! Started logfile: /g0/scr/pima/npcsb_uvs/J0733+5022_X_uvs.log on Wed Sep 25 00:04:21 2013
obs /g0/scr/pima/npcsb_uvs/J0733+5022_X_uva.fits
! Reading UV FITS file: /g0/scr/pima/npcsb_uvs/J0733+5022_X_uva.fits
! AN table 1: 12 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.827778 visibilities/baseline/integration-bin.
! Found source: J0733+5022
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.40993e+09        8e+06          1        8e+06
!  02        2  8.47993e+09        8e+06          1        8e+06
!  03        3  8.79493e+09        8e+06          1        8e+06
!  04        4  8.89993e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 1788 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.2 
print "taper_size =",taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsb_uvs/J0733+5022_X]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 13 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 13 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 13 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 13 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.088326Jy  sigma=2.627717
! Fit after  self-cal, rms=0.530274Jy  sigma=1.225077
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.677 mas, bmaj=2.303 mas, bpa=17.45 degrees
! Estimated noise=10.4859 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.36714 Jy
! Component: 100  -  total flux cleaned = 0.464149 Jy
! Total flux subtracted in 100 components = 0.464149 Jy
! Clean residual min=-0.029160 max=0.059708 Jy/beam
! Clean residual mean=-0.000046 rms=0.007639 Jy/beam
! Combined flux in latest and established models = 0.464149 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.464149 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.163845Jy  sigma=0.337338
! Fit after  self-cal, rms=0.163789Jy  sigma=0.337170
! Inverting map 
! Added new window around map position (-2, -0.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0558107 Jy
! Component: 100  -  total flux cleaned = 0.0877209 Jy
! Total flux subtracted in 100 components = 0.0877209 Jy
! Clean residual min=-0.022956 max=0.040221 Jy/beam
! Clean residual mean=-0.000021 rms=0.005174 Jy/beam
! Combined flux in latest and established models = 0.55187 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 18 components and 0.55187 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.138533Jy  sigma=0.261562
! Fit after  self-cal, rms=0.136826Jy  sigma=0.257417
! Inverting map 
! Added new window around map position (2, 0.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0304918 Jy
! Component: 100  -  total flux cleaned = 0.0496639 Jy
! Total flux subtracted in 100 components = 0.0496639 Jy
! Clean residual min=-0.022466 max=0.018101 Jy/beam
! Clean residual mean=-0.000007 rms=0.003937 Jy/beam
! Combined flux in latest and established models = 0.601534 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 33 components and 0.601533 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.126907Jy  sigma=0.227181
! Fit after  self-cal, rms=0.126779Jy  sigma=0.226708
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8174 mas, bmaj=2.563 mas, bpa=16.58 degrees
! Estimated noise=7.27085 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0227879 Jy
! Component: 100  -  total flux cleaned = 0.0379897 Jy
! Component: 150  -  total flux cleaned = 0.048882 Jy
! Component: 200  -  total flux cleaned = 0.0569007 Jy
! Total flux subtracted in 200 components = 0.0569007 Jy
! Clean residual min=-0.020989 max=0.018397 Jy/beam
! Clean residual mean=0.000010 rms=0.003895 Jy/beam
! Combined flux in latest and established models = 0.658434 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 54 components and 0.658434 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.121394Jy  sigma=0.211649
! Fit after  self-cal, rms=0.121325Jy  sigma=0.211479
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.01     HN        1.04     KP        1.02     
!   LA        0.99     MK        1.01     NL        1.16     OV        0.95     
!   PT        1.02     SC        1.03     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.00     HN        1.04     KP        0.91     
!   LA        0.95     MK        0.94     NL        1.11     OV        0.94     
!   PT        1.04     SC        1.00     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.11     FD        1.05     HN        1.00     KP        0.86     
!   LA        0.94     MK        1.01     NL        1.04     OV        0.92     
!   PT        1.06     SC        0.99     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.05     HN        0.97     KP        0.87     
!   LA        0.95     MK        1.08     NL        1.03     OV        0.98     
!   PT        1.15     SC        0.99     
! 
! 
! Fit before self-cal, rms=0.121325Jy  sigma=0.211479
! Fit after  self-cal, rms=0.109293Jy  sigma=0.183795
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8187 mas, bmaj=2.58 mas, bpa=16.56 degrees
! Estimated noise=7.32271 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00328235 Jy
! Component: 100  -  total flux cleaned = -0.00475459 Jy
! Component: 150  -  total flux cleaned = -0.00516537 Jy
! Component: 200  -  total flux cleaned = -0.00528392 Jy
! Total flux subtracted in 200 components = -0.00528392 Jy
! Clean residual min=-0.011047 max=0.010627 Jy/beam
! Clean residual mean=0.000001 rms=0.002293 Jy/beam
! Combined flux in latest and established models = 0.65315 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 66 components and 0.65315 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.108778Jy  sigma=0.182435
! Fit after  self-cal, rms=0.108738Jy  sigma=0.182358
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.108738Jy  sigma=0.182358
! Fit after  self-cal, rms=0.108895Jy  sigma=0.182217
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8176 mas, bmaj=2.581 mas, bpa=16.6 degrees
! Estimated noise=7.33612 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00179154 Jy
! Component: 100  -  total flux cleaned = -0.00215529 Jy
! Component: 150  -  total flux cleaned = -0.00225926 Jy
! Component: 200  -  total flux cleaned = -0.00215703 Jy
! Total flux subtracted in 200 components = -0.00215703 Jy
! Clean residual min=-0.010364 max=0.010188 Jy/beam
! Clean residual mean=0.000001 rms=0.002220 Jy/beam
! Combined flux in latest and established models = 0.650993 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 68 components and 0.650993 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.108570Jy  sigma=0.181431
! Fit after  self-cal, rms=0.108559Jy  sigma=0.181405
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000453912 Jy
! Component: 100  -  total flux cleaned = -0.000543865 Jy
! Component: 150  -  total flux cleaned = -0.000540455 Jy
! Component: 200  -  total flux cleaned = -0.000463278 Jy
! Total flux subtracted in 200 components = -0.000463278 Jy
! Clean residual min=-0.010051 max=0.009747 Jy/beam
! Clean residual mean=0.000000 rms=0.002185 Jy/beam
! Combined flux in latest and established models = 0.65053 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 73 components and 0.65053 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.108390Jy  sigma=0.181010
! Fit after  self-cal, rms=0.108386Jy  sigma=0.181002
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.108386Jy  sigma=0.181002
! Fit after  self-cal, rms=0.108383Jy  sigma=0.180842
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8161 mas, bmaj=2.582 mas, bpa=16.64 degrees
! Estimated noise=7.34084 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00160425 Jy
! Component: 100  -  total flux cleaned = -0.00180098 Jy
! Component: 150  -  total flux cleaned = -0.00196755 Jy
! Component: 200  -  total flux cleaned = -0.00204343 Jy
! Total flux subtracted in 200 components = -0.00204343 Jy
! Clean residual min=-0.009530 max=0.009465 Jy/beam
! Clean residual mean=-0.000000 rms=0.002131 Jy/beam
! Combined flux in latest and established models = 0.648487 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 78 components and 0.648487 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.108187Jy  sigma=0.180344
! Fit after  self-cal, rms=0.108184Jy  sigma=0.180335
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000176561 Jy
! Component: 100  -  total flux cleaned = -0.0002456 Jy
! Component: 150  -  total flux cleaned = -0.000245944 Jy
! Component: 200  -  total flux cleaned = -0.000311041 Jy
! Total flux subtracted in 200 components = -0.000311041 Jy
! Clean residual min=-0.009331 max=0.009194 Jy/beam
! Clean residual mean=-0.000000 rms=0.002109 Jy/beam
! Combined flux in latest and established models = 0.648176 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 82 components and 0.648176 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.108077Jy  sigma=0.180094
! Fit after  self-cal, rms=0.108077Jy  sigma=0.180092
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.108077Jy  sigma=0.180092
! Fit after  self-cal, rms=0.108036Jy  sigma=0.179957
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.052 mas, bmaj=3.076 mas, bpa=11.64 degrees
! Estimated noise=9.38405 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00612089 Jy
! Component: 100  -  total flux cleaned = -0.00657401 Jy
! Component: 150  -  total flux cleaned = -0.00681901 Jy
! Component: 200  -  total flux cleaned = -0.0070285 Jy
! Total flux subtracted in 200 components = -0.0070285 Jy
! Clean residual min=-0.010650 max=0.013431 Jy/beam
! Clean residual mean=-0.000011 rms=0.003315 Jy/beam
! Combined flux in latest and established models = 0.641147 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 95 components and 0.641147 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.108354Jy  sigma=0.180555
! Fit after  self-cal, rms=0.108328Jy  sigma=0.180536
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00013998 Jy
! Component: 100  -  total flux cleaned = -0.000293378 Jy
! Component: 150  -  total flux cleaned = -0.00022041 Jy
! Component: 200  -  total flux cleaned = -0.000218505 Jy
! Total flux subtracted in 200 components = -0.000218505 Jy
! Clean residual min=-0.010591 max=0.013323 Jy/beam
! Clean residual mean=-0.000011 rms=0.003240 Jy/beam
! Combined flux in latest and established models = 0.640929 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 102 components and 0.640929 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.108392Jy  sigma=0.180731
! Fit after  self-cal, rms=0.108378Jy  sigma=0.180720
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8147 mas, bmaj=2.583 mas, bpa=16.68 degrees
! Estimated noise=7.34356 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8147 x 2.583 at 16.68 degrees (North through East)
! Clean map  min=-0.0082032  max=0.46564 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6727 mas, bmaj=2.315 mas, bpa=17.62 degrees
! Estimated noise=10.6662 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.372929 Jy
! Component: 100  -  total flux cleaned = 0.470516 Jy
! Component: 150  -  total flux cleaned = 0.522147 Jy
! Component: 200  -  total flux cleaned = 0.553904 Jy
! Total flux subtracted in 200 components = 0.553904 Jy
! Clean residual min=-0.014044 max=0.018134 Jy/beam
! Clean residual mean=-0.000026 rms=0.003585 Jy/beam
! Combined flux in latest and established models = 0.553904 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 18 model components to the UV plane model.
! The established model now contains 18 components and 0.553904 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8147 mas, bmaj=2.583 mas, bpa=16.68 degrees
! Estimated noise=7.34356 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-10, 22.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0304721 Jy
! Component: 100  -  total flux cleaned = 0.0500748 Jy
! Component: 150  -  total flux cleaned = 0.0635728 Jy
! Component: 200  -  total flux cleaned = 0.0733759 Jy
! Total flux subtracted in 200 components = 0.0733759 Jy
! Clean residual min=-0.008790 max=0.010146 Jy/beam
! Clean residual mean=-0.000012 rms=0.002359 Jy/beam
! Combined flux in latest and established models = 0.62728 Jy
! Adding 35 model components to the UV plane model.
! The established model now contains 46 components and 0.62728 Jy
! Inverting map 
! Added new window around map position (-2, -4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0104161 Jy
! Component: 100  -  total flux cleaned = 0.017641 Jy
! Component: 150  -  total flux cleaned = 0.0235554 Jy
! Component: 200  -  total flux cleaned = 0.0273541 Jy
! Total flux subtracted in 200 components = 0.0273541 Jy
! Clean residual min=-0.007534 max=0.007573 Jy/beam
! Clean residual mean=-0.000003 rms=0.001768 Jy/beam
! Combined flux in latest and established models = 0.654634 Jy
! Adding 26 model components to the UV plane model.
! The established model now contains 70 components and 0.654634 Jy
! Inverting map 
! Added new window around map position (-22.4, -36.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00667571 Jy
! Component: 100  -  total flux cleaned = 0.0100489 Jy
! Component: 150  -  total flux cleaned = 0.012248 Jy
! Component: 200  -  total flux cleaned = 0.0135468 Jy
! Total flux subtracted in 200 components = 0.0135468 Jy
! Clean residual min=-0.006738 max=0.006088 Jy/beam
! Clean residual mean=0.000002 rms=0.001549 Jy/beam
! Combined flux in latest and established models = 0.668181 Jy
! Adding 29 model components to the UV plane model.
! The established model now contains 88 components and 0.668181 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.052 mas, bmaj=3.076 mas, bpa=11.64 degrees
! Estimated noise=9.38405 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00236377 Jy
! Component: 100  -  total flux cleaned = 0.00295872 Jy
! Component: 150  -  total flux cleaned = 0.00320697 Jy
! Component: 200  -  total flux cleaned = 0.00320448 Jy
! Total flux subtracted in 200 components = 0.00320448 Jy
! Clean residual min=-0.007195 max=0.005681 Jy/beam
! Clean residual mean=0.000004 rms=0.001848 Jy/beam
! Combined flux in latest and established models = 0.671385 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00031962 Jy
! Component: 100  -  total flux cleaned = 0.000218783 Jy
! Component: 150  -  total flux cleaned = 0.000121538 Jy
! Component: 200  -  total flux cleaned = -5.57453e-05 Jy
! Total flux subtracted in 200 components = -5.57453e-05 Jy
! Clean residual min=-0.006886 max=0.005372 Jy/beam
! Clean residual mean=0.000004 rms=0.001736 Jy/beam
! Combined flux in latest and established models = 0.671329 Jy
! Adding 30 model components to the UV plane model.
! The established model now contains 113 components and 0.671329 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8147 mas, bmaj=2.583 mas, bpa=16.68 degrees
! Estimated noise=7.34356 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000208237 Jy
! Component: 100  -  total flux cleaned = 0.000512799 Jy
! Component: 150  -  total flux cleaned = 0.00118023 Jy
! Component: 200  -  total flux cleaned = 0.0017021 Jy
! Total flux subtracted in 200 components = 0.0017021 Jy
! Clean residual min=-0.006112 max=0.005461 Jy/beam
! Clean residual mean=0.000003 rms=0.001371 Jy/beam
! Combined flux in latest and established models = 0.673032 Jy
selfcal
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 135 components and 0.673032 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.106417Jy  sigma=0.174961
! Fit after  self-cal, rms=0.106388Jy  sigma=0.174688
wmodel /g0/scr/pima/npcsb_uvs/J0733+5022_X_map.mod
! Writing 135 model components to file: /g0/scr/pima/npcsb_uvs/J0733+5022_X_map.mod
wobs /g0/scr/pima/npcsb_uvs/J0733+5022_X_uvs.fits
! Writing UV FITS file: /g0/scr/pima/npcsb_uvs/J0733+5022_X_uvs.fits
wwins /g0/scr/pima/npcsb_uvs/J0733+5022_X_map.win
! wwins: Wrote 6 windows to /g0/scr/pima/npcsb_uvs/J0733+5022_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00240025 Jy
! Component: 100  -  total flux cleaned = -0.00258478 Jy
! Component: 150  -  total flux cleaned = -0.00284313 Jy
! Component: 200  -  total flux cleaned = -0.00301248 Jy
! Component: 250  -  total flux cleaned = -0.00333578 Jy
! Component: 300  -  total flux cleaned = -0.00325834 Jy
! Component: 350  -  total flux cleaned = -0.00318319 Jy
! Component: 400  -  total flux cleaned = -0.00296748 Jy
! Component: 450  -  total flux cleaned = -0.00275762 Jy
! Component: 500  -  total flux cleaned = -0.00228286 Jy
! Component: 550  -  total flux cleaned = -0.00195277 Jy
! Component: 600  -  total flux cleaned = -0.00144006 Jy
! Component: 650  -  total flux cleaned = -0.00125379 Jy
! Component: 700  -  total flux cleaned = -0.00106947 Jy
! Component: 750  -  total flux cleaned = -0.000711272 Jy
! Component: 800  -  total flux cleaned = -0.000595607 Jy
! Component: 850  -  total flux cleaned = -0.000480775 Jy
! Component: 900  -  total flux cleaned = -0.000200191 Jy
! Component: 950  -  total flux cleaned = -9.05218e-05 Jy
! Component: 1000  -  total flux cleaned = 1.76615e-05 Jy
! Component: 1050  -  total flux cleaned = 0.000336012 Jy
! Component: 1100  -  total flux cleaned = 0.000492355 Jy
! Component: 1150  -  total flux cleaned = 0.000799527 Jy
! Component: 1200  -  total flux cleaned = 0.00100021 Jy
! Component: 1250  -  total flux cleaned = 0.00124669 Jy
! Component: 1300  -  total flux cleaned = 0.0013915 Jy
! Component: 1350  -  total flux cleaned = 0.00153393 Jy
! Component: 1400  -  total flux cleaned = 0.001722 Jy
! Component: 1450  -  total flux cleaned = 0.00176817 Jy
! Component: 1500  -  total flux cleaned = 0.00195012 Jy
! Component: 1550  -  total flux cleaned = 0.0019051 Jy
! Component: 1600  -  total flux cleaned = 0.00208279 Jy
! Component: 1650  -  total flux cleaned = 0.00225803 Jy
! Component: 1700  -  total flux cleaned = 0.00225785 Jy
! Component: 1750  -  total flux cleaned = 0.00234378 Jy
! Component: 1800  -  total flux cleaned = 0.00259658 Jy
! Component: 1850  -  total flux cleaned = 0.00276247 Jy
! Component: 1900  -  total flux cleaned = 0.00292591 Jy
! Component: 1950  -  total flux cleaned = 0.00312883 Jy
! Component: 2000  -  total flux cleaned = 0.00324926 Jy
! Component: 2050  -  total flux cleaned = 0.00340813 Jy
! Component: 2100  -  total flux cleaned = 0.00360393 Jy
! Component: 2150  -  total flux cleaned = 0.00375902 Jy
! Component: 2200  -  total flux cleaned = 0.00395117 Jy
! Component: 2250  -  total flux cleaned = 0.00414061 Jy
! Component: 2300  -  total flux cleaned = 0.00432816 Jy
! Component: 2350  -  total flux cleaned = 0.00443964 Jy
! Component: 2400  -  total flux cleaned = 0.0045873 Jy
! Component: 2450  -  total flux cleaned = 0.00487883 Jy
! Component: 2500  -  total flux cleaned = 0.00502309 Jy
! Component: 2550  -  total flux cleaned = 0.00509494 Jy
! Component: 2600  -  total flux cleaned = 0.0053076 Jy
! Component: 2650  -  total flux cleaned = 0.00541261 Jy
! Component: 2700  -  total flux cleaned = 0.00551659 Jy
! Component: 2750  -  total flux cleaned = 0.00572318 Jy
! Component: 2800  -  total flux cleaned = 0.00579162 Jy
! Component: 2850  -  total flux cleaned = 0.00582593 Jy
! Component: 2900  -  total flux cleaned = 0.00596044 Jy
! Component: 2950  -  total flux cleaned = 0.00602726 Jy
! Component: 3000  -  total flux cleaned = 0.00599454 Jy
! Component: 3050  -  total flux cleaned = 0.00612554 Jy
! Component: 3100  -  total flux cleaned = 0.00599606 Jy
! Component: 3150  -  total flux cleaned = 0.00618939 Jy
! Component: 3200  -  total flux cleaned = 0.00606138 Jy
! Component: 3250  -  total flux cleaned = 0.00615704 Jy
! Component: 3300  -  total flux cleaned = 0.00612572 Jy
! Component: 3350  -  total flux cleaned = 0.00612565 Jy
! Component: 3400  -  total flux cleaned = 0.00621906 Jy
! Component: 3450  -  total flux cleaned = 0.0061882 Jy
! Component: 3500  -  total flux cleaned = 0.00615735 Jy
! Component: 3550  -  total flux cleaned = 0.00624836 Jy
! Component: 3600  -  total flux cleaned = 0.00609671 Jy
! Component: 3650  -  total flux cleaned = 0.0062171 Jy
! Component: 3700  -  total flux cleaned = 0.00618683 Jy
! Component: 3750  -  total flux cleaned = 0.00612774 Jy
! Component: 3800  -  total flux cleaned = 0.00618711 Jy
! Component: 3850  -  total flux cleaned = 0.00612906 Jy
! Component: 3900  -  total flux cleaned = 0.00624558 Jy
! Component: 3950  -  total flux cleaned = 0.00621675 Jy
! Component: 4000  -  total flux cleaned = 0.00624521 Jy
! Component: 4050  -  total flux cleaned = 0.00618803 Jy
! Total flux subtracted in 4096 components = 0.00610216 Jy
! Clean residual min=-0.002073 max=0.001544 Jy/beam
! Clean residual mean=-0.000003 rms=0.000472 Jy/beam
! Combined flux in latest and established models = 0.679134 Jy
keep
! Adding 268 model components to the UV plane model.
! The established model now contains 403 components and 0.679134 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/g0/scr/pima/npcsb_uvs/J0733+5022_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8147 x 2.583 at 16.68 degrees (North through East)
! Clean map  min=-0.0052161  max=0.47073 Jy/beam
! Writing clean map to FITS file: /g0/scr/pima/npcsb_uvs/J0733+5022_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.470728 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000464658 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.296132 0.296132 0.592263 1.18453 2.36905 4.73811 9.47621 18.9524 37.9049 75.8097
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0013 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.47 
quit
! Quitting program
! Log file /g0/scr/pima/npcsb_uvs/J0733+5022_X_uvs.log closed on Wed Sep 25 00:04:26 2013