! Started logfile: /g0/scr/pima/npcsb_uvs/J0458+7615_S_uvs.log on Wed Sep 25 00:09:16 2013
obs /g0/scr/pima/npcsb_uvs/J0458+7615_S_uva.fits
! Reading UV FITS file: /g0/scr/pima/npcsb_uvs/J0458+7615_S_uva.fits
! AN table 1: 46 integrations on 15 of 15 possible baselines.
! Apparent sampling: 0.733333 visibilities/baseline/integration-bin.
! Found source: J0458+7615
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23693e+09        8e+06          1        8e+06
!  02        2  2.26693e+09        8e+06          1        8e+06
!  03        3  2.35693e+09        8e+06          1        8e+06
!  04        4  2.37693e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 2024 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsb_uvs/J0458+7615_S]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.030730Jy  sigma=1.951708
! Fit after  self-cal, rms=0.883193Jy  sigma=1.695928
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=11.45 mas, bmaj=41.87 mas, bpa=28.63 degrees
! Estimated noise=12.5584 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0908634 Jy
! Component: 100  -  total flux cleaned = 0.114396 Jy
! Total flux subtracted in 100 components = 0.114396 Jy
! Clean residual min=-0.013163 max=0.013222 Jy/beam
! Clean residual mean=0.000032 rms=0.004949 Jy/beam
! Combined flux in latest and established models = 0.114396 Jy
! Performing phase self-cal
! Adding 38 model components to the UV plane model.
! The established model now contains 38 components and 0.114396 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.100423Jy  sigma=0.171028
! Fit after  self-cal, rms=0.099664Jy  sigma=0.169608
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=12.19 mas, bmaj=41.3 mas, bpa=26.77 degrees
! Estimated noise=8.87133 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00809389 Jy
! Component: 100  -  total flux cleaned = 0.00614513 Jy
! Component: 150  -  total flux cleaned = 0.00690449 Jy
! Component: 200  -  total flux cleaned = 0.00625737 Jy
! Total flux subtracted in 200 components = 0.00625737 Jy
! Clean residual min=-0.002942 max=0.002949 Jy/beam
! Clean residual mean=0.000011 rms=0.001301 Jy/beam
! Combined flux in latest and established models = 0.120653 Jy
! Performing phase self-cal
! Adding 62 model components to the UV plane model.
! The established model now contains 99 components and 0.120653 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.095954Jy  sigma=0.164284
! Fit after  self-cal, rms=0.095590Jy  sigma=0.163951
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.05     KP        1.01     LA        1.04     
!   OV        1.00     PT        1.01     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        0.94     KP        0.93     LA        1.08     
!   OV        1.01     PT        0.97     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.06     KP        0.99     LA        0.87     
!   OV        1.12     PT        1.10     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.04     KP        0.93     LA        0.76     
!   OV        0.95     PT        0.88     
! 
! 
! Fit before self-cal, rms=0.095590Jy  sigma=0.163951
! Fit after  self-cal, rms=0.087596Jy  sigma=0.161614
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=12.36 mas, bmaj=40.65 mas, bpa=26.49 degrees
! Estimated noise=8.69006 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00178637 Jy
! Component: 100  -  total flux cleaned = 0.00219306 Jy
! Component: 150  -  total flux cleaned = 0.00226658 Jy
! Component: 200  -  total flux cleaned = 0.00186098 Jy
! Total flux subtracted in 200 components = 0.00186098 Jy
! Clean residual min=-0.001092 max=0.001110 Jy/beam
! Clean residual mean=-0.000000 rms=0.000425 Jy/beam
! Combined flux in latest and established models = 0.122514 Jy
! Performing phase self-cal
! Adding 72 model components to the UV plane model.
! The established model now contains 171 components and 0.122514 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.087413Jy  sigma=0.161232
! Fit after  self-cal, rms=0.087297Jy  sigma=0.161110
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.087297Jy  sigma=0.161110
! Fit after  self-cal, rms=0.087207Jy  sigma=0.161097
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=12.36 mas, bmaj=40.63 mas, bpa=26.49 degrees
! Estimated noise=8.68026 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000380599 Jy
! Component: 100  -  total flux cleaned = 0.000257812 Jy
! Component: 150  -  total flux cleaned = 2.37847e-05 Jy
! Component: 200  -  total flux cleaned = -0.000431778 Jy
! Total flux subtracted in 200 components = -0.000431778 Jy
! Clean residual min=-0.000941 max=0.000942 Jy/beam
! Clean residual mean=0.000001 rms=0.000370 Jy/beam
! Combined flux in latest and established models = 0.122083 Jy
selfcal
! Performing phase self-cal
! Adding 82 model components to the UV plane model.
! The established model now contains 244 components and 0.122083 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.087128Jy  sigma=0.160971
! Fit after  self-cal, rms=0.087118Jy  sigma=0.160959
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000400306 Jy
! Component: 100  -  total flux cleaned = -0.000912034 Jy
! Component: 150  -  total flux cleaned = -0.00117752 Jy
! Component: 200  -  total flux cleaned = -0.00139822 Jy
! Total flux subtracted in 200 components = -0.00139822 Jy
! Clean residual min=-0.000732 max=0.000738 Jy/beam
! Clean residual mean=0.000001 rms=0.000286 Jy/beam
! Combined flux in latest and established models = 0.120684 Jy
! Performing phase self-cal
! Adding 60 model components to the UV plane model.
! The established model now contains 290 components and 0.120684 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.087071Jy  sigma=0.160886
! Fit after  self-cal, rms=0.087072Jy  sigma=0.160881
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.087072Jy  sigma=0.160881
! Fit after  self-cal, rms=0.086927Jy  sigma=0.160840
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=12.34 mas, bmaj=40.69 mas, bpa=26.53 degrees
! Estimated noise=8.66021 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00050898 Jy
! Component: 100  -  total flux cleaned = -0.000814299 Jy
! Component: 150  -  total flux cleaned = -0.00102367 Jy
! Component: 200  -  total flux cleaned = -0.00122925 Jy
! Total flux subtracted in 200 components = -0.00122925 Jy
! Clean residual min=-0.000680 max=0.000689 Jy/beam
! Clean residual mean=0.000000 rms=0.000254 Jy/beam
! Combined flux in latest and established models = 0.119455 Jy
selfcal
! Performing phase self-cal
! Adding 61 model components to the UV plane model.
! The established model now contains 331 components and 0.119455 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.086884Jy  sigma=0.160789
! Fit after  self-cal, rms=0.086886Jy  sigma=0.160785
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000467418 Jy
! Component: 100  -  total flux cleaned = -0.000850846 Jy
! Component: 150  -  total flux cleaned = -0.00101995 Jy
! Component: 200  -  total flux cleaned = -0.0010548 Jy
! Total flux subtracted in 200 components = -0.0010548 Jy
! Clean residual min=-0.000560 max=0.000560 Jy/beam
! Clean residual mean=0.000000 rms=0.000204 Jy/beam
! Combined flux in latest and established models = 0.1184 Jy
! Performing phase self-cal
! Adding 53 model components to the UV plane model.
! The established model now contains 372 components and 0.1184 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.086860Jy  sigma=0.160744
! Fit after  self-cal, rms=0.086864Jy  sigma=0.160742
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.086864Jy  sigma=0.160742
! Fit after  self-cal, rms=0.086720Jy  sigma=0.160704
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=13.02 mas, bmaj=39.99 mas, bpa=26.25 degrees
! Estimated noise=8.68802 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000667422 Jy
! Component: 100  -  total flux cleaned = -0.000803217 Jy
! Component: 150  -  total flux cleaned = -0.000933993 Jy
! Component: 200  -  total flux cleaned = -0.000868219 Jy
! Total flux subtracted in 200 components = -0.000868219 Jy
! Clean residual min=-0.000547 max=0.000552 Jy/beam
! Clean residual mean=0.000000 rms=0.000200 Jy/beam
! Combined flux in latest and established models = 0.117532 Jy
selfcal
! Performing phase self-cal
! Adding 56 model components to the UV plane model.
! The established model now contains 416 components and 0.117532 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.086691Jy  sigma=0.160679
! Fit after  self-cal, rms=0.086694Jy  sigma=0.160677
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00050947 Jy
! Component: 100  -  total flux cleaned = -0.000621126 Jy
! Component: 150  -  total flux cleaned = -0.000701535 Jy
! Component: 200  -  total flux cleaned = -0.000808489 Jy
! Total flux subtracted in 200 components = -0.000808489 Jy
! Clean residual min=-0.000445 max=0.000439 Jy/beam
! Clean residual mean=-0.000000 rms=0.000164 Jy/beam
! Combined flux in latest and established models = 0.116724 Jy
! Performing phase self-cal
! Adding 61 model components to the UV plane model.
! The established model now contains 459 components and 0.116724 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.086677Jy  sigma=0.160650
! Fit after  self-cal, rms=0.086678Jy  sigma=0.160649
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=12.31 mas, bmaj=40.75 mas, bpa=26.57 degrees
! Estimated noise=8.64329 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 12.31 x 40.75 at 26.57 degrees (North through East)
! Clean map  min=-0.0067979  max=0.10275 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=11.58 mas, bmaj=40.79 mas, bpa=28.28 degrees
! Estimated noise=12.0703 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.086718 Jy
! Component: 100  -  total flux cleaned = 0.107361 Jy
! Component: 150  -  total flux cleaned = 0.117314 Jy
! Component: 200  -  total flux cleaned = 0.118815 Jy
! Total flux subtracted in 200 components = 0.118815 Jy
! Clean residual min=-0.005281 max=0.005259 Jy/beam
! Clean residual mean=0.000016 rms=0.002151 Jy/beam
! Combined flux in latest and established models = 0.118815 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 62 model components to the UV plane model.
! The established model now contains 62 components and 0.118815 Jy
! Inverting map and beam 
! Estimated beam: bmin=12.31 mas, bmaj=40.75 mas, bpa=26.57 degrees
! Estimated noise=8.64329 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00208039 Jy
! Component: 100  -  total flux cleaned = -0.00345959 Jy
! Component: 150  -  total flux cleaned = -0.00331042 Jy
! Component: 200  -  total flux cleaned = -0.00343754 Jy
! Total flux subtracted in 200 components = -0.00343754 Jy
! Clean residual min=-0.001967 max=0.001992 Jy/beam
! Clean residual mean=0.000009 rms=0.000874 Jy/beam
! Combined flux in latest and established models = 0.115377 Jy
! Adding 79 model components to the UV plane model.
! The established model now contains 140 components and 0.115377 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=13.02 mas, bmaj=39.99 mas, bpa=26.25 degrees
! Estimated noise=8.68802 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000328074 Jy
! Component: 100  -  total flux cleaned = -0.00064759 Jy
! Component: 150  -  total flux cleaned = -0.000897718 Jy
! Component: 200  -  total flux cleaned = -0.00114032 Jy
! Total flux subtracted in 200 components = -0.00114032 Jy
! Clean residual min=-0.001348 max=0.001332 Jy/beam
! Clean residual mean=0.000006 rms=0.000559 Jy/beam
! Combined flux in latest and established models = 0.114237 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000241634 Jy
! Component: 100  -  total flux cleaned = -0.000401456 Jy
! Component: 150  -  total flux cleaned = -0.000483881 Jy
! Component: 200  -  total flux cleaned = -0.000480741 Jy
! Total flux subtracted in 200 components = -0.000480741 Jy
! Clean residual min=-0.001421 max=0.001428 Jy/beam
! Clean residual mean=0.000003 rms=0.000525 Jy/beam
! Combined flux in latest and established models = 0.113756 Jy
! Adding 109 model components to the UV plane model.
! The established model now contains 244 components and 0.113756 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=12.31 mas, bmaj=40.75 mas, bpa=26.57 degrees
! Estimated noise=8.64329 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.15302e-05 Jy
! Component: 100  -  total flux cleaned = 6.37156e-05 Jy
! Component: 150  -  total flux cleaned = 0.000114183 Jy
! Component: 200  -  total flux cleaned = -0.000154783 Jy
! Total flux subtracted in 200 components = -0.000154783 Jy
! Clean residual min=-0.000624 max=0.000623 Jy/beam
! Clean residual mean=0.000003 rms=0.000264 Jy/beam
! Combined flux in latest and established models = 0.113602 Jy
selfcal
! Performing phase self-cal
! Adding 83 model components to the UV plane model.
! The established model now contains 327 components and 0.113602 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.086740Jy  sigma=0.160771
! Fit after  self-cal, rms=0.086744Jy  sigma=0.160758
wmodel /g0/scr/pima/npcsb_uvs/J0458+7615_S_map.mod
! Writing 327 model components to file: /g0/scr/pima/npcsb_uvs/J0458+7615_S_map.mod
wobs /g0/scr/pima/npcsb_uvs/J0458+7615_S_uvs.fits
! Writing UV FITS file: /g0/scr/pima/npcsb_uvs/J0458+7615_S_uvs.fits
wwins /g0/scr/pima/npcsb_uvs/J0458+7615_S_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
![Exited script file: /home/lpetrov/bin/01_muppet]
! 
wmap "/g0/scr/pima/npcsb_uvs/J0458+7615_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 12.31 x 40.75 at 26.57 degrees (North through East)
! Clean map  min=-0.0053878  max=0.098537 Jy/beam
! Writing clean map to FITS file: /g0/scr/pima/npcsb_uvs/J0458+7615_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0985369 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00025161 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.766037 0.766037 1.53207 3.06415 6.1283 12.2566 24.5132 49.0264 98.0528
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0007 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.098 
quit
! Quitting program
! Log file /g0/scr/pima/npcsb_uvs/J0458+7615_S_uvs.log closed on Wed Sep 25 00:09:20 2013