! Started logfile: /g0/scr/pima/npcsb_uvs/J0806+8126_S_uvs.log on Wed Sep 25 00:09:55 2013
obs /g0/scr/pima/npcsb_uvs/J0806+8126_S_uva.fits
! Reading UV FITS file: /g0/scr/pima/npcsb_uvs/J0806+8126_S_uva.fits
! AN table 1: 46 integrations on 15 of 15 possible baselines.
! Apparent sampling: 0.728986 visibilities/baseline/integration-bin.
! Found source: J0806+8126
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23693e+09        8e+06          1        8e+06
!  02        2  2.26693e+09        8e+06          1        8e+06
!  03        3  2.35693e+09        8e+06          1        8e+06
!  04        4  2.37693e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 2012 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsb_uvs/J0806+8126_S]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.031532Jy  sigma=2.337775
! Fit after  self-cal, rms=0.907408Jy  sigma=2.078044
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=9.91 mas, bmaj=24.29 mas, bpa=63.22 degrees
! Estimated noise=11.5531 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0682798 Jy
! Component: 100  -  total flux cleaned = 0.0810906 Jy
! Total flux subtracted in 100 components = 0.0810906 Jy
! Clean residual min=-0.010227 max=0.010278 Jy/beam
! Clean residual mean=-0.000003 rms=0.003728 Jy/beam
! Combined flux in latest and established models = 0.0810906 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 28 components and 0.0810906 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.085210Jy  sigma=0.170752
! Fit after  self-cal, rms=0.084407Jy  sigma=0.168468
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=11.38 mas, bmaj=24.34 mas, bpa=62.28 degrees
! Estimated noise=7.15924 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00868404 Jy
! Component: 100  -  total flux cleaned = 0.0104656 Jy
! Component: 150  -  total flux cleaned = 0.010446 Jy
! Component: 200  -  total flux cleaned = 0.00921602 Jy
! Total flux subtracted in 200 components = 0.00921602 Jy
! Clean residual min=-0.003765 max=0.003757 Jy/beam
! Clean residual mean=0.000004 rms=0.002071 Jy/beam
! Combined flux in latest and established models = 0.0903066 Jy
! Performing phase self-cal
! Adding 115 model components to the UV plane model.
! The established model now contains 141 components and 0.0903066 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.079144Jy  sigma=0.158234
! Fit after  self-cal, rms=0.078655Jy  sigma=0.157503
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.92     KP        1.02     LA        0.92     
!   OV        1.03     PT        1.04     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.98     KP        1.00     LA        0.89     
!   OV        0.93     PT        1.03     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        0.95     KP        1.05     LA        0.84     
!   OV        1.08     PT        1.12     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.91     KP        0.92     LA        0.82     
!   OV        0.89     PT        0.92     
! 
! 
! Fit before self-cal, rms=0.078655Jy  sigma=0.157503
! Fit after  self-cal, rms=0.071668Jy  sigma=0.155318
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=11.61 mas, bmaj=24.39 mas, bpa=62.18 degrees
! Estimated noise=6.86386 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00425394 Jy
! Component: 100  -  total flux cleaned = 0.0042863 Jy
! Component: 150  -  total flux cleaned = 0.00434172 Jy
! Component: 200  -  total flux cleaned = 0.00463846 Jy
! Total flux subtracted in 200 components = 0.00463846 Jy
! Clean residual min=-0.001147 max=0.001147 Jy/beam
! Clean residual mean=0.000002 rms=0.000432 Jy/beam
! Combined flux in latest and established models = 0.0949451 Jy
! Performing phase self-cal
! Adding 88 model components to the UV plane model.
! The established model now contains 228 components and 0.0949451 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.071212Jy  sigma=0.154489
! Fit after  self-cal, rms=0.071090Jy  sigma=0.154307
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.071090Jy  sigma=0.154307
! Fit after  self-cal, rms=0.070574Jy  sigma=0.154279
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=11.62 mas, bmaj=24.38 mas, bpa=62.21 degrees
! Estimated noise=6.8112 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000776791 Jy
! Component: 100  -  total flux cleaned = 0.000954089 Jy
! Component: 150  -  total flux cleaned = 0.00101919 Jy
! Component: 200  -  total flux cleaned = 0.000822882 Jy
! Total flux subtracted in 200 components = 0.000822882 Jy
! Clean residual min=-0.000788 max=0.000782 Jy/beam
! Clean residual mean=-0.000002 rms=0.000298 Jy/beam
! Combined flux in latest and established models = 0.0957679 Jy
selfcal
! Performing phase self-cal
! Adding 71 model components to the UV plane model.
! The established model now contains 291 components and 0.0957679 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.070459Jy  sigma=0.154065
! Fit after  self-cal, rms=0.070451Jy  sigma=0.154045
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000230723 Jy
! Component: 100  -  total flux cleaned = -0.000463573 Jy
! Component: 150  -  total flux cleaned = -0.000547765 Jy
! Component: 200  -  total flux cleaned = -0.00079322 Jy
! Total flux subtracted in 200 components = -0.00079322 Jy
! Clean residual min=-0.000660 max=0.000662 Jy/beam
! Clean residual mean=-0.000003 rms=0.000258 Jy/beam
! Combined flux in latest and established models = 0.0949747 Jy
! Performing phase self-cal
! Adding 64 model components to the UV plane model.
! The established model now contains 350 components and 0.0949747 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.070394Jy  sigma=0.153926
! Fit after  self-cal, rms=0.070388Jy  sigma=0.153919
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.070388Jy  sigma=0.153919
! Fit after  self-cal, rms=0.070164Jy  sigma=0.153907
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=11.62 mas, bmaj=24.36 mas, bpa=62.21 degrees
! Estimated noise=6.78526 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000319014 Jy
! Component: 100  -  total flux cleaned = -0.000238105 Jy
! Component: 150  -  total flux cleaned = -7.73795e-05 Jy
! Component: 200  -  total flux cleaned = -1.09276e-06 Jy
! Total flux subtracted in 200 components = -1.09276e-06 Jy
! Clean residual min=-0.000615 max=0.000613 Jy/beam
! Clean residual mean=-0.000003 rms=0.000240 Jy/beam
! Combined flux in latest and established models = 0.0949736 Jy
selfcal
! Performing phase self-cal
! Adding 64 model components to the UV plane model.
! The established model now contains 403 components and 0.0949736 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.070114Jy  sigma=0.153809
! Fit after  self-cal, rms=0.070114Jy  sigma=0.153803
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00039901 Jy
! Component: 100  -  total flux cleaned = -0.000360909 Jy
! Component: 150  -  total flux cleaned = -0.000430889 Jy
! Component: 200  -  total flux cleaned = -0.000532716 Jy
! Total flux subtracted in 200 components = -0.000532716 Jy
! Clean residual min=-0.000560 max=0.000567 Jy/beam
! Clean residual mean=-0.000002 rms=0.000222 Jy/beam
! Combined flux in latest and established models = 0.0944409 Jy
! Performing phase self-cal
! Adding 62 model components to the UV plane model.
! The established model now contains 444 components and 0.0944409 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.070076Jy  sigma=0.153724
! Fit after  self-cal, rms=0.070072Jy  sigma=0.153721
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.070072Jy  sigma=0.153721
! Fit after  self-cal, rms=0.069870Jy  sigma=0.153711
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=12.69 mas, bmaj=24.32 mas, bpa=60.23 degrees
! Estimated noise=6.84872 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000433969 Jy
! Component: 100  -  total flux cleaned = -0.000434996 Jy
! Component: 150  -  total flux cleaned = -0.000364972 Jy
! Component: 200  -  total flux cleaned = -0.000330296 Jy
! Total flux subtracted in 200 components = -0.000330296 Jy
! Clean residual min=-0.000547 max=0.000550 Jy/beam
! Clean residual mean=-0.000002 rms=0.000220 Jy/beam
! Combined flux in latest and established models = 0.0941106 Jy
selfcal
! Performing phase self-cal
! Adding 62 model components to the UV plane model.
! The established model now contains 485 components and 0.0941106 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069832Jy  sigma=0.153636
! Fit after  self-cal, rms=0.069833Jy  sigma=0.153632
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000236587 Jy
! Component: 100  -  total flux cleaned = -0.000202789 Jy
! Component: 150  -  total flux cleaned = -0.000204261 Jy
! Component: 200  -  total flux cleaned = -0.000145213 Jy
! Total flux subtracted in 200 components = -0.000145213 Jy
! Clean residual min=-0.000503 max=0.000499 Jy/beam
! Clean residual mean=-0.000001 rms=0.000207 Jy/beam
! Combined flux in latest and established models = 0.0939654 Jy
! Performing phase self-cal
! Adding 60 model components to the UV plane model.
! The established model now contains 522 components and 0.0939654 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069806Jy  sigma=0.153573
! Fit after  self-cal, rms=0.069803Jy  sigma=0.153570
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=11.63 mas, bmaj=24.35 mas, bpa=62.19 degrees
! Estimated noise=6.76071 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 11.63 x 24.35 at 62.19 degrees (North through East)
! Clean map  min=-0.0093106  max=0.085193 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=10.04 mas, bmaj=24.12 mas, bpa=63.02 degrees
! Estimated noise=10.9208 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.063931 Jy
! Component: 100  -  total flux cleaned = 0.0727884 Jy
! Component: 150  -  total flux cleaned = 0.0803074 Jy
! Component: 200  -  total flux cleaned = 0.08155 Jy
! Total flux subtracted in 200 components = 0.08155 Jy
! Clean residual min=-0.005063 max=0.005035 Jy/beam
! Clean residual mean=0.000000 rms=0.002075 Jy/beam
! Combined flux in latest and established models = 0.08155 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 65 model components to the UV plane model.
! The established model now contains 65 components and 0.08155 Jy
! Inverting map and beam 
! Estimated beam: bmin=11.63 mas, bmaj=24.35 mas, bpa=62.19 degrees
! Estimated noise=6.76071 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000540121 Jy
! Component: 100  -  total flux cleaned = 0.00163507 Jy
! Component: 150  -  total flux cleaned = 0.00333726 Jy
! Component: 200  -  total flux cleaned = 0.00496204 Jy
! Total flux subtracted in 200 components = 0.00496204 Jy
! Clean residual min=-0.002474 max=0.002481 Jy/beam
! Clean residual mean=-0.000003 rms=0.001127 Jy/beam
! Combined flux in latest and established models = 0.086512 Jy
! Adding 83 model components to the UV plane model.
! The established model now contains 148 components and 0.086512 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=12.69 mas, bmaj=24.32 mas, bpa=60.23 degrees
! Estimated noise=6.84872 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000685712 Jy
! Component: 100  -  total flux cleaned = 0.00114109 Jy
! Component: 150  -  total flux cleaned = 0.00113647 Jy
! Component: 200  -  total flux cleaned = 0.00113004 Jy
! Total flux subtracted in 200 components = 0.00113004 Jy
! Clean residual min=-0.001351 max=0.001352 Jy/beam
! Clean residual mean=-0.000003 rms=0.000573 Jy/beam
! Combined flux in latest and established models = 0.087642 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000314682 Jy
! Component: 100  -  total flux cleaned = 0.000614704 Jy
! Component: 150  -  total flux cleaned = 0.000760675 Jy
! Component: 200  -  total flux cleaned = 0.00111276 Jy
! Total flux subtracted in 200 components = 0.00111276 Jy
! Clean residual min=-0.001153 max=0.001151 Jy/beam
! Clean residual mean=-0.000001 rms=0.000431 Jy/beam
! Combined flux in latest and established models = 0.0887548 Jy
! Adding 156 model components to the UV plane model.
! The established model now contains 303 components and 0.0887548 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=11.63 mas, bmaj=24.35 mas, bpa=62.19 degrees
! Estimated noise=6.76071 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000625412 Jy
! Component: 100  -  total flux cleaned = -0.000677984 Jy
! Component: 150  -  total flux cleaned = -0.000721767 Jy
! Component: 200  -  total flux cleaned = -0.000761881 Jy
! Total flux subtracted in 200 components = -0.000761881 Jy
! Clean residual min=-0.000662 max=0.000664 Jy/beam
! Clean residual mean=-0.000002 rms=0.000246 Jy/beam
! Combined flux in latest and established models = 0.0879929 Jy
selfcal
! Performing phase self-cal
! Adding 74 model components to the UV plane model.
! The established model now contains 377 components and 0.0879929 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069891Jy  sigma=0.153845
! Fit after  self-cal, rms=0.069885Jy  sigma=0.153817
wmodel /g0/scr/pima/npcsb_uvs/J0806+8126_S_map.mod
! Writing 377 model components to file: /g0/scr/pima/npcsb_uvs/J0806+8126_S_map.mod
wobs /g0/scr/pima/npcsb_uvs/J0806+8126_S_uvs.fits
! Writing UV FITS file: /g0/scr/pima/npcsb_uvs/J0806+8126_S_uvs.fits
wwins /g0/scr/pima/npcsb_uvs/J0806+8126_S_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
![Exited script file: /home/lpetrov/bin/01_muppet]
! 
wmap "/g0/scr/pima/npcsb_uvs/J0806+8126_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 11.63 x 24.35 at 62.19 degrees (North through East)
! Clean map  min=-0.0097874  max=0.077949 Jy/beam
! Writing clean map to FITS file: /g0/scr/pima/npcsb_uvs/J0806+8126_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0779486 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00025148 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.967866 0.967866 1.93573 3.87146 7.74293 15.4859 30.9717 61.9434
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0007 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.077 
quit
! Quitting program
! Log file /g0/scr/pima/npcsb_uvs/J0806+8126_S_uvs.log closed on Wed Sep 25 00:09:59 2013