! Started logfile: /g0/scr/pima/npcsb_uvs/J0339-0146_S_uvs.log on Wed Sep 25 00:08:50 2013 obs /g0/scr/pima/npcsb_uvs/J0339-0146_S_uva.fits ! Reading UV FITS file: /g0/scr/pima/npcsb_uvs/J0339-0146_S_uva.fits ! AN table 1: 7 integrations on 45 of 45 possible baselines. ! Apparent sampling: 1 visibilities/baseline/integration-bin. ! Found source: J0339-0146 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23693e+09 8e+06 1 8e+06 ! 02 2 2.26693e+09 8e+06 1 8e+06 ! 03 3 2.35693e+09 8e+06 1 8e+06 ! 04 4 2.37693e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 1260 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsb_uvs/J0339-0146_S] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.378358Jy sigma=16.878523 ! Fit after self-cal, rms=1.179456Jy sigma=8.564041 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.635 mas, bmaj=6.782 mas, bpa=-2.495 degrees ! Estimated noise=3.43893 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.47519 Jy ! Component: 100 - total flux cleaned = 1.92533 Jy ! Total flux subtracted in 100 components = 1.92533 Jy ! Clean residual min=-0.104706 max=0.204299 Jy/beam ! Clean residual mean=0.000109 rms=0.034903 Jy/beam ! Combined flux in latest and established models = 1.92533 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 1.92533 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.539925Jy sigma=3.719662 ! Fit after self-cal, rms=0.539896Jy sigma=3.719450 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.053 mas, bmaj=7.683 mas, bpa=-2.421 degrees ! Estimated noise=2.81441 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.260229 Jy ! Component: 100 - total flux cleaned = 0.377441 Jy ! Component: 150 - total flux cleaned = 0.444028 Jy ! Component: 200 - total flux cleaned = 0.483626 Jy ! Total flux subtracted in 200 components = 0.483626 Jy ! Clean residual min=-0.086256 max=0.167507 Jy/beam ! Clean residual mean=0.000034 rms=0.026538 Jy/beam ! Combined flux in latest and established models = 2.40895 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 30 components and 2.40895 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.405003Jy sigma=2.741761 ! Fit after self-cal, rms=0.404991Jy sigma=2.741605 ! Inverting map ! Added new window around map position (6.5, 3). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.140221 Jy ! Component: 100 - total flux cleaned = 0.164884 Jy ! Component: 150 - total flux cleaned = 0.178328 Jy ! Component: 200 - total flux cleaned = 0.181481 Jy ! Total flux subtracted in 200 components = 0.181481 Jy ! Clean residual min=-0.085790 max=0.130190 Jy/beam ! Clean residual mean=-0.000046 rms=0.019873 Jy/beam ! Combined flux in latest and established models = 2.59043 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 60 components and 2.59043 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.350949Jy sigma=2.336821 ! Fit after self-cal, rms=0.343955Jy sigma=2.282897 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.97 HN 0.97 KP 0.96 ! LA 1.08 MK 0.88 NL 1.13 OV 0.98 ! PT 1.07 SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.99 HN 0.99 KP 0.97 ! LA 1.03 MK 0.94 NL 1.20 OV 0.97 ! PT 1.01 SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.02 HN 1.03 KP 0.97 ! LA 0.85 MK 1.08 NL 1.31 OV 1.04 ! PT 1.11 SC 1.04 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.04 HN 0.96 KP 0.91 ! LA 0.73 MK 1.08 NL 1.26 OV 0.85 ! PT 0.97 SC 1.14 ! ! ! Fit before self-cal, rms=0.343955Jy sigma=2.282897 ! Fit after self-cal, rms=0.137450Jy sigma=0.920114 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.06 mas, bmaj=7.734 mas, bpa=-2.5 degrees ! Estimated noise=2.86351 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0133388 Jy ! Component: 100 - total flux cleaned = -0.0204599 Jy ! Component: 150 - total flux cleaned = -0.0250183 Jy ! Component: 200 - total flux cleaned = -0.0286178 Jy ! Total flux subtracted in 200 components = -0.0286178 Jy ! Clean residual min=-0.024874 max=0.019621 Jy/beam ! Clean residual mean=-0.000004 rms=0.005090 Jy/beam ! Combined flux in latest and established models = 2.56182 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 80 components and 2.56182 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127071Jy sigma=0.858199 ! Fit after self-cal, rms=0.126779Jy sigma=0.856748 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126779Jy sigma=0.856748 ! Fit after self-cal, rms=0.125248Jy sigma=0.846261 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.06 mas, bmaj=7.738 mas, bpa=-2.535 degrees ! Estimated noise=2.85654 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0108824 Jy ! Component: 100 - total flux cleaned = -0.01421 Jy ! Component: 150 - total flux cleaned = -0.0165729 Jy ! Component: 200 - total flux cleaned = -0.0165909 Jy ! Total flux subtracted in 200 components = -0.0165909 Jy ! Clean residual min=-0.021195 max=0.016817 Jy/beam ! Clean residual mean=-0.000007 rms=0.004330 Jy/beam ! Combined flux in latest and established models = 2.54523 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 101 components and 2.54522 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121209Jy sigma=0.823617 ! Fit after self-cal, rms=0.120925Jy sigma=0.822562 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00207267 Jy ! Component: 100 - total flux cleaned = -0.00233833 Jy ! Component: 150 - total flux cleaned = -0.00232055 Jy ! Component: 200 - total flux cleaned = -0.00186486 Jy ! Total flux subtracted in 200 components = -0.00186486 Jy ! Clean residual min=-0.020028 max=0.015751 Jy/beam ! Clean residual mean=-0.000005 rms=0.004153 Jy/beam ! Combined flux in latest and established models = 2.54336 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 114 components and 2.54336 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119720Jy sigma=0.815421 ! Fit after self-cal, rms=0.119638Jy sigma=0.815192 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119638Jy sigma=0.815192 ! Fit after self-cal, rms=0.118514Jy sigma=0.807151 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.061 mas, bmaj=7.739 mas, bpa=-2.503 degrees ! Estimated noise=2.85427 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0107324 Jy ! Component: 100 - total flux cleaned = -0.0122459 Jy ! Component: 150 - total flux cleaned = -0.0122418 Jy ! Component: 200 - total flux cleaned = -0.0122397 Jy ! Total flux subtracted in 200 components = -0.0122397 Jy ! Clean residual min=-0.017644 max=0.013980 Jy/beam ! Clean residual mean=-0.000006 rms=0.003638 Jy/beam ! Combined flux in latest and established models = 2.53112 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 119 components and 2.53112 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116695Jy sigma=0.796579 ! Fit after self-cal, rms=0.116473Jy sigma=0.795578 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00245852 Jy ! Component: 100 - total flux cleaned = -0.00283632 Jy ! Component: 150 - total flux cleaned = -0.0028326 Jy ! Component: 200 - total flux cleaned = -0.00298137 Jy ! Total flux subtracted in 200 components = -0.00298137 Jy ! Clean residual min=-0.016833 max=0.013425 Jy/beam ! Clean residual mean=-0.000004 rms=0.003508 Jy/beam ! Combined flux in latest and established models = 2.52814 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 132 components and 2.52814 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115952Jy sigma=0.791986 ! Fit after self-cal, rms=0.115878Jy sigma=0.791723 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115878Jy sigma=0.791723 ! Fit after self-cal, rms=0.115139Jy sigma=0.786800 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.698 mas, bmaj=12.56 mas, bpa=1.275 degrees ! Estimated noise=3.48428 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0107225 Jy ! Component: 100 - total flux cleaned = -0.0109869 Jy ! Component: 150 - total flux cleaned = -0.010525 Jy ! Component: 200 - total flux cleaned = -0.0101375 Jy ! Total flux subtracted in 200 components = -0.0101375 Jy ! Clean residual min=-0.020738 max=0.014120 Jy/beam ! Clean residual mean=-0.000008 rms=0.004284 Jy/beam ! Combined flux in latest and established models = 2.518 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 147 components and 2.518 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114489Jy sigma=0.782873 ! Fit after self-cal, rms=0.114278Jy sigma=0.781760 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00178273 Jy ! Component: 100 - total flux cleaned = -0.00167744 Jy ! Component: 150 - total flux cleaned = -0.00167139 Jy ! Component: 200 - total flux cleaned = -0.0016721 Jy ! Total flux subtracted in 200 components = -0.0016721 Jy ! Clean residual min=-0.019408 max=0.013700 Jy/beam ! Clean residual mean=-0.000006 rms=0.004079 Jy/beam ! Combined flux in latest and established models = 2.51633 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 155 components and 2.51633 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114247Jy sigma=0.780890 ! Fit after self-cal, rms=0.114189Jy sigma=0.780706 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.062 mas, bmaj=7.739 mas, bpa=-2.458 degrees ! Estimated noise=2.85265 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.062 x 7.739 at -2.458 degrees (North through East) ! Clean map min=-0.014983 max=1.9565 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114189Jy sigma=0.780706 ! Fit after self-cal, rms=0.108599Jy sigma=0.728030 ! Inverting map and beam ! Estimated beam: bmin=3.061 mas, bmaj=7.738 mas, bpa=-2.447 degrees ! Estimated noise=2.85048 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00775597 Jy ! Component: 100 - total flux cleaned = -0.00879875 Jy ! Component: 150 - total flux cleaned = -0.00913062 Jy ! Component: 200 - total flux cleaned = -0.00926609 Jy ! Total flux subtracted in 200 components = -0.00926609 Jy ! Clean residual min=-0.013731 max=0.011118 Jy/beam ! Clean residual mean=-0.000003 rms=0.002860 Jy/beam ! Combined flux in latest and established models = 2.50706 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 165 components and 2.50706 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107767Jy sigma=0.722894 ! Fit after self-cal, rms=0.107647Jy sigma=0.722277 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00217374 Jy ! Component: 100 - total flux cleaned = -0.00230612 Jy ! Component: 150 - total flux cleaned = -0.00242284 Jy ! Component: 200 - total flux cleaned = -0.00242441 Jy ! Total flux subtracted in 200 components = -0.00242441 Jy ! Clean residual min=-0.013250 max=0.010813 Jy/beam ! Clean residual mean=-0.000002 rms=0.002775 Jy/beam ! Combined flux in latest and established models = 2.50464 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 175 components and 2.50464 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107370Jy sigma=0.720402 ! Fit after self-cal, rms=0.107337Jy sigma=0.720272 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107337Jy sigma=0.720272 ! Fit after self-cal, rms=0.107038Jy sigma=0.718329 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.635 mas, bmaj=6.824 mas, bpa=-2.377 degrees ! Estimated noise=3.52209 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.51075 Jy ! Component: 100 - total flux cleaned = 1.97441 Jy ! Component: 150 - total flux cleaned = 2.18255 Jy ! Component: 200 - total flux cleaned = 2.28584 Jy ! Total flux subtracted in 200 components = 2.28584 Jy ! Clean residual min=-0.030599 max=0.050819 Jy/beam ! Clean residual mean=0.000044 rms=0.009433 Jy/beam ! Combined flux in latest and established models = 2.28584 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 2.28584 Jy ! Inverting map and beam ! Estimated beam: bmin=3.062 mas, bmaj=7.738 mas, bpa=-2.409 degrees ! Estimated noise=2.84963 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0813822 Jy ! Component: 100 - total flux cleaned = 0.1273 Jy ! Component: 150 - total flux cleaned = 0.15652 Jy ! Component: 200 - total flux cleaned = 0.176202 Jy ! Total flux subtracted in 200 components = 0.176202 Jy ! Clean residual min=-0.015463 max=0.015253 Jy/beam ! Clean residual mean=0.000017 rms=0.003470 Jy/beam ! Combined flux in latest and established models = 2.46205 Jy ! Adding 49 model components to the UV plane model. ! The established model now contains 59 components and 2.46205 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.712 mas, bmaj=12.56 mas, bpa=1.426 degrees ! Estimated noise=3.47864 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.019962 Jy ! Component: 100 - total flux cleaned = 0.0288581 Jy ! Component: 150 - total flux cleaned = 0.0338878 Jy ! Component: 200 - total flux cleaned = 0.0359777 Jy ! Total flux subtracted in 200 components = 0.0359777 Jy ! Clean residual min=-0.016719 max=0.010541 Jy/beam ! Clean residual mean=-0.000002 rms=0.003475 Jy/beam ! Combined flux in latest and established models = 2.49802 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000298753 Jy ! Component: 100 - total flux cleaned = 0.000388931 Jy ! Component: 150 - total flux cleaned = 0.000389869 Jy ! Component: 200 - total flux cleaned = 0.000392453 Jy ! Total flux subtracted in 200 components = 0.000392453 Jy ! Clean residual min=-0.016211 max=0.010476 Jy/beam ! Clean residual mean=-0.000003 rms=0.003400 Jy/beam ! Combined flux in latest and established models = 2.49842 Jy ! Adding 61 model components to the UV plane model. ! The established model now contains 116 components and 2.49842 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.062 mas, bmaj=7.738 mas, bpa=-2.409 degrees ! Estimated noise=2.84963 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00373236 Jy ! Component: 100 - total flux cleaned = -0.00354954 Jy ! Component: 150 - total flux cleaned = -0.00336962 Jy ! Component: 200 - total flux cleaned = -0.00291988 Jy ! Total flux subtracted in 200 components = -0.00291988 Jy ! Clean residual min=-0.013120 max=0.009546 Jy/beam ! Clean residual mean=-0.000001 rms=0.002690 Jy/beam ! Combined flux in latest and established models = 2.4955 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 133 components and 2.4955 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107108Jy sigma=0.717860 ! Fit after self-cal, rms=0.106975Jy sigma=0.716982 wmodel /g0/scr/pima/npcsb_uvs/J0339-0146_S_map.mod ! Writing 133 model components to file: /g0/scr/pima/npcsb_uvs/J0339-0146_S_map.mod wobs /g0/scr/pima/npcsb_uvs/J0339-0146_S_uvs.fits ! Writing UV FITS file: /g0/scr/pima/npcsb_uvs/J0339-0146_S_uvs.fits wwins /g0/scr/pima/npcsb_uvs/J0339-0146_S_map.win ! wwins: Wrote 2 windows to /g0/scr/pima/npcsb_uvs/J0339-0146_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00553742 Jy ! Component: 100 - total flux cleaned = -0.00865497 Jy ! Component: 150 - total flux cleaned = -0.00998674 Jy ! Component: 200 - total flux cleaned = -0.0112282 Jy ! Component: 250 - total flux cleaned = -0.0122501 Jy ! Component: 300 - total flux cleaned = -0.0128075 Jy ! Component: 350 - total flux cleaned = -0.0129413 Jy ! Component: 400 - total flux cleaned = -0.0132015 Jy ! Component: 450 - total flux cleaned = -0.0132041 Jy ! Component: 500 - total flux cleaned = -0.0132047 Jy ! Component: 550 - total flux cleaned = -0.0129757 Jy ! Component: 600 - total flux cleaned = -0.0124157 Jy ! Component: 650 - total flux cleaned = -0.012093 Jy ! Component: 700 - total flux cleaned = -0.0117737 Jy ! Component: 750 - total flux cleaned = -0.0111562 Jy ! Component: 800 - total flux cleaned = -0.0108527 Jy ! Component: 850 - total flux cleaned = -0.0103629 Jy ! Component: 900 - total flux cleaned = -0.0101737 Jy ! Component: 950 - total flux cleaned = -0.00998703 Jy ! Component: 1000 - total flux cleaned = -0.00962102 Jy ! Component: 1050 - total flux cleaned = -0.00944371 Jy ! Component: 1100 - total flux cleaned = -0.0091809 Jy ! Component: 1150 - total flux cleaned = -0.00892593 Jy ! Component: 1200 - total flux cleaned = -0.00892749 Jy ! Component: 1250 - total flux cleaned = -0.00860193 Jy ! Component: 1300 - total flux cleaned = -0.0088434 Jy ! Component: 1350 - total flux cleaned = -0.00868613 Jy ! Component: 1400 - total flux cleaned = -0.008687 Jy ! Component: 1450 - total flux cleaned = -0.00898627 Jy ! Component: 1500 - total flux cleaned = -0.00890811 Jy ! Component: 1550 - total flux cleaned = -0.00876199 Jy ! Component: 1600 - total flux cleaned = -0.00890571 Jy ! Component: 1650 - total flux cleaned = -0.00897722 Jy ! Component: 1700 - total flux cleaned = -0.00884088 Jy ! Component: 1750 - total flux cleaned = -0.00904309 Jy ! Component: 1800 - total flux cleaned = -0.00917403 Jy ! Component: 1850 - total flux cleaned = -0.0093688 Jy ! Component: 1900 - total flux cleaned = -0.00936879 Jy ! Component: 1950 - total flux cleaned = -0.00949491 Jy ! Component: 2000 - total flux cleaned = -0.00974585 Jy ! Component: 2050 - total flux cleaned = -0.010114 Jy ! Component: 2100 - total flux cleaned = -0.0101729 Jy ! Component: 2150 - total flux cleaned = -0.0102909 Jy ! Component: 2200 - total flux cleaned = -0.0104082 Jy ! Component: 2250 - total flux cleaned = -0.010408 Jy ! Component: 2300 - total flux cleaned = -0.0106369 Jy ! Component: 2350 - total flux cleaned = -0.0106375 Jy ! Component: 2400 - total flux cleaned = -0.0109154 Jy ! Component: 2450 - total flux cleaned = -0.0107517 Jy ! Component: 2500 - total flux cleaned = -0.0109692 Jy ! Component: 2550 - total flux cleaned = -0.0110755 Jy ! Component: 2600 - total flux cleaned = -0.0110758 Jy ! Component: 2650 - total flux cleaned = -0.0110761 Jy ! Component: 2700 - total flux cleaned = -0.0113321 Jy ! Component: 2750 - total flux cleaned = -0.0112815 Jy ! Component: 2800 - total flux cleaned = -0.0115312 Jy ! Component: 2850 - total flux cleaned = -0.0117282 Jy ! Component: 2900 - total flux cleaned = -0.0119712 Jy ! Component: 2950 - total flux cleaned = -0.0122599 Jy ! Component: 3000 - total flux cleaned = -0.0124986 Jy ! Component: 3050 - total flux cleaned = -0.0126398 Jy ! Component: 3100 - total flux cleaned = -0.0129661 Jy ! Component: 3150 - total flux cleaned = -0.0131047 Jy ! Component: 3200 - total flux cleaned = -0.0132422 Jy ! Component: 3250 - total flux cleaned = -0.0134682 Jy ! Component: 3300 - total flux cleaned = -0.0134686 Jy ! Component: 3350 - total flux cleaned = -0.0136016 Jy ! Component: 3400 - total flux cleaned = -0.0136462 Jy ! Component: 3450 - total flux cleaned = -0.0137334 Jy ! Component: 3500 - total flux cleaned = -0.0138629 Jy ! Component: 3550 - total flux cleaned = -0.0139483 Jy ! Component: 3600 - total flux cleaned = -0.0139913 Jy ! Component: 3650 - total flux cleaned = -0.0141604 Jy ! Component: 3700 - total flux cleaned = -0.0143702 Jy ! Component: 3750 - total flux cleaned = -0.0144538 Jy ! Component: 3800 - total flux cleaned = -0.0147021 Jy ! Component: 3850 - total flux cleaned = -0.0148255 Jy ! Component: 3900 - total flux cleaned = -0.014948 Jy ! Component: 3950 - total flux cleaned = -0.0152725 Jy ! Component: 4000 - total flux cleaned = -0.0153123 Jy ! Component: 4050 - total flux cleaned = -0.0156328 Jy ! Total flux subtracted in 4096 components = -0.0155536 Jy ! Clean residual min=-0.002265 max=0.002031 Jy/beam ! Clean residual mean=0.000002 rms=0.000715 Jy/beam ! Combined flux in latest and established models = 2.47994 Jy keep ! Adding 288 model components to the UV plane model. ! The established model now contains 421 components and 2.47994 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/g0/scr/pima/npcsb_uvs/J0339-0146_S\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.062 x 7.738 at -2.409 degrees (North through East) ! Clean map min=-0.0054745 max=1.971 Jy/beam ! Writing clean map to FITS file: /g0/scr/pima/npcsb_uvs/J0339-0146_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.97096 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000685083 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.104276 0.104276 0.208553 0.417106 0.834212 1.66842 3.33685 6.67369 13.3474 26.6948 53.3895 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.002 print "peak=",int(1000*peak_flux)/1000 ! peak= 1.97 quit ! Quitting program ! Log file /g0/scr/pima/npcsb_uvs/J0339-0146_S_uvs.log closed on Wed Sep 25 00:08:55 2013