 - total flux cleaned = -0.000724336 Jy ! Total flux subtracted in 200 components = -0.000724336 Jy ! Clean residual min=-0.002360 max=0.002533 Jy/beam ! Clean residual mean=-0.000004 rms=0.000678 Jy/beam ! Combined flux in latest and established models = 0.0510959 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 28 components and 0.0510959 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060255Jy sigma=0.148654 ! Fit after self-cal, rms=0.060218Jy sigma=0.148548 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000211207 Jy ! Component: 100 - total flux cleaned = -0.000210506 Jy ! Component: 150 - total flux cleaned = -0.000220215 Jy ! Component: 200 - total flux cleaned = -0.000258055 Jy ! Total flux subtracted in 200 components = -0.000258055 Jy ! Clean residual min=-0.002145 max=0.002460 Jy/beam ! Clean residual mean=-0.000003 rms=0.000622 Jy/beam ! Combined flux in latest and established models = 0.0508378 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 34 components and 0.0508378 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060210Jy sigma=0.148535 ! Fit after self-cal, rms=0.060210Jy sigma=0.148529 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060210Jy sigma=0.148529 ! Fit after self-cal, rms=0.059641Jy sigma=0.148510 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.732 mas, bmaj=3.486 mas, bpa=0.2231 degrees ! Estimated noise=5.86883 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00054871 Jy ! Component: 100 - total flux cleaned = -0.000613473 Jy ! Component: 150 - total flux cleaned = -0.000652851 Jy ! Component: 200 - total flux cleaned = -0.000685727 Jy ! Total flux subtracted in 200 components = -0.000685727 Jy ! Clean residual min=-0.002134 max=0.002337 Jy/beam ! Clean residual mean=-0.000004 rms=0.000606 Jy/beam ! Combined flux in latest and established models = 0.0501521 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 35 components and 0.0501521 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059624Jy sigma=0.148508 ! Fit after self-cal, rms=0.059626Jy sigma=0.148500 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.08783e-05 Jy ! Component: 100 - total flux cleaned = -9.21357e-05 Jy ! Component: 150 - total flux cleaned = -0.000111491 Jy ! Component: 200 - total flux cleaned = -0.000129249 Jy ! Total flux subtracted in 200 components = -0.000129249 Jy ! Clean residual min=-0.002114 max=0.002361 Jy/beam ! Clean residual mean=-0.000004 rms=0.000603 Jy/beam ! Combined flux in latest and established models = 0.0500228 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 39 components and 0.0500228 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059620Jy sigma=0.148492 ! Fit after self-cal, rms=0.059594Jy sigma=0.148416 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059594Jy sigma=0.148416 ! Fit after self-cal, rms=0.058962Jy sigma=0.148403 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.839 mas, bmaj=5.112 mas, bpa=29.21 degrees ! Estimated noise=6.23275 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000633614 Jy ! Component: 100 - total flux cleaned = -0.00069046 Jy ! Component: 150 - total flux cleaned = -0.000702262 Jy ! Component: 200 - total flux cleaned = -0.000712193 Jy ! Total flux subtracted in 200 components = -0.000712193 Jy ! Clean residual min=-0.002141 max=0.002410 Jy/beam ! Clean residual mean=-0.000005 rms=0.000680 Jy/beam ! Combined flux in latest and established models = 0.0493106 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 39 components and 0.0493106 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058948Jy sigma=0.148403 ! Fit after self-cal, rms=0.058948Jy sigma=0.148399 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.03397e-05 Jy ! Component: 100 - total flux cleaned = -3.99117e-05 Jy ! Component: 150 - total flux cleaned = -4.0356e-05 Jy ! Component: 200 - total flux cleaned = -3.27968e-05 Jy ! Total flux subtracted in 200 components = -3.27968e-05 Jy ! Clean residual min=-0.002114 max=0.002394 Jy/beam ! Clean residual mean=-0.000005 rms=0.000674 Jy/beam ! Combined flux in latest and established models = 0.0492778 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 43 components and 0.0492778 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058944Jy sigma=0.148394 ! Fit after self-cal, rms=0.058943Jy sigma=0.148392 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=1.729 mas, bmaj=3.485 mas, bpa=0.2008 degrees ! Estimated noise=5.80137 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.729 x 3.485 at 0.2008 degrees (North through East) ! Clean map min=-0.002505 max=0.054153 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.24 mas, bmaj=3.188 mas, bpa=-6.573 degrees ! Estimated noise=13.5301 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0445556 Jy ! Component: 100 - total flux cleaned = 0.0513897 Jy ! Component: 150 - total flux cleaned = 0.0514372 Jy ! Component: 200 - total flux cleaned = 0.0512639 Jy ! Total flux subtracted in 200 components = 0.0512639 Jy ! Clean residual min=-0.005861 max=0.005923 Jy/beam ! Clean residual mean=-0.000007 rms=0.001458 Jy/beam ! Combined flux in latest and established models = 0.0512639 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.0512639 Jy ! Inverting map and beam ! Estimated beam: bmin=1.729 mas, bmaj=3.485 mas, bpa=0.2008 degrees ! Estimated noise=5.80137 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0013063 Jy ! Component: 100 - total flux cleaned = -0.0014237 Jy ! Component: 150 - total flux cleaned = -0.0014229 Jy ! Component: 200 - total flux cleaned = -0.00142188 Jy ! Total flux subtracted in 200 components = -0.00142188 Jy ! Clean residual min=-0.002376 max=0.002489 Jy/beam ! Clean residual mean=-0.000003 rms=0.000670 Jy/beam ! Combined flux in latest and established models = 0.049842 Jy ! Adding 16 model components to the UV plane model. ! The established model now contains 26 components and 0.049842 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.839 mas, bmaj=5.112 mas, bpa=29.21 degrees ! Estimated noise=6.23275 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.69377e-05 Jy ! Component: 100 - total flux cleaned = -8.12722e-05 Jy ! Component: 150 - total flux cleaned = -0.000111768 Jy ! Component: 200 - total flux cleaned = -0.000139152 Jy ! Total flux subtracted in 200 components = -0.000139152 Jy ! Clean residual min=-0.002288 max=0.002644 Jy/beam ! Clean residual mean=-0.000004 rms=0.000723 Jy/beam ! Combined flux in latest and established models = 0.0497028 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.38099e-05 Jy ! Component: 100 - total flux cleaned = -1.25761e-05 Jy ! Component: 150 - total flux cleaned = -1.59874e-06 Jy ! Component: 200 - total flux cleaned = -1.43526e-06 Jy ! Total flux subtracted in 200 components = -1.43526e-06 Jy ! Clean residual min=-0.002267 max=0.002588 Jy/beam ! Clean residual mean=-0.000004 rms=0.000712 Jy/beam ! Combined flux in latest and established models = 0.0497014 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 45 components and 0.0497014 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.729 mas, bmaj=3.485 mas, bpa=0.2008 degrees ! Estimated noise=5.80137 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.58549e-05 Jy ! Component: 100 - total flux cleaned = -4.90541e-05 Jy ! Component: 150 - total flux cleaned = -4.69474e-05 Jy ! Component: 200 - total flux cleaned = -7.68988e-05 Jy ! Total flux subtracted in 200 components = -7.68988e-05 Jy ! Clean residual min=-0.002305 max=0.002399 Jy/beam ! Clean residual mean=-0.000003 rms=0.000633 Jy/beam ! Combined flux in latest and established models = 0.0496245 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 48 components and 0.0496245 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058948Jy sigma=0.148414 ! Fit after self-cal, rms=0.058944Jy sigma=0.148410 wmodel /g0/scr/pima/npcsb_uvs/J0932+7906_X_map.mod ! Writing 48 model components to file: /g0/scr/pima/npcsb_uvs/J0932+7906_X_map.mod wobs /g0/scr/pima/npcsb_uvs/J0932+7906_X_uvs.fits ! Writing UV FITS file: /g0/scr/pima/npcsb_uvs/J0932+7906_X_uvs.fits wwins /g0/scr/pima/npcsb_uvs/J0932+7906_X_map.win ! wwins: Wrote 1 windows to /g0/scr/pima/npcsb_uvs/J0932+7906_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00021279 Jy ! Component: 100 - total flux cleaned = 0.000323756 Jy ! Component: 150 - total flux cleaned = 0.000224858 Jy ! Component: 200 - total flux cleaned = 1.8099e-06 Jy ! Component: 250 - total flux cleaned = -5.87347e-05 Jy ! Component: 300 - total flux cleaned = -8.80504e-07 Jy ! Component: 350 - total flux cleaned = 2.65939e-05 Jy ! Component: 400 - total flux cleaned = 7.87301e-05 Jy ! Component: 450 - total flux cleaned = 2.86085e-05 Jy ! Component: 500 - total flux cleaned = 2.848e-05 Jy ! Component: 550 - total flux cleaned = 0.000122993 Jy ! Component: 600 - total flux cleaned = 0.000191882 Jy ! Component: 650 - total flux cleaned = 0.00023679 Jy ! Component: 700 - total flux cleaned = 0.000303095 Jy ! Component: 750 - total flux cleaned = 0.000346426 Jy ! Component: 800 - total flux cleaned = 0.000409755 Jy ! Component: 850 - total flux cleaned = 0.00043053 Jy ! Component: 900 - total flux cleaned = 0.000554421 Jy ! Component: 950 - total flux cleaned = 0.000656825 Jy ! Component: 1000 - total flux cleaned = 0.000717923 Jy ! Component: 1050 - total flux cleaned = 0.000798391 Jy ! Component: 1100 - total flux cleaned = 0.000878457 Jy ! Component: 1150 - total flux cleaned = 0.000858587 Jy ! Component: 1200 - total flux cleaned = 0.000937628 Jy ! Component: 1250 - total flux cleaned = 0.000976965 Jy ! Component: 1300 - total flux cleaned = 0.000996424 Jy ! Component: 1350 - total flux cleaned = 0.00103551 Jy ! Component: 1400 - total flux cleaned = 0.00105499 Jy ! Component: 1450 - total flux cleaned = 0.00107441 Jy ! Component: 1500 - total flux cleaned = 0.00115211 Jy ! Component: 1550 - total flux cleaned = 0.00115207 Jy ! Component: 1600 - total flux cleaned = 0.00119082 Jy ! Component: 1650 - total flux cleaned = 0.00121017 Jy ! Component: 1700 - total flux cleaned = 0.00122963 Jy ! Component: 1750 - total flux cleaned = 0.00126868 Jy ! Component: 1800 - total flux cleaned = 0.00128806 Jy ! Component: 1850 - total flux cleaned = 0.00132719 Jy ! Component: 1900 - total flux cleaned = 0.00138606 Jy ! Component: 1950 - total flux cleaned = 0.00142551 Jy ! Component: 2000 - total flux cleaned = 0.00148492 Jy ! Component: 2050 - total flux cleaned = 0.00150465 Jy ! Component: 2100 - total flux cleaned = 0.00150433 Jy ! Component: 2150 - total flux cleaned = 0.00148414 Jy ! Component: 2200 - total flux cleaned = 0.00150428 Jy ! Component: 2250 - total flux cleaned = 0.00150436 Jy ! Component: 2300 - total flux cleaned = 0.001463 Jy ! Component: 2350 - total flux cleaned = 0.00146306 Jy ! Component: 2400 - total flux cleaned = 0.00144219 Jy ! Component: 2450 - total flux cleaned = 0.00142117 Jy ! Component: 2500 - total flux cleaned = 0.00142107 Jy ! Component: 2550 - total flux cleaned = 0.00139951 Jy ! Component: 2600 - total flux cleaned = 0.00139957 Jy ! Component: 2650 - total flux cleaned = 0.00135542 Jy ! Component: 2700 - total flux cleaned = 0.00133297 Jy ! Component: 2750 - total flux cleaned = 0.00131035 Jy ! Component: 2800 - total flux cleaned = 0.00124158 Jy ! Component: 2850 - total flux cleaned = 0.00121813 Jy ! Component: 2900 - total flux cleaned = 0.00119476 Jy ! Component: 2950 - total flux cleaned = 0.00117081 Jy ! Component: 3000 - total flux cleaned = 0.00117088 Jy ! Component: 3050 - total flux cleaned = 0.00119556 Jy ! Component: 3100 - total flux cleaned = 0.00117046 Jy ! Component: 3150 - total flux cleaned = 0.00114473 Jy ! Component: 3200 - total flux cleaned = 0.00119675 Jy ! Component: 3250 - total flux cleaned = 0.00119723 Jy ! Component: 3300 - total flux cleaned = 0.00119713 Jy ! Component: 3350 - total flux cleaned = 0.00119708 Jy ! Component: 3400 - total flux cleaned = 0.00119696 Jy ! Component: 3450 - total flux cleaned = 0.00119678 Jy ! Component: 3500 - total flux cleaned = 0.0012252 Jy ! Component: 3550 - total flux cleaned = 0.00125451 Jy ! Component: 3600 - total flux cleaned = 0.00122477 Jy ! Component: 3650 - total flux cleaned = 0.00122472 Jy ! Component: 3700 - total flux cleaned = 0.00122478 Jy ! Component: 3750 - total flux cleaned = 0.00122488 Jy ! Component: 3800 - total flux cleaned = 0.00119313 Jy ! Component: 3850 - total flux cleaned = 0.00116064 Jy ! Component: 3900 - total flux cleaned = 0.00116092 Jy ! Component: 3950 - total flux cleaned = 0.00112701 Jy ! Component: 4000 - total flux cleaned = 0.00112705 Jy ! Component: 4050 - total flux cleaned = 0.00109109 Jy ! Total flux subtracted in 4096 components = 0.0010909 Jy ! Clean residual min=-0.002484 max=0.002204 Jy/beam ! Clean residual mean=0.000015 rms=0.000546 Jy/beam ! Combined flux in latest and established models = 0.0507154 Jy keep ! Adding 185 model components to the UV plane model. ! The established model now contains 233 components and 0.0507154 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/g0/scr/pima/npcsb_uvs/J0932+7906_X\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.729 x 3.485 at 0.2008 degrees (North through East) ! Clean map min=-0.0049507 max=0.053845 Jy/beam ! Writing clean map to FITS file: /g0/scr/pima/npcsb_uvs/J0932+7906_X_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0538449 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000436459 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -2.43176 2.43176 4.86351 9.72702 19.454 38.9081 77.8162 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0013 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.053 quit ! Quitting program ! Log file /g0/scr/pima/npcsb_uvs/J0932+7906_X_uvs.log closed on Wed Sep 25 00:04:55 2013