! Started logfile: /g0/scr/pima/npcsb_uvs/J0819+8105_X_uvs.log on Wed Sep 25 00:04:33 2013 obs /g0/scr/pima/npcsb_uvs/J0819+8105_X_uva.fits ! Reading UV FITS file: /g0/scr/pima/npcsb_uvs/J0819+8105_X_uva.fits ! AN table 1: 46 integrations on 15 of 15 possible baselines. ! AN table 2: 46 integrations on 1 of 1 possible baselines. ! Apparent sampling: 0.875 visibilities/baseline/integration-bin. ! Found source: J0819+8105 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40993e+09 8e+06 1 8e+06 ! 02 2 8.47993e+09 8e+06 1 8e+06 ! 03 3 8.79493e+09 8e+06 1 8e+06 ! 04 4 8.89993e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 2576 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsb_uvs/J0819+8105_X] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 92 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 92 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 92 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 92 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=1.009574Jy sigma=2.443417 ! Fit after self-cal, rms=0.945873Jy sigma=2.324967 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.121 mas, bmaj=6.952 mas, bpa=47.91 degrees ! Estimated noise=14.2459 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0447895 Jy ! Component: 100 - total flux cleaned = 0.056533 Jy ! Total flux subtracted in 100 components = 0.056533 Jy ! Clean residual min=-0.005076 max=0.005193 Jy/beam ! Clean residual mean=0.000002 rms=0.001694 Jy/beam ! Combined flux in latest and established models = 0.056533 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.056533 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065980Jy sigma=0.156442 ! Fit after self-cal, rms=0.064277Jy sigma=0.152231 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.503 mas, bmaj=7.412 mas, bpa=46.22 degrees ! Estimated noise=5.95394 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000729314 Jy ! Component: 100 - total flux cleaned = -0.000832835 Jy ! Component: 150 - total flux cleaned = -0.00154318 Jy ! Component: 200 - total flux cleaned = -0.00175564 Jy ! Total flux subtracted in 200 components = -0.00175564 Jy ! Clean residual min=-0.001550 max=0.001572 Jy/beam ! Clean residual mean=0.000004 rms=0.000626 Jy/beam ! Combined flux in latest and established models = 0.0547773 Jy ! Performing phase self-cal ! Adding 69 model components to the UV plane model. ! The established model now contains 82 components and 0.0547773 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063557Jy sigma=0.150515 ! Fit after self-cal, rms=0.063451Jy sigma=0.150338 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 1.01 KP 1.09 LA 1.04 ! OV 0.95 PT 1.11 ! ! Telescope amplitude corrections in sub-array 2: ! HN 0.00* SC 0.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.03 KP 0.97 LA 0.95 ! OV 0.95 PT 0.96 ! ! Telescope amplitude corrections in sub-array 2: ! HN 0.00* SC 0.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.97 KP 0.87 LA 1.06 ! OV 0.94 PT 0.91 ! ! Telescope amplitude corrections in sub-array 2: ! HN 0.00* SC 0.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.93 KP 0.97 LA 0.98 ! OV 1.06 PT 1.04 ! ! Telescope amplitude corrections in sub-array 2: ! HN 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.063451Jy sigma=0.150338 ! Fit after self-cal, rms=0.061285Jy sigma=0.149764 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.482 mas, bmaj=7.399 mas, bpa=46.45 degrees ! Estimated noise=5.77155 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00175626 Jy ! Component: 100 - total flux cleaned = 0.00222221 Jy ! Component: 150 - total flux cleaned = 0.00261731 Jy ! Component: 200 - total flux cleaned = 0.00301552 Jy ! Total flux subtracted in 200 components = 0.00301552 Jy ! Clean residual min=-0.000895 max=0.000895 Jy/beam ! Clean residual mean=0.000002 rms=0.000317 Jy/beam ! Combined flux in latest and established models = 0.0577928 Jy ! Performing phase self-cal ! Adding 68 model components to the UV plane model. ! The established model now contains 148 components and 0.0577928 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061096Jy sigma=0.149338 ! Fit after self-cal, rms=0.061071Jy sigma=0.149142 ! Inverting map ! Added new window around map position (-17.2, 21.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000455352 Jy ! Component: 100 - total flux cleaned = 0.000424344 Jy ! Component: 150 - total flux cleaned = 0.00031058 Jy ! Component: 200 - total flux cleaned = 0.00022274 Jy ! Total flux subtracted in 200 components = 0.00022274 Jy ! Clean residual min=-0.001001 max=0.001140 Jy/beam ! Clean residual mean=0.000001 rms=0.000295 Jy/beam ! Combined flux in latest and established models = 0.0580156 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 188 components and 0.0580156 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061027Jy sigma=0.149039 ! Fit after self-cal, rms=0.061006Jy sigma=0.149012 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061006Jy sigma=0.149012 ! Fit after self-cal, rms=0.060838Jy sigma=0.148990 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.483 mas, bmaj=7.397 mas, bpa=46.51 degrees ! Estimated noise=5.7439 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000307106 Jy ! Component: 100 - total flux cleaned = 0.000171358 Jy ! Component: 150 - total flux cleaned = 2.63577e-05 Jy ! Component: 200 - total flux cleaned = -0.000113878 Jy ! Total flux subtracted in 200 components = -0.000113878 Jy ! Clean residual min=-0.000956 max=0.001080 Jy/beam ! Clean residual mean=0.000001 rms=0.000283 Jy/beam ! Combined flux in latest and established models = 0.0579017 Jy selfcal ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 217 components and 0.0579017 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060826Jy sigma=0.148965 ! Fit after self-cal, rms=0.060832Jy sigma=0.148955 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.29133e-05 Jy ! Component: 100 - total flux cleaned = -5.03529e-06 Jy ! Component: 150 - total flux cleaned = -6.92193e-05 Jy ! Component: 200 - total flux cleaned = -6.11565e-05 Jy ! Total flux subtracted in 200 components = -6.11565e-05 Jy ! Clean residual min=-0.000962 max=0.001114 Jy/beam ! Clean residual mean=0.000000 rms=0.000284 Jy/beam ! Combined flux in latest and established models = 0.0578405 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 244 components and 0.0578405 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060828Jy sigma=0.148947 ! Fit after self-cal, rms=0.060826Jy sigma=0.148946 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060826Jy sigma=0.148946 ! Fit after self-cal, rms=0.060770Jy sigma=0.148940 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.49 mas, bmaj=7.396 mas, bpa=46.46 degrees ! Estimated noise=5.73131 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00017142 Jy ! Component: 100 - total flux cleaned = -0.000282027 Jy ! Component: 150 - total flux cleaned = -0.000376939 Jy ! Component: 200 - total flux cleaned = -0.000435582 Jy ! Total flux subtracted in 200 components = -0.000435582 Jy ! Clean residual min=-0.000952 max=0.001120 Jy/beam ! Clean residual mean=0.000001 rms=0.000277 Jy/beam ! Combined flux in latest and established models = 0.0574049 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 262 components and 0.0574049 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060766Jy sigma=0.148932 ! Fit after self-cal, rms=0.060770Jy sigma=0.148931 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.73685e-05 Jy ! Component: 100 - total flux cleaned = -5.65127e-05 Jy ! Component: 150 - total flux cleaned = -8.40839e-05 Jy ! Component: 200 - total flux cleaned = -7.09831e-05 Jy ! Total flux subtracted in 200 components = -7.09831e-05 Jy ! Clean residual min=-0.000946 max=0.001135 Jy/beam ! Clean residual mean=0.000001 rms=0.000277 Jy/beam ! Combined flux in latest and established models = 0.0573339 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 278 components and 0.057334 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060768Jy sigma=0.148928 ! Fit after self-cal, rms=0.060766Jy sigma=0.148927 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060766Jy sigma=0.148927 ! Fit after self-cal, rms=0.060634Jy sigma=0.148924 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.824 mas, bmaj=7.652 mas, bpa=43.23 degrees ! Estimated noise=5.81457 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000311285 Jy ! Component: 100 - total flux cleaned = -0.000373128 Jy ! Component: 150 - total flux cleaned = -0.000403788 Jy ! Component: 200 - total flux cleaned = -0.000416895 Jy ! Total flux subtracted in 200 components = -0.000416895 Jy ! Clean residual min=-0.000848 max=0.001004 Jy/beam ! Clean residual mean=0.000001 rms=0.000250 Jy/beam ! Combined flux in latest and established models = 0.0569171 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 296 components and 0.0569171 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060631Jy sigma=0.148919 ! Fit after self-cal, rms=0.060633Jy sigma=0.148919 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.96721e-06 Jy ! Component: 100 - total flux cleaned = 2.52611e-06 Jy ! Component: 150 - total flux cleaned = 2.47665e-05 Jy ! Component: 200 - total flux cleaned = 4.58247e-05 Jy ! Total flux subtracted in 200 components = 4.58247e-05 Jy ! Clean residual min=-0.000871 max=0.001025 Jy/beam ! Clean residual mean=0.000001 rms=0.000247 Jy/beam ! Combined flux in latest and established models = 0.0569629 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 305 components and 0.0569629 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060632Jy sigma=0.148917 ! Fit after self-cal, rms=0.060631Jy sigma=0.148917 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.496 mas, bmaj=7.396 mas, bpa=46.43 degrees ! Estimated noise=5.71356 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.496 x 7.396 at 46.43 degrees (North through East) ! Clean map min=-0.0026365 max=0.049342 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.119 mas, bmaj=6.932 mas, bpa=48.01 degrees ! Estimated noise=13.7528 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0326841 Jy ! Component: 100 - total flux cleaned = 0.0336442 Jy ! Component: 150 - total flux cleaned = 0.033643 Jy ! Component: 200 - total flux cleaned = 0.0328998 Jy ! Total flux subtracted in 200 components = 0.0328998 Jy ! Clean residual min=-0.016660 max=0.027298 Jy/beam ! Clean residual mean=-0.000023 rms=0.005198 Jy/beam ! Combined flux in latest and established models = 0.0328998 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 37 model components to the UV plane model. ! The established model now contains 37 components and 0.0328998 Jy ! Inverting map and beam ! Estimated beam: bmin=2.496 mas, bmaj=7.396 mas, bpa=46.43 degrees ! Estimated noise=5.71356 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1, 0.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0209803 Jy ! Component: 100 - total flux cleaned = 0.0239936 Jy ! Component: 150 - total flux cleaned = 0.025738 Jy ! Component: 200 - total flux cleaned = 0.0263508 Jy ! Total flux subtracted in 200 components = 0.0263508 Jy ! Clean residual min=-0.006748 max=0.007617 Jy/beam ! Clean residual mean=-0.000005 rms=0.001533 Jy/beam ! Combined flux in latest and established models = 0.0592506 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 65 components and 0.0592506 Jy ! Inverting map ! Added new window around map position (51, -32). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00377794 Jy ! Component: 100 - total flux cleaned = 0.00376672 Jy ! Component: 150 - total flux cleaned = 0.00376094 Jy ! Component: 200 - total flux cleaned = 0.00388095 Jy ! Total flux subtracted in 200 components = 0.00388095 Jy ! Clean residual min=-0.004441 max=0.003889 Jy/beam ! Clean residual mean=-0.000001 rms=0.000947 Jy/beam ! Combined flux in latest and established models = 0.0631316 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 93 components and 0.0631316 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.824 mas, bmaj=7.652 mas, bpa=43.23 degrees ! Estimated noise=5.81457 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000907732 Jy ! Component: 100 - total flux cleaned = 0.00148432 Jy ! Component: 150 - total flux cleaned = 0.0019992 Jy ! Component: 200 - total flux cleaned = 0.00213269 Jy ! Total flux subtracted in 200 components = 0.00213269 Jy ! Clean residual min=-0.003380 max=0.002548 Jy/beam ! Clean residual mean=-0.000002 rms=0.000659 Jy/beam ! Combined flux in latest and established models = 0.0652643 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000124141 Jy ! Component: 100 - total flux cleaned = 0.000120671 Jy ! Component: 150 - total flux cleaned = 0.000175405 Jy ! Component: 200 - total flux cleaned = 0.00017665 Jy ! Total flux subtracted in 200 components = 0.00017665 Jy ! Clean residual min=-0.003044 max=0.002285 Jy/beam ! Clean residual mean=-0.000002 rms=0.000567 Jy/beam ! Combined flux in latest and established models = 0.0654409 Jy ! Adding 56 model components to the UV plane model. ! The established model now contains 136 components and 0.0654409 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.496 mas, bmaj=7.396 mas, bpa=46.43 degrees ! Estimated noise=5.71356 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.06119e-06 Jy ! Component: 100 - total flux cleaned = 5.50461e-05 Jy ! Component: 150 - total flux cleaned = 9.33747e-07 Jy ! Component: 200 - total flux cleaned = -5.07037e-05 Jy ! Total flux subtracted in 200 components = -5.07037e-05 Jy ! Clean residual min=-0.003126 max=0.002456 Jy/beam ! Clean residual mean=-0.000002 rms=0.000564 Jy/beam ! Combined flux in latest and established models = 0.0653902 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 158 components and 0.0653902 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061075Jy sigma=0.150123 ! Fit after self-cal, rms=0.060821Jy sigma=0.149496 wmodel /g0/scr/pima/npcsb_uvs/J0819+8105_X_map.mod ! Writing 158 model components to file: /g0/scr/pima/npcsb_uvs/J0819+8105_X_map.mod wobs /g0/scr/pima/npcsb_uvs/J0819+8105_X_uvs.fits ! Writing UV FITS file: /g0/scr/pima/npcsb_uvs/J0819+8105_X_uvs.fits wwins /g0/scr/pima/npcsb_uvs/J0819+8105_X_map.win ! wwins: Wrote 3 windows to /g0/scr/pima/npcsb_uvs/J0819+8105_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000204061 Jy ! Component: 100 - total flux cleaned = 0.000334107 Jy ! Component: 150 - total flux cleaned = 0.000575549 Jy ! Component: 200 - total flux cleaned = 0.000825695 Jy ! Component: 250 - total flux cleaned = 0.00102136 Jy ! Component: 300 - total flux cleaned = 0.00125055 Jy ! Component: 350 - total flux cleaned = 0.00143153 Jy ! Component: 400 - total flux cleaned = 0.00158793 Jy ! Component: 450 - total flux cleaned = 0.00179594 Jy ! Component: 500 - total flux cleaned = 0.00197901 Jy ! Component: 550 - total flux cleaned = 0.00213863 Jy ! Component: 600 - total flux cleaned = 0.00231246 Jy ! Component: 650 - total flux cleaned = 0.00246611 Jy ! Component: 700 - total flux cleaned = 0.00260034 Jy ! Component: 750 - total flux cleaned = 0.00264988 Jy ! Component: 800 - total flux cleaned = 0.00266604 Jy ! Component: 850 - total flux cleaned = 0.00263385 Jy ! Component: 900 - total flux cleaned = 0.00264976 Jy ! Component: 950 - total flux cleaned = 0.00266564 Jy ! Component: 1000 - total flux cleaned = 0.00268143 Jy ! Component: 1050 - total flux cleaned = 0.00274274 Jy ! Component: 1100 - total flux cleaned = 0.00272739 Jy ! Component: 1150 - total flux cleaned = 0.00274237 Jy ! Component: 1200 - total flux cleaned = 0.00275745 Jy ! Component: 1250 - total flux cleaned = 0.00277241 Jy ! Component: 1300 - total flux cleaned = 0.0028162 Jy ! Component: 1350 - total flux cleaned = 0.00283052 Jy ! Component: 1400 - total flux cleaned = 0.00283039 Jy ! Component: 1450 - total flux cleaned = 0.00278755 Jy ! Component: 1500 - total flux cleaned = 0.00278764 Jy ! Component: 1550 - total flux cleaned = 0.00278772 Jy ! Component: 1600 - total flux cleaned = 0.00277362 Jy ! Component: 1650 - total flux cleaned = 0.00277364 Jy ! Component: 1700 - total flux cleaned = 0.00277368 Jy ! Component: 1750 - total flux cleaned = 0.00280119 Jy ! Component: 1800 - total flux cleaned = 0.00277359 Jy ! Component: 1850 - total flux cleaned = 0.0027736 Jy ! Component: 1900 - total flux cleaned = 0.00274621 Jy ! Component: 1950 - total flux cleaned = 0.00274622 Jy ! Component: 2000 - total flux cleaned = 0.00277336 Jy ! Component: 2050 - total flux cleaned = 0.00274633 Jy ! Component: 2100 - total flux cleaned = 0.00271934 Jy ! Component: 2150 - total flux cleaned = 0.00269239 Jy ! Component: 2200 - total flux cleaned = 0.00266549 Jy ! Component: 2250 - total flux cleaned = 0.00265206 Jy ! Component: 2300 - total flux cleaned = 0.00266544 Jy ! Component: 2350 - total flux cleaned = 0.00265215 Jy ! Component: 2400 - total flux cleaned = 0.00267887 Jy ! Component: 2450 - total flux cleaned = 0.00270558 Jy ! Component: 2500 - total flux cleaned = 0.00270555 Jy ! Component: 2550 - total flux cleaned = 0.0027323 Jy ! Component: 2600 - total flux cleaned = 0.00273233 Jy ! Component: 2650 - total flux cleaned = 0.00274585 Jy ! Component: 2700 - total flux cleaned = 0.00274578 Jy ! Component: 2750 - total flux cleaned = 0.00278629 Jy ! Component: 2800 - total flux cleaned = 0.00279996 Jy ! Component: 2850 - total flux cleaned = 0.00281353 Jy ! Component: 2900 - total flux cleaned = 0.00284087 Jy ! Component: 2950 - total flux cleaned = 0.00285457 Jy ! Component: 3000 - total flux cleaned = 0.00286839 Jy ! Component: 3050 - total flux cleaned = 0.00288231 Jy ! Component: 3100 - total flux cleaned = 0.00291013 Jy ! Component: 3150 - total flux cleaned = 0.00292417 Jy ! Component: 3200 - total flux cleaned = 0.00292406 Jy ! Component: 3250 - total flux cleaned = 0.00296646 Jy ! Component: 3300 - total flux cleaned = 0.00298064 Jy ! Component: 3350 - total flux cleaned = 0.00300928 Jy ! Component: 3400 - total flux cleaned = 0.00300925 Jy ! Component: 3450 - total flux cleaned = 0.00302383 Jy ! Component: 3500 - total flux cleaned = 0.00303834 Jy ! Component: 3550 - total flux cleaned = 0.00305285 Jy ! Component: 3600 - total flux cleaned = 0.00305281 Jy ! Component: 3650 - total flux cleaned = 0.0030676 Jy ! Component: 3700 - total flux cleaned = 0.00308246 Jy ! Component: 3750 - total flux cleaned = 0.00309741 Jy ! Component: 3800 - total flux cleaned = 0.00311258 Jy ! Component: 3850 - total flux cleaned = 0.00308226 Jy ! Component: 3900 - total flux cleaned = 0.00311276 Jy ! Component: 3950 - total flux cleaned = 0.00309735 Jy ! Component: 4000 - total flux cleaned = 0.00311283 Jy ! Component: 4050 - total flux cleaned = 0.00312844 Jy ! Total flux subtracted in 4096 components = 0.00312853 Jy ! Clean residual min=-0.000908 max=0.000891 Jy/beam ! Clean residual mean=0.000004 rms=0.000285 Jy/beam ! Combined flux in latest and established models = 0.0685188 Jy keep ! Adding 210 model components to the UV plane model. ! The established model now contains 368 components and 0.0685188 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/g0/scr/pima/npcsb_uvs/J0819+8105_X\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.496 x 7.396 at 46.43 degrees (North through East) ! Clean map min=-0.0098383 max=0.028373 Jy/beam ! Writing clean map to FITS file: /g0/scr/pima/npcsb_uvs/J0819+8105_X_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0283727 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000304596 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -3.22067 3.22067 6.44133 12.8827 25.7653 51.5307 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.028 quit ! Quitting program ! Log file /g0/scr/pima/npcsb_uvs/J0819+8105_X_uvs.log closed on Wed Sep 25 00:04:38 2013