! Started logfile: /g0/scr/pima/npcsb_uvs/J0300+8202_S_uvs.log on Wed Sep 25 00:08:39 2013 obs /g0/scr/pima/npcsb_uvs/J0300+8202_S_uva.fits ! Reading UV FITS file: /g0/scr/pima/npcsb_uvs/J0300+8202_S_uva.fits ! AN table 1: 46 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.933333 visibilities/baseline/integration-bin. ! Found source: J0300+8202 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23693e+09 8e+06 1 8e+06 ! 02 2 2.26693e+09 8e+06 1 8e+06 ! 03 3 2.35693e+09 8e+06 1 8e+06 ! 04 4 2.37693e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 7728 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsb_uvs/J0300+8202_S] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.076856Jy sigma=2.194867 ! Fit after self-cal, rms=0.764513Jy sigma=1.553556 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.606 mas, bmaj=9.893 mas, bpa=2.685 degrees ! Estimated noise=8.22683 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.157604 Jy ! Component: 100 - total flux cleaned = 0.237146 Jy ! Total flux subtracted in 100 components = 0.237146 Jy ! Clean residual min=-0.029729 max=0.049818 Jy/beam ! Clean residual mean=0.000064 rms=0.009898 Jy/beam ! Combined flux in latest and established models = 0.237146 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.237146 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.248926Jy sigma=0.497332 ! Fit after self-cal, rms=0.248395Jy sigma=0.496356 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.337 mas, bmaj=10.63 mas, bpa=1.507 degrees ! Estimated noise=4.00309 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.111861 Jy ! Component: 100 - total flux cleaned = 0.181164 Jy ! Component: 150 - total flux cleaned = 0.228026 Jy ! Component: 200 - total flux cleaned = 0.260196 Jy ! Total flux subtracted in 200 components = 0.260196 Jy ! Clean residual min=-0.037966 max=0.078171 Jy/beam ! Clean residual mean=0.000148 rms=0.013907 Jy/beam ! Combined flux in latest and established models = 0.497342 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 53 components and 0.497342 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.181502Jy sigma=0.362487 ! Fit after self-cal, rms=0.180811Jy sigma=0.360928 ! Inverting map ! Added new window around map position (-47, -120). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0747583 Jy ! Component: 100 - total flux cleaned = 0.113316 Jy ! Component: 150 - total flux cleaned = 0.140196 Jy ! Component: 200 - total flux cleaned = 0.161478 Jy ! Total flux subtracted in 200 components = 0.161478 Jy ! Clean residual min=-0.031835 max=0.050553 Jy/beam ! Clean residual mean=0.000132 rms=0.009400 Jy/beam ! Combined flux in latest and established models = 0.658819 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 88 components and 0.658819 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146668Jy sigma=0.284405 ! Fit after self-cal, rms=0.142580Jy sigma=0.274618 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.81 FD 0.92 HN 1.02 KP 0.84 ! LA 0.99 MK 1.27 NL 1.52 OV 0.96 ! PT 0.94 SC 0.93 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.96 HN 1.02 KP 0.86 ! LA 0.95 MK 1.37 NL 1.55 OV 0.97 ! PT 0.88 SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.07 HN 1.02 KP 0.87 ! LA 0.79 MK 1.44 NL 1.60 OV 1.06 ! PT 0.96 SC 1.11 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.06 HN 0.97 KP 0.81 ! LA 0.68 MK 1.32 NL 1.69 OV 0.90 ! PT 0.85 SC 1.19 ! ! ! Fit before self-cal, rms=0.142580Jy sigma=0.274618 ! Fit after self-cal, rms=0.118122Jy sigma=0.208482 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.522 mas, bmaj=10.52 mas, bpa=0.4075 degrees ! Estimated noise=4.10777 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0116219 Jy ! Component: 100 - total flux cleaned = 0.00984148 Jy ! Component: 150 - total flux cleaned = 0.00797081 Jy ! Component: 200 - total flux cleaned = 0.00735687 Jy ! Total flux subtracted in 200 components = 0.00735687 Jy ! Clean residual min=-0.013650 max=0.016706 Jy/beam ! Clean residual mean=0.000010 rms=0.004123 Jy/beam ! Combined flux in latest and established models = 0.666176 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 108 components and 0.666176 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114516Jy sigma=0.201249 ! Fit after self-cal, rms=0.114713Jy sigma=0.200346 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114713Jy sigma=0.200346 ! Fit after self-cal, rms=0.115504Jy sigma=0.199992 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.531 mas, bmaj=10.54 mas, bpa=0.4804 degrees ! Estimated noise=4.12243 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00103855 Jy ! Component: 100 - total flux cleaned = 0.000748472 Jy ! Component: 150 - total flux cleaned = 0.000758178 Jy ! Component: 200 - total flux cleaned = 0.000763383 Jy ! Total flux subtracted in 200 components = 0.000763383 Jy ! Clean residual min=-0.012381 max=0.015110 Jy/beam ! Clean residual mean=0.000005 rms=0.003887 Jy/beam ! Combined flux in latest and established models = 0.666939 Jy selfcal ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 124 components and 0.666939 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114020Jy sigma=0.197482 ! Fit after self-cal, rms=0.114009Jy sigma=0.197364 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0012977 Jy ! Component: 100 - total flux cleaned = 0.00109861 Jy ! Component: 150 - total flux cleaned = 0.000907194 Jy ! Component: 200 - total flux cleaned = 0.00053548 Jy ! Total flux subtracted in 200 components = 0.00053548 Jy ! Clean residual min=-0.011796 max=0.014629 Jy/beam ! Clean residual mean=0.000002 rms=0.003801 Jy/beam ! Combined flux in latest and established models = 0.667475 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 140 components and 0.667475 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113230Jy sigma=0.196115 ! Fit after self-cal, rms=0.113208Jy sigma=0.196053 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113208Jy sigma=0.196053 ! Fit after self-cal, rms=0.114658Jy sigma=0.195764 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.543 mas, bmaj=10.57 mas, bpa=0.4749 degrees ! Estimated noise=4.15349 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00102007 Jy ! Component: 100 - total flux cleaned = -0.00102515 Jy ! Component: 150 - total flux cleaned = -0.00121575 Jy ! Component: 200 - total flux cleaned = -0.00155306 Jy ! Total flux subtracted in 200 components = -0.00155306 Jy ! Clean residual min=-0.011947 max=0.014627 Jy/beam ! Clean residual mean=0.000003 rms=0.003744 Jy/beam ! Combined flux in latest and established models = 0.665922 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 155 components and 0.665922 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113933Jy sigma=0.194719 ! Fit after self-cal, rms=0.113936Jy sigma=0.194672 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000930101 Jy ! Component: 100 - total flux cleaned = 0.000768021 Jy ! Component: 150 - total flux cleaned = 0.000467759 Jy ! Component: 200 - total flux cleaned = 0.000325791 Jy ! Total flux subtracted in 200 components = 0.000325791 Jy ! Clean residual min=-0.011835 max=0.014491 Jy/beam ! Clean residual mean=0.000002 rms=0.003706 Jy/beam ! Combined flux in latest and established models = 0.666248 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 169 components and 0.666248 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113456Jy sigma=0.194027 ! Fit after self-cal, rms=0.113447Jy sigma=0.193992 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113447Jy sigma=0.193992 ! Fit after self-cal, rms=0.114637Jy sigma=0.193849 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.907 mas, bmaj=12.52 mas, bpa=5.038 degrees ! Estimated noise=4.72131 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000949757 Jy ! Component: 100 - total flux cleaned = -0.000944236 Jy ! Component: 150 - total flux cleaned = -0.000728605 Jy ! Component: 200 - total flux cleaned = -0.000551899 Jy ! Total flux subtracted in 200 components = -0.000551899 Jy ! Clean residual min=-0.017824 max=0.019100 Jy/beam ! Clean residual mean=-0.000000 rms=0.005742 Jy/beam ! Combined flux in latest and established models = 0.665696 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 176 components and 0.665696 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114834Jy sigma=0.193094 ! Fit after self-cal, rms=0.114789Jy sigma=0.192921 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00162444 Jy ! Component: 100 - total flux cleaned = 0.00206017 Jy ! Component: 150 - total flux cleaned = 0.00206149 Jy ! Component: 200 - total flux cleaned = 0.00184289 Jy ! Total flux subtracted in 200 components = 0.00184289 Jy ! Clean residual min=-0.017423 max=0.018451 Jy/beam ! Clean residual mean=-0.000004 rms=0.005507 Jy/beam ! Combined flux in latest and established models = 0.667538 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 186 components and 0.667538 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115080Jy sigma=0.192840 ! Fit after self-cal, rms=0.115060Jy sigma=0.192777 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.554 mas, bmaj=10.58 mas, bpa=0.3954 degrees ! Estimated noise=4.17688 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.554 x 10.58 at 0.3954 degrees (North through East) ! Clean map min=-0.018639 max=0.2848 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.735 mas, bmaj=9.591 mas, bpa=1.173 degrees ! Estimated noise=9.11586 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.169914 Jy ! Component: 100 - total flux cleaned = 0.254198 Jy ! Component: 150 - total flux cleaned = 0.315159 Jy ! Component: 200 - total flux cleaned = 0.36408 Jy ! Total flux subtracted in 200 components = 0.36408 Jy ! Clean residual min=-0.020365 max=0.029846 Jy/beam ! Clean residual mean=0.000049 rms=0.007334 Jy/beam ! Combined flux in latest and established models = 0.36408 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 30 model components to the UV plane model. ! The established model now contains 30 components and 0.36408 Jy ! Inverting map and beam ! Estimated beam: bmin=3.554 mas, bmaj=10.58 mas, bpa=0.3954 degrees ! Estimated noise=4.17688 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (2.5, -1.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0798319 Jy ! Component: 100 - total flux cleaned = 0.134706 Jy ! Component: 150 - total flux cleaned = 0.174425 Jy ! Component: 200 - total flux cleaned = 0.203928 Jy ! Total flux subtracted in 200 components = 0.203928 Jy ! Clean residual min=-0.017827 max=0.023311 Jy/beam ! Clean residual mean=0.000069 rms=0.006309 Jy/beam ! Combined flux in latest and established models = 0.568008 Jy ! Adding 85 model components to the UV plane model. ! The established model now contains 106 components and 0.568008 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.907 mas, bmaj=12.52 mas, bpa=5.038 degrees ! Estimated noise=4.72131 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0387942 Jy ! Component: 100 - total flux cleaned = 0.0639492 Jy ! Component: 150 - total flux cleaned = 0.0809361 Jy ! Component: 200 - total flux cleaned = 0.0919162 Jy ! Total flux subtracted in 200 components = 0.0919162 Jy ! Clean residual min=-0.016090 max=0.019518 Jy/beam ! Clean residual mean=0.000041 rms=0.006052 Jy/beam ! Combined flux in latest and established models = 0.659924 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0036683 Jy ! Component: 100 - total flux cleaned = 0.00644681 Jy ! Component: 150 - total flux cleaned = 0.00829707 Jy ! Component: 200 - total flux cleaned = 0.00941534 Jy ! Total flux subtracted in 200 components = 0.00941534 Jy ! Clean residual min=-0.016023 max=0.018230 Jy/beam ! Clean residual mean=0.000034 rms=0.005451 Jy/beam ! Combined flux in latest and established models = 0.66934 Jy ! Adding 84 model components to the UV plane model. ! The established model now contains 174 components and 0.66934 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.554 mas, bmaj=10.58 mas, bpa=0.3954 degrees ! Estimated noise=4.17688 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000888591 Jy ! Component: 100 - total flux cleaned = 0.000899166 Jy ! Component: 150 - total flux cleaned = 0.000701787 Jy ! Component: 200 - total flux cleaned = 0.000513292 Jy ! Total flux subtracted in 200 components = 0.000513292 Jy ! Clean residual min=-0.011430 max=0.012782 Jy/beam ! Clean residual mean=0.000000 rms=0.003210 Jy/beam ! Combined flux in latest and established models = 0.669853 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 199 components and 0.669853 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111567Jy sigma=0.189109 ! Fit after self-cal, rms=0.111135Jy sigma=0.188498 wmodel /g0/scr/pima/npcsb_uvs/J0300+8202_S_map.mod ! Writing 199 model components to file: /g0/scr/pima/npcsb_uvs/J0300+8202_S_map.mod wobs /g0/scr/pima/npcsb_uvs/J0300+8202_S_uvs.fits ! Writing UV FITS file: /g0/scr/pima/npcsb_uvs/J0300+8202_S_uvs.fits wwins /g0/scr/pima/npcsb_uvs/J0300+8202_S_map.win ! wwins: Wrote 3 windows to /g0/scr/pima/npcsb_uvs/J0300+8202_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00388837 Jy ! Component: 100 - total flux cleaned = 0.00625344 Jy ! Component: 150 - total flux cleaned = 0.00857072 Jy ! Component: 200 - total flux cleaned = 0.0100425 Jy ! Component: 250 - total flux cleaned = 0.0108099 Jy ! Component: 300 - total flux cleaned = 0.0108065 Jy ! Component: 350 - total flux cleaned = 0.0109407 Jy ! Component: 400 - total flux cleaned = 0.0109366 Jy ! Component: 450 - total flux cleaned = 0.0113079 Jy ! Component: 500 - total flux cleaned = 0.0117821 Jy ! Component: 550 - total flux cleaned = 0.0124682 Jy ! Component: 600 - total flux cleaned = 0.0129094 Jy ! Component: 650 - total flux cleaned = 0.0132258 Jy ! Component: 700 - total flux cleaned = 0.0137366 Jy ! Component: 750 - total flux cleaned = 0.0141342 Jy ! Component: 800 - total flux cleaned = 0.0145179 Jy ! Component: 850 - total flux cleaned = 0.0149807 Jy ! Component: 900 - total flux cleaned = 0.0151612 Jy ! Component: 950 - total flux cleaned = 0.0156843 Jy ! Component: 1000 - total flux cleaned = 0.0159383 Jy ! Component: 1050 - total flux cleaned = 0.0161854 Jy ! Component: 1100 - total flux cleaned = 0.0162649 Jy ! Component: 1150 - total flux cleaned = 0.0162658 Jy ! Component: 1200 - total flux cleaned = 0.0164167 Jy ! Component: 1250 - total flux cleaned = 0.0164191 Jy ! Component: 1300 - total flux cleaned = 0.016562 Jy ! Component: 1350 - total flux cleaned = 0.0164906 Jy ! Component: 1400 - total flux cleaned = 0.0163549 Jy ! Component: 1450 - total flux cleaned = 0.0164861 Jy ! Component: 1500 - total flux cleaned = 0.0162312 Jy ! Component: 1550 - total flux cleaned = 0.0163584 Jy ! Component: 1600 - total flux cleaned = 0.0163597 Jy ! Component: 1650 - total flux cleaned = 0.0166615 Jy ! Component: 1700 - total flux cleaned = 0.0167224 Jy ! Component: 1750 - total flux cleaned = 0.0169515 Jy ! Component: 1800 - total flux cleaned = 0.0168952 Jy ! Component: 1850 - total flux cleaned = 0.0171176 Jy ! Component: 1900 - total flux cleaned = 0.0173344 Jy ! Component: 1950 - total flux cleaned = 0.0171749 Jy ! Component: 2000 - total flux cleaned = 0.0173337 Jy ! Component: 2050 - total flux cleaned = 0.0174861 Jy ! Component: 2100 - total flux cleaned = 0.0176376 Jy ! Component: 2150 - total flux cleaned = 0.0178869 Jy ! Component: 2200 - total flux cleaned = 0.0181806 Jy ! Component: 2250 - total flux cleaned = 0.0182278 Jy ! Component: 2300 - total flux cleaned = 0.0184653 Jy ! Component: 2350 - total flux cleaned = 0.0185594 Jy ! Component: 2400 - total flux cleaned = 0.0190213 Jy ! Component: 2450 - total flux cleaned = 0.019066 Jy ! Component: 2500 - total flux cleaned = 0.0193343 Jy ! Component: 2550 - total flux cleaned = 0.019422 Jy ! Component: 2600 - total flux cleaned = 0.0195524 Jy ! Component: 2650 - total flux cleaned = 0.019595 Jy ! Component: 2700 - total flux cleaned = 0.0197223 Jy ! Component: 2750 - total flux cleaned = 0.0198479 Jy ! Component: 2800 - total flux cleaned = 0.0200131 Jy ! Component: 2850 - total flux cleaned = 0.0200544 Jy ! Component: 2900 - total flux cleaned = 0.0200956 Jy ! Component: 2950 - total flux cleaned = 0.0204556 Jy ! Component: 3000 - total flux cleaned = 0.0204551 Jy ! Component: 3050 - total flux cleaned = 0.0205329 Jy ! Component: 3100 - total flux cleaned = 0.0208037 Jy ! Component: 3150 - total flux cleaned = 0.020918 Jy ! Component: 3200 - total flux cleaned = 0.0209933 Jy ! Component: 3250 - total flux cleaned = 0.0209937 Jy ! Component: 3300 - total flux cleaned = 0.0211806 Jy ! Component: 3350 - total flux cleaned = 0.0215131 Jy ! Component: 3400 - total flux cleaned = 0.0216593 Jy ! Component: 3450 - total flux cleaned = 0.0218762 Jy ! Component: 3500 - total flux cleaned = 0.0219483 Jy ! Component: 3550 - total flux cleaned = 0.022127 Jy ! Component: 3600 - total flux cleaned = 0.0223043 Jy ! Component: 3650 - total flux cleaned = 0.0225147 Jy ! Component: 3700 - total flux cleaned = 0.0225844 Jy ! Component: 3750 - total flux cleaned = 0.0227917 Jy ! Component: 3800 - total flux cleaned = 0.0230658 Jy ! Component: 3850 - total flux cleaned = 0.0233723 Jy ! Component: 3900 - total flux cleaned = 0.0235079 Jy ! Component: 3950 - total flux cleaned = 0.0237433 Jy ! Component: 4000 - total flux cleaned = 0.0239439 Jy ! Component: 4050 - total flux cleaned = 0.0241765 Jy ! Total flux subtracted in 4096 components = 0.0243746 Jy ! Clean residual min=-0.001820 max=0.002294 Jy/beam ! Clean residual mean=-0.000002 rms=0.000645 Jy/beam ! Combined flux in latest and established models = 0.694228 Jy keep ! Adding 384 model components to the UV plane model. ! The established model now contains 583 components and 0.694227 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/g0/scr/pima/npcsb_uvs/J0300+8202_S\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.554 x 10.58 at 0.3954 degrees (North through East) ! Clean map min=-0.011335 max=0.28713 Jy/beam ! Writing clean map to FITS file: /g0/scr/pima/npcsb_uvs/J0300+8202_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.287128 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000636735 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.665281 0.665281 1.33056 2.66113 5.32225 10.6445 21.289 42.578 85.156 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0019 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.287 quit ! Quitting program ! Log file /g0/scr/pima/npcsb_uvs/J0300+8202_S_uvs.log closed on Wed Sep 25 00:08:44 2013