! Started logfile: /g0/scr/pima/npcsb_uvs/J0555+3948_S_uvs.log on Wed Sep 25 00:09:30 2013
obs /g0/scr/pima/npcsb_uvs/J0555+3948_S_uva.fits
! Reading UV FITS file: /g0/scr/pima/npcsb_uvs/J0555+3948_S_uva.fits
! AN table 1: 23 integrations on 45 of 45 possible baselines.
! Apparent sampling: 1 visibilities/baseline/integration-bin.
! Found source: J0555+3948
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23693e+09        8e+06          1        8e+06
!  02        2  2.26693e+09        8e+06          1        8e+06
!  03        3  2.35693e+09        8e+06          1        8e+06
!  04        4  2.37693e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 4140 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsb_uvs/J0555+3948_S]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=3.442806Jy  sigma=13.247398
! Fit after  self-cal, rms=2.275008Jy  sigma=8.848064
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.724 mas, bmaj=8.91 mas, bpa=-35.87 degrees
! Estimated noise=6.36556 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.42303 Jy
! Component: 100  -  total flux cleaned = 2.98026 Jy
! Total flux subtracted in 100 components = 2.98026 Jy
! Clean residual min=-0.141055 max=0.216012 Jy/beam
! Clean residual mean=0.000324 rms=0.042823 Jy/beam
! Combined flux in latest and established models = 2.98026 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 2.98026 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.670982Jy  sigma=2.633872
! Fit after  self-cal, rms=0.670975Jy  sigma=2.633861
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.348 mas, bmaj=8.912 mas, bpa=-34.73 degrees
! Estimated noise=4.14495 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.275605 Jy
! Component: 100  -  total flux cleaned = 0.442256 Jy
! Component: 150  -  total flux cleaned = 0.549555 Jy
! Component: 200  -  total flux cleaned = 0.620628 Jy
! Total flux subtracted in 200 components = 0.620628 Jy
! Clean residual min=-0.101876 max=0.123350 Jy/beam
! Clean residual mean=0.000356 rms=0.027850 Jy/beam
! Combined flux in latest and established models = 3.60088 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 24 components and 3.60088 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.539471Jy  sigma=1.994268
! Fit after  self-cal, rms=0.539451Jy  sigma=1.994166
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.90     FD        0.97     HN        0.95     KP        0.98     
!   LA        1.10     MK        1.03     NL        1.13     OV        0.99     
!   PT        1.08     SC        0.92     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.02     HN        0.97     KP        0.96     
!   LA        1.03     MK        1.21     NL        1.18     OV        0.99     
!   PT        1.01     SC        0.91     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        1.03     HN        0.99     KP        0.95     
!   LA        0.82     MK        1.04     NL        1.27     OV        1.00     
!   PT        1.08     SC        0.96     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.01     HN        0.93     KP        0.90     
!   LA        0.72     MK        1.04     NL        1.20     OV        0.85     
!   PT        0.94     SC        1.02     
! 
! 
! Fit before self-cal, rms=0.539451Jy  sigma=1.994166
! Fit after  self-cal, rms=0.274069Jy  sigma=0.801122
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.414 mas, bmaj=8.863 mas, bpa=-34.44 degrees
! Estimated noise=4.13434 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0722784 Jy
! Component: 100  -  total flux cleaned = -0.090877 Jy
! Component: 150  -  total flux cleaned = -0.0934824 Jy
! Component: 200  -  total flux cleaned = -0.0945833 Jy
! Total flux subtracted in 200 components = -0.0945833 Jy
! Clean residual min=-0.049549 max=0.029302 Jy/beam
! Clean residual mean=-0.000001 rms=0.009075 Jy/beam
! Combined flux in latest and established models = 3.5063 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 34 components and 3.5063 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.247525Jy  sigma=0.737508
! Fit after  self-cal, rms=0.247517Jy  sigma=0.737259
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.247517Jy  sigma=0.737259
! Fit after  self-cal, rms=0.247827Jy  sigma=0.700513
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.446 mas, bmaj=8.841 mas, bpa=-34.34 degrees
! Estimated noise=4.12542 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0454172 Jy
! Component: 100  -  total flux cleaned = -0.0571823 Jy
! Component: 150  -  total flux cleaned = -0.0580984 Jy
! Component: 200  -  total flux cleaned = -0.056788 Jy
! Total flux subtracted in 200 components = -0.056788 Jy
! Clean residual min=-0.032232 max=0.024266 Jy/beam
! Clean residual mean=-0.000019 rms=0.007203 Jy/beam
! Combined flux in latest and established models = 3.44951 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 45 components and 3.44951 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.235168Jy  sigma=0.685486
! Fit after  self-cal, rms=0.235171Jy  sigma=0.685472
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00110292 Jy
! Component: 100  -  total flux cleaned = 0.00158129 Jy
! Component: 150  -  total flux cleaned = 0.0015942 Jy
! Component: 200  -  total flux cleaned = 0.00120494 Jy
! Total flux subtracted in 200 components = 0.00120494 Jy
! Clean residual min=-0.029370 max=0.023788 Jy/beam
! Clean residual mean=-0.000022 rms=0.007067 Jy/beam
! Combined flux in latest and established models = 3.45072 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 56 components and 3.45072 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.232692Jy  sigma=0.687405
! Fit after  self-cal, rms=0.232690Jy  sigma=0.687398
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.232690Jy  sigma=0.687398
! Fit after  self-cal, rms=0.240461Jy  sigma=0.660787
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.477 mas, bmaj=8.817 mas, bpa=-34.24 degrees
! Estimated noise=4.12233 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0324992 Jy
! Component: 100  -  total flux cleaned = -0.0384683 Jy
! Component: 150  -  total flux cleaned = -0.0378215 Jy
! Component: 200  -  total flux cleaned = -0.0378261 Jy
! Total flux subtracted in 200 components = -0.0378261 Jy
! Clean residual min=-0.026388 max=0.021534 Jy/beam
! Clean residual mean=-0.000025 rms=0.006230 Jy/beam
! Combined flux in latest and established models = 3.41289 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 69 components and 3.41289 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.232151Jy  sigma=0.663428
! Fit after  self-cal, rms=0.232152Jy  sigma=0.663420
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.44444e-05 Jy
! Component: 100  -  total flux cleaned = -5.74687e-06 Jy
! Component: 150  -  total flux cleaned = 0.000368909 Jy
! Component: 200  -  total flux cleaned = 2.32897e-05 Jy
! Total flux subtracted in 200 components = 2.32897e-05 Jy
! Clean residual min=-0.025922 max=0.022304 Jy/beam
! Clean residual mean=-0.000026 rms=0.006142 Jy/beam
! Combined flux in latest and established models = 3.41291 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 78 components and 3.41291 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.229949Jy  sigma=0.666788
! Fit after  self-cal, rms=0.229947Jy  sigma=0.666786
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.229947Jy  sigma=0.666786
! Fit after  self-cal, rms=0.239953Jy  sigma=0.649064
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.865 mas, bmaj=9.751 mas, bpa=-30.24 degrees
! Estimated noise=4.72711 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0221784 Jy
! Component: 100  -  total flux cleaned = -0.0328904 Jy
! Component: 150  -  total flux cleaned = -0.0377323 Jy
! Component: 200  -  total flux cleaned = -0.0380355 Jy
! Total flux subtracted in 200 components = -0.0380355 Jy
! Clean residual min=-0.024043 max=0.014003 Jy/beam
! Clean residual mean=-0.000037 rms=0.005291 Jy/beam
! Combined flux in latest and established models = 3.37488 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 91 components and 3.37488 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.236467Jy  sigma=0.650389
! Fit after  self-cal, rms=0.236468Jy  sigma=0.650377
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.85989e-05 Jy
! Component: 100  -  total flux cleaned = 0.000186562 Jy
! Component: 150  -  total flux cleaned = 0.000187913 Jy
! Component: 200  -  total flux cleaned = 0.000275114 Jy
! Total flux subtracted in 200 components = 0.000275114 Jy
! Clean residual min=-0.024222 max=0.013871 Jy/beam
! Clean residual mean=-0.000038 rms=0.005320 Jy/beam
! Combined flux in latest and established models = 3.37515 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 95 components and 3.37515 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.235808Jy  sigma=0.651213
! Fit after  self-cal, rms=0.235808Jy  sigma=0.651209
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.504 mas, bmaj=8.801 mas, bpa=-34.15 degrees
! Estimated noise=4.11864 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.504 x 8.801 at -34.15 degrees (North through East)
! Clean map  min=-0.02388  max=3.1075 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.235808Jy  sigma=0.651209
! Fit after  self-cal, rms=0.105241Jy  sigma=0.507683
! Inverting map and beam 
! Estimated beam: bmin=3.486 mas, bmaj=8.816 mas, bpa=-34.2 degrees
! Estimated noise=4.10468 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00925846 Jy
! Component: 100  -  total flux cleaned = -0.0107046 Jy
! Component: 150  -  total flux cleaned = -0.0110245 Jy
! Component: 200  -  total flux cleaned = -0.0107613 Jy
! Total flux subtracted in 200 components = -0.0107613 Jy
! Clean residual min=-0.018943 max=0.012233 Jy/beam
! Clean residual mean=-0.000013 rms=0.003666 Jy/beam
! Combined flux in latest and established models = 3.36439 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 113 components and 3.36439 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.102031Jy  sigma=0.504831
! Fit after  self-cal, rms=0.102009Jy  sigma=0.504799
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000298628 Jy
! Component: 100  -  total flux cleaned = 0.000516886 Jy
! Component: 150  -  total flux cleaned = 0.000516564 Jy
! Component: 200  -  total flux cleaned = 0.000325402 Jy
! Total flux subtracted in 200 components = 0.000325402 Jy
! Clean residual min=-0.018194 max=0.012095 Jy/beam
! Clean residual mean=-0.000014 rms=0.003600 Jy/beam
! Combined flux in latest and established models = 3.36472 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 122 components and 3.36472 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.101026Jy  sigma=0.503429
! Fit after  self-cal, rms=0.101015Jy  sigma=0.503414
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.101015Jy  sigma=0.503414
! Fit after  self-cal, rms=0.099791Jy  sigma=0.501456
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.82 mas, bmaj=8.768 mas, bpa=-35.59 degrees
! Estimated noise=6.3656 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.42304 Jy
! Component: 100  -  total flux cleaned = 2.95283 Jy
! Component: 150  -  total flux cleaned = 3.11051 Jy
! Component: 200  -  total flux cleaned = 3.19511 Jy
! Total flux subtracted in 200 components = 3.19511 Jy
! Clean residual min=-0.041485 max=0.044544 Jy/beam
! Clean residual mean=0.000028 rms=0.010045 Jy/beam
! Combined flux in latest and established models = 3.19511 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 15 model components to the UV plane model.
! The established model now contains 15 components and 3.19511 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.483 mas, bmaj=8.819 mas, bpa=-34.2 degrees
! Estimated noise=4.10169 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0496435 Jy
! Component: 100  -  total flux cleaned = 0.081738 Jy
! Component: 150  -  total flux cleaned = 0.0966903 Jy
! Component: 200  -  total flux cleaned = 0.105468 Jy
! Total flux subtracted in 200 components = 0.105468 Jy
! Clean residual min=-0.017292 max=0.015756 Jy/beam
! Clean residual mean=0.000048 rms=0.004217 Jy/beam
! Combined flux in latest and established models = 3.30058 Jy
! Adding 29 model components to the UV plane model.
! The established model now contains 36 components and 3.30058 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.872 mas, bmaj=9.76 mas, bpa=-30.13 degrees
! Estimated noise=4.72456 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0162451 Jy
! Component: 100  -  total flux cleaned = 0.0264658 Jy
! Component: 150  -  total flux cleaned = 0.0330813 Jy
! Component: 200  -  total flux cleaned = 0.0344833 Jy
! Total flux subtracted in 200 components = 0.0344833 Jy
! Clean residual min=-0.017410 max=0.012841 Jy/beam
! Clean residual mean=0.000008 rms=0.004169 Jy/beam
! Combined flux in latest and established models = 3.33506 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000911032 Jy
! Component: 100  -  total flux cleaned = 0.00176202 Jy
! Component: 150  -  total flux cleaned = 0.00255811 Jy
! Component: 200  -  total flux cleaned = 0.00343505 Jy
! Total flux subtracted in 200 components = 0.00343505 Jy
! Clean residual min=-0.018134 max=0.012387 Jy/beam
! Clean residual mean=0.000001 rms=0.004164 Jy/beam
! Combined flux in latest and established models = 3.3385 Jy
! Adding 16 model components to the UV plane model.
! The established model now contains 49 components and 3.3385 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.483 mas, bmaj=8.819 mas, bpa=-34.2 degrees
! Estimated noise=4.10169 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00670188 Jy
! Component: 100  -  total flux cleaned = -0.00579065 Jy
! Component: 150  -  total flux cleaned = -0.00457577 Jy
! Component: 200  -  total flux cleaned = -0.00315155 Jy
! Total flux subtracted in 200 components = -0.00315155 Jy
! Clean residual min=-0.015241 max=0.013135 Jy/beam
! Clean residual mean=0.000006 rms=0.003497 Jy/beam
! Combined flux in latest and established models = 3.33534 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 57 components and 3.33534 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.101566Jy  sigma=0.507585
! Fit after  self-cal, rms=0.101517Jy  sigma=0.507539
wmodel /g0/scr/pima/npcsb_uvs/J0555+3948_S_map.mod
! Writing 57 model components to file: /g0/scr/pima/npcsb_uvs/J0555+3948_S_map.mod
wobs /g0/scr/pima/npcsb_uvs/J0555+3948_S_uvs.fits
! Writing UV FITS file: /g0/scr/pima/npcsb_uvs/J0555+3948_S_uvs.fits
wwins /g0/scr/pima/npcsb_uvs/J0555+3948_S_map.win
! wwins: Wrote 1 windows to /g0/scr/pima/npcsb_uvs/J0555+3948_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00696237 Jy
! Component: 100  -  total flux cleaned = -0.0127188 Jy
! Component: 150  -  total flux cleaned = -0.0168436 Jy
! Component: 200  -  total flux cleaned = -0.0200605 Jy
! Component: 250  -  total flux cleaned = -0.0224842 Jy
! Component: 300  -  total flux cleaned = -0.0240092 Jy
! Component: 350  -  total flux cleaned = -0.0247415 Jy
! Component: 400  -  total flux cleaned = -0.0254425 Jy
! Component: 450  -  total flux cleaned = -0.0259441 Jy
! Component: 500  -  total flux cleaned = -0.026752 Jy
! Component: 550  -  total flux cleaned = -0.0272192 Jy
! Component: 600  -  total flux cleaned = -0.0281293 Jy
! Component: 650  -  total flux cleaned = -0.0285717 Jy
! Component: 700  -  total flux cleaned = -0.0295692 Jy
! Component: 750  -  total flux cleaned = -0.0299865 Jy
! Component: 800  -  total flux cleaned = -0.0306574 Jy
! Component: 850  -  total flux cleaned = -0.0305255 Jy
! Component: 900  -  total flux cleaned = -0.030782 Jy
! Component: 950  -  total flux cleaned = -0.0306566 Jy
! Component: 1000  -  total flux cleaned = -0.0304154 Jy
! Component: 1050  -  total flux cleaned = -0.0306499 Jy
! Component: 1100  -  total flux cleaned = -0.030532 Jy
! Component: 1150  -  total flux cleaned = -0.0303055 Jy
! Component: 1200  -  total flux cleaned = -0.0300817 Jy
! Component: 1250  -  total flux cleaned = -0.0297542 Jy
! Component: 1300  -  total flux cleaned = -0.0296465 Jy
! Component: 1350  -  total flux cleaned = -0.0293363 Jy
! Component: 1400  -  total flux cleaned = -0.0290321 Jy
! Component: 1450  -  total flux cleaned = -0.0290318 Jy
! Component: 1500  -  total flux cleaned = -0.0291283 Jy
! Component: 1550  -  total flux cleaned = -0.0291275 Jy
! Component: 1600  -  total flux cleaned = -0.0295978 Jy
! Component: 1650  -  total flux cleaned = -0.0298735 Jy
! Component: 1700  -  total flux cleaned = -0.0297829 Jy
! Component: 1750  -  total flux cleaned = -0.0300533 Jy
! Component: 1800  -  total flux cleaned = -0.030228 Jy
! Component: 1850  -  total flux cleaned = -0.0302274 Jy
! Component: 1900  -  total flux cleaned = -0.0303136 Jy
! Component: 1950  -  total flux cleaned = -0.0302316 Jy
! Component: 2000  -  total flux cleaned = -0.030566 Jy
! Component: 2050  -  total flux cleaned = -0.031059 Jy
! Component: 2100  -  total flux cleaned = -0.0313834 Jy
! Component: 2150  -  total flux cleaned = -0.0315425 Jy
! Component: 2200  -  total flux cleaned = -0.031779 Jy
! Component: 2250  -  total flux cleaned = -0.0317783 Jy
! Component: 2300  -  total flux cleaned = -0.0323977 Jy
! Component: 2350  -  total flux cleaned = -0.0325502 Jy
! Component: 2400  -  total flux cleaned = -0.0327006 Jy
! Component: 2450  -  total flux cleaned = -0.0329244 Jy
! Component: 2500  -  total flux cleaned = -0.0332937 Jy
! Component: 2550  -  total flux cleaned = -0.0334399 Jy
! Component: 2600  -  total flux cleaned = -0.0336578 Jy
! Component: 2650  -  total flux cleaned = -0.0337299 Jy
! Component: 2700  -  total flux cleaned = -0.0335878 Jy
! Component: 2750  -  total flux cleaned = -0.0338693 Jy
! Component: 2800  -  total flux cleaned = -0.0339387 Jy
! Component: 2850  -  total flux cleaned = -0.0340081 Jy
! Component: 2900  -  total flux cleaned = -0.0341453 Jy
! Component: 2950  -  total flux cleaned = -0.0342808 Jy
! Component: 3000  -  total flux cleaned = -0.0343484 Jy
! Component: 3050  -  total flux cleaned = -0.0348798 Jy
! Component: 3100  -  total flux cleaned = -0.0348138 Jy
! Component: 3150  -  total flux cleaned = -0.0350098 Jy
! Component: 3200  -  total flux cleaned = -0.0352034 Jy
! Component: 3250  -  total flux cleaned = -0.0352671 Jy
! Component: 3300  -  total flux cleaned = -0.0355217 Jy
! Component: 3350  -  total flux cleaned = -0.0355851 Jy
! Component: 3400  -  total flux cleaned = -0.0357728 Jy
! Component: 3450  -  total flux cleaned = -0.0358348 Jy
! Component: 3500  -  total flux cleaned = -0.0358956 Jy
! Component: 3550  -  total flux cleaned = -0.0360788 Jy
! Component: 3600  -  total flux cleaned = -0.036018 Jy
! Component: 3650  -  total flux cleaned = -0.0361386 Jy
! Component: 3700  -  total flux cleaned = -0.0363183 Jy
! Component: 3750  -  total flux cleaned = -0.0363774 Jy
! Component: 3800  -  total flux cleaned = -0.0363778 Jy
! Component: 3850  -  total flux cleaned = -0.0366101 Jy
! Component: 3900  -  total flux cleaned = -0.0364365 Jy
! Component: 3950  -  total flux cleaned = -0.0365517 Jy
! Component: 4000  -  total flux cleaned = -0.0366657 Jy
! Component: 4050  -  total flux cleaned = -0.0367224 Jy
! Total flux subtracted in 4096 components = -0.0367789 Jy
! Clean residual min=-0.003250 max=0.003017 Jy/beam
! Clean residual mean=-0.000004 rms=0.001043 Jy/beam
! Combined flux in latest and established models = 3.29857 Jy
keep
! Adding 289 model components to the UV plane model.
! The established model now contains 346 components and 3.29857 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/g0/scr/pima/npcsb_uvs/J0555+3948_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.483 x 8.819 at -34.2 degrees (North through East)
! Clean map  min=-0.0099288  max=3.105 Jy/beam
! Writing clean map to FITS file: /g0/scr/pima/npcsb_uvs/J0555+3948_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 3.10497 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00103083 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.0995978 0.0995978 0.199196 0.398391 0.796782 1.59356 3.18713 6.37426 12.7485 25.497 50.9941
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.003 
print "peak=",int(1000*peak_flux)/1000
! peak= 3.104 
quit
! Quitting program
! Log file /g0/scr/pima/npcsb_uvs/J0555+3948_S_uvs.log closed on Wed Sep 25 00:09:34 2013