! Started logfile: /g0/scr/pima/npcsb_uvs/J0648+7756_S_uvs.log on Wed Sep 25 00:09:40 2013
obs /g0/scr/pima/npcsb_uvs/J0648+7756_S_uva.fits
! Reading UV FITS file: /g0/scr/pima/npcsb_uvs/J0648+7756_S_uva.fits
! AN table 1: 45 integrations on 15 of 15 possible baselines.
! Apparent sampling: 0.466667 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: J0648+7756
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23693e+09        8e+06          1        8e+06
!  02        2  2.26693e+09        8e+06          1        8e+06
!  03        3  2.35693e+09        8e+06          1        8e+06
!  04        4  2.37693e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 1260 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsb_uvs/J0648+7756_S]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 90 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 90 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 90 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 90 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.033875Jy  sigma=2.265182
! Fit after  self-cal, rms=0.913538Jy  sigma=1.959405
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=24.8 mas, bmaj=40.13 mas, bpa=-16.74 degrees
! Estimated noise=15.7278 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0670214 Jy
! Component: 100  -  total flux cleaned = 0.0657829 Jy
! Total flux subtracted in 100 components = 0.0657829 Jy
! Clean residual min=-0.008188 max=0.008189 Jy/beam
! Clean residual mean=0.000085 rms=0.003886 Jy/beam
! Combined flux in latest and established models = 0.0657829 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 28 components and 0.0657829 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.078861Jy  sigma=0.147688
! Fit after  self-cal, rms=0.077956Jy  sigma=0.146001
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=27.2 mas, bmaj=35.7 mas, bpa=3.457 degrees
! Estimated noise=11.302 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00201964 Jy
! Component: 100  -  total flux cleaned = -0.00304203 Jy
! Component: 150  -  total flux cleaned = -0.00321009 Jy
! Component: 200  -  total flux cleaned = -0.00183863 Jy
! Total flux subtracted in 200 components = -0.00183863 Jy
! Clean residual min=-0.003200 max=0.003271 Jy/beam
! Clean residual mean=0.000052 rms=0.001620 Jy/beam
! Combined flux in latest and established models = 0.0639443 Jy
! Performing phase self-cal
! Adding 123 model components to the UV plane model.
! The established model now contains 150 components and 0.0639443 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.074759Jy  sigma=0.140409
! Fit after  self-cal, rms=0.074001Jy  sigma=0.139764
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00     KP        0.98     LA        1.02     
!   OV        1.00*    PT        1.01     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.06     KP        1.07     LA        0.94     
!   OV        1.00*    PT        0.94     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.11     KP        1.12     LA        0.92     
!   OV        1.00*    PT        0.95     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        0.99     KP        1.04     LA        0.83     
!   OV        1.00*    PT        0.93     
! 
! 
! Fit before self-cal, rms=0.074001Jy  sigma=0.139764
! Fit after  self-cal, rms=0.068650Jy  sigma=0.138667
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=27.39 mas, bmaj=35.81 mas, bpa=3.106 degrees
! Estimated noise=10.994 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000111989 Jy
! Component: 100  -  total flux cleaned = -0.000546017 Jy
! Component: 150  -  total flux cleaned = -0.000773922 Jy
! Component: 200  -  total flux cleaned = -0.00077054 Jy
! Total flux subtracted in 200 components = -0.00077054 Jy
! Clean residual min=-0.001031 max=0.001025 Jy/beam
! Clean residual mean=0.000005 rms=0.000343 Jy/beam
! Combined flux in latest and established models = 0.0631738 Jy
! Performing phase self-cal
! Adding 73 model components to the UV plane model.
! The established model now contains 213 components and 0.0631738 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.068507Jy  sigma=0.138473
! Fit after  self-cal, rms=0.068309Jy  sigma=0.138317
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.068309Jy  sigma=0.138317
! Fit after  self-cal, rms=0.068788Jy  sigma=0.138344
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=27.39 mas, bmaj=35.84 mas, bpa=2.939 degrees
! Estimated noise=11.0409 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00016418 Jy
! Component: 100  -  total flux cleaned = -5.1209e-05 Jy
! Component: 150  -  total flux cleaned = 0.000122277 Jy
! Component: 200  -  total flux cleaned = 0.000150389 Jy
! Total flux subtracted in 200 components = 0.000150389 Jy
! Clean residual min=-0.000495 max=0.000489 Jy/beam
! Clean residual mean=0.000007 rms=0.000182 Jy/beam
! Combined flux in latest and established models = 0.0633242 Jy
selfcal
! Performing phase self-cal
! Adding 53 model components to the UV plane model.
! The established model now contains 261 components and 0.0633242 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.068734Jy  sigma=0.138276
! Fit after  self-cal, rms=0.068752Jy  sigma=0.138251
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.51947e-06 Jy
! Component: 100  -  total flux cleaned = -2.29974e-05 Jy
! Component: 150  -  total flux cleaned = 3.50412e-05 Jy
! Component: 200  -  total flux cleaned = 0.000130005 Jy
! Total flux subtracted in 200 components = 0.000130005 Jy
! Clean residual min=-0.000546 max=0.000547 Jy/beam
! Clean residual mean=0.000005 rms=0.000194 Jy/beam
! Combined flux in latest and established models = 0.0634542 Jy
! Performing phase self-cal
! Adding 60 model components to the UV plane model.
! The established model now contains 307 components and 0.0634542 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.068725Jy  sigma=0.138218
! Fit after  self-cal, rms=0.068749Jy  sigma=0.138205
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.068749Jy  sigma=0.138205
! Fit after  self-cal, rms=0.069228Jy  sigma=0.138204
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=27.36 mas, bmaj=35.87 mas, bpa=2.712 degrees
! Estimated noise=11.088 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000528247 Jy
! Component: 100  -  total flux cleaned = 0.000813664 Jy
! Component: 150  -  total flux cleaned = 0.000766587 Jy
! Component: 200  -  total flux cleaned = 0.000457218 Jy
! Total flux subtracted in 200 components = 0.000457218 Jy
! Clean residual min=-0.000431 max=0.000424 Jy/beam
! Clean residual mean=0.000005 rms=0.000159 Jy/beam
! Combined flux in latest and established models = 0.0639114 Jy
selfcal
! Performing phase self-cal
! Adding 106 model components to the UV plane model.
! The established model now contains 405 components and 0.0639114 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069196Jy  sigma=0.138161
! Fit after  self-cal, rms=0.069203Jy  sigma=0.138151
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000241672 Jy
! Component: 100  -  total flux cleaned = 0.000141278 Jy
! Component: 150  -  total flux cleaned = -5.97611e-05 Jy
! Component: 200  -  total flux cleaned = -0.000238296 Jy
! Total flux subtracted in 200 components = -0.000238296 Jy
! Clean residual min=-0.000431 max=0.000423 Jy/beam
! Clean residual mean=0.000004 rms=0.000153 Jy/beam
! Combined flux in latest and established models = 0.0636731 Jy
! Performing phase self-cal
! Adding 68 model components to the UV plane model.
! The established model now contains 468 components and 0.0636731 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069183Jy  sigma=0.138125
! Fit after  self-cal, rms=0.069166Jy  sigma=0.138121
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069166Jy  sigma=0.138121
! Fit after  self-cal, rms=0.069669Jy  sigma=0.138123
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=27.46 mas, bmaj=36.03 mas, bpa=2.577 degrees
! Estimated noise=11.1346 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000413305 Jy
! Component: 100  -  total flux cleaned = 0.00084812 Jy
! Component: 150  -  total flux cleaned = 0.00104439 Jy
! Component: 200  -  total flux cleaned = 0.000863822 Jy
! Total flux subtracted in 200 components = 0.000863822 Jy
! Clean residual min=-0.000376 max=0.000373 Jy/beam
! Clean residual mean=0.000006 rms=0.000137 Jy/beam
! Combined flux in latest and established models = 0.0645369 Jy
selfcal
! Performing phase self-cal
! Adding 99 model components to the UV plane model.
! The established model now contains 547 components and 0.0645369 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069642Jy  sigma=0.138093
! Fit after  self-cal, rms=0.069643Jy  sigma=0.138088
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.71229e-05 Jy
! Component: 100  -  total flux cleaned = 1.69808e-05 Jy
! Component: 150  -  total flux cleaned = -0.00013353 Jy
! Component: 200  -  total flux cleaned = -0.000154597 Jy
! Total flux subtracted in 200 components = -0.000154597 Jy
! Clean residual min=-0.000380 max=0.000371 Jy/beam
! Clean residual mean=0.000003 rms=0.000136 Jy/beam
! Combined flux in latest and established models = 0.0643823 Jy
! Performing phase self-cal
! Adding 67 model components to the UV plane model.
! The established model now contains 593 components and 0.0643823 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069629Jy  sigma=0.138068
! Fit after  self-cal, rms=0.069613Jy  sigma=0.138065
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=27.33 mas, bmaj=35.89 mas, bpa=2.433 degrees
! Estimated noise=11.1459 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 27.33 x 35.89 at 2.433 degrees (North through East)
! Clean map  min=-0.013213  max=0.07897 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=24.86 mas, bmaj=40.39 mas, bpa=-16.99 degrees
! Estimated noise=15.59 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0557576 Jy
! Component: 100  -  total flux cleaned = 0.0532787 Jy
! Component: 150  -  total flux cleaned = 0.0576754 Jy
! Component: 200  -  total flux cleaned = 0.061645 Jy
! Total flux subtracted in 200 components = 0.061645 Jy
! Clean residual min=-0.004560 max=0.004476 Jy/beam
! Clean residual mean=0.000065 rms=0.002238 Jy/beam
! Combined flux in latest and established models = 0.061645 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 98 model components to the UV plane model.
! The established model now contains 98 components and 0.061645 Jy
! Inverting map and beam 
! Estimated beam: bmin=27.33 mas, bmaj=35.89 mas, bpa=2.433 degrees
! Estimated noise=11.1459 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000452045 Jy
! Component: 100  -  total flux cleaned = -0.00309485 Jy
! Component: 150  -  total flux cleaned = -0.00308887 Jy
! Component: 200  -  total flux cleaned = -0.00269197 Jy
! Total flux subtracted in 200 components = -0.00269197 Jy
! Clean residual min=-0.002232 max=0.002193 Jy/beam
! Clean residual mean=0.000023 rms=0.000923 Jy/beam
! Combined flux in latest and established models = 0.0589531 Jy
! Adding 116 model components to the UV plane model.
! The established model now contains 214 components and 0.0589531 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=27.46 mas, bmaj=36.03 mas, bpa=2.577 degrees
! Estimated noise=11.1346 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00143557 Jy
! Component: 100  -  total flux cleaned = 0.00277497 Jy
! Component: 150  -  total flux cleaned = 0.00348069 Jy
! Component: 200  -  total flux cleaned = 0.00399893 Jy
! Total flux subtracted in 200 components = 0.00399893 Jy
! Clean residual min=-0.000628 max=0.000628 Jy/beam
! Clean residual mean=0.000004 rms=0.000246 Jy/beam
! Combined flux in latest and established models = 0.062952 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000187258 Jy
! Component: 100  -  total flux cleaned = 0.000299403 Jy
! Component: 150  -  total flux cleaned = 0.00045809 Jy
! Component: 200  -  total flux cleaned = 0.000583673 Jy
! Total flux subtracted in 200 components = 0.000583673 Jy
! Clean residual min=-0.000724 max=0.000712 Jy/beam
! Clean residual mean=-0.000000 rms=0.000279 Jy/beam
! Combined flux in latest and established models = 0.0635357 Jy
! Adding 137 model components to the UV plane model.
! The established model now contains 351 components and 0.0635357 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=27.33 mas, bmaj=35.89 mas, bpa=2.433 degrees
! Estimated noise=11.1459 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.28059e-05 Jy
! Component: 100  -  total flux cleaned = -7.27028e-05 Jy
! Component: 150  -  total flux cleaned = -0.000103599 Jy
! Component: 200  -  total flux cleaned = -0.000105228 Jy
! Total flux subtracted in 200 components = -0.000105228 Jy
! Clean residual min=-0.000590 max=0.000597 Jy/beam
! Clean residual mean=0.000008 rms=0.000189 Jy/beam
! Combined flux in latest and established models = 0.0634305 Jy
selfcal
! Performing phase self-cal
! Adding 76 model components to the UV plane model.
! The established model now contains 423 components and 0.0634305 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069647Jy  sigma=0.138157
! Fit after  self-cal, rms=0.069695Jy  sigma=0.138141
wmodel /g0/scr/pima/npcsb_uvs/J0648+7756_S_map.mod
! Writing 423 model components to file: /g0/scr/pima/npcsb_uvs/J0648+7756_S_map.mod
wobs /g0/scr/pima/npcsb_uvs/J0648+7756_S_uvs.fits
! Writing UV FITS file: /g0/scr/pima/npcsb_uvs/J0648+7756_S_uvs.fits
wwins /g0/scr/pima/npcsb_uvs/J0648+7756_S_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
![Exited script file: /home/lpetrov/bin/01_muppet]
! 
wmap "/g0/scr/pima/npcsb_uvs/J0648+7756_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 27.33 x 35.89 at 2.433 degrees (North through East)
! Clean map  min=-0.014937  max=0.074917 Jy/beam
! Writing clean map to FITS file: /g0/scr/pima/npcsb_uvs/J0648+7756_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0749166 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000174563 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.699028 0.699028 1.39806 2.79611 5.59223 11.1845 22.3689 44.7378 89.4756
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0005 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.074 
quit
! Quitting program
! Log file /g0/scr/pima/npcsb_uvs/J0648+7756_S_uvs.log closed on Wed Sep 25 00:09:44 2013