! Started logfile: /g0/scr/pima/npcsb_uvs/J0136+4751_S_uvs.log on Wed Sep 25 00:08:10 2013
obs /g0/scr/pima/npcsb_uvs/J0136+4751_S_uva.fits
! Reading UV FITS file: /g0/scr/pima/npcsb_uvs/J0136+4751_S_uva.fits
! AN table 1: 14 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.831349 visibilities/baseline/integration-bin.
! Found source: J0136+4751
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23693e+09        8e+06          1        8e+06
!  02        2  2.26693e+09        8e+06          1        8e+06
!  03        3  2.35693e+09        8e+06          1        8e+06
!  04        4  2.37693e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 1676 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsb_uvs/J0136+4751_S]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 16 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 16 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 16 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 16 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.936732Jy  sigma=3.957762
! Fit after  self-cal, rms=0.696560Jy  sigma=1.246472
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.793 mas, bmaj=9.418 mas, bpa=26.34 degrees
! Estimated noise=10.9199 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.01551 Jy
! Component: 100  -  total flux cleaned = 1.33556 Jy
! Total flux subtracted in 100 components = 1.33556 Jy
! Clean residual min=-0.091099 max=0.145133 Jy/beam
! Clean residual mean=-0.000712 rms=0.028234 Jy/beam
! Combined flux in latest and established models = 1.33556 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 1.33556 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.511489Jy  sigma=0.829737
! Fit after  self-cal, rms=0.511408Jy  sigma=0.829560
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.81 mas, bmaj=9.832 mas, bpa=29.14 degrees
! Estimated noise=8.29963 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.203316 Jy
! Component: 100  -  total flux cleaned = 0.297707 Jy
! Component: 150  -  total flux cleaned = 0.337388 Jy
! Component: 200  -  total flux cleaned = 0.34947 Jy
! Total flux subtracted in 200 components = 0.34947 Jy
! Clean residual min=-0.069438 max=0.134837 Jy/beam
! Clean residual mean=-0.000528 rms=0.022068 Jy/beam
! Combined flux in latest and established models = 1.68503 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 37 components and 1.68503 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.403378Jy  sigma=0.648702
! Fit after  self-cal, rms=0.403213Jy  sigma=0.648299
! Inverting map 
! Added new window around map position (12.5, -89.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0864968 Jy
! Component: 100  -  total flux cleaned = 0.107322 Jy
! Component: 150  -  total flux cleaned = 0.121758 Jy
! Component: 200  -  total flux cleaned = 0.133373 Jy
! Total flux subtracted in 200 components = 0.133373 Jy
! Clean residual min=-0.050923 max=0.085240 Jy/beam
! Clean residual mean=-0.000133 rms=0.014714 Jy/beam
! Combined flux in latest and established models = 1.81841 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 67 components and 1.81841 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.351118Jy  sigma=0.551030
! Fit after  self-cal, rms=0.348460Jy  sigma=0.541767
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        1.00     HN        0.95     KP        0.95     
!   LA        1.07     MK        0.92     NL        1.12     OV        1.00     
!   PT        1.05     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.09     FD        1.02     HN        0.98     KP        0.98     
!   LA        1.03     MK        0.97     NL        1.16     OV        1.01     
!   PT        1.00     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.61     FD        1.07     HN        0.96     KP        0.98     
!   LA        0.85     MK        1.04     NL        1.26     OV        1.03     
!   PT        1.08     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.19     FD        1.07     HN        0.92     KP        0.91     
!   LA        0.74     MK        1.02     NL        1.14     OV        0.88     
!   PT        0.95     
! 
! 
! Fit before self-cal, rms=0.348460Jy  sigma=0.541767
! Fit after  self-cal, rms=0.129548Jy  sigma=0.261931
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.79 mas, bmaj=9.793 mas, bpa=29.14 degrees
! Estimated noise=8.35302 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.48674e-05 Jy
! Component: 100  -  total flux cleaned = -0.00154371 Jy
! Component: 150  -  total flux cleaned = -0.00222875 Jy
! Component: 200  -  total flux cleaned = -0.00225759 Jy
! Total flux subtracted in 200 components = -0.00225759 Jy
! Clean residual min=-0.022523 max=0.026703 Jy/beam
! Clean residual mean=-0.000051 rms=0.005399 Jy/beam
! Combined flux in latest and established models = 1.81615 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 88 components and 1.81615 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.120108Jy  sigma=0.242855
! Fit after  self-cal, rms=0.119650Jy  sigma=0.242221
! Inverting map 
! Added new window around map position (-73, -59).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0129136 Jy
! Component: 100  -  total flux cleaned = 0.00979343 Jy
! Component: 150  -  total flux cleaned = 0.00714315 Jy
! Component: 200  -  total flux cleaned = 0.00440581 Jy
! Total flux subtracted in 200 components = 0.00440581 Jy
! Clean residual min=-0.020597 max=0.015866 Jy/beam
! Clean residual mean=-0.000062 rms=0.004531 Jy/beam
! Combined flux in latest and established models = 1.82056 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 112 components and 1.82056 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.113688Jy  sigma=0.231231
! Fit after  self-cal, rms=0.113503Jy  sigma=0.230951
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.113503Jy  sigma=0.230951
! Fit after  self-cal, rms=0.111814Jy  sigma=0.228066
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.79 mas, bmaj=9.774 mas, bpa=29.29 degrees
! Estimated noise=8.33894 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00128629 Jy
! Component: 100  -  total flux cleaned = -0.00173188 Jy
! Component: 150  -  total flux cleaned = -0.00133364 Jy
! Component: 200  -  total flux cleaned = -0.00165304 Jy
! Total flux subtracted in 200 components = -0.00165304 Jy
! Clean residual min=-0.018323 max=0.013894 Jy/beam
! Clean residual mean=-0.000046 rms=0.003853 Jy/beam
! Combined flux in latest and established models = 1.8189 Jy
selfcal
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 137 components and 1.8189 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.108844Jy  sigma=0.222338
! Fit after  self-cal, rms=0.108744Jy  sigma=0.222230
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000556922 Jy
! Component: 100  -  total flux cleaned = -0.000820479 Jy
! Component: 150  -  total flux cleaned = -0.00081729 Jy
! Component: 200  -  total flux cleaned = -0.000819126 Jy
! Total flux subtracted in 200 components = -0.000819126 Jy
! Clean residual min=-0.017301 max=0.013417 Jy/beam
! Clean residual mean=-0.000042 rms=0.003685 Jy/beam
! Combined flux in latest and established models = 1.81808 Jy
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 155 components and 1.81808 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.107545Jy  sigma=0.220059
! Fit after  self-cal, rms=0.107504Jy  sigma=0.220004
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.107504Jy  sigma=0.220004
! Fit after  self-cal, rms=0.106865Jy  sigma=0.218471
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.795 mas, bmaj=9.758 mas, bpa=29.4 degrees
! Estimated noise=8.34334 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00152143 Jy
! Component: 100  -  total flux cleaned = -0.00154331 Jy
! Component: 150  -  total flux cleaned = -0.000733808 Jy
! Component: 200  -  total flux cleaned = -9.47807e-06 Jy
! Total flux subtracted in 200 components = -9.47807e-06 Jy
! Clean residual min=-0.016004 max=0.012122 Jy/beam
! Clean residual mean=-0.000044 rms=0.003299 Jy/beam
! Combined flux in latest and established models = 1.81807 Jy
selfcal
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 166 components and 1.81807 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.105182Jy  sigma=0.215330
! Fit after  self-cal, rms=0.105130Jy  sigma=0.215264
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000220358 Jy
! Component: 100  -  total flux cleaned = -0.00022671 Jy
! Component: 150  -  total flux cleaned = -3.35326e-05 Jy
! Component: 200  -  total flux cleaned = -3.83337e-05 Jy
! Total flux subtracted in 200 components = -3.83337e-05 Jy
! Clean residual min=-0.015133 max=0.011832 Jy/beam
! Clean residual mean=-0.000040 rms=0.003191 Jy/beam
! Combined flux in latest and established models = 1.81803 Jy
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 178 components and 1.81804 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.104397Jy  sigma=0.213925
! Fit after  self-cal, rms=0.104375Jy  sigma=0.213890
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.104375Jy  sigma=0.213890
! Fit after  self-cal, rms=0.104060Jy  sigma=0.212931
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.664 mas, bmaj=10.89 mas, bpa=35.85 degrees
! Estimated noise=9.20199 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00257614 Jy
! Component: 100  -  total flux cleaned = -0.00062223 Jy
! Component: 150  -  total flux cleaned = -0.000793405 Jy
! Component: 200  -  total flux cleaned = -0.00080914 Jy
! Total flux subtracted in 200 components = -0.00080914 Jy
! Clean residual min=-0.011205 max=0.010221 Jy/beam
! Clean residual mean=-0.000073 rms=0.002976 Jy/beam
! Combined flux in latest and established models = 1.81723 Jy
selfcal
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 199 components and 1.81723 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.103423Jy  sigma=0.211554
! Fit after  self-cal, rms=0.103374Jy  sigma=0.211464
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000290219 Jy
! Component: 100  -  total flux cleaned = 0.000424402 Jy
! Component: 150  -  total flux cleaned = 0.000547457 Jy
! Component: 200  -  total flux cleaned = 0.000329401 Jy
! Total flux subtracted in 200 components = 0.000329401 Jy
! Clean residual min=-0.010837 max=0.010018 Jy/beam
! Clean residual mean=-0.000069 rms=0.002872 Jy/beam
! Combined flux in latest and established models = 1.81756 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 214 components and 1.81756 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.103130Jy  sigma=0.210845
! Fit after  self-cal, rms=0.103098Jy  sigma=0.210813
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=4.801 mas, bmaj=9.744 mas, bpa=29.47 degrees
! Estimated noise=8.34624 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.801 x 9.744 at 29.47 degrees (North through East)
! Clean map  min=-0.015784  max=1.3874 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.103098Jy  sigma=0.210813
! Fit after  self-cal, rms=0.095021Jy  sigma=0.192444
! Inverting map and beam 
! Estimated beam: bmin=4.802 mas, bmaj=9.737 mas, bpa=29.51 degrees
! Estimated noise=8.34707 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.1163e-06 Jy
! Component: 100  -  total flux cleaned = 0.000458636 Jy
! Component: 150  -  total flux cleaned = 0.000649338 Jy
! Component: 200  -  total flux cleaned = 0.000995149 Jy
! Total flux subtracted in 200 components = 0.000995149 Jy
! Clean residual min=-0.012478 max=0.009570 Jy/beam
! Clean residual mean=-0.000032 rms=0.002617 Jy/beam
! Combined flux in latest and established models = 1.81855 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 225 components and 1.81855 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.094032Jy  sigma=0.190675
! Fit after  self-cal, rms=0.093997Jy  sigma=0.190638
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000476847 Jy
! Component: 100  -  total flux cleaned = 0.000626568 Jy
! Component: 150  -  total flux cleaned = 0.000914894 Jy
! Component: 200  -  total flux cleaned = 0.00118926 Jy
! Total flux subtracted in 200 components = 0.00118926 Jy
! Clean residual min=-0.011676 max=0.009646 Jy/beam
! Clean residual mean=-0.000032 rms=0.002554 Jy/beam
! Combined flux in latest and established models = 1.81974 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 234 components and 1.81974 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.093543Jy  sigma=0.189852
! Fit after  self-cal, rms=0.093537Jy  sigma=0.189834
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.093537Jy  sigma=0.189834
! Fit after  self-cal, rms=0.093425Jy  sigma=0.189314
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.781 mas, bmaj=9.297 mas, bpa=26.21 degrees
! Estimated noise=11.0087 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.02366 Jy
! Component: 100  -  total flux cleaned = 1.35208 Jy
! Component: 150  -  total flux cleaned = 1.51906 Jy
! Component: 200  -  total flux cleaned = 1.60996 Jy
! Total flux subtracted in 200 components = 1.60996 Jy
! Clean residual min=-0.028771 max=0.053372 Jy/beam
! Clean residual mean=-0.000305 rms=0.009168 Jy/beam
! Combined flux in latest and established models = 1.60996 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 19 model components to the UV plane model.
! The established model now contains 19 components and 1.60996 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.807 mas, bmaj=9.723 mas, bpa=29.55 degrees
! Estimated noise=8.35204 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-7.5, 0).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0747367 Jy
! Component: 100  -  total flux cleaned = 0.116574 Jy
! Component: 150  -  total flux cleaned = 0.143268 Jy
! Component: 200  -  total flux cleaned = 0.163454 Jy
! Total flux subtracted in 200 components = 0.163454 Jy
! Clean residual min=-0.014214 max=0.021956 Jy/beam
! Clean residual mean=-0.000227 rms=0.004510 Jy/beam
! Combined flux in latest and established models = 1.77342 Jy
! Adding 50 model components to the UV plane model.
! The established model now contains 66 components and 1.77342 Jy
! Inverting map 
! Added new window around map position (7.5, -2.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0169136 Jy
! Component: 100  -  total flux cleaned = 0.0236953 Jy
! Component: 150  -  total flux cleaned = 0.030402 Jy
! Component: 200  -  total flux cleaned = 0.0349561 Jy
! Total flux subtracted in 200 components = 0.0349561 Jy
! Clean residual min=-0.011641 max=0.011564 Jy/beam
! Clean residual mean=-0.000110 rms=0.003103 Jy/beam
! Combined flux in latest and established models = 1.80837 Jy
! Adding 36 model components to the UV plane model.
! The established model now contains 97 components and 1.80837 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.671 mas, bmaj=10.87 mas, bpa=36.18 degrees
! Estimated noise=9.20565 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0103173 Jy
! Component: 100  -  total flux cleaned = 0.0138371 Jy
! Component: 150  -  total flux cleaned = 0.0150459 Jy
! Component: 200  -  total flux cleaned = 0.0155771 Jy
! Total flux subtracted in 200 components = 0.0155771 Jy
! Clean residual min=-0.010090 max=0.009162 Jy/beam
! Clean residual mean=-0.000111 rms=0.002705 Jy/beam
! Combined flux in latest and established models = 1.82395 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000503982 Jy
! Component: 100  -  total flux cleaned = 0.00120781 Jy
! Component: 150  -  total flux cleaned = 0.00185948 Jy
! Component: 200  -  total flux cleaned = 0.0024728 Jy
! Total flux subtracted in 200 components = 0.0024728 Jy
! Clean residual min=-0.008509 max=0.008133 Jy/beam
! Clean residual mean=-0.000086 rms=0.002324 Jy/beam
! Combined flux in latest and established models = 1.82642 Jy
! Adding 97 model components to the UV plane model.
! The established model now contains 188 components and 1.82642 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=4.807 mas, bmaj=9.723 mas, bpa=29.55 degrees
! Estimated noise=8.35204 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00279993 Jy
! Component: 100  -  total flux cleaned = -0.00281694 Jy
! Component: 150  -  total flux cleaned = -0.00239007 Jy
! Component: 200  -  total flux cleaned = -0.00180069 Jy
! Total flux subtracted in 200 components = -0.00180069 Jy
! Clean residual min=-0.008300 max=0.008948 Jy/beam
! Clean residual mean=-0.000049 rms=0.002171 Jy/beam
! Combined flux in latest and established models = 1.82462 Jy
selfcal
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 220 components and 1.82462 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.091709Jy  sigma=0.186709
! Fit after  self-cal, rms=0.091394Jy  sigma=0.186269
wmodel /g0/scr/pima/npcsb_uvs/J0136+4751_S_map.mod
! Writing 220 model components to file: /g0/scr/pima/npcsb_uvs/J0136+4751_S_map.mod
wobs /g0/scr/pima/npcsb_uvs/J0136+4751_S_uvs.fits
! Writing UV FITS file: /g0/scr/pima/npcsb_uvs/J0136+4751_S_uvs.fits
wwins /g0/scr/pima/npcsb_uvs/J0136+4751_S_map.win
! wwins: Wrote 5 windows to /g0/scr/pima/npcsb_uvs/J0136+4751_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.00210869 Jy
! Component: 100  -  total flux cleaned = 0.00114994 Jy
! Component: 150  -  total flux cleaned = 0.000385048 Jy
! Component: 200  -  total flux cleaned = -0.00105977 Jy
! Component: 250  -  total flux cleaned = -0.00231602 Jy
! Component: 300  -  total flux cleaned = -0.00372897 Jy
! Component: 350  -  total flux cleaned = -0.0049757 Jy
! Component: 400  -  total flux cleaned = -0.00647325 Jy
! Component: 450  -  total flux cleaned = -0.0078211 Jy
! Component: 500  -  total flux cleaned = -0.00921156 Jy
! Component: 550  -  total flux cleaned = -0.0103742 Jy
! Component: 600  -  total flux cleaned = -0.0117564 Jy
! Component: 650  -  total flux cleaned = -0.0126776 Jy
! Component: 700  -  total flux cleaned = -0.0135736 Jy
! Component: 750  -  total flux cleaned = -0.0142865 Jy
! Component: 800  -  total flux cleaned = -0.0151339 Jy
! Component: 850  -  total flux cleaned = -0.0158836 Jy
! Component: 900  -  total flux cleaned = -0.0166838 Jy
! Component: 950  -  total flux cleaned = -0.0170381 Jy
! Component: 1000  -  total flux cleaned = -0.0175914 Jy
! Component: 1050  -  total flux cleaned = -0.0181322 Jy
! Component: 1100  -  total flux cleaned = -0.0187917 Jy
! Component: 1150  -  total flux cleaned = -0.0193722 Jy
! Component: 1200  -  total flux cleaned = -0.0196873 Jy
! Component: 1250  -  total flux cleaned = -0.0201206 Jy
! Component: 1300  -  total flux cleaned = -0.0204839 Jy
! Component: 1350  -  total flux cleaned = -0.020722 Jy
! Component: 1400  -  total flux cleaned = -0.0209563 Jy
! Component: 1450  -  total flux cleaned = -0.0211277 Jy
! Component: 1500  -  total flux cleaned = -0.0213525 Jy
! Component: 1550  -  total flux cleaned = -0.0214611 Jy
! Component: 1600  -  total flux cleaned = -0.0216253 Jy
! Component: 1650  -  total flux cleaned = -0.0217336 Jy
! Component: 1700  -  total flux cleaned = -0.0219444 Jy
! Component: 1750  -  total flux cleaned = -0.0219449 Jy
! Component: 1800  -  total flux cleaned = -0.0220986 Jy
! Component: 1850  -  total flux cleaned = -0.0221495 Jy
! Component: 1900  -  total flux cleaned = -0.0222979 Jy
! Component: 1950  -  total flux cleaned = -0.0222489 Jy
! Component: 2000  -  total flux cleaned = -0.0224424 Jy
! Component: 2050  -  total flux cleaned = -0.022347 Jy
! Component: 2100  -  total flux cleaned = -0.0224882 Jy
! Component: 2150  -  total flux cleaned = -0.0223497 Jy
! Component: 2200  -  total flux cleaned = -0.0225779 Jy
! Component: 2250  -  total flux cleaned = -0.0225328 Jy
! Component: 2300  -  total flux cleaned = -0.0224449 Jy
! Component: 2350  -  total flux cleaned = -0.0226638 Jy
! Component: 2400  -  total flux cleaned = -0.0226636 Jy
! Component: 2450  -  total flux cleaned = -0.0226634 Jy
! Component: 2500  -  total flux cleaned = -0.0225804 Jy
! Component: 2550  -  total flux cleaned = -0.0227891 Jy
! Component: 2600  -  total flux cleaned = -0.0229538 Jy
! Component: 2650  -  total flux cleaned = -0.0229946 Jy
! Component: 2700  -  total flux cleaned = -0.0231545 Jy
! Component: 2750  -  total flux cleaned = -0.0231939 Jy
! Component: 2800  -  total flux cleaned = -0.0233121 Jy
! Component: 2850  -  total flux cleaned = -0.0233127 Jy
! Component: 2900  -  total flux cleaned = -0.0236204 Jy
! Component: 2950  -  total flux cleaned = -0.0237724 Jy
! Component: 3000  -  total flux cleaned = -0.0238854 Jy
! Component: 3050  -  total flux cleaned = -0.0238484 Jy
! Component: 3100  -  total flux cleaned = -0.0239594 Jy
! Component: 3150  -  total flux cleaned = -0.0239598 Jy
! Component: 3200  -  total flux cleaned = -0.0239964 Jy
! Component: 3250  -  total flux cleaned = -0.024069 Jy
! Component: 3300  -  total flux cleaned = -0.0240691 Jy
! Component: 3350  -  total flux cleaned = -0.0240337 Jy
! Component: 3400  -  total flux cleaned = -0.0240338 Jy
! Component: 3450  -  total flux cleaned = -0.0240685 Jy
! Component: 3500  -  total flux cleaned = -0.0239649 Jy
! Component: 3550  -  total flux cleaned = -0.0241022 Jy
! Component: 3600  -  total flux cleaned = -0.0241021 Jy
! Component: 3650  -  total flux cleaned = -0.0240342 Jy
! Component: 3700  -  total flux cleaned = -0.0240338 Jy
! Component: 3750  -  total flux cleaned = -0.0240004 Jy
! Component: 3800  -  total flux cleaned = -0.0240007 Jy
! Component: 3850  -  total flux cleaned = -0.0240667 Jy
! Component: 3900  -  total flux cleaned = -0.0241321 Jy
! Component: 3950  -  total flux cleaned = -0.0241973 Jy
! Component: 4000  -  total flux cleaned = -0.0242947 Jy
! Component: 4050  -  total flux cleaned = -0.0243594 Jy
! Total flux subtracted in 4096 components = -0.0244232 Jy
! Clean residual min=-0.001819 max=0.001792 Jy/beam
! Clean residual mean=-0.000021 rms=0.000601 Jy/beam
! Combined flux in latest and established models = 1.8002 Jy
keep
! Adding 276 model components to the UV plane model.
! The established model now contains 496 components and 1.8002 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/g0/scr/pima/npcsb_uvs/J0136+4751_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.807 x 9.723 at 29.55 degrees (North through East)
! Clean map  min=-0.0085711  max=1.3838 Jy/beam
! Writing clean map to FITS file: /g0/scr/pima/npcsb_uvs/J0136+4751_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 1.38378 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000589154 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.127728 0.127728 0.255455 0.51091 1.02182 2.04364 4.08728 8.17457 16.3491 32.6983 65.3965
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0017 
print "peak=",int(1000*peak_flux)/1000
! peak= 1.383 
quit
! Quitting program
! Log file /g0/scr/pima/npcsb_uvs/J0136+4751_S_uvs.log closed on Wed Sep 25 00:08:15 2013