! Started logfile: /g0/scr/pima/npcsb_uvs/J0525+8737_S_uvs.log on Wed Sep 25 00:09:20 2013
obs /g0/scr/pima/npcsb_uvs/J0525+8737_S_uva.fits
! Reading UV FITS file: /g0/scr/pima/npcsb_uvs/J0525+8737_S_uva.fits
! AN table 1: 45 integrations on 15 of 15 possible baselines.
! Apparent sampling: 0.533333 visibilities/baseline/integration-bin.
! Found source: J0525+8737
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23693e+09        8e+06          1        8e+06
!  02        2  2.26693e+09        8e+06          1        8e+06
!  03        3  2.35693e+09        8e+06          1        8e+06
!  04        4  2.37693e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 1440 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsb_uvs/J0525+8737_S]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 90 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 90 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 90 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 90 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.964315Jy  sigma=2.032959
! Fit after  self-cal, rms=0.901525Jy  sigma=1.812617
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=19.61 mas, bmaj=52.86 mas, bpa=15.74 degrees
! Estimated noise=13.3698 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0729249 Jy
! Component: 100  -  total flux cleaned = 0.0928888 Jy
! Total flux subtracted in 100 components = 0.0928888 Jy
! Clean residual min=-0.009969 max=0.010467 Jy/beam
! Clean residual mean=-0.000131 rms=0.004204 Jy/beam
! Combined flux in latest and established models = 0.0928888 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 22 components and 0.0928888 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.092127Jy  sigma=0.160408
! Fit after  self-cal, rms=0.092081Jy  sigma=0.160249
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=21.45 mas, bmaj=47.87 mas, bpa=8.928 degrees
! Estimated noise=10.9979 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00689069 Jy
! Component: 100  -  total flux cleaned = 0.00890204 Jy
! Component: 150  -  total flux cleaned = 0.0109047 Jy
! Component: 200  -  total flux cleaned = 0.0124488 Jy
! Total flux subtracted in 200 components = 0.0124488 Jy
! Clean residual min=-0.004072 max=0.004083 Jy/beam
! Clean residual mean=-0.000043 rms=0.001916 Jy/beam
! Combined flux in latest and established models = 0.105338 Jy
! Performing phase self-cal
! Adding 104 model components to the UV plane model.
! The established model now contains 126 components and 0.105338 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.088093Jy  sigma=0.154142
! Fit after  self-cal, rms=0.087227Jy  sigma=0.153531
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        0.98     KP        1.11     LA        1.08     
!   OV        1.00*    PT        0.94     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.04     KP        0.96     LA        1.02     
!   OV        1.00*    PT        0.97     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.08     KP        1.07     LA        0.95     
!   OV        1.00*    PT        0.95     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.05     KP        0.97     LA        0.75     
!   OV        1.00*    PT        0.90     
! 
! 
! Fit before self-cal, rms=0.087227Jy  sigma=0.153531
! Fit after  self-cal, rms=0.079405Jy  sigma=0.151427
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=21.85 mas, bmaj=47.78 mas, bpa=8.636 degrees
! Estimated noise=10.7638 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000167512 Jy
! Component: 100  -  total flux cleaned = -0.000885012 Jy
! Component: 150  -  total flux cleaned = -0.000886834 Jy
! Component: 200  -  total flux cleaned = -0.000812116 Jy
! Total flux subtracted in 200 components = -0.000812116 Jy
! Clean residual min=-0.001316 max=0.001342 Jy/beam
! Clean residual mean=0.000006 rms=0.000413 Jy/beam
! Combined flux in latest and established models = 0.104525 Jy
! Performing phase self-cal
! Adding 57 model components to the UV plane model.
! The established model now contains 183 components and 0.104525 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.079275Jy  sigma=0.151146
! Fit after  self-cal, rms=0.079083Jy  sigma=0.150900
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.079083Jy  sigma=0.150900
! Fit after  self-cal, rms=0.078419Jy  sigma=0.150868
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=21.86 mas, bmaj=47.78 mas, bpa=8.694 degrees
! Estimated noise=10.6714 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000263748 Jy
! Component: 100  -  total flux cleaned = -0.000203581 Jy
! Component: 150  -  total flux cleaned = -0.00026273 Jy
! Component: 200  -  total flux cleaned = -0.000261762 Jy
! Total flux subtracted in 200 components = -0.000261762 Jy
! Clean residual min=-0.001084 max=0.001083 Jy/beam
! Clean residual mean=0.000002 rms=0.000350 Jy/beam
! Combined flux in latest and established models = 0.104264 Jy
selfcal
! Performing phase self-cal
! Adding 57 model components to the UV plane model.
! The established model now contains 227 components and 0.104264 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.078353Jy  sigma=0.150728
! Fit after  self-cal, rms=0.078217Jy  sigma=0.150567
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00115397 Jy
! Component: 100  -  total flux cleaned = 0.00111011 Jy
! Component: 150  -  total flux cleaned = 0.000973908 Jy
! Component: 200  -  total flux cleaned = 0.00083881 Jy
! Total flux subtracted in 200 components = 0.00083881 Jy
! Clean residual min=-0.000778 max=0.000776 Jy/beam
! Clean residual mean=0.000012 rms=0.000287 Jy/beam
! Combined flux in latest and established models = 0.105103 Jy
! Performing phase self-cal
! Adding 51 model components to the UV plane model.
! The established model now contains 277 components and 0.105103 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.078177Jy  sigma=0.150478
! Fit after  self-cal, rms=0.078170Jy  sigma=0.150470
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.078170Jy  sigma=0.150470
! Fit after  self-cal, rms=0.077567Jy  sigma=0.150452
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=21.8 mas, bmaj=47.77 mas, bpa=8.905 degrees
! Estimated noise=10.5981 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000120295 Jy
! Component: 100  -  total flux cleaned = -7.98796e-05 Jy
! Component: 150  -  total flux cleaned = 3.84799e-05 Jy
! Component: 200  -  total flux cleaned = 0.000162834 Jy
! Total flux subtracted in 200 components = 0.000162834 Jy
! Clean residual min=-0.000697 max=0.000701 Jy/beam
! Clean residual mean=0.000006 rms=0.000244 Jy/beam
! Combined flux in latest and established models = 0.105265 Jy
selfcal
! Performing phase self-cal
! Adding 92 model components to the UV plane model.
! The established model now contains 367 components and 0.105265 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.077528Jy  sigma=0.150388
! Fit after  self-cal, rms=0.077532Jy  sigma=0.150383
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000362115 Jy
! Component: 100  -  total flux cleaned = 0.000297255 Jy
! Component: 150  -  total flux cleaned = 9.70536e-05 Jy
! Component: 200  -  total flux cleaned = -7.67857e-05 Jy
! Total flux subtracted in 200 components = -7.67857e-05 Jy
! Clean residual min=-0.000594 max=0.000586 Jy/beam
! Clean residual mean=0.000009 rms=0.000214 Jy/beam
! Combined flux in latest and established models = 0.105189 Jy
! Performing phase self-cal
! Adding 59 model components to the UV plane model.
! The established model now contains 418 components and 0.105189 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.077511Jy  sigma=0.150334
! Fit after  self-cal, rms=0.077505Jy  sigma=0.150331
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.077505Jy  sigma=0.150331
! Fit after  self-cal, rms=0.076873Jy  sigma=0.150316
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=22.01 mas, bmaj=47.66 mas, bpa=9.074 degrees
! Estimated noise=10.5148 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000319303 Jy
! Component: 100  -  total flux cleaned = -0.000187478 Jy
! Component: 150  -  total flux cleaned = -2.23775e-05 Jy
! Component: 200  -  total flux cleaned = 0.000149015 Jy
! Total flux subtracted in 200 components = 0.000149015 Jy
! Clean residual min=-0.000604 max=0.000583 Jy/beam
! Clean residual mean=0.000006 rms=0.000224 Jy/beam
! Combined flux in latest and established models = 0.105338 Jy
selfcal
! Performing phase self-cal
! Adding 79 model components to the UV plane model.
! The established model now contains 484 components and 0.105338 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.076841Jy  sigma=0.150279
! Fit after  self-cal, rms=0.076840Jy  sigma=0.150276
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000384024 Jy
! Component: 100  -  total flux cleaned = 0.000358673 Jy
! Component: 150  -  total flux cleaned = 0.000227911 Jy
! Component: 200  -  total flux cleaned = 8.31468e-06 Jy
! Total flux subtracted in 200 components = 8.31468e-06 Jy
! Clean residual min=-0.000458 max=0.000464 Jy/beam
! Clean residual mean=0.000003 rms=0.000168 Jy/beam
! Combined flux in latest and established models = 0.105346 Jy
! Performing phase self-cal
! Adding 49 model components to the UV plane model.
! The established model now contains 525 components and 0.105346 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.076826Jy  sigma=0.150244
! Fit after  self-cal, rms=0.076820Jy  sigma=0.150242
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=21.73 mas, bmaj=47.76 mas, bpa=9.092 degrees
! Estimated noise=10.5206 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 21.73 x 47.76 at 9.092 degrees (North through East)
! Clean map  min=-0.0073053  max=0.084367 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=19.88 mas, bmaj=52.78 mas, bpa=16.21 degrees
! Estimated noise=12.7484 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0681144 Jy
! Component: 100  -  total flux cleaned = 0.0848755 Jy
! Component: 150  -  total flux cleaned = 0.0909347 Jy
! Component: 200  -  total flux cleaned = 0.0971286 Jy
! Total flux subtracted in 200 components = 0.0971286 Jy
! Clean residual min=-0.011600 max=0.011728 Jy/beam
! Clean residual mean=-0.000045 rms=0.003452 Jy/beam
! Combined flux in latest and established models = 0.0971287 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 50 model components to the UV plane model.
! The established model now contains 50 components and 0.0971287 Jy
! Inverting map and beam 
! Estimated beam: bmin=21.73 mas, bmaj=47.76 mas, bpa=9.092 degrees
! Estimated noise=10.5206 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00248297 Jy
! Component: 100  -  total flux cleaned = -0.00251041 Jy
! Component: 150  -  total flux cleaned = -0.00283997 Jy
! Component: 200  -  total flux cleaned = -0.00269405 Jy
! Total flux subtracted in 200 components = -0.00269405 Jy
! Clean residual min=-0.002318 max=0.002369 Jy/beam
! Clean residual mean=-0.000035 rms=0.001042 Jy/beam
! Combined flux in latest and established models = 0.0944346 Jy
! Adding 121 model components to the UV plane model.
! The established model now contains 171 components and 0.0944346 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=22.01 mas, bmaj=47.66 mas, bpa=9.074 degrees
! Estimated noise=10.5148 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000641516 Jy
! Component: 100  -  total flux cleaned = -0.00162871 Jy
! Component: 150  -  total flux cleaned = -0.00242692 Jy
! Component: 200  -  total flux cleaned = -0.00297382 Jy
! Total flux subtracted in 200 components = -0.00297382 Jy
! Clean residual min=-0.000842 max=0.000829 Jy/beam
! Clean residual mean=-0.000007 rms=0.000354 Jy/beam
! Combined flux in latest and established models = 0.0914608 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000415356 Jy
! Component: 100  -  total flux cleaned = -0.000851144 Jy
! Component: 150  -  total flux cleaned = -0.00125753 Jy
! Component: 200  -  total flux cleaned = -0.00156965 Jy
! Total flux subtracted in 200 components = -0.00156965 Jy
! Clean residual min=-0.001105 max=0.001066 Jy/beam
! Clean residual mean=-0.000003 rms=0.000400 Jy/beam
! Combined flux in latest and established models = 0.0898912 Jy
! Adding 126 model components to the UV plane model.
! The established model now contains 288 components and 0.0898911 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=21.73 mas, bmaj=47.76 mas, bpa=9.092 degrees
! Estimated noise=10.5206 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000211265 Jy
! Component: 100  -  total flux cleaned = 0.000176969 Jy
! Component: 150  -  total flux cleaned = 8.24148e-05 Jy
! Component: 200  -  total flux cleaned = -9.54737e-05 Jy
! Total flux subtracted in 200 components = -9.54737e-05 Jy
! Clean residual min=-0.000487 max=0.000487 Jy/beam
! Clean residual mean=-0.000001 rms=0.000202 Jy/beam
! Combined flux in latest and established models = 0.0897957 Jy
selfcal
! Performing phase self-cal
! Adding 68 model components to the UV plane model.
! The established model now contains 347 components and 0.0897957 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.076828Jy  sigma=0.150234
! Fit after  self-cal, rms=0.076834Jy  sigma=0.150196
wmodel /g0/scr/pima/npcsb_uvs/J0525+8737_S_map.mod
! Writing 347 model components to file: /g0/scr/pima/npcsb_uvs/J0525+8737_S_map.mod
wobs /g0/scr/pima/npcsb_uvs/J0525+8737_S_uvs.fits
! Writing UV FITS file: /g0/scr/pima/npcsb_uvs/J0525+8737_S_uvs.fits
wwins /g0/scr/pima/npcsb_uvs/J0525+8737_S_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
![Exited script file: /home/lpetrov/bin/01_muppet]
! 
wmap "/g0/scr/pima/npcsb_uvs/J0525+8737_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 21.73 x 47.76 at 9.092 degrees (North through East)
! Clean map  min=-0.0091347  max=0.075183 Jy/beam
! Writing clean map to FITS file: /g0/scr/pima/npcsb_uvs/J0525+8737_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.075183 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000197894 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.789651 0.789651 1.5793 3.1586 6.31721 12.6344 25.2688 50.5376
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0005 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.075 
quit
! Quitting program
! Log file /g0/scr/pima/npcsb_uvs/J0525+8737_S_uvs.log closed on Wed Sep 25 00:09:24 2013