! Started logfile: /g0/scr/pima/npcsb_uvs/J0410+8208_X_uvs.log on Wed Sep 25 00:03:45 2013
obs /g0/scr/pima/npcsb_uvs/J0410+8208_X_uva.fits
! Reading UV FITS file: /g0/scr/pima/npcsb_uvs/J0410+8208_X_uva.fits
! AN table 1: 46 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.693237 visibilities/baseline/integration-bin.
! Found source: J0410+8208
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.40993e+09        8e+06          1        8e+06
!  02        2  8.47993e+09        8e+06          1        8e+06
!  03        3  8.79493e+09        8e+06          1        8e+06
!  04        4  8.89993e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 5740 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.2 
print "taper_size =",taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsb_uvs/J0410+8208_X]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 51 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 51 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 51 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 51 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.002557Jy  sigma=2.300202
! Fit after  self-cal, rms=0.952071Jy  sigma=2.195077
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8181 mas, bmaj=3.425 mas, bpa=-8.274 degrees
! Estimated noise=8.78947 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0390598 Jy
! Component: 100  -  total flux cleaned = 0.0482495 Jy
! Total flux subtracted in 100 components = 0.0482495 Jy
! Clean residual min=-0.005867 max=0.007590 Jy/beam
! Clean residual mean=-0.000008 rms=0.001590 Jy/beam
! Combined flux in latest and established models = 0.0482495 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 15 components and 0.0482495 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.082917Jy  sigma=0.174633
! Fit after  self-cal, rms=0.080993Jy  sigma=0.170201
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.082 mas, bmaj=3.473 mas, bpa=-9.42 degrees
! Estimated noise=4.20522 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00743955 Jy
! Component: 100  -  total flux cleaned = 0.0115329 Jy
! Component: 150  -  total flux cleaned = 0.0141737 Jy
! Component: 200  -  total flux cleaned = 0.015901 Jy
! Total flux subtracted in 200 components = 0.015901 Jy
! Clean residual min=-0.004012 max=0.003697 Jy/beam
! Clean residual mean=-0.000006 rms=0.000890 Jy/beam
! Combined flux in latest and established models = 0.0641505 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 38 components and 0.0641505 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.080290Jy  sigma=0.168273
! Fit after  self-cal, rms=0.080235Jy  sigma=0.168085
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.07     HN        1.01     KP        0.94     
!   LA        1.09     MK        1.00*    NL        1.21     OV        1.03     
!   PT        0.93     SC        1.01     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.19     FD        1.06     HN        0.97     KP        0.84     
!   LA        0.91     MK        1.00*    NL        1.13     OV        0.93     
!   PT        0.94     SC        1.22     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.92     FD        1.04     HN        1.06     KP        0.82     
!   LA        0.90     MK        1.00*    NL        1.07     OV        1.02     
!   PT        0.95     SC        0.93     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.86     FD        1.08     HN        0.87     KP        0.92     
!   LA        0.95     MK        1.00*    NL        0.93     OV        0.96     
!   PT        1.17     SC        0.92     
! 
! 
! Fit before self-cal, rms=0.080235Jy  sigma=0.168085
! Fit after  self-cal, rms=0.077473Jy  sigma=0.167247
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.079 mas, bmaj=3.487 mas, bpa=-9.487 degrees
! Estimated noise=4.09526 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000768308 Jy
! Component: 100  -  total flux cleaned = 0.000856177 Jy
! Component: 150  -  total flux cleaned = 0.000954569 Jy
! Component: 200  -  total flux cleaned = 0.0010228 Jy
! Total flux subtracted in 200 components = 0.0010228 Jy
! Clean residual min=-0.003633 max=0.002884 Jy/beam
! Clean residual mean=-0.000003 rms=0.000762 Jy/beam
! Combined flux in latest and established models = 0.0651733 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 48 components and 0.0651733 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.077442Jy  sigma=0.167200
! Fit after  self-cal, rms=0.077461Jy  sigma=0.166938
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.077461Jy  sigma=0.166938
! Fit after  self-cal, rms=0.077100Jy  sigma=0.166892
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.077 mas, bmaj=3.481 mas, bpa=-9.64 degrees
! Estimated noise=4.0588 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000349408 Jy
! Component: 100  -  total flux cleaned = 0.000489949 Jy
! Component: 150  -  total flux cleaned = 0.000557281 Jy
! Component: 200  -  total flux cleaned = 0.000637344 Jy
! Total flux subtracted in 200 components = 0.000637344 Jy
! Clean residual min=-0.003720 max=0.002875 Jy/beam
! Clean residual mean=-0.000003 rms=0.000753 Jy/beam
! Combined flux in latest and established models = 0.0658107 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 54 components and 0.0658107 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.077077Jy  sigma=0.166865
! Fit after  self-cal, rms=0.077060Jy  sigma=0.166766
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.18031e-05 Jy
! Component: 100  -  total flux cleaned = 2.16351e-05 Jy
! Component: 150  -  total flux cleaned = 2.48637e-06 Jy
! Component: 200  -  total flux cleaned = -1.52405e-05 Jy
! Total flux subtracted in 200 components = -1.52405e-05 Jy
! Clean residual min=-0.003807 max=0.002850 Jy/beam
! Clean residual mean=-0.000004 rms=0.000752 Jy/beam
! Combined flux in latest and established models = 0.0657954 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 57 components and 0.0657954 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.077049Jy  sigma=0.166751
! Fit after  self-cal, rms=0.077046Jy  sigma=0.166742
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.077046Jy  sigma=0.166742
! Fit after  self-cal, rms=0.076443Jy  sigma=0.166705
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.076 mas, bmaj=3.462 mas, bpa=-9.688 degrees
! Estimated noise=4.02665 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000259799 Jy
! Component: 100  -  total flux cleaned = 0.000427997 Jy
! Component: 150  -  total flux cleaned = 0.000483386 Jy
! Component: 200  -  total flux cleaned = 0.000517232 Jy
! Total flux subtracted in 200 components = 0.000517232 Jy
! Clean residual min=-0.003770 max=0.002849 Jy/beam
! Clean residual mean=-0.000004 rms=0.000740 Jy/beam
! Combined flux in latest and established models = 0.0663127 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 57 components and 0.0663127 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.076431Jy  sigma=0.166694
! Fit after  self-cal, rms=0.076435Jy  sigma=0.166688
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.21651e-05 Jy
! Component: 100  -  total flux cleaned = -2.17095e-05 Jy
! Component: 150  -  total flux cleaned = -5.39549e-06 Jy
! Component: 200  -  total flux cleaned = -5.59786e-06 Jy
! Total flux subtracted in 200 components = -5.59786e-06 Jy
! Clean residual min=-0.003780 max=0.002873 Jy/beam
! Clean residual mean=-0.000004 rms=0.000740 Jy/beam
! Combined flux in latest and established models = 0.0663071 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 57 components and 0.0663071 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.076426Jy  sigma=0.166679
! Fit after  self-cal, rms=0.076427Jy  sigma=0.166678
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.076427Jy  sigma=0.166678
! Fit after  self-cal, rms=0.075740Jy  sigma=0.166651
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.24 mas, bmaj=3.685 mas, bpa=-9.059 degrees
! Estimated noise=4.66394 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000235689 Jy
! Component: 100  -  total flux cleaned = 0.000352491 Jy
! Component: 150  -  total flux cleaned = 0.000403554 Jy
! Component: 200  -  total flux cleaned = 0.000450274 Jy
! Total flux subtracted in 200 components = 0.000450274 Jy
! Clean residual min=-0.002984 max=0.002898 Jy/beam
! Clean residual mean=-0.000006 rms=0.000825 Jy/beam
! Combined flux in latest and established models = 0.0667573 Jy
selfcal
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 62 components and 0.0667573 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.075734Jy  sigma=0.166647
! Fit after  self-cal, rms=0.075726Jy  sigma=0.166640
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.72072e-06 Jy
! Component: 100  -  total flux cleaned = 2.31172e-05 Jy
! Component: 150  -  total flux cleaned = 5.28419e-05 Jy
! Component: 200  -  total flux cleaned = 9.34611e-05 Jy
! Total flux subtracted in 200 components = 9.34611e-05 Jy
! Clean residual min=-0.003004 max=0.002891 Jy/beam
! Clean residual mean=-0.000006 rms=0.000825 Jy/beam
! Combined flux in latest and established models = 0.0668508 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 63 components and 0.0668508 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.075722Jy  sigma=0.166640
! Fit after  self-cal, rms=0.075718Jy  sigma=0.166636
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.073 mas, bmaj=3.45 mas, bpa=-9.707 degrees
! Estimated noise=3.99395 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.073 x 3.45 at -9.707 degrees (North through East)
! Clean map  min=-0.0034883  max=0.052349 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8146 mas, bmaj=3.411 mas, bpa=-8.633 degrees
! Estimated noise=8.26694 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0389176 Jy
! Component: 100  -  total flux cleaned = 0.0489831 Jy
! Component: 150  -  total flux cleaned = 0.0544377 Jy
! Component: 200  -  total flux cleaned = 0.0581051 Jy
! Total flux subtracted in 200 components = 0.0581051 Jy
! Clean residual min=-0.005680 max=0.006347 Jy/beam
! Clean residual mean=-0.000006 rms=0.001361 Jy/beam
! Combined flux in latest and established models = 0.0581052 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 18 model components to the UV plane model.
! The established model now contains 18 components and 0.0581052 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.073 mas, bmaj=3.45 mas, bpa=-9.707 degrees
! Estimated noise=3.99395 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00386761 Jy
! Component: 100  -  total flux cleaned = 0.00575059 Jy
! Component: 150  -  total flux cleaned = 0.00693043 Jy
! Component: 200  -  total flux cleaned = 0.00747092 Jy
! Total flux subtracted in 200 components = 0.00747092 Jy
! Clean residual min=-0.004014 max=0.002792 Jy/beam
! Clean residual mean=-0.000005 rms=0.000755 Jy/beam
! Combined flux in latest and established models = 0.0655761 Jy
! Adding 22 model components to the UV plane model.
! The established model now contains 37 components and 0.0655761 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.24 mas, bmaj=3.685 mas, bpa=-9.059 degrees
! Estimated noise=4.66394 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000705602 Jy
! Component: 100  -  total flux cleaned = 0.000890626 Jy
! Component: 150  -  total flux cleaned = 0.000979491 Jy
! Component: 200  -  total flux cleaned = 0.00103863 Jy
! Total flux subtracted in 200 components = 0.00103863 Jy
! Clean residual min=-0.003109 max=0.002841 Jy/beam
! Clean residual mean=-0.000007 rms=0.000840 Jy/beam
! Combined flux in latest and established models = 0.0666147 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.26418e-05 Jy
! Component: 100  -  total flux cleaned = 0.000100448 Jy
! Component: 150  -  total flux cleaned = 0.000130066 Jy
! Component: 200  -  total flux cleaned = 0.000144179 Jy
! Total flux subtracted in 200 components = 0.000144179 Jy
! Clean residual min=-0.003114 max=0.002832 Jy/beam
! Clean residual mean=-0.000006 rms=0.000835 Jy/beam
! Combined flux in latest and established models = 0.0667589 Jy
! Adding 12 model components to the UV plane model.
! The established model now contains 43 components and 0.0667589 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.073 mas, bmaj=3.45 mas, bpa=-9.707 degrees
! Estimated noise=3.99395 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000276998 Jy
! Component: 100  -  total flux cleaned = -0.00020136 Jy
! Component: 150  -  total flux cleaned = -0.000222797 Jy
! Component: 200  -  total flux cleaned = -0.000261602 Jy
! Total flux subtracted in 200 components = -0.000261602 Jy
! Clean residual min=-0.004001 max=0.002963 Jy/beam
! Clean residual mean=-0.000004 rms=0.000741 Jy/beam
! Combined flux in latest and established models = 0.0664973 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 48 components and 0.0664973 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.075730Jy  sigma=0.166693
! Fit after  self-cal, rms=0.075730Jy  sigma=0.166681
wmodel /g0/scr/pima/npcsb_uvs/J0410+8208_X_map.mod
! Writing 48 model components to file: /g0/scr/pima/npcsb_uvs/J0410+8208_X_map.mod
wobs /g0/scr/pima/npcsb_uvs/J0410+8208_X_uvs.fits
! Writing UV FITS file: /g0/scr/pima/npcsb_uvs/J0410+8208_X_uvs.fits
wwins /g0/scr/pima/npcsb_uvs/J0410+8208_X_map.win
! wwins: Wrote 1 windows to /g0/scr/pima/npcsb_uvs/J0410+8208_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00124352 Jy
! Component: 100  -  total flux cleaned = -0.00194943 Jy
! Component: 150  -  total flux cleaned = -0.00232304 Jy
! Component: 200  -  total flux cleaned = -0.00258589 Jy
! Component: 250  -  total flux cleaned = -0.00283407 Jy
! Component: 300  -  total flux cleaned = -0.00291318 Jy
! Component: 350  -  total flux cleaned = -0.00302727 Jy
! Component: 400  -  total flux cleaned = -0.00317391 Jy
! Component: 450  -  total flux cleaned = -0.00324493 Jy
! Component: 500  -  total flux cleaned = -0.00327895 Jy
! Component: 550  -  total flux cleaned = -0.00324626 Jy
! Component: 600  -  total flux cleaned = -0.00324676 Jy
! Component: 650  -  total flux cleaned = -0.00315154 Jy
! Component: 700  -  total flux cleaned = -0.00302782 Jy
! Component: 750  -  total flux cleaned = -0.00311982 Jy
! Component: 800  -  total flux cleaned = -0.00308883 Jy
! Component: 850  -  total flux cleaned = -0.00302959 Jy
! Component: 900  -  total flux cleaned = -0.00302996 Jy
! Component: 950  -  total flux cleaned = -0.00308665 Jy
! Component: 1000  -  total flux cleaned = -0.00317009 Jy
! Component: 1050  -  total flux cleaned = -0.00322504 Jy
! Component: 1100  -  total flux cleaned = -0.00338773 Jy
! Component: 1150  -  total flux cleaned = -0.00333392 Jy
! Component: 1200  -  total flux cleaned = -0.00338705 Jy
! Component: 1250  -  total flux cleaned = -0.00343887 Jy
! Component: 1300  -  total flux cleaned = -0.00354131 Jy
! Component: 1350  -  total flux cleaned = -0.00356613 Jy
! Component: 1400  -  total flux cleaned = -0.00356583 Jy
! Component: 1450  -  total flux cleaned = -0.00356588 Jy
! Component: 1500  -  total flux cleaned = -0.00366299 Jy
! Component: 1550  -  total flux cleaned = -0.00363855 Jy
! Component: 1600  -  total flux cleaned = -0.0036149 Jy
! Component: 1650  -  total flux cleaned = -0.00363842 Jy
! Component: 1700  -  total flux cleaned = -0.0036384 Jy
! Component: 1750  -  total flux cleaned = -0.00363809 Jy
! Component: 1800  -  total flux cleaned = -0.00350199 Jy
! Component: 1850  -  total flux cleaned = -0.00350229 Jy
! Component: 1900  -  total flux cleaned = -0.00343628 Jy
! Component: 1950  -  total flux cleaned = -0.00348043 Jy
! Component: 2000  -  total flux cleaned = -0.00341526 Jy
! Component: 2050  -  total flux cleaned = -0.00337221 Jy
! Component: 2100  -  total flux cleaned = -0.00337198 Jy
! Component: 2150  -  total flux cleaned = -0.00330872 Jy
! Component: 2200  -  total flux cleaned = -0.00330884 Jy
! Component: 2250  -  total flux cleaned = -0.00341257 Jy
! Component: 2300  -  total flux cleaned = -0.00341215 Jy
! Component: 2350  -  total flux cleaned = -0.00337125 Jy
! Component: 2400  -  total flux cleaned = -0.00343219 Jy
! Component: 2450  -  total flux cleaned = -0.00343195 Jy
! Component: 2500  -  total flux cleaned = -0.00353205 Jy
! Component: 2550  -  total flux cleaned = -0.00351218 Jy
! Component: 2600  -  total flux cleaned = -0.00359107 Jy
! Component: 2650  -  total flux cleaned = -0.00353218 Jy
! Component: 2700  -  total flux cleaned = -0.00361025 Jy
! Component: 2750  -  total flux cleaned = -0.00361038 Jy
! Component: 2800  -  total flux cleaned = -0.00359105 Jy
! Component: 2850  -  total flux cleaned = -0.00364843 Jy
! Component: 2900  -  total flux cleaned = -0.00368651 Jy
! Component: 2950  -  total flux cleaned = -0.00366754 Jy
! Component: 3000  -  total flux cleaned = -0.00378025 Jy
! Component: 3050  -  total flux cleaned = -0.00376167 Jy
! Component: 3100  -  total flux cleaned = -0.00376172 Jy
! Component: 3150  -  total flux cleaned = -0.0037618 Jy
! Component: 3200  -  total flux cleaned = -0.00381674 Jy
! Component: 3250  -  total flux cleaned = -0.00379852 Jy
! Component: 3300  -  total flux cleaned = -0.0037622 Jy
! Component: 3350  -  total flux cleaned = -0.00379844 Jy
! Component: 3400  -  total flux cleaned = -0.00378034 Jy
! Component: 3450  -  total flux cleaned = -0.00376254 Jy
! Component: 3500  -  total flux cleaned = -0.00376262 Jy
! Component: 3550  -  total flux cleaned = -0.00374481 Jy
! Component: 3600  -  total flux cleaned = -0.00367424 Jy
! Component: 3650  -  total flux cleaned = -0.00367416 Jy
! Component: 3700  -  total flux cleaned = -0.00362177 Jy
! Component: 3750  -  total flux cleaned = -0.00363927 Jy
! Component: 3800  -  total flux cleaned = -0.00358721 Jy
! Component: 3850  -  total flux cleaned = -0.00362184 Jy
! Component: 3900  -  total flux cleaned = -0.00362188 Jy
! Component: 3950  -  total flux cleaned = -0.00365617 Jy
! Component: 4000  -  total flux cleaned = -0.00362209 Jy
! Component: 4050  -  total flux cleaned = -0.00358804 Jy
! Total flux subtracted in 4096 components = -0.0035541 Jy
! Clean residual min=-0.000940 max=0.000879 Jy/beam
! Clean residual mean=-0.000001 rms=0.000306 Jy/beam
! Combined flux in latest and established models = 0.0629432 Jy
keep
! Adding 277 model components to the UV plane model.
! The established model now contains 325 components and 0.0629432 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/g0/scr/pima/npcsb_uvs/J0410+8208_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.073 x 3.45 at -9.707 degrees (North through East)
! Clean map  min=-0.0029761  max=0.051725 Jy/beam
! Writing clean map to FITS file: /g0/scr/pima/npcsb_uvs/J0410+8208_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0517246 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000303656 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.76119 1.76119 3.52238 7.04475 14.0895 28.179 56.358
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0009 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.051 
quit
! Quitting program
! Log file /g0/scr/pima/npcsb_uvs/J0410+8208_X_uvs.log closed on Wed Sep 25 00:03:50 2013