! Started logfile: /g0/scr/pima/npcsb_uvs/J0445+7838_S_uvs.log on Wed Sep 25 00:09:06 2013
obs /g0/scr/pima/npcsb_uvs/J0445+7838_S_uva.fits
! Reading UV FITS file: /g0/scr/pima/npcsb_uvs/J0445+7838_S_uva.fits
! AN table 1: 46 integrations on 21 of 21 possible baselines.
! Apparent sampling: 0.857143 visibilities/baseline/integration-bin.
! Found source: J0445+7838
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23693e+09        8e+06          1        8e+06
!  02        2  2.26693e+09        8e+06          1        8e+06
!  03        3  2.35693e+09        8e+06          1        8e+06
!  04        4  2.37693e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 3312 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsb_uvs/J0445+7838_S]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=1.011034Jy  sigma=2.360125
! Fit after  self-cal, rms=0.950654Jy  sigma=2.221624
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.475 mas, bmaj=11.85 mas, bpa=18.18 degrees
! Estimated noise=9.06825 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0407626 Jy
! Component: 100  -  total flux cleaned = 0.0490553 Jy
! Total flux subtracted in 100 components = 0.0490553 Jy
! Clean residual min=-0.005734 max=0.005469 Jy/beam
! Clean residual mean=0.000004 rms=0.001542 Jy/beam
! Combined flux in latest and established models = 0.0490553 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.0490553 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.077046Jy  sigma=0.163753
! Fit after  self-cal, rms=0.075267Jy  sigma=0.159662
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.861 mas, bmaj=13.33 mas, bpa=21.88 degrees
! Estimated noise=5.39294 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00598105 Jy
! Component: 100  -  total flux cleaned = 0.00854341 Jy
! Component: 150  -  total flux cleaned = 0.00893867 Jy
! Component: 200  -  total flux cleaned = 0.00914837 Jy
! Total flux subtracted in 200 components = 0.00914837 Jy
! Clean residual min=-0.003173 max=0.003352 Jy/beam
! Clean residual mean=0.000007 rms=0.000905 Jy/beam
! Combined flux in latest and established models = 0.0582037 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 22 components and 0.0582037 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.074748Jy  sigma=0.158673
! Fit after  self-cal, rms=0.074643Jy  sigma=0.158586
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        1.09     KP        0.90     LA        1.06     
!   MK        0.99     OV        1.13     PT        1.00     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     KP        0.92     LA        1.04     
!   MK        0.92     OV        1.02     PT        0.94     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.14     FD        1.01     KP        1.00     LA        0.92     
!   MK        0.96     OV        1.07     PT        1.09     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.85     KP        0.96     LA        0.73     
!   MK        0.86     OV        0.91     PT        1.00     
! 
! 
! Fit before self-cal, rms=0.074643Jy  sigma=0.158586
! Fit after  self-cal, rms=0.069623Jy  sigma=0.157583
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.728 mas, bmaj=13.48 mas, bpa=21.42 degrees
! Estimated noise=5.26528 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000720509 Jy
! Component: 100  -  total flux cleaned = -0.000973817 Jy
! Component: 150  -  total flux cleaned = -0.00109186 Jy
! Component: 200  -  total flux cleaned = -0.00117118 Jy
! Total flux subtracted in 200 components = -0.00117118 Jy
! Clean residual min=-0.002816 max=0.003301 Jy/beam
! Clean residual mean=0.000007 rms=0.000752 Jy/beam
! Combined flux in latest and established models = 0.0570325 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 36 components and 0.0570325 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069608Jy  sigma=0.157577
! Fit after  self-cal, rms=0.069583Jy  sigma=0.157471
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069583Jy  sigma=0.157471
! Fit after  self-cal, rms=0.068990Jy  sigma=0.157434
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.706 mas, bmaj=13.56 mas, bpa=21.35 degrees
! Estimated noise=5.21767 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000679794 Jy
! Component: 100  -  total flux cleaned = -0.000844146 Jy
! Component: 150  -  total flux cleaned = -0.000955207 Jy
! Component: 200  -  total flux cleaned = -0.00103005 Jy
! Total flux subtracted in 200 components = -0.00103005 Jy
! Clean residual min=-0.002671 max=0.003280 Jy/beam
! Clean residual mean=0.000006 rms=0.000719 Jy/beam
! Combined flux in latest and established models = 0.0560024 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 42 components and 0.0560024 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.068975Jy  sigma=0.157430
! Fit after  self-cal, rms=0.068997Jy  sigma=0.157419
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (97.5, -80).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00182047 Jy
! Component: 100  -  total flux cleaned = 0.00187177 Jy
! Component: 150  -  total flux cleaned = 0.00187217 Jy
! Component: 200  -  total flux cleaned = 0.0019424 Jy
! Total flux subtracted in 200 components = 0.0019424 Jy
! Clean residual min=-0.002617 max=0.002206 Jy/beam
! Clean residual mean=0.000006 rms=0.000588 Jy/beam
! Combined flux in latest and established models = 0.0579448 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 71 components and 0.0579448 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.068883Jy  sigma=0.157138
! Fit after  self-cal, rms=0.068836Jy  sigma=0.157014
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.068836Jy  sigma=0.157014
! Fit after  self-cal, rms=0.068770Jy  sigma=0.157004
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.687 mas, bmaj=13.61 mas, bpa=21.24 degrees
! Estimated noise=5.20418 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00100411 Jy
! Component: 100  -  total flux cleaned = 0.000935992 Jy
! Component: 150  -  total flux cleaned = 0.000814276 Jy
! Component: 200  -  total flux cleaned = 0.000785993 Jy
! Total flux subtracted in 200 components = 0.000785993 Jy
! Clean residual min=-0.002617 max=0.002095 Jy/beam
! Clean residual mean=0.000006 rms=0.000559 Jy/beam
! Combined flux in latest and established models = 0.0587308 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 84 components and 0.0587308 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.068717Jy  sigma=0.156875
! Fit after  self-cal, rms=0.068734Jy  sigma=0.156794
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00043282 Jy
! Component: 100  -  total flux cleaned = 0.000581454 Jy
! Component: 150  -  total flux cleaned = 0.000710352 Jy
! Component: 200  -  total flux cleaned = 0.00075861 Jy
! Total flux subtracted in 200 components = 0.00075861 Jy
! Clean residual min=-0.002480 max=0.002182 Jy/beam
! Clean residual mean=0.000005 rms=0.000548 Jy/beam
! Combined flux in latest and established models = 0.0594894 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 100 components and 0.0594894 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.068709Jy  sigma=0.156739
! Fit after  self-cal, rms=0.068709Jy  sigma=0.156727
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.068709Jy  sigma=0.156727
! Fit after  self-cal, rms=0.068711Jy  sigma=0.156714
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.747 mas, bmaj=17.92 mas, bpa=42.29 degrees
! Estimated noise=5.86286 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000729667 Jy
! Component: 100  -  total flux cleaned = 0.000788757 Jy
! Component: 150  -  total flux cleaned = 0.000854576 Jy
! Component: 200  -  total flux cleaned = 0.000884691 Jy
! Total flux subtracted in 200 components = 0.000884691 Jy
! Clean residual min=-0.002108 max=0.001927 Jy/beam
! Clean residual mean=0.000006 rms=0.000550 Jy/beam
! Combined flux in latest and established models = 0.0603741 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 120 components and 0.0603741 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.068696Jy  sigma=0.156689
! Fit after  self-cal, rms=0.068710Jy  sigma=0.156679
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000545513 Jy
! Component: 100  -  total flux cleaned = 0.000597261 Jy
! Component: 150  -  total flux cleaned = 0.000642546 Jy
! Component: 200  -  total flux cleaned = 0.000670735 Jy
! Total flux subtracted in 200 components = 0.000670735 Jy
! Clean residual min=-0.002079 max=0.001871 Jy/beam
! Clean residual mean=0.000006 rms=0.000546 Jy/beam
! Combined flux in latest and established models = 0.0610448 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 127 components and 0.0610448 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.068700Jy  sigma=0.156668
! Fit after  self-cal, rms=0.068702Jy  sigma=0.156663
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=4.668 mas, bmaj=13.66 mas, bpa=21.12 degrees
! Estimated noise=5.19941 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.668 x 13.66 at 21.12 degrees (North through East)
! Clean map  min=-0.0021865  max=0.052348 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.304 mas, bmaj=12.29 mas, bpa=17.92 degrees
! Estimated noise=8.53037 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0400669 Jy
! Component: 100  -  total flux cleaned = 0.0498867 Jy
! Component: 150  -  total flux cleaned = 0.0531376 Jy
! Component: 200  -  total flux cleaned = 0.0549344 Jy
! Total flux subtracted in 200 components = 0.0549344 Jy
! Clean residual min=-0.003875 max=0.003598 Jy/beam
! Clean residual mean=0.000005 rms=0.001003 Jy/beam
! Combined flux in latest and established models = 0.0549344 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 18 model components to the UV plane model.
! The established model now contains 18 components and 0.0549344 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.668 mas, bmaj=13.66 mas, bpa=21.12 degrees
! Estimated noise=5.19941 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00289362 Jy
! Component: 100  -  total flux cleaned = 0.00442115 Jy
! Component: 150  -  total flux cleaned = 0.005498 Jy
! Component: 200  -  total flux cleaned = 0.00576895 Jy
! Total flux subtracted in 200 components = 0.00576895 Jy
! Clean residual min=-0.002670 max=0.002487 Jy/beam
! Clean residual mean=0.000007 rms=0.000656 Jy/beam
! Combined flux in latest and established models = 0.0607034 Jy
! Adding 33 model components to the UV plane model.
! The established model now contains 48 components and 0.0607033 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.747 mas, bmaj=17.92 mas, bpa=42.29 degrees
! Estimated noise=5.86286 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00085442 Jy
! Component: 100  -  total flux cleaned = 0.00103843 Jy
! Component: 150  -  total flux cleaned = 0.00118496 Jy
! Component: 200  -  total flux cleaned = 0.00126885 Jy
! Total flux subtracted in 200 components = 0.00126885 Jy
! Clean residual min=-0.002465 max=0.002070 Jy/beam
! Clean residual mean=0.000006 rms=0.000596 Jy/beam
! Combined flux in latest and established models = 0.0619722 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000114416 Jy
! Component: 100  -  total flux cleaned = 0.000184641 Jy
! Component: 150  -  total flux cleaned = 0.000233921 Jy
! Component: 200  -  total flux cleaned = 0.000280303 Jy
! Total flux subtracted in 200 components = 0.000280303 Jy
! Clean residual min=-0.002336 max=0.002014 Jy/beam
! Clean residual mean=0.000006 rms=0.000574 Jy/beam
! Combined flux in latest and established models = 0.0622525 Jy
! Adding 40 model components to the UV plane model.
! The established model now contains 84 components and 0.0622525 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=4.668 mas, bmaj=13.66 mas, bpa=21.12 degrees
! Estimated noise=5.19941 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000136816 Jy
! Component: 100  -  total flux cleaned = -0.000174171 Jy
! Component: 150  -  total flux cleaned = -0.000206081 Jy
! Component: 200  -  total flux cleaned = -0.000265056 Jy
! Total flux subtracted in 200 components = -0.000265056 Jy
! Clean residual min=-0.002486 max=0.002238 Jy/beam
! Clean residual mean=0.000005 rms=0.000560 Jy/beam
! Combined flux in latest and established models = 0.0619874 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 98 components and 0.0619874 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.068717Jy  sigma=0.156744
! Fit after  self-cal, rms=0.068717Jy  sigma=0.156725
wmodel /g0/scr/pima/npcsb_uvs/J0445+7838_S_map.mod
! Writing 98 model components to file: /g0/scr/pima/npcsb_uvs/J0445+7838_S_map.mod
wobs /g0/scr/pima/npcsb_uvs/J0445+7838_S_uvs.fits
! Writing UV FITS file: /g0/scr/pima/npcsb_uvs/J0445+7838_S_uvs.fits
wwins /g0/scr/pima/npcsb_uvs/J0445+7838_S_map.win
! wwins: Wrote 2 windows to /g0/scr/pima/npcsb_uvs/J0445+7838_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000148293 Jy
! Component: 100  -  total flux cleaned = 2.02527e-05 Jy
! Component: 150  -  total flux cleaned = 2.12848e-05 Jy
! Component: 200  -  total flux cleaned = 5.15927e-05 Jy
! Component: 250  -  total flux cleaned = -2.69909e-05 Jy
! Component: 300  -  total flux cleaned = -0.000126585 Jy
! Component: 350  -  total flux cleaned = -0.000219694 Jy
! Component: 400  -  total flux cleaned = -0.000220659 Jy
! Component: 450  -  total flux cleaned = -0.000134332 Jy
! Component: 500  -  total flux cleaned = -8.51257e-06 Jy
! Component: 550  -  total flux cleaned = 0.000175697 Jy
! Component: 600  -  total flux cleaned = 0.000375568 Jy
! Component: 650  -  total flux cleaned = 0.000532176 Jy
! Component: 700  -  total flux cleaned = 0.000761928 Jy
! Component: 750  -  total flux cleaned = 0.000930611 Jy
! Component: 800  -  total flux cleaned = 0.00115144 Jy
! Component: 850  -  total flux cleaned = 0.00129604 Jy
! Component: 900  -  total flux cleaned = 0.00147417 Jy
! Component: 950  -  total flux cleaned = 0.00166695 Jy
! Component: 1000  -  total flux cleaned = 0.0018222 Jy
! Component: 1050  -  total flux cleaned = 0.00199236 Jy
! Component: 1100  -  total flux cleaned = 0.00214332 Jy
! Component: 1150  -  total flux cleaned = 0.0022591 Jy
! Component: 1200  -  total flux cleaned = 0.00242234 Jy
! Component: 1250  -  total flux cleaned = 0.00253518 Jy
! Component: 1300  -  total flux cleaned = 0.0026627 Jy
! Component: 1350  -  total flux cleaned = 0.00278878 Jy
! Component: 1400  -  total flux cleaned = 0.00286684 Jy
! Component: 1450  -  total flux cleaned = 0.00300558 Jy
! Component: 1500  -  total flux cleaned = 0.00309696 Jy
! Component: 1550  -  total flux cleaned = 0.00320263 Jy
! Component: 1600  -  total flux cleaned = 0.00329226 Jy
! Component: 1650  -  total flux cleaned = 0.00339572 Jy
! Component: 1700  -  total flux cleaned = 0.00351258 Jy
! Component: 1750  -  total flux cleaned = 0.00361393 Jy
! Component: 1800  -  total flux cleaned = 0.00371449 Jy
! Component: 1850  -  total flux cleaned = 0.00378559 Jy
! Component: 1900  -  total flux cleaned = 0.0038843 Jy
! Component: 1950  -  total flux cleaned = 0.00396819 Jy
! Component: 2000  -  total flux cleaned = 0.00405157 Jy
! Component: 2050  -  total flux cleaned = 0.00414804 Jy
! Component: 2100  -  total flux cleaned = 0.00421654 Jy
! Component: 2150  -  total flux cleaned = 0.00429805 Jy
! Component: 2200  -  total flux cleaned = 0.00436565 Jy
! Component: 2250  -  total flux cleaned = 0.00444627 Jy
! Component: 2300  -  total flux cleaned = 0.00451282 Jy
! Component: 2350  -  total flux cleaned = 0.00456581 Jy
! Component: 2400  -  total flux cleaned = 0.00463176 Jy
! Component: 2450  -  total flux cleaned = 0.00469734 Jy
! Component: 2500  -  total flux cleaned = 0.00476258 Jy
! Component: 2550  -  total flux cleaned = 0.00482749 Jy
! Component: 2600  -  total flux cleaned = 0.00486611 Jy
! Component: 2650  -  total flux cleaned = 0.00491744 Jy
! Component: 2700  -  total flux cleaned = 0.00494294 Jy
! Component: 2750  -  total flux cleaned = 0.00500633 Jy
! Component: 2800  -  total flux cleaned = 0.00500622 Jy
! Component: 2850  -  total flux cleaned = 0.00501875 Jy
! Component: 2900  -  total flux cleaned = 0.00504388 Jy
! Component: 2950  -  total flux cleaned = 0.0051314 Jy
! Component: 3000  -  total flux cleaned = 0.00515625 Jy
! Component: 3050  -  total flux cleaned = 0.00521841 Jy
! Component: 3100  -  total flux cleaned = 0.00525548 Jy
! Component: 3150  -  total flux cleaned = 0.00530486 Jy
! Component: 3200  -  total flux cleaned = 0.00536637 Jy
! Component: 3250  -  total flux cleaned = 0.00542773 Jy
! Component: 3300  -  total flux cleaned = 0.00545215 Jy
! Component: 3350  -  total flux cleaned = 0.00551313 Jy
! Component: 3400  -  total flux cleaned = 0.00553748 Jy
! Component: 3450  -  total flux cleaned = 0.00557391 Jy
! Component: 3500  -  total flux cleaned = 0.00562233 Jy
! Component: 3550  -  total flux cleaned = 0.00565863 Jy
! Component: 3600  -  total flux cleaned = 0.00568278 Jy
! Component: 3650  -  total flux cleaned = 0.00571894 Jy
! Component: 3700  -  total flux cleaned = 0.005743 Jy
! Component: 3750  -  total flux cleaned = 0.0057911 Jy
! Component: 3800  -  total flux cleaned = 0.00580312 Jy
! Component: 3850  -  total flux cleaned = 0.00583909 Jy
! Component: 3900  -  total flux cleaned = 0.00589901 Jy
! Component: 3950  -  total flux cleaned = 0.00593489 Jy
! Component: 4000  -  total flux cleaned = 0.00595883 Jy
! Component: 4050  -  total flux cleaned = 0.00601852 Jy
! Total flux subtracted in 4096 components = 0.00607816 Jy
! Clean residual min=-0.000766 max=0.000698 Jy/beam
! Clean residual mean=0.000003 rms=0.000203 Jy/beam
! Combined flux in latest and established models = 0.0680656 Jy
keep
! Adding 202 model components to the UV plane model.
! The established model now contains 300 components and 0.0680657 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/g0/scr/pima/npcsb_uvs/J0445+7838_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.668 x 13.66 at 21.12 degrees (North through East)
! Clean map  min=-0.0018984  max=0.051669 Jy/beam
! Writing clean map to FITS file: /g0/scr/pima/npcsb_uvs/J0445+7838_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0516688 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000195927 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.13759 1.13759 2.27519 4.55037 9.10075 18.2015 36.403 72.806
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0005 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.051 
quit
! Quitting program
! Log file /g0/scr/pima/npcsb_uvs/J0445+7838_S_uvs.log closed on Wed Sep 25 00:09:10 2013