! Started logfile: /g0/scr/pima/npcsb_uvs/J0300+8202_X_uvs.log on Wed Sep 25 00:03:27 2013 obs /g0/scr/pima/npcsb_uvs/J0300+8202_X_uva.fits ! Reading UV FITS file: /g0/scr/pima/npcsb_uvs/J0300+8202_X_uva.fits ! AN table 1: 46 integrations on 15 of 15 possible baselines. ! Apparent sampling: 0.866667 visibilities/baseline/integration-bin. ! Found source: J0300+8202 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40993e+09 8e+06 1 8e+06 ! 02 2 8.47993e+09 8e+06 1 8e+06 ! 03 3 8.79493e+09 8e+06 1 8e+06 ! 04 4 8.89993e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 2392 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsb_uvs/J0300+8202_X] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.023760Jy sigma=2.517668 ! Fit after self-cal, rms=0.923898Jy sigma=2.264510 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.777 mas, bmaj=5.657 mas, bpa=38.34 degrees ! Estimated noise=14.774 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0606502 Jy ! Component: 100 - total flux cleaned = 0.0828642 Jy ! Total flux subtracted in 100 components = 0.0828642 Jy ! Clean residual min=-0.011646 max=0.011855 Jy/beam ! Clean residual mean=-0.000143 rms=0.005227 Jy/beam ! Combined flux in latest and established models = 0.0828642 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 37 components and 0.0828642 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076704Jy sigma=0.183379 ! Fit after self-cal, rms=0.075247Jy sigma=0.180006 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.016 mas, bmaj=5.903 mas, bpa=42.57 degrees ! Estimated noise=5.96133 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.015097 Jy ! Component: 100 - total flux cleaned = 0.0228691 Jy ! Component: 150 - total flux cleaned = 0.0253995 Jy ! Component: 200 - total flux cleaned = 0.0273467 Jy ! Total flux subtracted in 200 components = 0.0273467 Jy ! Clean residual min=-0.003684 max=0.003685 Jy/beam ! Clean residual mean=-0.000048 rms=0.001842 Jy/beam ! Combined flux in latest and established models = 0.110211 Jy ! Performing phase self-cal ! Adding 93 model components to the UV plane model. ! The established model now contains 130 components and 0.110211 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071156Jy sigma=0.168260 ! Fit after self-cal, rms=0.070942Jy sigma=0.167739 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.07 KP 1.14 LA 0.98 ! OV 0.97 PT 0.90 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.01 KP 1.13 LA 0.90 ! OV 0.99 PT 0.92 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.04 KP 0.90 LA 0.88 ! OV 1.05 PT 0.92 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.06 KP 0.98 LA 0.84 ! OV 1.00 PT 0.93 ! ! ! Fit before self-cal, rms=0.070942Jy sigma=0.167739 ! Fit after self-cal, rms=0.068810Jy sigma=0.165571 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.053 mas, bmaj=5.973 mas, bpa=42.02 degrees ! Estimated noise=5.71991 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00249252 Jy ! Component: 100 - total flux cleaned = 0.00349302 Jy ! Component: 150 - total flux cleaned = 0.00369824 Jy ! Component: 200 - total flux cleaned = 0.00379191 Jy ! Total flux subtracted in 200 components = 0.00379191 Jy ! Clean residual min=-0.001433 max=0.001419 Jy/beam ! Clean residual mean=-0.000004 rms=0.000488 Jy/beam ! Combined flux in latest and established models = 0.114003 Jy ! Performing phase self-cal ! Adding 51 model components to the UV plane model. ! The established model now contains 181 components and 0.114003 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068382Jy sigma=0.164597 ! Fit after self-cal, rms=0.068373Jy sigma=0.164254 ! Inverting map ! Added new window around map position (-32.2, -12.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00156577 Jy ! Component: 100 - total flux cleaned = 0.00150503 Jy ! Component: 150 - total flux cleaned = 0.00162916 Jy ! Component: 200 - total flux cleaned = 0.001729 Jy ! Total flux subtracted in 200 components = 0.001729 Jy ! Clean residual min=-0.001957 max=0.002075 Jy/beam ! Clean residual mean=0.000004 rms=0.000549 Jy/beam ! Combined flux in latest and established models = 0.115732 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 203 components and 0.115732 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068269Jy sigma=0.164042 ! Fit after self-cal, rms=0.068198Jy sigma=0.163981 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068198Jy sigma=0.163981 ! Fit after self-cal, rms=0.067550Jy sigma=0.163955 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.054 mas, bmaj=5.969 mas, bpa=42.04 degrees ! Estimated noise=5.67234 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000337494 Jy ! Component: 100 - total flux cleaned = 0.000310368 Jy ! Component: 150 - total flux cleaned = 0.000126984 Jy ! Component: 200 - total flux cleaned = 2.66877e-05 Jy ! Total flux subtracted in 200 components = 2.66877e-05 Jy ! Clean residual min=-0.002037 max=0.002027 Jy/beam ! Clean residual mean=0.000005 rms=0.000551 Jy/beam ! Combined flux in latest and established models = 0.115759 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 228 components and 0.115759 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067502Jy sigma=0.163874 ! Fit after self-cal, rms=0.067436Jy sigma=0.163838 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000158976 Jy ! Component: 100 - total flux cleaned = 0.000159106 Jy ! Component: 150 - total flux cleaned = 9.09701e-05 Jy ! Component: 200 - total flux cleaned = -2.66791e-05 Jy ! Total flux subtracted in 200 components = -2.66791e-05 Jy ! Clean residual min=-0.002132 max=0.002034 Jy/beam ! Clean residual mean=0.000006 rms=0.000554 Jy/beam ! Combined flux in latest and established models = 0.115732 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 248 components and 0.115732 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067410Jy sigma=0.163797 ! Fit after self-cal, rms=0.067400Jy sigma=0.163785 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067400Jy sigma=0.163785 ! Fit after self-cal, rms=0.067096Jy sigma=0.163745 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.054 mas, bmaj=5.962 mas, bpa=42.22 degrees ! Estimated noise=5.65419 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000262061 Jy ! Component: 100 - total flux cleaned = 0.000410587 Jy ! Component: 150 - total flux cleaned = 0.000334054 Jy ! Component: 200 - total flux cleaned = 0.000269381 Jy ! Total flux subtracted in 200 components = 0.000269381 Jy ! Clean residual min=-0.002172 max=0.002036 Jy/beam ! Clean residual mean=0.000006 rms=0.000546 Jy/beam ! Combined flux in latest and established models = 0.116001 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 261 components and 0.116001 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067077Jy sigma=0.163714 ! Fit after self-cal, rms=0.067064Jy sigma=0.163702 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.98392e-05 Jy ! Component: 100 - total flux cleaned = 0.000120348 Jy ! Component: 150 - total flux cleaned = 7.34702e-05 Jy ! Component: 200 - total flux cleaned = -5.2373e-05 Jy ! Total flux subtracted in 200 components = -5.2373e-05 Jy ! Clean residual min=-0.002163 max=0.002038 Jy/beam ! Clean residual mean=0.000006 rms=0.000547 Jy/beam ! Combined flux in latest and established models = 0.115949 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 275 components and 0.115949 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067053Jy sigma=0.163684 ! Fit after self-cal, rms=0.066989Jy sigma=0.163532 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066989Jy sigma=0.163532 ! Fit after self-cal, rms=0.066555Jy sigma=0.163492 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.313 mas, bmaj=6.194 mas, bpa=39.71 degrees ! Estimated noise=5.65059 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.80956e-05 Jy ! Component: 100 - total flux cleaned = -1.271e-05 Jy ! Component: 150 - total flux cleaned = -0.000110301 Jy ! Component: 200 - total flux cleaned = -0.000224174 Jy ! Total flux subtracted in 200 components = -0.000224174 Jy ! Clean residual min=-0.002137 max=0.002102 Jy/beam ! Clean residual mean=0.000007 rms=0.000595 Jy/beam ! Combined flux in latest and established models = 0.115725 Jy selfcal ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 299 components and 0.115725 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066543Jy sigma=0.163472 ! Fit after self-cal, rms=0.066513Jy sigma=0.163445 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000102582 Jy ! Component: 100 - total flux cleaned = -0.000100089 Jy ! Component: 150 - total flux cleaned = -0.000167974 Jy ! Component: 200 - total flux cleaned = -0.000267658 Jy ! Total flux subtracted in 200 components = -0.000267658 Jy ! Clean residual min=-0.002112 max=0.002049 Jy/beam ! Clean residual mean=0.000007 rms=0.000591 Jy/beam ! Combined flux in latest and established models = 0.115457 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 322 components and 0.115457 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066503Jy sigma=0.163430 ! Fit after self-cal, rms=0.066505Jy sigma=0.163424 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.054 mas, bmaj=5.954 mas, bpa=42.32 degrees ! Estimated noise=5.62829 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.054 x 5.954 at 42.32 degrees (North through East) ! Clean map min=-0.0033177 max=0.065059 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.815 mas, bmaj=5.719 mas, bpa=37.87 degrees ! Estimated noise=13.9291 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0446971 Jy ! Component: 100 - total flux cleaned = 0.0667295 Jy ! Component: 150 - total flux cleaned = 0.0836206 Jy ! Component: 200 - total flux cleaned = 0.0962839 Jy ! Total flux subtracted in 200 components = 0.0962839 Jy ! Clean residual min=-0.020277 max=0.038025 Jy/beam ! Clean residual mean=-0.000099 rms=0.007431 Jy/beam ! Combined flux in latest and established models = 0.0962838 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.0962838 Jy ! Inverting map and beam ! Estimated beam: bmin=3.054 mas, bmaj=5.954 mas, bpa=42.32 degrees ! Estimated noise=5.62829 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (31.8, 20). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0317272 Jy ! Component: 100 - total flux cleaned = 0.0397568 Jy ! Component: 150 - total flux cleaned = 0.0430664 Jy ! Component: 200 - total flux cleaned = 0.0440187 Jy ! Total flux subtracted in 200 components = 0.0440187 Jy ! Clean residual min=-0.007547 max=0.007696 Jy/beam ! Clean residual mean=-0.000009 rms=0.002136 Jy/beam ! Combined flux in latest and established models = 0.140303 Jy ! Adding 48 model components to the UV plane model. ! The established model now contains 73 components and 0.140303 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.313 mas, bmaj=6.194 mas, bpa=39.71 degrees ! Estimated noise=5.65059 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00199301 Jy ! Component: 100 - total flux cleaned = 0.00255556 Jy ! Component: 150 - total flux cleaned = 0.00340058 Jy ! Component: 200 - total flux cleaned = 0.00386791 Jy ! Total flux subtracted in 200 components = 0.00386791 Jy ! Clean residual min=-0.006102 max=0.006308 Jy/beam ! Clean residual mean=-0.000009 rms=0.001648 Jy/beam ! Combined flux in latest and established models = 0.14417 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000578483 Jy ! Component: 100 - total flux cleaned = 0.00110889 Jy ! Component: 150 - total flux cleaned = 0.00135529 Jy ! Component: 200 - total flux cleaned = 0.0014758 Jy ! Total flux subtracted in 200 components = 0.0014758 Jy ! Clean residual min=-0.005252 max=0.005345 Jy/beam ! Clean residual mean=-0.000006 rms=0.001377 Jy/beam ! Combined flux in latest and established models = 0.145646 Jy ! Adding 79 model components to the UV plane model. ! The established model now contains 148 components and 0.145646 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.054 mas, bmaj=5.954 mas, bpa=42.32 degrees ! Estimated noise=5.62829 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.86694e-05 Jy ! Component: 100 - total flux cleaned = 0.000407272 Jy ! Component: 150 - total flux cleaned = 0.000509051 Jy ! Component: 200 - total flux cleaned = 0.000701869 Jy ! Total flux subtracted in 200 components = 0.000701869 Jy ! Clean residual min=-0.004788 max=0.004564 Jy/beam ! Clean residual mean=-0.000004 rms=0.001197 Jy/beam ! Combined flux in latest and established models = 0.146348 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 173 components and 0.146348 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067724Jy sigma=0.166478 ! Fit after self-cal, rms=0.067167Jy sigma=0.165331 wmodel /g0/scr/pima/npcsb_uvs/J0300+8202_X_map.mod ! Writing 173 model components to file: /g0/scr/pima/npcsb_uvs/J0300+8202_X_map.mod wobs /g0/scr/pima/npcsb_uvs/J0300+8202_X_uvs.fits ! Writing UV FITS file: /g0/scr/pima/npcsb_uvs/J0300+8202_X_uvs.fits wwins /g0/scr/pima/npcsb_uvs/J0300+8202_X_map.win ! wwins: Wrote 2 windows to /g0/scr/pima/npcsb_uvs/J0300+8202_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000709987 Jy ! Component: 100 - total flux cleaned = -0.00121282 Jy ! Component: 150 - total flux cleaned = -0.0016206 Jy ! Component: 200 - total flux cleaned = -0.00190423 Jy ! Component: 250 - total flux cleaned = -0.00203702 Jy ! Component: 300 - total flux cleaned = -0.00199511 Jy ! Component: 350 - total flux cleaned = -0.00207645 Jy ! Component: 400 - total flux cleaned = -0.00207672 Jy ! Component: 450 - total flux cleaned = -0.00203881 Jy ! Component: 500 - total flux cleaned = -0.00196745 Jy ! Component: 550 - total flux cleaned = -0.00200199 Jy ! Component: 600 - total flux cleaned = -0.0020362 Jy ! Component: 650 - total flux cleaned = -0.00213506 Jy ! Component: 700 - total flux cleaned = -0.00213508 Jy ! Component: 750 - total flux cleaned = -0.00219836 Jy ! Component: 800 - total flux cleaned = -0.00219845 Jy ! Component: 850 - total flux cleaned = -0.00219886 Jy ! Component: 900 - total flux cleaned = -0.00225814 Jy ! Component: 950 - total flux cleaned = -0.00222964 Jy ! Component: 1000 - total flux cleaned = -0.00214432 Jy ! Component: 1050 - total flux cleaned = -0.00206016 Jy ! Component: 1100 - total flux cleaned = -0.00200489 Jy ! Component: 1150 - total flux cleaned = -0.0019231 Jy ! Component: 1200 - total flux cleaned = -0.00186917 Jy ! Component: 1250 - total flux cleaned = -0.00184222 Jy ! Component: 1300 - total flux cleaned = -0.00178955 Jy ! Component: 1350 - total flux cleaned = -0.00176344 Jy ! Component: 1400 - total flux cleaned = -0.00173765 Jy ! Component: 1450 - total flux cleaned = -0.00168677 Jy ! Component: 1500 - total flux cleaned = -0.00166173 Jy ! Component: 1550 - total flux cleaned = -0.00161176 Jy ! Component: 1600 - total flux cleaned = -0.00153735 Jy ! Component: 1650 - total flux cleaned = -0.00143922 Jy ! Component: 1700 - total flux cleaned = -0.0013419 Jy ! Component: 1750 - total flux cleaned = -0.00129351 Jy ! Component: 1800 - total flux cleaned = -0.00119713 Jy ! Component: 1850 - total flux cleaned = -0.0011491 Jy ! Component: 1900 - total flux cleaned = -0.00112521 Jy ! Component: 1950 - total flux cleaned = -0.00110145 Jy ! Component: 2000 - total flux cleaned = -0.00105358 Jy ! Component: 2050 - total flux cleaned = -0.000958178 Jy ! Component: 2100 - total flux cleaned = -0.000886701 Jy ! Component: 2150 - total flux cleaned = -0.000815032 Jy ! Component: 2200 - total flux cleaned = -0.000671953 Jy ! Component: 2250 - total flux cleaned = -0.000576233 Jy ! Component: 2300 - total flux cleaned = -0.000456588 Jy ! Component: 2350 - total flux cleaned = -0.000408572 Jy ! Component: 2400 - total flux cleaned = -0.000288541 Jy ! Component: 2450 - total flux cleaned = -0.000216248 Jy ! Component: 2500 - total flux cleaned = -9.55361e-05 Jy ! Component: 2550 - total flux cleaned = -4.70214e-05 Jy ! Component: 2600 - total flux cleaned = 7.46199e-05 Jy ! Component: 2650 - total flux cleaned = 0.00014791 Jy ! Component: 2700 - total flux cleaned = 0.00024585 Jy ! Component: 2750 - total flux cleaned = 0.000270467 Jy ! Component: 2800 - total flux cleaned = 0.000393667 Jy ! Component: 2850 - total flux cleaned = 0.000492795 Jy ! Component: 2900 - total flux cleaned = 0.000542689 Jy ! Component: 2950 - total flux cleaned = 0.000642884 Jy ! Component: 3000 - total flux cleaned = 0.000668108 Jy ! Component: 3050 - total flux cleaned = 0.000718902 Jy ! Component: 3100 - total flux cleaned = 0.000719168 Jy ! Component: 3150 - total flux cleaned = 0.000719181 Jy ! Component: 3200 - total flux cleaned = 0.000719036 Jy ! Component: 3250 - total flux cleaned = 0.000719206 Jy ! Component: 3300 - total flux cleaned = 0.000640417 Jy ! Component: 3350 - total flux cleaned = 0.000613597 Jy ! Component: 3400 - total flux cleaned = 0.000560148 Jy ! Component: 3450 - total flux cleaned = 0.000533263 Jy ! Component: 3500 - total flux cleaned = 0.00047917 Jy ! Component: 3550 - total flux cleaned = 0.000369703 Jy ! Component: 3600 - total flux cleaned = 0.000286828 Jy ! Component: 3650 - total flux cleaned = 0.000203597 Jy ! Component: 3700 - total flux cleaned = 9.10016e-05 Jy ! Component: 3750 - total flux cleaned = 5.77281e-06 Jy ! Component: 3800 - total flux cleaned = -0.000137188 Jy ! Component: 3850 - total flux cleaned = -0.000223527 Jy ! Component: 3900 - total flux cleaned = -0.000281949 Jy ! Component: 3950 - total flux cleaned = -0.000399852 Jy ! Component: 4000 - total flux cleaned = -0.000459711 Jy ! Component: 4050 - total flux cleaned = -0.000520103 Jy ! Total flux subtracted in 4096 components = -0.000550374 Jy ! Clean residual min=-0.001962 max=0.001872 Jy/beam ! Clean residual mean=0.000005 rms=0.000628 Jy/beam ! Combined flux in latest and established models = 0.145798 Jy keep ! Adding 275 model components to the UV plane model. ! The established model now contains 448 components and 0.145798 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/g0/scr/pima/npcsb_uvs/J0300+8202_X\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.054 x 5.954 at 42.32 degrees (North through East) ! Clean map min=-0.0076536 max=0.051137 Jy/beam ! Writing clean map to FITS file: /g0/scr/pima/npcsb_uvs/J0300+8202_X_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0511373 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000616619 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -3.61743 3.61743 7.23486 14.4697 28.9394 57.8789 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0018 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.051 quit ! Quitting program ! Log file /g0/scr/pima/npcsb_uvs/J0300+8202_X_uvs.log closed on Wed Sep 25 00:03:33 2013