! Started logfile: /g0/scr/pima/npcsb_uvs/J0410+8208_S_uvs.log on Wed Sep 25 00:08:55 2013
obs /g0/scr/pima/npcsb_uvs/J0410+8208_S_uva.fits
! Reading UV FITS file: /g0/scr/pima/npcsb_uvs/J0410+8208_S_uva.fits
! AN table 1: 46 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.978261 visibilities/baseline/integration-bin.
! Found source: J0410+8208
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23693e+09        8e+06          1        8e+06
!  02        2  2.26693e+09        8e+06          1        8e+06
!  03        3  2.35693e+09        8e+06          1        8e+06
!  04        4  2.37693e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 8100 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsb_uvs/J0410+8208_S]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 5 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 5 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 5 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 5 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.959850Jy  sigma=1.981796
! Fit after  self-cal, rms=0.877055Jy  sigma=1.817577
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.178 mas, bmaj=10.56 mas, bpa=3.708 degrees
! Estimated noise=8.58347 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.092757 Jy
! Component: 100  -  total flux cleaned = 0.115945 Jy
! Total flux subtracted in 100 components = 0.115945 Jy
! Clean residual min=-0.009530 max=0.011111 Jy/beam
! Clean residual mean=0.000000 rms=0.002115 Jy/beam
! Combined flux in latest and established models = 0.115945 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.115945 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.103450Jy  sigma=0.187348
! Fit after  self-cal, rms=0.103427Jy  sigma=0.187314
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.005 mas, bmaj=10.75 mas, bpa=3.498 degrees
! Estimated noise=3.92095 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0143645 Jy
! Component: 100  -  total flux cleaned = 0.0218224 Jy
! Component: 150  -  total flux cleaned = 0.0264116 Jy
! Component: 200  -  total flux cleaned = 0.0293059 Jy
! Total flux subtracted in 200 components = 0.0293059 Jy
! Clean residual min=-0.007618 max=0.009649 Jy/beam
! Clean residual mean=0.000007 rms=0.002100 Jy/beam
! Combined flux in latest and established models = 0.145251 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 29 components and 0.145251 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.101057Jy  sigma=0.183502
! Fit after  self-cal, rms=0.100986Jy  sigma=0.183394
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.91     FD        0.95     HN        0.89     KP        0.88     
!   LA        1.00     MK        0.92     NL        1.18     OV        1.10     
!   PT        0.95     SC        0.96     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.98     HN        1.00     KP        0.94     
!   LA        0.95     MK        0.92     NL        1.25     OV        1.09     
!   PT        0.94     SC        0.95     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.11     FD        0.99     HN        0.98     KP        0.94     
!   LA        0.82     MK        1.07     NL        1.34     OV        1.10     
!   PT        1.08     SC        1.01     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.93     FD        0.98     HN        0.93     KP        0.90     
!   LA        0.69     MK        1.09     NL        1.31     OV        0.90     
!   PT        0.87     SC        1.17     
! 
! 
! Fit before self-cal, rms=0.100986Jy  sigma=0.183394
! Fit after  self-cal, rms=0.095445Jy  sigma=0.177992
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.03 mas, bmaj=10.59 mas, bpa=3.441 degrees
! Estimated noise=3.86764 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-7, 7.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00738305 Jy
! Component: 100  -  total flux cleaned = 0.0109811 Jy
! Component: 150  -  total flux cleaned = 0.0115516 Jy
! Component: 200  -  total flux cleaned = 0.011473 Jy
! Total flux subtracted in 200 components = 0.011473 Jy
! Clean residual min=-0.004062 max=0.004200 Jy/beam
! Clean residual mean=0.000003 rms=0.001023 Jy/beam
! Combined flux in latest and established models = 0.156724 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 58 components and 0.156724 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.094910Jy  sigma=0.176678
! Fit after  self-cal, rms=0.094932Jy  sigma=0.176453
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.094932Jy  sigma=0.176453
! Fit after  self-cal, rms=0.094505Jy  sigma=0.176337
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.019 mas, bmaj=10.6 mas, bpa=3.535 degrees
! Estimated noise=3.84058 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00273365 Jy
! Component: 100  -  total flux cleaned = 0.00337478 Jy
! Component: 150  -  total flux cleaned = 0.00366253 Jy
! Component: 200  -  total flux cleaned = 0.00361596 Jy
! Total flux subtracted in 200 components = 0.00361596 Jy
! Clean residual min=-0.003764 max=0.003911 Jy/beam
! Clean residual mean=0.000002 rms=0.000912 Jy/beam
! Combined flux in latest and established models = 0.16034 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 79 components and 0.16034 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.094404Jy  sigma=0.176094
! Fit after  self-cal, rms=0.094407Jy  sigma=0.176076
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-121, -117).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00373185 Jy
! Component: 100  -  total flux cleaned = 0.00446495 Jy
! Component: 150  -  total flux cleaned = 0.00464123 Jy
! Component: 200  -  total flux cleaned = 0.0046939 Jy
! Total flux subtracted in 200 components = 0.0046939 Jy
! Clean residual min=-0.003666 max=0.003330 Jy/beam
! Clean residual mean=-0.000000 rms=0.000818 Jy/beam
! Combined flux in latest and established models = 0.165034 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 100 components and 0.165034 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.094236Jy  sigma=0.175698
! Fit after  self-cal, rms=0.094222Jy  sigma=0.175676
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.094222Jy  sigma=0.175676
! Fit after  self-cal, rms=0.094486Jy  sigma=0.175610
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.021 mas, bmaj=10.6 mas, bpa=3.581 degrees
! Estimated noise=3.83756 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00152988 Jy
! Component: 100  -  total flux cleaned = 0.00188327 Jy
! Component: 150  -  total flux cleaned = 0.00192827 Jy
! Component: 200  -  total flux cleaned = 0.00196853 Jy
! Total flux subtracted in 200 components = 0.00196853 Jy
! Clean residual min=-0.003415 max=0.003130 Jy/beam
! Clean residual mean=-0.000000 rms=0.000777 Jy/beam
! Combined flux in latest and established models = 0.167002 Jy
selfcal
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 119 components and 0.167002 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.094440Jy  sigma=0.175506
! Fit after  self-cal, rms=0.094444Jy  sigma=0.175503
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000249861 Jy
! Component: 100  -  total flux cleaned = 0.000289296 Jy
! Component: 150  -  total flux cleaned = 0.000289451 Jy
! Component: 200  -  total flux cleaned = 0.000324485 Jy
! Total flux subtracted in 200 components = 0.000324485 Jy
! Clean residual min=-0.003398 max=0.003126 Jy/beam
! Clean residual mean=-0.000000 rms=0.000764 Jy/beam
! Combined flux in latest and established models = 0.167327 Jy
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 134 components and 0.167327 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.094418Jy  sigma=0.175449
! Fit after  self-cal, rms=0.094417Jy  sigma=0.175448
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.094417Jy  sigma=0.175448
! Fit after  self-cal, rms=0.094711Jy  sigma=0.175422
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.322 mas, bmaj=12.07 mas, bpa=3.808 degrees
! Estimated noise=4.74683 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000617039 Jy
! Component: 100  -  total flux cleaned = 0.000974434 Jy
! Component: 150  -  total flux cleaned = 0.00123395 Jy
! Component: 200  -  total flux cleaned = 0.00136615 Jy
! Total flux subtracted in 200 components = 0.00136615 Jy
! Clean residual min=-0.003765 max=0.002940 Jy/beam
! Clean residual mean=-0.000000 rms=0.000902 Jy/beam
! Combined flux in latest and established models = 0.168693 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 153 components and 0.168693 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.094695Jy  sigma=0.175379
! Fit after  self-cal, rms=0.094694Jy  sigma=0.175374
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.90539e-06 Jy
! Component: 100  -  total flux cleaned = 0.000134767 Jy
! Component: 150  -  total flux cleaned = 0.000238851 Jy
! Component: 200  -  total flux cleaned = 0.000262685 Jy
! Total flux subtracted in 200 components = 0.000262685 Jy
! Clean residual min=-0.003727 max=0.002889 Jy/beam
! Clean residual mean=-0.000000 rms=0.000880 Jy/beam
! Combined flux in latest and established models = 0.168955 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 160 components and 0.168955 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.094689Jy  sigma=0.175361
! Fit after  self-cal, rms=0.094685Jy  sigma=0.175360
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.022 mas, bmaj=10.61 mas, bpa=3.607 degrees
! Estimated noise=3.84105 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.022 x 10.61 at 3.607 degrees (North through East)
! Clean map  min=-0.0032598  max=0.12424 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.175 mas, bmaj=10.33 mas, bpa=3.687 degrees
! Estimated noise=8.43205 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0906929 Jy
! Component: 100  -  total flux cleaned = 0.114765 Jy
! Component: 150  -  total flux cleaned = 0.127378 Jy
! Component: 200  -  total flux cleaned = 0.134965 Jy
! Total flux subtracted in 200 components = 0.134965 Jy
! Clean residual min=-0.006748 max=0.007900 Jy/beam
! Clean residual mean=0.000001 rms=0.001616 Jy/beam
! Combined flux in latest and established models = 0.134965 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 22 model components to the UV plane model.
! The established model now contains 22 components and 0.134965 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.022 mas, bmaj=10.61 mas, bpa=3.607 degrees
! Estimated noise=3.84105 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00828821 Jy
! Component: 100  -  total flux cleaned = 0.0140065 Jy
! Component: 150  -  total flux cleaned = 0.0184246 Jy
! Component: 200  -  total flux cleaned = 0.0219566 Jy
! Total flux subtracted in 200 components = 0.0219566 Jy
! Clean residual min=-0.003498 max=0.003853 Jy/beam
! Clean residual mean=0.000001 rms=0.000942 Jy/beam
! Combined flux in latest and established models = 0.156922 Jy
! Adding 38 model components to the UV plane model.
! The established model now contains 58 components and 0.156922 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.322 mas, bmaj=12.07 mas, bpa=3.808 degrees
! Estimated noise=4.74683 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00439396 Jy
! Component: 100  -  total flux cleaned = 0.00710144 Jy
! Component: 150  -  total flux cleaned = 0.00836976 Jy
! Component: 200  -  total flux cleaned = 0.00894078 Jy
! Total flux subtracted in 200 components = 0.00894078 Jy
! Clean residual min=-0.004270 max=0.003111 Jy/beam
! Clean residual mean=0.000000 rms=0.001010 Jy/beam
! Combined flux in latest and established models = 0.165862 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000377473 Jy
! Component: 100  -  total flux cleaned = 0.000659165 Jy
! Component: 150  -  total flux cleaned = 0.000814251 Jy
! Component: 200  -  total flux cleaned = 0.00109807 Jy
! Total flux subtracted in 200 components = 0.00109807 Jy
! Clean residual min=-0.004029 max=0.003006 Jy/beam
! Clean residual mean=0.000000 rms=0.000940 Jy/beam
! Combined flux in latest and established models = 0.16696 Jy
! Adding 80 model components to the UV plane model.
! The established model now contains 133 components and 0.16696 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.022 mas, bmaj=10.61 mas, bpa=3.607 degrees
! Estimated noise=3.84105 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00030541 Jy
! Component: 100  -  total flux cleaned = 0.000311953 Jy
! Component: 150  -  total flux cleaned = 0.000312121 Jy
! Component: 200  -  total flux cleaned = 0.000311057 Jy
! Total flux subtracted in 200 components = 0.000311057 Jy
! Clean residual min=-0.003331 max=0.003155 Jy/beam
! Clean residual mean=0.000000 rms=0.000757 Jy/beam
! Combined flux in latest and established models = 0.167271 Jy
selfcal
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 159 components and 0.167272 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.094742Jy  sigma=0.175515
! Fit after  self-cal, rms=0.094749Jy  sigma=0.175491
wmodel /g0/scr/pima/npcsb_uvs/J0410+8208_S_map.mod
! Writing 159 model components to file: /g0/scr/pima/npcsb_uvs/J0410+8208_S_map.mod
wobs /g0/scr/pima/npcsb_uvs/J0410+8208_S_uvs.fits
! Writing UV FITS file: /g0/scr/pima/npcsb_uvs/J0410+8208_S_uvs.fits
wwins /g0/scr/pima/npcsb_uvs/J0410+8208_S_map.win
! wwins: Wrote 3 windows to /g0/scr/pima/npcsb_uvs/J0410+8208_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000380744 Jy
! Component: 100  -  total flux cleaned = -0.000324925 Jy
! Component: 150  -  total flux cleaned = -0.000125363 Jy
! Component: 200  -  total flux cleaned = 0.000157845 Jy
! Component: 250  -  total flux cleaned = 0.000293128 Jy
! Component: 300  -  total flux cleaned = 0.0003817 Jy
! Component: 350  -  total flux cleaned = 0.000464557 Jy
! Component: 400  -  total flux cleaned = 0.000383958 Jy
! Component: 450  -  total flux cleaned = 0.000228795 Jy
! Component: 500  -  total flux cleaned = 0.000116884 Jy
! Component: 550  -  total flux cleaned = 4.44594e-05 Jy
! Component: 600  -  total flux cleaned = -6.23539e-05 Jy
! Component: 650  -  total flux cleaned = -9.67156e-05 Jy
! Component: 700  -  total flux cleaned = -6.28402e-05 Jy
! Component: 750  -  total flux cleaned = -3.06042e-05 Jy
! Component: 800  -  total flux cleaned = -0.000129009 Jy
! Component: 850  -  total flux cleaned = -6.52163e-05 Jy
! Component: 900  -  total flux cleaned = -0.000159758 Jy
! Component: 950  -  total flux cleaned = -0.000220948 Jy
! Component: 1000  -  total flux cleaned = -0.000160844 Jy
! Component: 1050  -  total flux cleaned = -0.000279649 Jy
! Component: 1100  -  total flux cleaned = -0.000192505 Jy
! Component: 1150  -  total flux cleaned = -0.000278299 Jy
! Component: 1200  -  total flux cleaned = -0.000222187 Jy
! Component: 1250  -  total flux cleaned = -0.000194175 Jy
! Component: 1300  -  total flux cleaned = -3.14645e-06 Jy
! Component: 1350  -  total flux cleaned = 0.000104066 Jy
! Component: 1400  -  total flux cleaned = 0.000156787 Jy
! Component: 1450  -  total flux cleaned = 0.000156799 Jy
! Component: 1500  -  total flux cleaned = 0.000338417 Jy
! Component: 1550  -  total flux cleaned = 0.000440697 Jy
! Component: 1600  -  total flux cleaned = 0.000491159 Jy
! Component: 1650  -  total flux cleaned = 0.000541289 Jy
! Component: 1700  -  total flux cleaned = 0.00059068 Jy
! Component: 1750  -  total flux cleaned = 0.000663792 Jy
! Component: 1800  -  total flux cleaned = 0.000712165 Jy
! Component: 1850  -  total flux cleaned = 0.000784098 Jy
! Component: 1900  -  total flux cleaned = 0.000808253 Jy
! Component: 1950  -  total flux cleaned = 0.000901919 Jy
! Component: 2000  -  total flux cleaned = 0.000924997 Jy
! Component: 2050  -  total flux cleaned = 0.00106214 Jy
! Component: 2100  -  total flux cleaned = 0.0010619 Jy
! Component: 2150  -  total flux cleaned = 0.00121895 Jy
! Component: 2200  -  total flux cleaned = 0.00132984 Jy
! Component: 2250  -  total flux cleaned = 0.00139588 Jy
! Component: 2300  -  total flux cleaned = 0.00148306 Jy
! Component: 2350  -  total flux cleaned = 0.00161262 Jy
! Component: 2400  -  total flux cleaned = 0.00178337 Jy
! Component: 2450  -  total flux cleaned = 0.00180445 Jy
! Component: 2500  -  total flux cleaned = 0.00188864 Jy
! Component: 2550  -  total flux cleaned = 0.00195112 Jy
! Component: 2600  -  total flux cleaned = 0.00213676 Jy
! Component: 2650  -  total flux cleaned = 0.00211612 Jy
! Component: 2700  -  total flux cleaned = 0.00229904 Jy
! Component: 2750  -  total flux cleaned = 0.0023194 Jy
! Component: 2800  -  total flux cleaned = 0.00253923 Jy
! Component: 2850  -  total flux cleaned = 0.00259901 Jy
! Component: 2900  -  total flux cleaned = 0.00277618 Jy
! Component: 2950  -  total flux cleaned = 0.00295224 Jy
! Component: 3000  -  total flux cleaned = 0.00301061 Jy
! Component: 3050  -  total flux cleaned = 0.0031651 Jy
! Component: 3100  -  total flux cleaned = 0.00331847 Jy
! Component: 3150  -  total flux cleaned = 0.00347045 Jy
! Component: 3200  -  total flux cleaned = 0.00352738 Jy
! Component: 3250  -  total flux cleaned = 0.00365848 Jy
! Component: 3300  -  total flux cleaned = 0.00371426 Jy
! Component: 3350  -  total flux cleaned = 0.0038625 Jy
! Component: 3400  -  total flux cleaned = 0.00397295 Jy
! Component: 3450  -  total flux cleaned = 0.00406455 Jy
! Component: 3500  -  total flux cleaned = 0.00417356 Jy
! Component: 3550  -  total flux cleaned = 0.00422786 Jy
! Component: 3600  -  total flux cleaned = 0.00435368 Jy
! Component: 3650  -  total flux cleaned = 0.00449661 Jy
! Component: 3700  -  total flux cleaned = 0.00463858 Jy
! Component: 3750  -  total flux cleaned = 0.00470923 Jy
! Component: 3800  -  total flux cleaned = 0.00481426 Jy
! Component: 3850  -  total flux cleaned = 0.00490147 Jy
! Component: 3900  -  total flux cleaned = 0.00497078 Jy
! Component: 3950  -  total flux cleaned = 0.00505691 Jy
! Component: 4000  -  total flux cleaned = 0.00510838 Jy
! Component: 4050  -  total flux cleaned = 0.00521077 Jy
! Total flux subtracted in 4096 components = 0.00526164 Jy
! Clean residual min=-0.000963 max=0.001029 Jy/beam
! Clean residual mean=0.000001 rms=0.000320 Jy/beam
! Combined flux in latest and established models = 0.172533 Jy
keep
! Adding 314 model components to the UV plane model.
! The established model now contains 473 components and 0.172533 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/g0/scr/pima/npcsb_uvs/J0410+8208_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.022 x 10.61 at 3.607 degrees (North through East)
! Clean map  min=-0.0027074  max=0.12336 Jy/beam
! Writing clean map to FITS file: /g0/scr/pima/npcsb_uvs/J0410+8208_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.123363 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000320119 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.778483 0.778483 1.55697 3.11393 6.22787 12.4557 24.9115 49.8229 99.6459
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0009 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.123 
quit
! Quitting program
! Log file /g0/scr/pima/npcsb_uvs/J0410+8208_S_uvs.log closed on Wed Sep 25 00:09:00 2013