! Started logfile: /g0/scr/pima/npcsb_uvs/J0449+1121_X_uvs.log on Wed Sep 25 00:03:57 2013
obs /g0/scr/pima/npcsb_uvs/J0449+1121_X_uva.fits
! Reading UV FITS file: /g0/scr/pima/npcsb_uvs/J0449+1121_X_uva.fits
! AN table 1: 19 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.912281 visibilities/baseline/integration-bin.
! Found source: J0449+1121
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.40993e+09        8e+06          1        8e+06
!  02        2  8.47993e+09        8e+06          1        8e+06
!  03        3  8.79493e+09        8e+06          1        8e+06
!  04        4  8.89993e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 3120 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.2 
print "taper_size =",taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsb_uvs/J0449+1121_X]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.635064Jy  sigma=3.884990
! Fit after  self-cal, rms=0.426558Jy  sigma=1.011893
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7177 mas, bmaj=1.832 mas, bpa=3.985 degrees
! Estimated noise=8.56866 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.951227 Jy
! Component: 100  -  total flux cleaned = 1.19604 Jy
! Total flux subtracted in 100 components = 1.19604 Jy
! Clean residual min=-0.063636 max=0.139998 Jy/beam
! Clean residual mean=-0.000005 rms=0.018834 Jy/beam
! Combined flux in latest and established models = 1.19604 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 1.19604 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.317977Jy  sigma=0.749337
! Fit after  self-cal, rms=0.317363Jy  sigma=0.748382
! Inverting map 
! Added new window around map position (1.8, 0.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.140973 Jy
! Component: 100  -  total flux cleaned = 0.221918 Jy
! Total flux subtracted in 100 components = 0.221918 Jy
! Clean residual min=-0.049484 max=0.098103 Jy/beam
! Clean residual mean=-0.000005 rms=0.012320 Jy/beam
! Combined flux in latest and established models = 1.41796 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 11 components and 1.41796 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.224730Jy  sigma=0.523430
! Fit after  self-cal, rms=0.217128Jy  sigma=0.505948
! Inverting map 
! Added new window around map position (-2, -0.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0761062 Jy
! Component: 100  -  total flux cleaned = 0.123248 Jy
! Total flux subtracted in 100 components = 0.123248 Jy
! Clean residual min=-0.042098 max=0.039674 Jy/beam
! Clean residual mean=-0.000005 rms=0.008628 Jy/beam
! Combined flux in latest and established models = 1.54121 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 25 components and 1.54121 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.176499Jy  sigma=0.405007
! Fit after  self-cal, rms=0.175841Jy  sigma=0.403367
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8865 mas, bmaj=2.08 mas, bpa=2.576 degrees
! Estimated noise=5.63985 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0619185 Jy
! Component: 100  -  total flux cleaned = 0.104232 Jy
! Component: 150  -  total flux cleaned = 0.135953 Jy
! Component: 200  -  total flux cleaned = 0.160236 Jy
! Total flux subtracted in 200 components = 0.160236 Jy
! Clean residual min=-0.048170 max=0.037973 Jy/beam
! Clean residual mean=-0.000001 rms=0.009266 Jy/beam
! Combined flux in latest and established models = 1.70145 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 49 components and 1.70145 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.146890Jy  sigma=0.332485
! Fit after  self-cal, rms=0.146497Jy  sigma=0.331392
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     HN        1.04     KP        1.01     
!   LA        1.01     MK        1.05     NL        1.13     OV        0.96     
!   PT        1.02     SC        1.06     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.99     HN        1.01     KP        0.93     
!   LA        0.94     MK        1.00     NL        1.10     OV        0.94     
!   PT        1.04     SC        1.02     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.10     FD        1.02     HN        0.93     KP        0.85     
!   LA        0.94     MK        1.03     NL        1.06     OV        0.95     
!   PT        1.04     SC        0.99     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.06     HN        0.94     KP        0.88     
!   LA        0.94     MK        1.05     NL        1.03     OV        0.98     
!   PT        1.12     SC        1.01     
! 
! 
! Fit before self-cal, rms=0.146497Jy  sigma=0.331392
! Fit after  self-cal, rms=0.094963Jy  sigma=0.209500
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8903 mas, bmaj=2.103 mas, bpa=2.793 degrees
! Estimated noise=5.70601 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0117134 Jy
! Component: 100  -  total flux cleaned = -0.0146114 Jy
! Component: 150  -  total flux cleaned = -0.0140194 Jy
! Component: 200  -  total flux cleaned = -0.0137617 Jy
! Total flux subtracted in 200 components = -0.0137617 Jy
! Clean residual min=-0.029084 max=0.011768 Jy/beam
! Clean residual mean=-0.000003 rms=0.003942 Jy/beam
! Combined flux in latest and established models = 1.68768 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 62 components and 1.68768 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.092279Jy  sigma=0.203232
! Fit after  self-cal, rms=0.092039Jy  sigma=0.202760
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.092039Jy  sigma=0.202760
! Fit after  self-cal, rms=0.091735Jy  sigma=0.201906
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8899 mas, bmaj=2.103 mas, bpa=2.805 degrees
! Estimated noise=5.70656 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00677275 Jy
! Component: 100  -  total flux cleaned = -0.00852603 Jy
! Component: 150  -  total flux cleaned = -0.00916693 Jy
! Component: 200  -  total flux cleaned = -0.00936717 Jy
! Total flux subtracted in 200 components = -0.00936717 Jy
! Clean residual min=-0.025369 max=0.010405 Jy/beam
! Clean residual mean=-0.000003 rms=0.003647 Jy/beam
! Combined flux in latest and established models = 1.67832 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 66 components and 1.67832 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.090346Jy  sigma=0.198588
! Fit after  self-cal, rms=0.090220Jy  sigma=0.198379
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.88143e-05 Jy
! Component: 100  -  total flux cleaned = -2.78016e-05 Jy
! Component: 150  -  total flux cleaned = -0.00018719 Jy
! Component: 200  -  total flux cleaned = -0.000330108 Jy
! Total flux subtracted in 200 components = -0.000330108 Jy
! Clean residual min=-0.023429 max=0.010160 Jy/beam
! Clean residual mean=-0.000003 rms=0.003545 Jy/beam
! Combined flux in latest and established models = 1.67799 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 70 components and 1.67799 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.089643Jy  sigma=0.197049
! Fit after  self-cal, rms=0.089580Jy  sigma=0.196937
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.089580Jy  sigma=0.196937
! Fit after  self-cal, rms=0.089227Jy  sigma=0.196032
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8888 mas, bmaj=2.103 mas, bpa=2.812 degrees
! Estimated noise=5.70902 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00553252 Jy
! Component: 100  -  total flux cleaned = -0.00630113 Jy
! Component: 150  -  total flux cleaned = -0.00704233 Jy
! Component: 200  -  total flux cleaned = -0.00742021 Jy
! Total flux subtracted in 200 components = -0.00742021 Jy
! Clean residual min=-0.021214 max=0.010014 Jy/beam
! Clean residual mean=-0.000003 rms=0.003329 Jy/beam
! Combined flux in latest and established models = 1.67057 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 75 components and 1.67057 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.088445Jy  sigma=0.194063
! Fit after  self-cal, rms=0.088403Jy  sigma=0.193992
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000258414 Jy
! Component: 100  -  total flux cleaned = 0.000265271 Jy
! Component: 150  -  total flux cleaned = 0.00016186 Jy
! Component: 200  -  total flux cleaned = 6.58176e-05 Jy
! Total flux subtracted in 200 components = 6.58176e-05 Jy
! Clean residual min=-0.020197 max=0.009999 Jy/beam
! Clean residual mean=-0.000003 rms=0.003274 Jy/beam
! Combined flux in latest and established models = 1.67063 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 80 components and 1.67063 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.088172Jy  sigma=0.193387
! Fit after  self-cal, rms=0.088151Jy  sigma=0.193349
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.088151Jy  sigma=0.193349
! Fit after  self-cal, rms=0.087805Jy  sigma=0.192551
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.142 mas, bmaj=3.116 mas, bpa=-5.599 degrees
! Estimated noise=7.05231 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0126347 Jy
! Component: 100  -  total flux cleaned = -0.0144598 Jy
! Component: 150  -  total flux cleaned = -0.0151719 Jy
! Component: 200  -  total flux cleaned = -0.0153711 Jy
! Total flux subtracted in 200 components = -0.0153711 Jy
! Clean residual min=-0.022088 max=0.012676 Jy/beam
! Clean residual mean=-0.000005 rms=0.004620 Jy/beam
! Combined flux in latest and established models = 1.65526 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 86 components and 1.65526 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.088677Jy  sigma=0.193355
! Fit after  self-cal, rms=0.088642Jy  sigma=0.193285
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000240388 Jy
! Component: 100  -  total flux cleaned = -0.000216011 Jy
! Component: 150  -  total flux cleaned = -0.000609683 Jy
! Component: 200  -  total flux cleaned = -0.000726623 Jy
! Total flux subtracted in 200 components = -0.000726623 Jy
! Clean residual min=-0.020638 max=0.012472 Jy/beam
! Clean residual mean=-0.000005 rms=0.004386 Jy/beam
! Combined flux in latest and established models = 1.65454 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 91 components and 1.65454 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.089402Jy  sigma=0.194439
! Fit after  self-cal, rms=0.089379Jy  sigma=0.194399
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8877 mas, bmaj=2.102 mas, bpa=2.824 degrees
! Estimated noise=5.70962 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8877 x 2.102 at 2.824 degrees (North through East)
! Clean map  min=-0.019197  max=1.2006 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.089379Jy  sigma=0.194399
! Fit after  self-cal, rms=0.085404Jy  sigma=0.182263
! Inverting map and beam 
! Estimated beam: bmin=0.8884 mas, bmaj=2.1 mas, bpa=3.048 degrees
! Estimated noise=5.72265 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00122226 Jy
! Component: 100  -  total flux cleaned = -0.00149842 Jy
! Component: 150  -  total flux cleaned = -0.000852075 Jy
! Component: 200  -  total flux cleaned = -0.000124385 Jy
! Total flux subtracted in 200 components = -0.000124385 Jy
! Clean residual min=-0.018297 max=0.009764 Jy/beam
! Clean residual mean=-0.000002 rms=0.002909 Jy/beam
! Combined flux in latest and established models = 1.65441 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 109 components and 1.65441 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.083841Jy  sigma=0.179290
! Fit after  self-cal, rms=0.083805Jy  sigma=0.179235
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00049259 Jy
! Component: 100  -  total flux cleaned = 0.000780504 Jy
! Component: 150  -  total flux cleaned = 0.000908556 Jy
! Component: 200  -  total flux cleaned = 0.00103082 Jy
! Total flux subtracted in 200 components = 0.00103082 Jy
! Clean residual min=-0.017457 max=0.009492 Jy/beam
! Clean residual mean=-0.000002 rms=0.002865 Jy/beam
! Combined flux in latest and established models = 1.65544 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 114 components and 1.65544 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.083343Jy  sigma=0.178410
! Fit after  self-cal, rms=0.083329Jy  sigma=0.178386
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.083329Jy  sigma=0.178386
! Fit after  self-cal, rms=0.082920Jy  sigma=0.177792
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7163 mas, bmaj=1.835 mas, bpa=4.323 degrees
! Estimated noise=8.72862 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.961017 Jy
! Component: 100  -  total flux cleaned = 1.21305 Jy
! Component: 150  -  total flux cleaned = 1.34254 Jy
! Component: 200  -  total flux cleaned = 1.42136 Jy
! Total flux subtracted in 200 components = 1.42136 Jy
! Clean residual min=-0.023893 max=0.044088 Jy/beam
! Clean residual mean=-0.000002 rms=0.007495 Jy/beam
! Combined flux in latest and established models = 1.42136 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 1.42136 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8873 mas, bmaj=2.1 mas, bpa=2.986 degrees
! Estimated noise=5.71981 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0.8, 0).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0769969 Jy
! Component: 100  -  total flux cleaned = 0.123908 Jy
! Component: 150  -  total flux cleaned = 0.154269 Jy
! Component: 200  -  total flux cleaned = 0.175837 Jy
! Total flux subtracted in 200 components = 0.175837 Jy
! Clean residual min=-0.020781 max=0.018109 Jy/beam
! Clean residual mean=-0.000002 rms=0.004091 Jy/beam
! Combined flux in latest and established models = 1.5972 Jy
! Adding 40 model components to the UV plane model.
! The established model now contains 51 components and 1.5972 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.15 mas, bmaj=3.112 mas, bpa=-5.407 degrees
! Estimated noise=7.06014 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0260467 Jy
! Component: 100  -  total flux cleaned = 0.0362397 Jy
! Component: 150  -  total flux cleaned = 0.0395282 Jy
! Component: 200  -  total flux cleaned = 0.0425332 Jy
! Total flux subtracted in 200 components = 0.0425332 Jy
! Clean residual min=-0.022318 max=0.012295 Jy/beam
! Clean residual mean=-0.000004 rms=0.004681 Jy/beam
! Combined flux in latest and established models = 1.63973 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00212601 Jy
! Component: 100  -  total flux cleaned = 0.00411923 Jy
! Component: 150  -  total flux cleaned = 0.00476184 Jy
! Component: 200  -  total flux cleaned = 0.00532776 Jy
! Total flux subtracted in 200 components = 0.00532776 Jy
! Clean residual min=-0.020308 max=0.010701 Jy/beam
! Clean residual mean=-0.000003 rms=0.004227 Jy/beam
! Combined flux in latest and established models = 1.64506 Jy
! Adding 56 model components to the UV plane model.
! The established model now contains 103 components and 1.64506 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8873 mas, bmaj=2.1 mas, bpa=2.986 degrees
! Estimated noise=5.71981 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00739088 Jy
! Component: 100  -  total flux cleaned = 0.00876529 Jy
! Component: 150  -  total flux cleaned = 0.00997577 Jy
! Component: 200  -  total flux cleaned = 0.0108369 Jy
! Total flux subtracted in 200 components = 0.0108369 Jy
! Clean residual min=-0.017769 max=0.009000 Jy/beam
! Clean residual mean=-0.000001 rms=0.002827 Jy/beam
! Combined flux in latest and established models = 1.6559 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 120 components and 1.6559 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.083364Jy  sigma=0.178427
! Fit after  self-cal, rms=0.083190Jy  sigma=0.178174
wmodel /g0/scr/pima/npcsb_uvs/J0449+1121_X_map.mod
! Writing 120 model components to file: /g0/scr/pima/npcsb_uvs/J0449+1121_X_map.mod
wobs /g0/scr/pima/npcsb_uvs/J0449+1121_X_uvs.fits
! Writing UV FITS file: /g0/scr/pima/npcsb_uvs/J0449+1121_X_uvs.fits
wwins /g0/scr/pima/npcsb_uvs/J0449+1121_X_map.win
! wwins: Wrote 4 windows to /g0/scr/pima/npcsb_uvs/J0449+1121_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00761615 Jy
! Component: 100  -  total flux cleaned = -0.013577 Jy
! Component: 150  -  total flux cleaned = -0.0185135 Jy
! Component: 200  -  total flux cleaned = -0.0227167 Jy
! Component: 250  -  total flux cleaned = -0.0249555 Jy
! Component: 300  -  total flux cleaned = -0.0269795 Jy
! Component: 350  -  total flux cleaned = -0.0278554 Jy
! Component: 400  -  total flux cleaned = -0.0282056 Jy
! Component: 450  -  total flux cleaned = -0.0288752 Jy
! Component: 500  -  total flux cleaned = -0.0295098 Jy
! Component: 550  -  total flux cleaned = -0.03001 Jy
! Component: 600  -  total flux cleaned = -0.0304898 Jy
! Component: 650  -  total flux cleaned = -0.0312187 Jy
! Component: 700  -  total flux cleaned = -0.0315661 Jy
! Component: 750  -  total flux cleaned = -0.0322368 Jy
! Component: 800  -  total flux cleaned = -0.0328034 Jy
! Component: 850  -  total flux cleaned = -0.0331961 Jy
! Component: 900  -  total flux cleaned = -0.0338789 Jy
! Component: 950  -  total flux cleaned = -0.0341723 Jy
! Component: 1000  -  total flux cleaned = -0.0346002 Jy
! Component: 1050  -  total flux cleaned = -0.0348074 Jy
! Component: 1100  -  total flux cleaned = -0.0351461 Jy
! Component: 1150  -  total flux cleaned = -0.0356046 Jy
! Component: 1200  -  total flux cleaned = -0.0359222 Jy
! Component: 1250  -  total flux cleaned = -0.0361707 Jy
! Component: 1300  -  total flux cleaned = -0.0364129 Jy
! Component: 1350  -  total flux cleaned = -0.0367057 Jy
! Component: 1400  -  total flux cleaned = -0.0371043 Jy
! Component: 1450  -  total flux cleaned = -0.0373264 Jy
! Component: 1500  -  total flux cleaned = -0.037762 Jy
! Component: 1550  -  total flux cleaned = -0.0381347 Jy
! Component: 1600  -  total flux cleaned = -0.0384993 Jy
! Component: 1650  -  total flux cleaned = -0.0388057 Jy
! Component: 1700  -  total flux cleaned = -0.0391054 Jy
! Component: 1750  -  total flux cleaned = -0.0393992 Jy
! Component: 1800  -  total flux cleaned = -0.0397362 Jy
! Component: 1850  -  total flux cleaned = -0.0399249 Jy
! Component: 1900  -  total flux cleaned = -0.0401571 Jy
! Component: 1950  -  total flux cleaned = -0.0402488 Jy
! Component: 2000  -  total flux cleaned = -0.0402929 Jy
! Component: 2050  -  total flux cleaned = -0.0403813 Jy
! Component: 2100  -  total flux cleaned = -0.0404248 Jy
! Component: 2150  -  total flux cleaned = -0.040425 Jy
! Component: 2200  -  total flux cleaned = -0.0405921 Jy
! Component: 2250  -  total flux cleaned = -0.0406329 Jy
! Component: 2300  -  total flux cleaned = -0.0408359 Jy
! Component: 2350  -  total flux cleaned = -0.0409159 Jy
! Component: 2400  -  total flux cleaned = -0.0409942 Jy
! Component: 2450  -  total flux cleaned = -0.0410335 Jy
! Component: 2500  -  total flux cleaned = -0.0410719 Jy
! Component: 2550  -  total flux cleaned = -0.0410719 Jy
! Component: 2600  -  total flux cleaned = -0.0411097 Jy
! Component: 2650  -  total flux cleaned = -0.0409996 Jy
! Component: 2700  -  total flux cleaned = -0.0410725 Jy
! Component: 2750  -  total flux cleaned = -0.0411805 Jy
! Component: 2800  -  total flux cleaned = -0.0412159 Jy
! Component: 2850  -  total flux cleaned = -0.0412511 Jy
! Component: 2900  -  total flux cleaned = -0.0411469 Jy
! Component: 2950  -  total flux cleaned = -0.0412846 Jy
! Component: 3000  -  total flux cleaned = -0.0413526 Jy
! Component: 3050  -  total flux cleaned = -0.0413518 Jy
! Component: 3100  -  total flux cleaned = -0.0412847 Jy
! Component: 3150  -  total flux cleaned = -0.0414838 Jy
! Component: 3200  -  total flux cleaned = -0.0414507 Jy
! Component: 3250  -  total flux cleaned = -0.0413203 Jy
! Component: 3300  -  total flux cleaned = -0.041353 Jy
! Component: 3350  -  total flux cleaned = -0.041417 Jy
! Component: 3400  -  total flux cleaned = -0.0414171 Jy
! Component: 3450  -  total flux cleaned = -0.0413536 Jy
! Component: 3500  -  total flux cleaned = -0.0412287 Jy
! Component: 3550  -  total flux cleaned = -0.041105 Jy
! Component: 3600  -  total flux cleaned = -0.0410747 Jy
! Component: 3650  -  total flux cleaned = -0.0410745 Jy
! Component: 3700  -  total flux cleaned = -0.041044 Jy
! Component: 3750  -  total flux cleaned = -0.0409534 Jy
! Component: 3800  -  total flux cleaned = -0.0409236 Jy
! Component: 3850  -  total flux cleaned = -0.0408639 Jy
! Component: 3900  -  total flux cleaned = -0.0408047 Jy
! Component: 3950  -  total flux cleaned = -0.0407169 Jy
! Component: 4000  -  total flux cleaned = -0.0407168 Jy
! Component: 4050  -  total flux cleaned = -0.0406588 Jy
! Total flux subtracted in 4096 components = -0.0405721 Jy
! Clean residual min=-0.001804 max=0.001715 Jy/beam
! Clean residual mean=-0.000000 rms=0.000483 Jy/beam
! Combined flux in latest and established models = 1.61533 Jy
keep
! Adding 288 model components to the UV plane model.
! The established model now contains 408 components and 1.61533 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/g0/scr/pima/npcsb_uvs/J0449+1121_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8873 x 2.1 at 2.986 degrees (North through East)
! Clean map  min=-0.011616  max=1.2135 Jy/beam
! Writing clean map to FITS file: /g0/scr/pima/npcsb_uvs/J0449+1121_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 1.21351 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000467805 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.115649 0.115649 0.231299 0.462598 0.925196 1.85039 3.70078 7.40157 14.8031 29.6063 59.2125
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0014 
print "peak=",int(1000*peak_flux)/1000
! peak= 1.213 
quit
! Quitting program
! Log file /g0/scr/pima/npcsb_uvs/J0449+1121_X_uvs.log closed on Wed Sep 25 00:04:03 2013