! Started logfile: /g0/scr/pima/npcsb_uvs/J0909+8327_S_uvs.log on Wed Sep 25 00:10:20 2013
obs /g0/scr/pima/npcsb_uvs/J0909+8327_S_uva.fits
! Reading UV FITS file: /g0/scr/pima/npcsb_uvs/J0909+8327_S_uva.fits
! AN table 1: 45 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.8 visibilities/baseline/integration-bin.
! Found source: J0909+8327
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23693e+09        8e+06          1        8e+06
!  02        2  2.26693e+09        8e+06          1        8e+06
!  03        3  2.35693e+09        8e+06          1        8e+06
!  04        4  2.37693e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 6480 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsb_uvs/J0909+8327_S]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=1.010397Jy  sigma=2.123716
! Fit after  self-cal, rms=0.894786Jy  sigma=1.870035
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.144 mas, bmaj=10.19 mas, bpa=12.05 degrees
! Estimated noise=9.01423 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0703998 Jy
! Component: 100  -  total flux cleaned = 0.0939641 Jy
! Total flux subtracted in 100 components = 0.0939641 Jy
! Clean residual min=-0.009726 max=0.013632 Jy/beam
! Clean residual mean=-0.000021 rms=0.002858 Jy/beam
! Combined flux in latest and established models = 0.0939641 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 15 components and 0.0939641 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.105227Jy  sigma=0.201583
! Fit after  self-cal, rms=0.104765Jy  sigma=0.200959
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.166 mas, bmaj=10.45 mas, bpa=12.07 degrees
! Estimated noise=4.30106 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0282578 Jy
! Component: 100  -  total flux cleaned = 0.0445867 Jy
! Component: 150  -  total flux cleaned = 0.0554382 Jy
! Component: 200  -  total flux cleaned = 0.0628802 Jy
! Total flux subtracted in 200 components = 0.0628802 Jy
! Clean residual min=-0.007343 max=0.012076 Jy/beam
! Clean residual mean=-0.000042 rms=0.002446 Jy/beam
! Combined flux in latest and established models = 0.156844 Jy
! Performing phase self-cal
! Adding 62 model components to the UV plane model.
! The established model now contains 70 components and 0.156844 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.095858Jy  sigma=0.182593
! Fit after  self-cal, rms=0.095387Jy  sigma=0.182113
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.89     FD        0.92     HN        1.02     KP        0.85     
!   LA        0.98     MK        0.89     NL        1.25     OV        1.07     
!   PT        0.94     SC        1.09     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.96     HN        1.02     KP        0.88     
!   LA        0.95     MK        0.97     NL        1.30     OV        1.07     
!   PT        0.95     SC        1.11     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00     HN        1.01     KP        0.92     
!   LA        0.77     MK        1.04     NL        1.43     OV        1.03     
!   PT        1.03     SC        1.18     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.98     HN        1.06     KP        0.82     
!   LA        0.67     MK        1.17     NL        1.28     OV        0.91     
!   PT        0.88     SC        1.00     
! 
! 
! Fit before self-cal, rms=0.095387Jy  sigma=0.182113
! Fit after  self-cal, rms=0.091274Jy  sigma=0.175793
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.28 mas, bmaj=10.37 mas, bpa=12.51 degrees
! Estimated noise=4.22452 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00169055 Jy
! Component: 100  -  total flux cleaned = 0.00213938 Jy
! Component: 150  -  total flux cleaned = 0.00242894 Jy
! Component: 200  -  total flux cleaned = 0.00255421 Jy
! Total flux subtracted in 200 components = 0.00255421 Jy
! Clean residual min=-0.003950 max=0.004868 Jy/beam
! Clean residual mean=-0.000012 rms=0.001192 Jy/beam
! Combined flux in latest and established models = 0.159399 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 79 components and 0.159399 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.091119Jy  sigma=0.175470
! Fit after  self-cal, rms=0.091220Jy  sigma=0.175203
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.091220Jy  sigma=0.175203
! Fit after  self-cal, rms=0.091032Jy  sigma=0.175125
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.265 mas, bmaj=10.37 mas, bpa=12.73 degrees
! Estimated noise=4.19797 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00120091 Jy
! Component: 100  -  total flux cleaned = 0.00165558 Jy
! Component: 150  -  total flux cleaned = 0.00184187 Jy
! Component: 200  -  total flux cleaned = 0.00189817 Jy
! Total flux subtracted in 200 components = 0.00189817 Jy
! Clean residual min=-0.003971 max=0.004385 Jy/beam
! Clean residual mean=-0.000011 rms=0.001092 Jy/beam
! Combined flux in latest and established models = 0.161297 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 83 components and 0.161297 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.090922Jy  sigma=0.174893
! Fit after  self-cal, rms=0.090911Jy  sigma=0.174870
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000214414 Jy
! Component: 100  -  total flux cleaned = 0.000275587 Jy
! Component: 150  -  total flux cleaned = 0.000277172 Jy
! Component: 200  -  total flux cleaned = 0.00027966 Jy
! Total flux subtracted in 200 components = 0.00027966 Jy
! Clean residual min=-0.003925 max=0.004229 Jy/beam
! Clean residual mean=-0.000011 rms=0.001070 Jy/beam
! Combined flux in latest and established models = 0.161576 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 86 components and 0.161576 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.090847Jy  sigma=0.174740
! Fit after  self-cal, rms=0.090785Jy  sigma=0.174723
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.090785Jy  sigma=0.174723
! Fit after  self-cal, rms=0.090132Jy  sigma=0.174666
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.249 mas, bmaj=10.36 mas, bpa=12.89 degrees
! Estimated noise=4.15959 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000592207 Jy
! Component: 100  -  total flux cleaned = 0.000956159 Jy
! Component: 150  -  total flux cleaned = 0.00110714 Jy
! Component: 200  -  total flux cleaned = 0.00119885 Jy
! Total flux subtracted in 200 components = 0.00119885 Jy
! Clean residual min=-0.004015 max=0.003941 Jy/beam
! Clean residual mean=-0.000011 rms=0.001003 Jy/beam
! Combined flux in latest and established models = 0.162775 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 91 components and 0.162775 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.090060Jy  sigma=0.174512
! Fit after  self-cal, rms=0.090046Jy  sigma=0.174497
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000180821 Jy
! Component: 100  -  total flux cleaned = 0.000270635 Jy
! Component: 150  -  total flux cleaned = 0.00035906 Jy
! Component: 200  -  total flux cleaned = 0.000401464 Jy
! Total flux subtracted in 200 components = 0.000401464 Jy
! Clean residual min=-0.003977 max=0.003800 Jy/beam
! Clean residual mean=-0.000010 rms=0.000989 Jy/beam
! Combined flux in latest and established models = 0.163177 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 95 components and 0.163177 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.090002Jy  sigma=0.174403
! Fit after  self-cal, rms=0.089983Jy  sigma=0.174391
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.089983Jy  sigma=0.174391
! Fit after  self-cal, rms=0.089331Jy  sigma=0.174359
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.516 mas, bmaj=12.16 mas, bpa=14.89 degrees
! Estimated noise=4.75944 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00107696 Jy
! Component: 100  -  total flux cleaned = 0.00108319 Jy
! Component: 150  -  total flux cleaned = 0.00108668 Jy
! Component: 200  -  total flux cleaned = 0.00108361 Jy
! Total flux subtracted in 200 components = 0.00108361 Jy
! Clean residual min=-0.003784 max=0.003511 Jy/beam
! Clean residual mean=-0.000018 rms=0.001048 Jy/beam
! Combined flux in latest and established models = 0.16426 Jy
selfcal
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 97 components and 0.16426 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.089325Jy  sigma=0.174310
! Fit after  self-cal, rms=0.089322Jy  sigma=0.174291
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.75968e-05 Jy
! Component: 100  -  total flux cleaned = -1.89552e-05 Jy
! Component: 150  -  total flux cleaned = -1.82523e-05 Jy
! Component: 200  -  total flux cleaned = 1.0805e-05 Jy
! Total flux subtracted in 200 components = 1.0805e-05 Jy
! Clean residual min=-0.003859 max=0.003361 Jy/beam
! Clean residual mean=-0.000018 rms=0.001028 Jy/beam
! Combined flux in latest and established models = 0.164271 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 97 components and 0.164271 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.089308Jy  sigma=0.174254
! Fit after  self-cal, rms=0.089250Jy  sigma=0.174241
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.235 mas, bmaj=10.35 mas, bpa=13 degrees
! Estimated noise=4.12276 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.235 x 10.35 at 13 degrees (North through East)
! Clean map  min=-0.0038392  max=0.086921 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.176 mas, bmaj=9.981 mas, bpa=12.56 degrees
! Estimated noise=8.75859 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0683543 Jy
! Component: 100  -  total flux cleaned = 0.0944086 Jy
! Component: 150  -  total flux cleaned = 0.110882 Jy
! Component: 200  -  total flux cleaned = 0.122861 Jy
! Total flux subtracted in 200 components = 0.122861 Jy
! Clean residual min=-0.008067 max=0.008234 Jy/beam
! Clean residual mean=-0.000011 rms=0.002037 Jy/beam
! Combined flux in latest and established models = 0.122861 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 28 model components to the UV plane model.
! The established model now contains 28 components and 0.122861 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.235 mas, bmaj=10.35 mas, bpa=13 degrees
! Estimated noise=4.12276 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0152716 Jy
! Component: 100  -  total flux cleaned = 0.0242681 Jy
! Component: 150  -  total flux cleaned = 0.0300694 Jy
! Component: 200  -  total flux cleaned = 0.0338759 Jy
! Total flux subtracted in 200 components = 0.0338759 Jy
! Clean residual min=-0.003800 max=0.004576 Jy/beam
! Clean residual mean=-0.000018 rms=0.001050 Jy/beam
! Combined flux in latest and established models = 0.156736 Jy
! Adding 62 model components to the UV plane model.
! The established model now contains 80 components and 0.156736 Jy
! Inverting map 
! Added new window around map position (4, -1).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00432374 Jy
! Component: 100  -  total flux cleaned = 0.00607615 Jy
! Component: 150  -  total flux cleaned = 0.00651384 Jy
! Component: 200  -  total flux cleaned = 0.0069618 Jy
! Total flux subtracted in 200 components = 0.0069618 Jy
! Clean residual min=-0.003324 max=0.003775 Jy/beam
! Clean residual mean=-0.000010 rms=0.000860 Jy/beam
! Combined flux in latest and established models = 0.163698 Jy
! Adding 24 model components to the UV plane model.
! The established model now contains 100 components and 0.163698 Jy
! Inverting map 
! Added new window around map position (6, -31).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00308675 Jy
! Component: 100  -  total flux cleaned = 0.0035788 Jy
! Component: 150  -  total flux cleaned = 0.00381935 Jy
! Component: 200  -  total flux cleaned = 0.00403215 Jy
! Total flux subtracted in 200 components = 0.00403215 Jy
! Clean residual min=-0.003062 max=0.002676 Jy/beam
! Clean residual mean=-0.000004 rms=0.000766 Jy/beam
! Combined flux in latest and established models = 0.16773 Jy
! Adding 29 model components to the UV plane model.
! The established model now contains 124 components and 0.16773 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.516 mas, bmaj=12.16 mas, bpa=14.89 degrees
! Estimated noise=4.75944 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000368321 Jy
! Component: 100  -  total flux cleaned = 0.000410227 Jy
! Component: 150  -  total flux cleaned = 0.000444086 Jy
! Component: 200  -  total flux cleaned = 0.000532365 Jy
! Total flux subtracted in 200 components = 0.000532365 Jy
! Clean residual min=-0.003359 max=0.002698 Jy/beam
! Clean residual mean=-0.000006 rms=0.000804 Jy/beam
! Combined flux in latest and established models = 0.168263 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.802e-05 Jy
! Component: 100  -  total flux cleaned = 7.81106e-05 Jy
! Component: 150  -  total flux cleaned = 0.00014665 Jy
! Component: 200  -  total flux cleaned = 0.000168517 Jy
! Total flux subtracted in 200 components = 0.000168517 Jy
! Clean residual min=-0.003251 max=0.002572 Jy/beam
! Clean residual mean=-0.000006 rms=0.000786 Jy/beam
! Combined flux in latest and established models = 0.168431 Jy
! Adding 32 model components to the UV plane model.
! The established model now contains 155 components and 0.168431 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.235 mas, bmaj=10.35 mas, bpa=13 degrees
! Estimated noise=4.12276 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.25057e-05 Jy
! Component: 100  -  total flux cleaned = -5.25405e-05 Jy
! Component: 150  -  total flux cleaned = -8.76956e-05 Jy
! Component: 200  -  total flux cleaned = -0.000118294 Jy
! Total flux subtracted in 200 components = -0.000118294 Jy
! Clean residual min=-0.002863 max=0.002531 Jy/beam
! Clean residual mean=-0.000003 rms=0.000722 Jy/beam
! Combined flux in latest and established models = 0.168313 Jy
selfcal
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 181 components and 0.168313 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.088928Jy  sigma=0.173570
! Fit after  self-cal, rms=0.088949Jy  sigma=0.173470
wmodel /g0/scr/pima/npcsb_uvs/J0909+8327_S_map.mod
! Writing 181 model components to file: /g0/scr/pima/npcsb_uvs/J0909+8327_S_map.mod
wobs /g0/scr/pima/npcsb_uvs/J0909+8327_S_uvs.fits
! Writing UV FITS file: /g0/scr/pima/npcsb_uvs/J0909+8327_S_uvs.fits
wwins /g0/scr/pima/npcsb_uvs/J0909+8327_S_map.win
! wwins: Wrote 3 windows to /g0/scr/pima/npcsb_uvs/J0909+8327_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00103421 Jy
! Component: 100  -  total flux cleaned = -0.00117585 Jy
! Component: 150  -  total flux cleaned = -0.00108772 Jy
! Component: 200  -  total flux cleaned = -0.00117308 Jy
! Component: 250  -  total flux cleaned = -0.00133792 Jy
! Component: 300  -  total flux cleaned = -0.00141897 Jy
! Component: 350  -  total flux cleaned = -0.00157409 Jy
! Component: 400  -  total flux cleaned = -0.00145953 Jy
! Component: 450  -  total flux cleaned = -0.00145929 Jy
! Component: 500  -  total flux cleaned = -0.00145996 Jy
! Component: 550  -  total flux cleaned = -0.00149513 Jy
! Component: 600  -  total flux cleaned = -0.00142605 Jy
! Component: 650  -  total flux cleaned = -0.0014937 Jy
! Component: 700  -  total flux cleaned = -0.00156081 Jy
! Component: 750  -  total flux cleaned = -0.0017893 Jy
! Component: 800  -  total flux cleaned = -0.00191686 Jy
! Component: 850  -  total flux cleaned = -0.00197958 Jy
! Component: 900  -  total flux cleaned = -0.00216627 Jy
! Component: 950  -  total flux cleaned = -0.00253349 Jy
! Component: 1000  -  total flux cleaned = -0.00289562 Jy
! Component: 1050  -  total flux cleaned = -0.00322353 Jy
! Component: 1100  -  total flux cleaned = -0.00354685 Jy
! Component: 1150  -  total flux cleaned = -0.00386661 Jy
! Component: 1200  -  total flux cleaned = -0.00418279 Jy
! Component: 1250  -  total flux cleaned = -0.00449569 Jy
! Component: 1300  -  total flux cleaned = -0.00474817 Jy
! Component: 1350  -  total flux cleaned = -0.00505327 Jy
! Component: 1400  -  total flux cleaned = -0.00532739 Jy
! Component: 1450  -  total flux cleaned = -0.00557128 Jy
! Component: 1500  -  total flux cleaned = -0.00591963 Jy
! Component: 1550  -  total flux cleaned = -0.00618408 Jy
! Component: 1600  -  total flux cleaned = -0.00639375 Jy
! Component: 1650  -  total flux cleaned = -0.00667866 Jy
! Component: 1700  -  total flux cleaned = -0.00688363 Jy
! Component: 1750  -  total flux cleaned = -0.00711213 Jy
! Component: 1800  -  total flux cleaned = -0.0073641 Jy
! Component: 1850  -  total flux cleaned = -0.00753864 Jy
! Component: 1900  -  total flux cleaned = -0.00778594 Jy
! Component: 1950  -  total flux cleaned = -0.00805544 Jy
! Component: 2000  -  total flux cleaned = -0.00829798 Jy
! Component: 2050  -  total flux cleaned = -0.00849063 Jy
! Component: 2100  -  total flux cleaned = -0.00880069 Jy
! Component: 2150  -  total flux cleaned = -0.00901327 Jy
! Component: 2200  -  total flux cleaned = -0.00922439 Jy
! Component: 2250  -  total flux cleaned = -0.00938739 Jy
! Component: 2300  -  total flux cleaned = -0.009618 Jy
! Component: 2350  -  total flux cleaned = -0.00984653 Jy
! Component: 2400  -  total flux cleaned = -0.0101185 Jy
! Component: 2450  -  total flux cleaned = -0.0102761 Jy
! Component: 2500  -  total flux cleaned = -0.0103657 Jy
! Component: 2550  -  total flux cleaned = -0.0105211 Jy
! Component: 2600  -  total flux cleaned = -0.0107852 Jy
! Component: 2650  -  total flux cleaned = -0.0108288 Jy
! Component: 2700  -  total flux cleaned = -0.0109591 Jy
! Component: 2750  -  total flux cleaned = -0.0110671 Jy
! Component: 2800  -  total flux cleaned = -0.0111746 Jy
! Component: 2850  -  total flux cleaned = -0.0112385 Jy
! Component: 2900  -  total flux cleaned = -0.0113448 Jy
! Component: 2950  -  total flux cleaned = -0.011387 Jy
! Component: 3000  -  total flux cleaned = -0.0114293 Jy
! Component: 3050  -  total flux cleaned = -0.0114713 Jy
! Component: 3100  -  total flux cleaned = -0.0115548 Jy
! Component: 3150  -  total flux cleaned = -0.0116378 Jy
! Component: 3200  -  total flux cleaned = -0.0116585 Jy
! Component: 3250  -  total flux cleaned = -0.0116793 Jy
! Component: 3300  -  total flux cleaned = -0.0116999 Jy
! Component: 3350  -  total flux cleaned = -0.0117611 Jy
! Component: 3400  -  total flux cleaned = -0.0118017 Jy
! Component: 3450  -  total flux cleaned = -0.0117611 Jy
! Component: 3500  -  total flux cleaned = -0.0117611 Jy
! Component: 3550  -  total flux cleaned = -0.0117812 Jy
! Component: 3600  -  total flux cleaned = -0.0117212 Jy
! Component: 3650  -  total flux cleaned = -0.0117611 Jy
! Component: 3700  -  total flux cleaned = -0.0117214 Jy
! Component: 3750  -  total flux cleaned = -0.0117413 Jy
! Component: 3800  -  total flux cleaned = -0.0117216 Jy
! Component: 3850  -  total flux cleaned = -0.011623 Jy
! Component: 3900  -  total flux cleaned = -0.0116033 Jy
! Component: 3950  -  total flux cleaned = -0.0115641 Jy
! Component: 4000  -  total flux cleaned = -0.011525 Jy
! Component: 4050  -  total flux cleaned = -0.011525 Jy
! Total flux subtracted in 4096 components = -0.0114862 Jy
! Clean residual min=-0.001156 max=0.001053 Jy/beam
! Clean residual mean=0.000001 rms=0.000344 Jy/beam
! Combined flux in latest and established models = 0.156827 Jy
keep
! Adding 250 model components to the UV plane model.
! The established model now contains 431 components and 0.156827 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/g0/scr/pima/npcsb_uvs/J0909+8327_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.235 x 10.35 at 13 degrees (North through East)
! Clean map  min=-0.0023342  max=0.089197 Jy/beam
! Writing clean map to FITS file: /g0/scr/pima/npcsb_uvs/J0909+8327_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0891965 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000345748 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.16288 1.16288 2.32575 4.65151 9.30301 18.606 37.212 74.4241
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.001 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.089 
quit
! Quitting program
! Log file /g0/scr/pima/npcsb_uvs/J0909+8327_S_uvs.log closed on Wed Sep 25 00:10:25 2013