! Started logfile: /g0/scr/pima/npcsb_uvs/J0202+8115_X_uvs.log on Wed Sep 25 00:03:10 2013 obs /g0/scr/pima/npcsb_uvs/J0202+8115_X_uva.fits ! Reading UV FITS file: /g0/scr/pima/npcsb_uvs/J0202+8115_X_uva.fits ! AN table 1: 45 integrations on 21 of 21 possible baselines. ! Apparent sampling: 0.761905 visibilities/baseline/integration-bin. ! Found source: J0202+8115 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40993e+09 8e+06 1 8e+06 ! 02 2 8.47993e+09 8e+06 1 8e+06 ! 03 3 8.79493e+09 8e+06 1 8e+06 ! 04 4 8.89993e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 2880 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsb_uvs/J0202+8115_X] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 45 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 45 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 45 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 45 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.005065Jy sigma=2.436118 ! Fit after self-cal, rms=0.953093Jy sigma=2.305353 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.278 mas, bmaj=5.948 mas, bpa=46.07 degrees ! Estimated noise=9.78417 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.037005 Jy ! Component: 100 - total flux cleaned = 0.0451618 Jy ! Total flux subtracted in 100 components = 0.0451618 Jy ! Clean residual min=-0.003891 max=0.004476 Jy/beam ! Clean residual mean=-0.000009 rms=0.001264 Jy/beam ! Combined flux in latest and established models = 0.0451618 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.0451618 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069550Jy sigma=0.162265 ! Fit after self-cal, rms=0.068176Jy sigma=0.158575 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.525 mas, bmaj=6.18 mas, bpa=44.39 degrees ! Estimated noise=5.69724 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00574185 Jy ! Component: 100 - total flux cleaned = 0.00832747 Jy ! Component: 150 - total flux cleaned = 0.00994823 Jy ! Component: 200 - total flux cleaned = 0.0106049 Jy ! Total flux subtracted in 200 components = 0.0106049 Jy ! Clean residual min=-0.002979 max=0.002973 Jy/beam ! Clean residual mean=-0.000006 rms=0.000838 Jy/beam ! Combined flux in latest and established models = 0.0557667 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 21 components and 0.0557667 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067728Jy sigma=0.157363 ! Fit after self-cal, rms=0.067709Jy sigma=0.157282 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 FD 1.02 KP 0.89 LA 1.02 ! NL 1.00* OV 1.01 PT 1.07 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 1.05 KP 0.99 LA 0.88 ! NL 1.00* OV 1.01 PT 1.10 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.91 KP 0.87 LA 0.92 ! NL 1.00* OV 1.03 PT 1.06 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 0.98 KP 1.00 LA 1.01 ! NL 1.00* OV 1.02 PT 0.99 ! ! ! Fit before self-cal, rms=0.067709Jy sigma=0.157282 ! Fit after self-cal, rms=0.065552Jy sigma=0.156812 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.521 mas, bmaj=6.153 mas, bpa=44.68 degrees ! Estimated noise=5.56043 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0013013 Jy ! Component: 100 - total flux cleaned = 0.00157661 Jy ! Component: 150 - total flux cleaned = 0.00167335 Jy ! Component: 200 - total flux cleaned = 0.00175448 Jy ! Total flux subtracted in 200 components = 0.00175448 Jy ! Clean residual min=-0.002420 max=0.002822 Jy/beam ! Clean residual mean=-0.000005 rms=0.000666 Jy/beam ! Combined flux in latest and established models = 0.0575212 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 51 components and 0.0575212 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065493Jy sigma=0.156718 ! Fit after self-cal, rms=0.065466Jy sigma=0.156476 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065466Jy sigma=0.156476 ! Fit after self-cal, rms=0.065017Jy sigma=0.156443 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.514 mas, bmaj=6.137 mas, bpa=44.85 degrees ! Estimated noise=5.51038 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00114288 Jy ! Component: 100 - total flux cleaned = 0.00112105 Jy ! Component: 150 - total flux cleaned = 0.00116186 Jy ! Component: 200 - total flux cleaned = 0.00121768 Jy ! Total flux subtracted in 200 components = 0.00121768 Jy ! Clean residual min=-0.002195 max=0.002807 Jy/beam ! Clean residual mean=-0.000005 rms=0.000619 Jy/beam ! Combined flux in latest and established models = 0.0587389 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 67 components and 0.0587389 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064978Jy sigma=0.156391 ! Fit after self-cal, rms=0.064944Jy sigma=0.156244 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-30.6, 42.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00243079 Jy ! Component: 100 - total flux cleaned = 0.00225855 Jy ! Component: 150 - total flux cleaned = 0.00208303 Jy ! Component: 200 - total flux cleaned = 0.00199152 Jy ! Total flux subtracted in 200 components = 0.00199152 Jy ! Clean residual min=-0.001716 max=0.001979 Jy/beam ! Clean residual mean=-0.000002 rms=0.000486 Jy/beam ! Combined flux in latest and established models = 0.0607304 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 94 components and 0.0607304 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064829Jy sigma=0.155995 ! Fit after self-cal, rms=0.064813Jy sigma=0.155902 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064813Jy sigma=0.155902 ! Fit after self-cal, rms=0.063981Jy sigma=0.155868 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.512 mas, bmaj=6.122 mas, bpa=45 degrees ! Estimated noise=5.43323 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00149706 Jy ! Component: 100 - total flux cleaned = 0.00124216 Jy ! Component: 150 - total flux cleaned = 0.0010536 Jy ! Component: 200 - total flux cleaned = 0.000981253 Jy ! Total flux subtracted in 200 components = 0.000981253 Jy ! Clean residual min=-0.001514 max=0.001996 Jy/beam ! Clean residual mean=-0.000001 rms=0.000441 Jy/beam ! Combined flux in latest and established models = 0.0617116 Jy selfcal ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 123 components and 0.0617116 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063928Jy sigma=0.155759 ! Fit after self-cal, rms=0.063929Jy sigma=0.155710 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000334582 Jy ! Component: 100 - total flux cleaned = 0.000134219 Jy ! Component: 150 - total flux cleaned = 0.00015738 Jy ! Component: 200 - total flux cleaned = 9.24205e-05 Jy ! Total flux subtracted in 200 components = 9.24205e-05 Jy ! Clean residual min=-0.001434 max=0.001930 Jy/beam ! Clean residual mean=-0.000001 rms=0.000431 Jy/beam ! Combined flux in latest and established models = 0.061804 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 137 components and 0.0618041 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063901Jy sigma=0.155658 ! Fit after self-cal, rms=0.063894Jy sigma=0.155646 ! Inverting map ! Added new window around map position (-39.4, -37.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00100943 Jy ! Component: 100 - total flux cleaned = 0.000932107 Jy ! Component: 150 - total flux cleaned = 0.000774769 Jy ! Component: 200 - total flux cleaned = 0.000669681 Jy ! Total flux subtracted in 200 components = 0.000669681 Jy ! Clean residual min=-0.001644 max=0.001505 Jy/beam ! Clean residual mean=-0.000002 rms=0.000377 Jy/beam ! Combined flux in latest and established models = 0.0624737 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 171 components and 0.0624737 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063804Jy sigma=0.155500 ! Fit after self-cal, rms=0.063788Jy sigma=0.155461 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063788Jy sigma=0.155461 ! Fit after self-cal, rms=0.063083Jy sigma=0.155440 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.828 mas, bmaj=6.184 mas, bpa=42.91 degrees ! Estimated noise=5.45098 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000344183 Jy ! Component: 100 - total flux cleaned = 0.000387293 Jy ! Component: 150 - total flux cleaned = 0.000447031 Jy ! Component: 200 - total flux cleaned = 0.000558492 Jy ! Total flux subtracted in 200 components = 0.000558492 Jy ! Clean residual min=-0.001513 max=0.001602 Jy/beam ! Clean residual mean=-0.000002 rms=0.000348 Jy/beam ! Combined flux in latest and established models = 0.0630322 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 194 components and 0.0630322 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063032Jy sigma=0.155360 ! Fit after self-cal, rms=0.063040Jy sigma=0.155340 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (33.8, -45.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000817974 Jy ! Component: 100 - total flux cleaned = 0.000978295 Jy ! Component: 150 - total flux cleaned = 0.00118182 Jy ! Component: 200 - total flux cleaned = 0.00136524 Jy ! Total flux subtracted in 200 components = 0.00136524 Jy ! Clean residual min=-0.001359 max=0.001099 Jy/beam ! Clean residual mean=0.000001 rms=0.000270 Jy/beam ! Combined flux in latest and established models = 0.0643974 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 230 components and 0.0643974 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062986Jy sigma=0.155225 ! Fit after self-cal, rms=0.062981Jy sigma=0.155200 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.51 mas, bmaj=6.122 mas, bpa=45.14 degrees ! Estimated noise=5.37103 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.51 x 6.122 at 45.14 degrees (North through East) ! Clean map min=-0.0021428 max=0.050576 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.261 mas, bmaj=5.919 mas, bpa=46.74 degrees ! Estimated noise=9.30433 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0360054 Jy ! Component: 100 - total flux cleaned = 0.0419546 Jy ! Component: 150 - total flux cleaned = 0.0433461 Jy ! Component: 200 - total flux cleaned = 0.045805 Jy ! Total flux subtracted in 200 components = 0.045805 Jy ! Clean residual min=-0.004840 max=0.004491 Jy/beam ! Clean residual mean=-0.000011 rms=0.001483 Jy/beam ! Combined flux in latest and established models = 0.045805 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 27 model components to the UV plane model. ! The established model now contains 27 components and 0.045805 Jy ! Inverting map and beam ! Estimated beam: bmin=2.51 mas, bmaj=6.122 mas, bpa=45.14 degrees ! Estimated noise=5.37103 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00281742 Jy ! Component: 100 - total flux cleaned = 0.00348704 Jy ! Component: 150 - total flux cleaned = 0.0043557 Jy ! Component: 200 - total flux cleaned = 0.00484217 Jy ! Total flux subtracted in 200 components = 0.00484217 Jy ! Clean residual min=-0.002299 max=0.001949 Jy/beam ! Clean residual mean=-0.000003 rms=0.000648 Jy/beam ! Combined flux in latest and established models = 0.0506472 Jy ! Adding 45 model components to the UV plane model. ! The established model now contains 71 components and 0.0506472 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.828 mas, bmaj=6.184 mas, bpa=42.91 degrees ! Estimated noise=5.45098 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000382448 Jy ! Component: 100 - total flux cleaned = -0.000194782 Jy ! Component: 150 - total flux cleaned = 0.000129293 Jy ! Component: 200 - total flux cleaned = 0.000375433 Jy ! Total flux subtracted in 200 components = 0.000375433 Jy ! Clean residual min=-0.001713 max=0.001541 Jy/beam ! Clean residual mean=-0.000001 rms=0.000490 Jy/beam ! Combined flux in latest and established models = 0.0510226 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0001743 Jy ! Component: 100 - total flux cleaned = 5.11791e-05 Jy ! Component: 150 - total flux cleaned = 8.31621e-05 Jy ! Component: 200 - total flux cleaned = 0.000117282 Jy ! Total flux subtracted in 200 components = 0.000117282 Jy ! Clean residual min=-0.001695 max=0.001401 Jy/beam ! Clean residual mean=0.000001 rms=0.000404 Jy/beam ! Combined flux in latest and established models = 0.0511399 Jy ! Adding 84 model components to the UV plane model. ! The established model now contains 140 components and 0.0511399 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.51 mas, bmaj=6.122 mas, bpa=45.14 degrees ! Estimated noise=5.37103 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000253156 Jy ! Component: 100 - total flux cleaned = -0.000516964 Jy ! Component: 150 - total flux cleaned = -0.000881194 Jy ! Component: 200 - total flux cleaned = -0.00108222 Jy ! Total flux subtracted in 200 components = -0.00108222 Jy ! Clean residual min=-0.001735 max=0.001345 Jy/beam ! Clean residual mean=0.000001 rms=0.000361 Jy/beam ! Combined flux in latest and established models = 0.0500577 Jy selfcal ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 177 components and 0.0500577 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062974Jy sigma=0.155197 ! Fit after self-cal, rms=0.062945Jy sigma=0.155126 wmodel /g0/scr/pima/npcsb_uvs/J0202+8115_X_map.mod ! Writing 177 model components to file: /g0/scr/pima/npcsb_uvs/J0202+8115_X_map.mod wobs /g0/scr/pima/npcsb_uvs/J0202+8115_X_uvs.fits ! Writing UV FITS file: /g0/scr/pima/npcsb_uvs/J0202+8115_X_uvs.fits wwins /g0/scr/pima/npcsb_uvs/J0202+8115_X_map.win ! wwins: Wrote 4 windows to /g0/scr/pima/npcsb_uvs/J0202+8115_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000501528 Jy ! Component: 100 - total flux cleaned = -0.000360981 Jy ! Component: 150 - total flux cleaned = -0.00032406 Jy ! Component: 200 - total flux cleaned = -0.000235656 Jy ! Component: 250 - total flux cleaned = -0.000150839 Jy ! Component: 300 - total flux cleaned = -5.28003e-05 Jy ! Component: 350 - total flux cleaned = -4.91302e-06 Jy ! Component: 400 - total flux cleaned = 7.21141e-05 Jy ! Component: 450 - total flux cleaned = 0.000161609 Jy ! Component: 500 - total flux cleaned = 0.00020503 Jy ! Component: 550 - total flux cleaned = 0.00028983 Jy ! Component: 600 - total flux cleaned = 0.000317365 Jy ! Component: 650 - total flux cleaned = 0.000303813 Jy ! Component: 700 - total flux cleaned = 0.000330402 Jy ! Component: 750 - total flux cleaned = 0.000317397 Jy ! Component: 800 - total flux cleaned = 0.000317634 Jy ! Component: 850 - total flux cleaned = 0.000342796 Jy ! Component: 900 - total flux cleaned = 0.000355012 Jy ! Component: 950 - total flux cleaned = 0.000342888 Jy ! Component: 1000 - total flux cleaned = 0.000355038 Jy ! Component: 1050 - total flux cleaned = 0.000366902 Jy ! Component: 1100 - total flux cleaned = 0.000366954 Jy ! Component: 1150 - total flux cleaned = 0.000378626 Jy ! Component: 1200 - total flux cleaned = 0.00039012 Jy ! Component: 1250 - total flux cleaned = 0.000401451 Jy ! Component: 1300 - total flux cleaned = 0.000401613 Jy ! Component: 1350 - total flux cleaned = 0.00041288 Jy ! Component: 1400 - total flux cleaned = 0.000391003 Jy ! Component: 1450 - total flux cleaned = 0.000380087 Jy ! Component: 1500 - total flux cleaned = 0.000369318 Jy ! Component: 1550 - total flux cleaned = 0.000337119 Jy ! Component: 1600 - total flux cleaned = 0.000337048 Jy ! Component: 1650 - total flux cleaned = 0.000305341 Jy ! Component: 1700 - total flux cleaned = 0.000284378 Jy ! Component: 1750 - total flux cleaned = 0.000273975 Jy ! Component: 1800 - total flux cleaned = 0.000211626 Jy ! Component: 1850 - total flux cleaned = 0.000190982 Jy ! Component: 1900 - total flux cleaned = 0.000160101 Jy ! Component: 1950 - total flux cleaned = 0.000119197 Jy ! Component: 2000 - total flux cleaned = 7.85595e-05 Jy ! Component: 2050 - total flux cleaned = 3.80781e-05 Jy ! Component: 2100 - total flux cleaned = -1.2224e-05 Jy ! Component: 2150 - total flux cleaned = -4.22695e-05 Jy ! Component: 2200 - total flux cleaned = -7.21689e-05 Jy ! Component: 2250 - total flux cleaned = -7.21354e-05 Jy ! Component: 2300 - total flux cleaned = -9.19099e-05 Jy ! Component: 2350 - total flux cleaned = -0.000101759 Jy ! Component: 2400 - total flux cleaned = -0.00012147 Jy ! Component: 2450 - total flux cleaned = -0.000121532 Jy ! Component: 2500 - total flux cleaned = -0.000121476 Jy ! Component: 2550 - total flux cleaned = -0.000131269 Jy ! Component: 2600 - total flux cleaned = -0.000131278 Jy ! Component: 2650 - total flux cleaned = -0.000141073 Jy ! Component: 2700 - total flux cleaned = -0.00017034 Jy ! Component: 2750 - total flux cleaned = -0.000170363 Jy ! Component: 2800 - total flux cleaned = -0.000160631 Jy ! Component: 2850 - total flux cleaned = -0.000170363 Jy ! Component: 2900 - total flux cleaned = -0.000150951 Jy ! Component: 2950 - total flux cleaned = -0.000121805 Jy ! Component: 3000 - total flux cleaned = -0.000112088 Jy ! Component: 3050 - total flux cleaned = -9.26552e-05 Jy ! Component: 3100 - total flux cleaned = -7.32139e-05 Jy ! Component: 3150 - total flux cleaned = -5.37558e-05 Jy ! Component: 3200 - total flux cleaned = -2.45398e-05 Jy ! Component: 3250 - total flux cleaned = -2.45584e-05 Jy ! Component: 3300 - total flux cleaned = 4.6775e-06 Jy ! Component: 3350 - total flux cleaned = -1.48071e-05 Jy ! Component: 3400 - total flux cleaned = -3.43759e-05 Jy ! Component: 3450 - total flux cleaned = -4.40939e-05 Jy ! Component: 3500 - total flux cleaned = -5.39207e-05 Jy ! Component: 3550 - total flux cleaned = -6.37483e-05 Jy ! Component: 3600 - total flux cleaned = -6.37122e-05 Jy ! Component: 3650 - total flux cleaned = -4.39714e-05 Jy ! Component: 3700 - total flux cleaned = -5.37913e-05 Jy ! Component: 3750 - total flux cleaned = -4.3847e-05 Jy ! Component: 3800 - total flux cleaned = -5.38235e-05 Jy ! Component: 3850 - total flux cleaned = -4.3877e-05 Jy ! Component: 3900 - total flux cleaned = -2.38631e-05 Jy ! Component: 3950 - total flux cleaned = -4.3941e-05 Jy ! Component: 4000 - total flux cleaned = -3.6194e-06 Jy ! Component: 4050 - total flux cleaned = -3.52558e-06 Jy ! Total flux subtracted in 4096 components = -3.47451e-06 Jy ! Clean residual min=-0.000625 max=0.000588 Jy/beam ! Clean residual mean=0.000001 rms=0.000180 Jy/beam ! Combined flux in latest and established models = 0.0500542 Jy keep ! Adding 213 model components to the UV plane model. ! The established model now contains 390 components and 0.0500542 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/g0/scr/pima/npcsb_uvs/J0202+8115_X\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.51 x 6.122 at 45.14 degrees (North through East) ! Clean map min=-0.0035114 max=0.047396 Jy/beam ! Writing clean map to FITS file: /g0/scr/pima/npcsb_uvs/J0202+8115_X_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.047396 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00018773 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.18826 1.18826 2.37652 4.75305 9.5061 19.0122 38.0244 76.0488 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.047 quit ! Quitting program ! Log file /g0/scr/pima/npcsb_uvs/J0202+8115_X_uvs.log closed on Wed Sep 25 00:03:15 2013