! Started logfile: /g0/scr/pima/npcsb_uvs/J0415+7753_S_uvs.log on Wed Sep 25 00:09:01 2013
obs /g0/scr/pima/npcsb_uvs/J0415+7753_S_uva.fits
! Reading UV FITS file: /g0/scr/pima/npcsb_uvs/J0415+7753_S_uva.fits
! AN table 1: 46 integrations on 28 of 28 possible baselines.
! Apparent sampling: 0.710404 visibilities/baseline/integration-bin.
! Found source: J0415+7753
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23693e+09        8e+06          1        8e+06
!  02        2  2.26693e+09        8e+06          1        8e+06
!  03        3  2.35693e+09        8e+06          1        8e+06
!  04        4  2.37693e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 3660 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsb_uvs/J0415+7753_S]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 47 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 47 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 47 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 47 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.009261Jy  sigma=2.292448
! Fit after  self-cal, rms=0.921163Jy  sigma=2.120068
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=8.774 mas, bmaj=10.67 mas, bpa=39.66 degrees
! Estimated noise=8.80294 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0538482 Jy
! Component: 100  -  total flux cleaned = 0.0766367 Jy
! Total flux subtracted in 100 components = 0.0766367 Jy
! Clean residual min=-0.010672 max=0.014106 Jy/beam
! Clean residual mean=0.000073 rms=0.004154 Jy/beam
! Combined flux in latest and established models = 0.0766367 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 17 components and 0.0766367 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.097895Jy  sigma=0.198863
! Fit after  self-cal, rms=0.096161Jy  sigma=0.195211
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=9.773 mas, bmaj=11.41 mas, bpa=36.33 degrees
! Estimated noise=5.3894 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0273787 Jy
! Component: 100  -  total flux cleaned = 0.0446122 Jy
! Component: 150  -  total flux cleaned = 0.0568338 Jy
! Component: 200  -  total flux cleaned = 0.0658817 Jy
! Total flux subtracted in 200 components = 0.0658817 Jy
! Clean residual min=-0.008185 max=0.009576 Jy/beam
! Clean residual mean=0.000050 rms=0.002953 Jy/beam
! Combined flux in latest and established models = 0.142518 Jy
! Performing phase self-cal
! Adding 92 model components to the UV plane model.
! The established model now contains 108 components and 0.142518 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.085418Jy  sigma=0.173545
! Fit after  self-cal, rms=0.084668Jy  sigma=0.172363
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.81     FD        0.97     HN        1.00*    KP        1.07     
!   LA        0.94     NL        1.04     OV        1.16     PT        0.99     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.13     FD        1.00     HN        1.00*    KP        0.93     
!   LA        0.96     NL        1.19     OV        1.07     PT        0.82     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.20     FD        1.01     HN        1.00*    KP        1.04     
!   LA        0.76     NL        1.18     OV        1.16     PT        0.88     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.96     HN        1.00*    KP        1.03     
!   LA        0.66     NL        1.14     OV        0.88     PT        0.84     
! 
! 
! Fit before self-cal, rms=0.084668Jy  sigma=0.172363
! Fit after  self-cal, rms=0.076177Jy  sigma=0.167389
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=9.868 mas, bmaj=11.95 mas, bpa=38.53 degrees
! Estimated noise=5.15741 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00138889 Jy
! Component: 100  -  total flux cleaned = 0.00201722 Jy
! Component: 150  -  total flux cleaned = 0.00216626 Jy
! Component: 200  -  total flux cleaned = 0.00228742 Jy
! Total flux subtracted in 200 components = 0.00228742 Jy
! Clean residual min=-0.005451 max=0.006306 Jy/beam
! Clean residual mean=0.000010 rms=0.001765 Jy/beam
! Combined flux in latest and established models = 0.144806 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 120 components and 0.144806 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.075892Jy  sigma=0.166636
! Fit after  self-cal, rms=0.075725Jy  sigma=0.165971
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.075725Jy  sigma=0.165971
! Fit after  self-cal, rms=0.075052Jy  sigma=0.165907
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.82 mas, bmaj=12 mas, bpa=39.72 degrees
! Estimated noise=5.08858 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.83473e-05 Jy
! Component: 100  -  total flux cleaned = 2.45875e-05 Jy
! Component: 150  -  total flux cleaned = 1.92473e-05 Jy
! Component: 200  -  total flux cleaned = 0.000170347 Jy
! Total flux subtracted in 200 components = 0.000170347 Jy
! Clean residual min=-0.005264 max=0.005573 Jy/beam
! Clean residual mean=0.000010 rms=0.001612 Jy/beam
! Combined flux in latest and established models = 0.144976 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 126 components and 0.144976 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.074939Jy  sigma=0.165610
! Fit after  self-cal, rms=0.074908Jy  sigma=0.165567
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000141362 Jy
! Component: 100  -  total flux cleaned = 9.11191e-05 Jy
! Component: 150  -  total flux cleaned = 0.000227623 Jy
! Component: 200  -  total flux cleaned = 0.000310811 Jy
! Total flux subtracted in 200 components = 0.000310811 Jy
! Clean residual min=-0.005130 max=0.005563 Jy/beam
! Clean residual mean=0.000011 rms=0.001562 Jy/beam
! Combined flux in latest and established models = 0.145287 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 130 components and 0.145287 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.074844Jy  sigma=0.165416
! Fit after  self-cal, rms=0.074819Jy  sigma=0.165394
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.074819Jy  sigma=0.165394
! Fit after  self-cal, rms=0.073852Jy  sigma=0.165369
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.81 mas, bmaj=11.96 mas, bpa=39.82 degrees
! Estimated noise=5.01917 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000496462 Jy
! Component: 100  -  total flux cleaned = -0.00054252 Jy
! Component: 150  -  total flux cleaned = -0.000462255 Jy
! Component: 200  -  total flux cleaned = -0.000388816 Jy
! Total flux subtracted in 200 components = -0.000388816 Jy
! Clean residual min=-0.004908 max=0.005429 Jy/beam
! Clean residual mean=0.000010 rms=0.001497 Jy/beam
! Combined flux in latest and established models = 0.144898 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 135 components and 0.144898 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.073796Jy  sigma=0.165243
! Fit after  self-cal, rms=0.073773Jy  sigma=0.165226
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.82892e-05 Jy
! Component: 100  -  total flux cleaned = -1.11431e-05 Jy
! Component: 150  -  total flux cleaned = 8.88849e-05 Jy
! Component: 200  -  total flux cleaned = 0.000181864 Jy
! Total flux subtracted in 200 components = 0.000181864 Jy
! Clean residual min=-0.004867 max=0.005391 Jy/beam
! Clean residual mean=0.000010 rms=0.001467 Jy/beam
! Combined flux in latest and established models = 0.14508 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 137 components and 0.14508 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.073739Jy  sigma=0.165146
! Fit after  self-cal, rms=0.073722Jy  sigma=0.165135
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.073722Jy  sigma=0.165135
! Fit after  self-cal, rms=0.072881Jy  sigma=0.165116
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=10.72 mas, bmaj=13.03 mas, bpa=36.59 degrees
! Estimated noise=5.06133 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.07991e-06 Jy
! Component: 100  -  total flux cleaned = -4.36703e-08 Jy
! Component: 150  -  total flux cleaned = 7.03376e-07 Jy
! Component: 200  -  total flux cleaned = 8.52964e-05 Jy
! Total flux subtracted in 200 components = 8.52964e-05 Jy
! Clean residual min=-0.004893 max=0.005641 Jy/beam
! Clean residual mean=0.000011 rms=0.001582 Jy/beam
! Combined flux in latest and established models = 0.145165 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 152 components and 0.145165 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.072848Jy  sigma=0.165047
! Fit after  self-cal, rms=0.072826Jy  sigma=0.165031
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000157434 Jy
! Component: 100  -  total flux cleaned = 0.000159116 Jy
! Component: 150  -  total flux cleaned = 0.000156929 Jy
! Component: 200  -  total flux cleaned = 0.000203077 Jy
! Total flux subtracted in 200 components = 0.000203077 Jy
! Clean residual min=-0.004852 max=0.005600 Jy/beam
! Clean residual mean=0.000011 rms=0.001555 Jy/beam
! Combined flux in latest and established models = 0.145368 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 155 components and 0.145368 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.072806Jy  sigma=0.164986
! Fit after  self-cal, rms=0.072788Jy  sigma=0.164967
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=9.809 mas, bmaj=11.9 mas, bpa=39.76 degrees
! Estimated noise=4.96235 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 9.809 x 11.9 at 39.76 degrees (North through East)
! Clean map  min=-0.0046483  max=0.078373 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.701 mas, bmaj=11.11 mas, bpa=42.05 degrees
! Estimated noise=8.12904 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0499394 Jy
! Component: 100  -  total flux cleaned = 0.0752882 Jy
! Component: 150  -  total flux cleaned = 0.0922642 Jy
! Component: 200  -  total flux cleaned = 0.104135 Jy
! Total flux subtracted in 200 components = 0.104135 Jy
! Clean residual min=-0.009810 max=0.008280 Jy/beam
! Clean residual mean=0.000036 rms=0.002778 Jy/beam
! Combined flux in latest and established models = 0.104135 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 38 model components to the UV plane model.
! The established model now contains 38 components and 0.104135 Jy
! Inverting map and beam 
! Estimated beam: bmin=9.809 mas, bmaj=11.9 mas, bpa=39.76 degrees
! Estimated noise=4.96235 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0136337 Jy
! Component: 100  -  total flux cleaned = 0.0219681 Jy
! Component: 150  -  total flux cleaned = 0.0278327 Jy
! Component: 200  -  total flux cleaned = 0.0320228 Jy
! Total flux subtracted in 200 components = 0.0320228 Jy
! Clean residual min=-0.005785 max=0.006078 Jy/beam
! Clean residual mean=0.000016 rms=0.001749 Jy/beam
! Combined flux in latest and established models = 0.136158 Jy
! Adding 49 model components to the UV plane model.
! The established model now contains 80 components and 0.136158 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=10.72 mas, bmaj=13.03 mas, bpa=36.59 degrees
! Estimated noise=5.06133 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00361955 Jy
! Component: 100  -  total flux cleaned = 0.00599552 Jy
! Component: 150  -  total flux cleaned = 0.00691504 Jy
! Component: 200  -  total flux cleaned = 0.00745825 Jy
! Total flux subtracted in 200 components = 0.00745825 Jy
! Clean residual min=-0.005130 max=0.005397 Jy/beam
! Clean residual mean=0.000011 rms=0.001703 Jy/beam
! Combined flux in latest and established models = 0.143616 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00043344 Jy
! Component: 100  -  total flux cleaned = 0.000533091 Jy
! Component: 150  -  total flux cleaned = 0.000675809 Jy
! Component: 200  -  total flux cleaned = 0.000808303 Jy
! Total flux subtracted in 200 components = 0.000808303 Jy
! Clean residual min=-0.004926 max=0.005542 Jy/beam
! Clean residual mean=0.000011 rms=0.001654 Jy/beam
! Combined flux in latest and established models = 0.144424 Jy
! Adding 36 model components to the UV plane model.
! The established model now contains 101 components and 0.144424 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=9.809 mas, bmaj=11.9 mas, bpa=39.76 degrees
! Estimated noise=4.96235 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000259212 Jy
! Component: 100  -  total flux cleaned = -0.000261774 Jy
! Component: 150  -  total flux cleaned = -0.000221585 Jy
! Component: 200  -  total flux cleaned = -0.00014202 Jy
! Total flux subtracted in 200 components = -0.00014202 Jy
! Clean residual min=-0.004676 max=0.005410 Jy/beam
! Clean residual mean=0.000009 rms=0.001478 Jy/beam
! Combined flux in latest and established models = 0.144282 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 109 components and 0.144282 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.072895Jy  sigma=0.165181
! Fit after  self-cal, rms=0.072906Jy  sigma=0.165122
wmodel /g0/scr/pima/npcsb_uvs/J0415+7753_S_map.mod
! Writing 109 model components to file: /g0/scr/pima/npcsb_uvs/J0415+7753_S_map.mod
wobs /g0/scr/pima/npcsb_uvs/J0415+7753_S_uvs.fits
! Writing UV FITS file: /g0/scr/pima/npcsb_uvs/J0415+7753_S_uvs.fits
wwins /g0/scr/pima/npcsb_uvs/J0415+7753_S_map.win
! wwins: Wrote 1 windows to /g0/scr/pima/npcsb_uvs/J0415+7753_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000860306 Jy
! Component: 100  -  total flux cleaned = 0.000700074 Jy
! Component: 150  -  total flux cleaned = 0.000631017 Jy
! Component: 200  -  total flux cleaned = 0.000574749 Jy
! Component: 250  -  total flux cleaned = 0.000521185 Jy
! Component: 300  -  total flux cleaned = 0.00062417 Jy
! Component: 350  -  total flux cleaned = 0.000814856 Jy
! Component: 400  -  total flux cleaned = 0.000902541 Jy
! Component: 450  -  total flux cleaned = 0.000902489 Jy
! Component: 500  -  total flux cleaned = 0.000943482 Jy
! Component: 550  -  total flux cleaned = 0.000832155 Jy
! Component: 600  -  total flux cleaned = 0.000727671 Jy
! Component: 650  -  total flux cleaned = 0.000728142 Jy
! Component: 700  -  total flux cleaned = 0.000633258 Jy
! Component: 750  -  total flux cleaned = 0.000543954 Jy
! Component: 800  -  total flux cleaned = 0.000486639 Jy
! Component: 850  -  total flux cleaned = 0.000377872 Jy
! Component: 900  -  total flux cleaned = 0.000376791 Jy
! Component: 950  -  total flux cleaned = 0.000325819 Jy
! Component: 1000  -  total flux cleaned = 0.000180275 Jy
! Component: 1050  -  total flux cleaned = 0.000156872 Jy
! Component: 1100  -  total flux cleaned = 6.62922e-05 Jy
! Component: 1150  -  total flux cleaned = 4.4598e-05 Jy
! Component: 1200  -  total flux cleaned = 1.77413e-06 Jy
! Component: 1250  -  total flux cleaned = -3.98684e-05 Jy
! Component: 1300  -  total flux cleaned = -1.93355e-05 Jy
! Component: 1350  -  total flux cleaned = 3.04711e-07 Jy
! Component: 1400  -  total flux cleaned = 1.44066e-07 Jy
! Component: 1450  -  total flux cleaned = -1.87463e-05 Jy
! Component: 1500  -  total flux cleaned = 1.88859e-05 Jy
! Component: 1550  -  total flux cleaned = 1.92388e-05 Jy
! Component: 1600  -  total flux cleaned = 9.05132e-05 Jy
! Component: 1650  -  total flux cleaned = 0.000107888 Jy
! Component: 1700  -  total flux cleaned = 0.000141685 Jy
! Component: 1750  -  total flux cleaned = 0.000141546 Jy
! Component: 1800  -  total flux cleaned = 0.000207214 Jy
! Component: 1850  -  total flux cleaned = 0.000207209 Jy
! Component: 1900  -  total flux cleaned = 0.000223217 Jy
! Component: 1950  -  total flux cleaned = 0.000223421 Jy
! Component: 2000  -  total flux cleaned = 0.000223562 Jy
! Component: 2050  -  total flux cleaned = 0.000238939 Jy
! Component: 2100  -  total flux cleaned = 0.000193504 Jy
! Component: 2150  -  total flux cleaned = 0.000193676 Jy
! Component: 2200  -  total flux cleaned = 0.00020875 Jy
! Component: 2250  -  total flux cleaned = 0.000208709 Jy
! Component: 2300  -  total flux cleaned = 0.000208743 Jy
! Component: 2350  -  total flux cleaned = 0.000223508 Jy
! Component: 2400  -  total flux cleaned = 0.000223464 Jy
! Component: 2450  -  total flux cleaned = 0.000208827 Jy
! Component: 2500  -  total flux cleaned = 0.00022357 Jy
! Component: 2550  -  total flux cleaned = 0.000223546 Jy
! Component: 2600  -  total flux cleaned = 0.000252815 Jy
! Component: 2650  -  total flux cleaned = 0.000252829 Jy
! Component: 2700  -  total flux cleaned = 0.000296755 Jy
! Component: 2750  -  total flux cleaned = 0.000282083 Jy
! Component: 2800  -  total flux cleaned = 0.000326015 Jy
! Component: 2850  -  total flux cleaned = 0.000355379 Jy
! Component: 2900  -  total flux cleaned = 0.000399422 Jy
! Component: 2950  -  total flux cleaned = 0.000443473 Jy
! Component: 3000  -  total flux cleaned = 0.000487779 Jy
! Component: 3050  -  total flux cleaned = 0.000546784 Jy
! Component: 3100  -  total flux cleaned = 0.000576259 Jy
! Component: 3150  -  total flux cleaned = 0.00062068 Jy
! Component: 3200  -  total flux cleaned = 0.000709714 Jy
! Component: 3250  -  total flux cleaned = 0.000769186 Jy
! Component: 3300  -  total flux cleaned = 0.000828769 Jy
! Component: 3350  -  total flux cleaned = 0.000888466 Jy
! Component: 3400  -  total flux cleaned = 0.000948303 Jy
! Component: 3450  -  total flux cleaned = 0.00102328 Jy
! Component: 3500  -  total flux cleaned = 0.0010835 Jy
! Component: 3550  -  total flux cleaned = 0.0011439 Jy
! Component: 3600  -  total flux cleaned = 0.00120441 Jy
! Component: 3650  -  total flux cleaned = 0.00128042 Jy
! Component: 3700  -  total flux cleaned = 0.00134155 Jy
! Component: 3750  -  total flux cleaned = 0.00140279 Jy
! Component: 3800  -  total flux cleaned = 0.00147991 Jy
! Component: 3850  -  total flux cleaned = 0.00154196 Jy
! Component: 3900  -  total flux cleaned = 0.00160444 Jy
! Component: 3950  -  total flux cleaned = 0.00165142 Jy
! Component: 4000  -  total flux cleaned = 0.00171446 Jy
! Component: 4050  -  total flux cleaned = 0.00177799 Jy
! Total flux subtracted in 4096 components = 0.00182598 Jy
! Clean residual min=-0.000981 max=0.001019 Jy/beam
! Clean residual mean=0.000006 rms=0.000290 Jy/beam
! Combined flux in latest and established models = 0.146108 Jy
keep
! Adding 307 model components to the UV plane model.
! The established model now contains 416 components and 0.146108 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/g0/scr/pima/npcsb_uvs/J0415+7753_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 9.809 x 11.9 at 39.76 degrees (North through East)
! Clean map  min=-0.003022  max=0.077987 Jy/beam
! Writing clean map to FITS file: /g0/scr/pima/npcsb_uvs/J0415+7753_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0779873 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00028076 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.08002 1.08002 2.16005 4.32009 8.64018 17.2804 34.5607 69.1215
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0008 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.077 
quit
! Quitting program
! Log file /g0/scr/pima/npcsb_uvs/J0415+7753_S_uvs.log closed on Wed Sep 25 00:09:05 2013