! Started logfile: /g0/scr/pima/npcsb_uvs/J0540+7519_S_uvs.log on Wed Sep 25 00:09:25 2013
obs /g0/scr/pima/npcsb_uvs/J0540+7519_S_uva.fits
! Reading UV FITS file: /g0/scr/pima/npcsb_uvs/J0540+7519_S_uva.fits
! AN table 1: 46 integrations on 21 of 21 possible baselines.
! Apparent sampling: 0.857143 visibilities/baseline/integration-bin.
! Found source: J0540+7519
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23693e+09        8e+06          1        8e+06
!  02        2  2.26693e+09        8e+06          1        8e+06
!  03        3  2.35693e+09        8e+06          1        8e+06
!  04        4  2.37693e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 3312 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsb_uvs/J0540+7519_S]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.990458Jy  sigma=2.470814
! Fit after  self-cal, rms=0.939820Jy  sigma=2.340701
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=8.308 mas, bmaj=9.969 mas, bpa=46.13 degrees
! Estimated noise=9.39849 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0.5, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0431522 Jy
! Component: 100  -  total flux cleaned = 0.0537802 Jy
! Total flux subtracted in 100 components = 0.0537802 Jy
! Clean residual min=-0.006485 max=0.007018 Jy/beam
! Clean residual mean=0.000013 rms=0.002216 Jy/beam
! Combined flux in latest and established models = 0.0537802 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 19 components and 0.0537802 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.081452Jy  sigma=0.176185
! Fit after  self-cal, rms=0.080841Jy  sigma=0.174544
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=9.625 mas, bmaj=11.5 mas, bpa=36.02 degrees
! Estimated noise=5.12609 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0126399 Jy
! Component: 100  -  total flux cleaned = 0.0204174 Jy
! Component: 150  -  total flux cleaned = 0.0261313 Jy
! Component: 200  -  total flux cleaned = 0.030432 Jy
! Total flux subtracted in 200 components = 0.030432 Jy
! Clean residual min=-0.006182 max=0.006460 Jy/beam
! Clean residual mean=0.000009 rms=0.002568 Jy/beam
! Combined flux in latest and established models = 0.0842122 Jy
! Performing phase self-cal
! Adding 83 model components to the UV plane model.
! The established model now contains 100 components and 0.0842122 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.078041Jy  sigma=0.169083
! Fit after  self-cal, rms=0.077541Jy  sigma=0.168466
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        1.15     KP        1.13     LA        0.80     
!   NL        1.28     OV        1.34     PT        0.87     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.15     KP        1.02     LA        0.84     
!   NL        1.21     OV        1.08     PT        0.85     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.37     FD        1.18     KP        1.14     LA        0.68     
!   NL        1.10     OV        1.04     PT        0.89     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.90     FD        1.15     KP        0.99     LA        0.63     
!   NL        1.07     OV        0.86     PT        0.82     
! 
! 
! Fit before self-cal, rms=0.077541Jy  sigma=0.168466
! Fit after  self-cal, rms=0.072041Jy  sigma=0.164500
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=9.856 mas, bmaj=12.09 mas, bpa=36.81 degrees
! Estimated noise=5.03535 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000484063 Jy
! Component: 100  -  total flux cleaned = 0.000681373 Jy
! Component: 150  -  total flux cleaned = 0.000779251 Jy
! Component: 200  -  total flux cleaned = 0.000837745 Jy
! Total flux subtracted in 200 components = 0.000837745 Jy
! Clean residual min=-0.003962 max=0.007009 Jy/beam
! Clean residual mean=-0.000000 rms=0.001604 Jy/beam
! Combined flux in latest and established models = 0.08505 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 114 components and 0.08505 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.072009Jy  sigma=0.164356
! Fit after  self-cal, rms=0.072386Jy  sigma=0.163744
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.072386Jy  sigma=0.163744
! Fit after  self-cal, rms=0.074022Jy  sigma=0.163620
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.861 mas, bmaj=12.24 mas, bpa=37.88 degrees
! Estimated noise=5.02152 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000328136 Jy
! Component: 100  -  total flux cleaned = -0.000196912 Jy
! Component: 150  -  total flux cleaned = -1.40735e-05 Jy
! Component: 200  -  total flux cleaned = 0.00013175 Jy
! Total flux subtracted in 200 components = 0.00013175 Jy
! Clean residual min=-0.003752 max=0.006077 Jy/beam
! Clean residual mean=0.000000 rms=0.001417 Jy/beam
! Combined flux in latest and established models = 0.0851817 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 123 components and 0.0851817 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.074001Jy  sigma=0.163569
! Fit after  self-cal, rms=0.074118Jy  sigma=0.163529
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-6, -48).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0051895 Jy
! Component: 100  -  total flux cleaned = 0.00670981 Jy
! Component: 150  -  total flux cleaned = 0.00717798 Jy
! Component: 200  -  total flux cleaned = 0.00797565 Jy
! Total flux subtracted in 200 components = 0.00797565 Jy
! Clean residual min=-0.003363 max=0.003058 Jy/beam
! Clean residual mean=0.000002 rms=0.000904 Jy/beam
! Combined flux in latest and established models = 0.0931574 Jy
! Performing phase self-cal
! Adding 57 model components to the UV plane model.
! The established model now contains 179 components and 0.0931574 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.073703Jy  sigma=0.162621
! Fit after  self-cal, rms=0.073410Jy  sigma=0.162383
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.073410Jy  sigma=0.162383
! Fit after  self-cal, rms=0.072083Jy  sigma=0.162299
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.884 mas, bmaj=12.29 mas, bpa=37.71 degrees
! Estimated noise=4.93539 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00233778 Jy
! Component: 100  -  total flux cleaned = 0.00272391 Jy
! Component: 150  -  total flux cleaned = 0.00293482 Jy
! Component: 200  -  total flux cleaned = 0.00310337 Jy
! Total flux subtracted in 200 components = 0.00310337 Jy
! Clean residual min=-0.002771 max=0.002957 Jy/beam
! Clean residual mean=-0.000001 rms=0.000770 Jy/beam
! Combined flux in latest and established models = 0.0962607 Jy
selfcal
! Performing phase self-cal
! Adding 53 model components to the UV plane model.
! The established model now contains 222 components and 0.0962607 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.071970Jy  sigma=0.162073
! Fit after  self-cal, rms=0.071885Jy  sigma=0.162014
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000580176 Jy
! Component: 100  -  total flux cleaned = 0.00064737 Jy
! Component: 150  -  total flux cleaned = 0.000821252 Jy
! Component: 200  -  total flux cleaned = 0.000948037 Jy
! Total flux subtracted in 200 components = 0.000948037 Jy
! Clean residual min=-0.002628 max=0.002855 Jy/beam
! Clean residual mean=-0.000000 rms=0.000726 Jy/beam
! Combined flux in latest and established models = 0.0972088 Jy
! Performing phase self-cal
! Adding 51 model components to the UV plane model.
! The established model now contains 260 components and 0.0972088 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.071848Jy  sigma=0.161945
! Fit after  self-cal, rms=0.071808Jy  sigma=0.161929
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.071808Jy  sigma=0.161929
! Fit after  self-cal, rms=0.070988Jy  sigma=0.161886
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=10.87 mas, bmaj=13.56 mas, bpa=34.23 degrees
! Estimated noise=4.97727 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000261621 Jy
! Component: 100  -  total flux cleaned = 0.000197355 Jy
! Component: 150  -  total flux cleaned = 0.000225847 Jy
! Component: 200  -  total flux cleaned = 0.000225786 Jy
! Total flux subtracted in 200 components = 0.000225786 Jy
! Clean residual min=-0.002484 max=0.002864 Jy/beam
! Clean residual mean=-0.000002 rms=0.000733 Jy/beam
! Combined flux in latest and established models = 0.0974346 Jy
selfcal
! Performing phase self-cal
! Adding 49 model components to the UV plane model.
! The established model now contains 298 components and 0.0974346 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.070964Jy  sigma=0.161840
! Fit after  self-cal, rms=0.070934Jy  sigma=0.161829
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000216865 Jy
! Component: 100  -  total flux cleaned = -0.000218586 Jy
! Component: 150  -  total flux cleaned = -0.000174191 Jy
! Component: 200  -  total flux cleaned = -0.000174454 Jy
! Total flux subtracted in 200 components = -0.000174454 Jy
! Clean residual min=-0.002412 max=0.002804 Jy/beam
! Clean residual mean=-0.000001 rms=0.000711 Jy/beam
! Combined flux in latest and established models = 0.0972601 Jy
! Performing phase self-cal
! Adding 51 model components to the UV plane model.
! The established model now contains 334 components and 0.0972601 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.070919Jy  sigma=0.161803
! Fit after  self-cal, rms=0.070914Jy  sigma=0.161799
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=9.886 mas, bmaj=12.31 mas, bpa=37.84 degrees
! Estimated noise=4.90475 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 9.886 x 12.31 at 37.84 degrees (North through East)
! Clean map  min=-0.0040351  max=0.059223 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.374 mas, bmaj=10.62 mas, bpa=48.51 degrees
! Estimated noise=9.44667 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0429982 Jy
! Component: 100  -  total flux cleaned = 0.0528939 Jy
! Component: 150  -  total flux cleaned = 0.0575341 Jy
! Component: 200  -  total flux cleaned = 0.0621326 Jy
! Total flux subtracted in 200 components = 0.0621326 Jy
! Clean residual min=-0.005983 max=0.006173 Jy/beam
! Clean residual mean=0.000010 rms=0.001945 Jy/beam
! Combined flux in latest and established models = 0.0621326 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 32 model components to the UV plane model.
! The established model now contains 32 components and 0.0621326 Jy
! Inverting map and beam 
! Estimated beam: bmin=9.886 mas, bmaj=12.31 mas, bpa=37.84 degrees
! Estimated noise=4.90475 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00833831 Jy
! Component: 100  -  total flux cleaned = 0.0126297 Jy
! Component: 150  -  total flux cleaned = 0.015242 Jy
! Component: 200  -  total flux cleaned = 0.0174276 Jy
! Total flux subtracted in 200 components = 0.0174276 Jy
! Clean residual min=-0.003820 max=0.003172 Jy/beam
! Clean residual mean=0.000007 rms=0.001273 Jy/beam
! Combined flux in latest and established models = 0.0795602 Jy
! Adding 76 model components to the UV plane model.
! The established model now contains 108 components and 0.0795602 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=10.87 mas, bmaj=13.56 mas, bpa=34.23 degrees
! Estimated noise=4.97727 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00248862 Jy
! Component: 100  -  total flux cleaned = 0.00435675 Jy
! Component: 150  -  total flux cleaned = 0.00597272 Jy
! Component: 200  -  total flux cleaned = 0.00745813 Jy
! Total flux subtracted in 200 components = 0.00745813 Jy
! Clean residual min=-0.003204 max=0.002907 Jy/beam
! Clean residual mean=0.000003 rms=0.001050 Jy/beam
! Combined flux in latest and established models = 0.0870184 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00130734 Jy
! Component: 100  -  total flux cleaned = 0.00246536 Jy
! Component: 150  -  total flux cleaned = 0.00349271 Jy
! Component: 200  -  total flux cleaned = 0.00436319 Jy
! Total flux subtracted in 200 components = 0.00436319 Jy
! Clean residual min=-0.002764 max=0.002422 Jy/beam
! Clean residual mean=0.000001 rms=0.000841 Jy/beam
! Combined flux in latest and established models = 0.0913815 Jy
! Adding 142 model components to the UV plane model.
! The established model now contains 235 components and 0.0913815 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=9.886 mas, bmaj=12.31 mas, bpa=37.84 degrees
! Estimated noise=4.90475 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000676154 Jy
! Component: 100  -  total flux cleaned = 0.00131423 Jy
! Component: 150  -  total flux cleaned = 0.00192228 Jy
! Component: 200  -  total flux cleaned = 0.00244813 Jy
! Total flux subtracted in 200 components = 0.00244813 Jy
! Clean residual min=-0.002509 max=0.002555 Jy/beam
! Clean residual mean=-0.000000 rms=0.000694 Jy/beam
! Combined flux in latest and established models = 0.0938297 Jy
selfcal
! Performing phase self-cal
! Adding 49 model components to the UV plane model.
! The established model now contains 265 components and 0.0938297 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.070917Jy  sigma=0.161826
! Fit after  self-cal, rms=0.070890Jy  sigma=0.161813
wmodel /g0/scr/pima/npcsb_uvs/J0540+7519_S_map.mod
! Writing 265 model components to file: /g0/scr/pima/npcsb_uvs/J0540+7519_S_map.mod
wobs /g0/scr/pima/npcsb_uvs/J0540+7519_S_uvs.fits
! Writing UV FITS file: /g0/scr/pima/npcsb_uvs/J0540+7519_S_uvs.fits
wwins /g0/scr/pima/npcsb_uvs/J0540+7519_S_map.win
! wwins: Wrote 2 windows to /g0/scr/pima/npcsb_uvs/J0540+7519_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000108006 Jy
! Component: 100  -  total flux cleaned = -0.000634503 Jy
! Component: 150  -  total flux cleaned = -0.000737068 Jy
! Component: 200  -  total flux cleaned = -0.000926399 Jy
! Component: 250  -  total flux cleaned = -0.00116153 Jy
! Component: 300  -  total flux cleaned = -0.00132869 Jy
! Component: 350  -  total flux cleaned = -0.00148771 Jy
! Component: 400  -  total flux cleaned = -0.00148787 Jy
! Component: 450  -  total flux cleaned = -0.00151344 Jy
! Component: 500  -  total flux cleaned = -0.00156087 Jy
! Component: 550  -  total flux cleaned = -0.00160672 Jy
! Component: 600  -  total flux cleaned = -0.00167374 Jy
! Component: 650  -  total flux cleaned = -0.00173826 Jy
! Component: 700  -  total flux cleaned = -0.00186416 Jy
! Component: 750  -  total flux cleaned = -0.0019255 Jy
! Component: 800  -  total flux cleaned = -0.00200589 Jy
! Component: 850  -  total flux cleaned = -0.00206451 Jy
! Component: 900  -  total flux cleaned = -0.00202621 Jy
! Component: 950  -  total flux cleaned = -0.0019884 Jy
! Component: 1000  -  total flux cleaned = -0.00187714 Jy
! Component: 1050  -  total flux cleaned = -0.00171301 Jy
! Component: 1100  -  total flux cleaned = -0.00162351 Jy
! Component: 1150  -  total flux cleaned = -0.00151735 Jy
! Component: 1200  -  total flux cleaned = -0.00137784 Jy
! Component: 1250  -  total flux cleaned = -0.00127466 Jy
! Component: 1300  -  total flux cleaned = -0.00120648 Jy
! Component: 1350  -  total flux cleaned = -0.00108912 Jy
! Component: 1400  -  total flux cleaned = -0.00100639 Jy
! Component: 1450  -  total flux cleaned = -0.000940781 Jy
! Component: 1500  -  total flux cleaned = -0.000811422 Jy
! Component: 1550  -  total flux cleaned = -0.000699405 Jy
! Component: 1600  -  total flux cleaned = -0.00058833 Jy
! Component: 1650  -  total flux cleaned = -0.000462394 Jy
! Component: 1700  -  total flux cleaned = -0.000368577 Jy
! Component: 1750  -  total flux cleaned = -0.000275516 Jy
! Component: 1800  -  total flux cleaned = -0.000183108 Jy
! Component: 1850  -  total flux cleaned = -0.000106621 Jy
! Component: 1900  -  total flux cleaned = -4.57921e-05 Jy
! Component: 1950  -  total flux cleaned = 2.99024e-05 Jy
! Component: 2000  -  total flux cleaned = 7.5215e-05 Jy
! Component: 2050  -  total flux cleaned = 0.000150344 Jy
! Component: 2100  -  total flux cleaned = 0.000210135 Jy
! Component: 2150  -  total flux cleaned = 0.000254733 Jy
! Component: 2200  -  total flux cleaned = 0.000314041 Jy
! Component: 2250  -  total flux cleaned = 0.000373283 Jy
! Component: 2300  -  total flux cleaned = 0.000432172 Jy
! Component: 2350  -  total flux cleaned = 0.000490983 Jy
! Component: 2400  -  total flux cleaned = 0.000549663 Jy
! Component: 2450  -  total flux cleaned = 0.000622713 Jy
! Component: 2500  -  total flux cleaned = 0.000651872 Jy
! Component: 2550  -  total flux cleaned = 0.000753871 Jy
! Component: 2600  -  total flux cleaned = 0.000855778 Jy
! Component: 2650  -  total flux cleaned = 0.000957724 Jy
! Component: 2700  -  total flux cleaned = 0.00105971 Jy
! Component: 2750  -  total flux cleaned = 0.00122009 Jy
! Component: 2800  -  total flux cleaned = 0.00132239 Jy
! Component: 2850  -  total flux cleaned = 0.00148327 Jy
! Component: 2900  -  total flux cleaned = 0.00161502 Jy
! Component: 2950  -  total flux cleaned = 0.00177632 Jy
! Component: 3000  -  total flux cleaned = 0.00187912 Jy
! Component: 3050  -  total flux cleaned = 0.0019968 Jy
! Component: 3100  -  total flux cleaned = 0.00209992 Jy
! Component: 3150  -  total flux cleaned = 0.00220359 Jy
! Component: 3200  -  total flux cleaned = 0.00227786 Jy
! Component: 3250  -  total flux cleaned = 0.00233734 Jy
! Component: 3300  -  total flux cleaned = 0.00244201 Jy
! Component: 3350  -  total flux cleaned = 0.00251711 Jy
! Component: 3400  -  total flux cleaned = 0.0025474 Jy
! Component: 3450  -  total flux cleaned = 0.00254748 Jy
! Component: 3500  -  total flux cleaned = 0.0026083 Jy
! Component: 3550  -  total flux cleaned = 0.00265416 Jy
! Component: 3600  -  total flux cleaned = 0.002685 Jy
! Component: 3650  -  total flux cleaned = 0.00270056 Jy
! Component: 3700  -  total flux cleaned = 0.00274734 Jy
! Component: 3750  -  total flux cleaned = 0.0027161 Jy
! Component: 3800  -  total flux cleaned = 0.00277906 Jy
! Component: 3850  -  total flux cleaned = 0.00277909 Jy
! Component: 3900  -  total flux cleaned = 0.00282688 Jy
! Component: 3950  -  total flux cleaned = 0.00284312 Jy
! Component: 4000  -  total flux cleaned = 0.00284324 Jy
! Component: 4050  -  total flux cleaned = 0.00285935 Jy
! Total flux subtracted in 4096 components = 0.00289196 Jy
! Clean residual min=-0.001000 max=0.001002 Jy/beam
! Clean residual mean=0.000006 rms=0.000312 Jy/beam
! Combined flux in latest and established models = 0.0967217 Jy
keep
! Adding 252 model components to the UV plane model.
! The established model now contains 517 components and 0.0967217 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/g0/scr/pima/npcsb_uvs/J0540+7519_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 9.886 x 12.31 at 37.84 degrees (North through East)
! Clean map  min=-0.0038809  max=0.058763 Jy/beam
! Writing clean map to FITS file: /g0/scr/pima/npcsb_uvs/J0540+7519_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0587625 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000304019 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.55211 1.55211 3.10421 6.20843 12.4169 24.8337 49.6674 99.3348
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0009 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.058 
quit
! Quitting program
! Log file /g0/scr/pima/npcsb_uvs/J0540+7519_S_uvs.log closed on Wed Sep 25 00:09:29 2013