! Started logfile: /g0/scr/pima/npcsb_uvs/J0125+8424_S_uvs.log on Wed Sep 25 00:08:06 2013
obs /g0/scr/pima/npcsb_uvs/J0125+8424_S_uva.fits
! Reading UV FITS file: /g0/scr/pima/npcsb_uvs/J0125+8424_S_uva.fits
! AN table 1: 46 integrations on 6 of 6 possible baselines.
! Apparent sampling: 1 visibilities/baseline/integration-bin.
! Found source: J0125+8424
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23693e+09        8e+06          1        8e+06
!  02        2  2.26693e+09        8e+06          1        8e+06
!  03        3  2.35693e+09        8e+06          1        8e+06
!  04        4  2.37693e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 1104 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsb_uvs/J0125+8424_S]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=1.027399Jy  sigma=2.104608
! Fit after  self-cal, rms=0.942298Jy  sigma=1.920485
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=19.96 mas, bmaj=48.95 mas, bpa=-0.4852 degrees
! Estimated noise=44.7639 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0120727 Jy
! Component: 100  -  total flux cleaned = 0.00215387 Jy
! Total flux subtracted in 100 components = 0.00215387 Jy
! Clean residual min=-0.014393 max=0.015056 Jy/beam
! Clean residual mean=0.000269 rms=0.005737 Jy/beam
! Combined flux in latest and established models = 0.00215387 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 20 components and 0.00215387 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058688Jy  sigma=0.117660
! Fit after  self-cal, rms=0.057949Jy  sigma=0.115303
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=21.52 mas, bmaj=44.58 mas, bpa=1.39 degrees
! Estimated noise=10.7176 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00766286 Jy
! Component: 100  -  total flux cleaned = 0.00813989 Jy
! Component: 150  -  total flux cleaned = 0.00655486 Jy
! Component: 200  -  total flux cleaned = 0.00347209 Jy
! Total flux subtracted in 200 components = 0.00347209 Jy
! Clean residual min=-0.004515 max=0.004504 Jy/beam
! Clean residual mean=0.000092 rms=0.002329 Jy/beam
! Combined flux in latest and established models = 0.00562596 Jy
! Performing phase self-cal
! Adding 107 model components to the UV plane model.
! The established model now contains 126 components and 0.00562596 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.050137Jy  sigma=0.101455
! Fit after  self-cal, rms=0.050019Jy  sigma=0.101133
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.68     KP        0.75     LA        0.78     PT        1.32     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.77     KP        1.72     LA        1.61     PT        0.53     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.42     KP        1.38     LA        1.04     PT        0.82     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.34     KP        1.18     LA        0.88     PT        0.76     
! 
! 
! Fit before self-cal, rms=0.050019Jy  sigma=0.101133
! Fit after  self-cal, rms=0.038334Jy  sigma=0.094960
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=22.44 mas, bmaj=44.97 mas, bpa=0.9511 degrees
! Estimated noise=10.7029 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00138783 Jy
! Component: 100  -  total flux cleaned = -0.000119096 Jy
! Component: 150  -  total flux cleaned = 0.00150331 Jy
! Component: 200  -  total flux cleaned = 0.00252611 Jy
! Total flux subtracted in 200 components = 0.00252611 Jy
! Clean residual min=-0.001162 max=0.001139 Jy/beam
! Clean residual mean=0.000012 rms=0.000348 Jy/beam
! Combined flux in latest and established models = 0.00815207 Jy
! Performing phase self-cal
! Adding 46 model components to the UV plane model.
! The established model now contains 172 components and 0.00815207 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.037951Jy  sigma=0.094642
! Fit after  self-cal, rms=0.038180Jy  sigma=0.094262
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.038180Jy  sigma=0.094262
! Fit after  self-cal, rms=0.037541Jy  sigma=0.093692
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=22.33 mas, bmaj=44.73 mas, bpa=0.9255 degrees
! Estimated noise=10.4574 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000869617 Jy
! Component: 100  -  total flux cleaned = -0.00147584 Jy
! Component: 150  -  total flux cleaned = -0.00188699 Jy
! Component: 200  -  total flux cleaned = -0.00210688 Jy
! Total flux subtracted in 200 components = -0.00210688 Jy
! Clean residual min=-0.000627 max=0.000623 Jy/beam
! Clean residual mean=-0.000009 rms=0.000219 Jy/beam
! Combined flux in latest and established models = 0.00604518 Jy
selfcal
! Performing phase self-cal
! Adding 81 model components to the UV plane model.
! The established model now contains 251 components and 0.00604518 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.037373Jy  sigma=0.093597
! Fit after  self-cal, rms=0.037535Jy  sigma=0.093525
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000152932 Jy
! Component: 100  -  total flux cleaned = 0.000182782 Jy
! Component: 150  -  total flux cleaned = 0.000182633 Jy
! Component: 200  -  total flux cleaned = 7.86018e-05 Jy
! Total flux subtracted in 200 components = 7.86018e-05 Jy
! Clean residual min=-0.000438 max=0.000438 Jy/beam
! Clean residual mean=-0.000004 rms=0.000168 Jy/beam
! Combined flux in latest and established models = 0.00612379 Jy
! Performing phase self-cal
! Adding 88 model components to the UV plane model.
! The established model now contains 337 components and 0.00612378 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.037517Jy  sigma=0.093392
! Fit after  self-cal, rms=0.037540Jy  sigma=0.093382
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.037540Jy  sigma=0.093382
! Fit after  self-cal, rms=0.037705Jy  sigma=0.093260
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=22.36 mas, bmaj=44.6 mas, bpa=0.6339 degrees
! Estimated noise=10.4598 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00033741 Jy
! Component: 100  -  total flux cleaned = -0.00040279 Jy
! Component: 150  -  total flux cleaned = -0.000433286 Jy
! Component: 200  -  total flux cleaned = -0.000432307 Jy
! Total flux subtracted in 200 components = -0.000432307 Jy
! Clean residual min=-0.000554 max=0.000548 Jy/beam
! Clean residual mean=-0.000005 rms=0.000198 Jy/beam
! Combined flux in latest and established models = 0.00569148 Jy
selfcal
! Performing phase self-cal
! Adding 63 model components to the UV plane model.
! The established model now contains 395 components and 0.00569148 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.037591Jy  sigma=0.093225
! Fit after  self-cal, rms=0.037652Jy  sigma=0.093205
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000116832 Jy
! Component: 100  -  total flux cleaned = -0.000189612 Jy
! Component: 150  -  total flux cleaned = -0.000214678 Jy
! Component: 200  -  total flux cleaned = -0.000244159 Jy
! Total flux subtracted in 200 components = -0.000244159 Jy
! Clean residual min=-0.000480 max=0.000490 Jy/beam
! Clean residual mean=-0.000001 rms=0.000174 Jy/beam
! Combined flux in latest and established models = 0.00544732 Jy
! Performing phase self-cal
! Adding 63 model components to the UV plane model.
! The established model now contains 454 components and 0.00544732 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.037646Jy  sigma=0.093111
! Fit after  self-cal, rms=0.037647Jy  sigma=0.093099
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.037647Jy  sigma=0.093099
! Fit after  self-cal, rms=0.037791Jy  sigma=0.093018
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=22.62 mas, bmaj=44.51 mas, bpa=0.4984 degrees
! Estimated noise=10.4289 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000320739 Jy
! Component: 100  -  total flux cleaned = -0.000442545 Jy
! Component: 150  -  total flux cleaned = -0.000486024 Jy
! Component: 200  -  total flux cleaned = -0.000464747 Jy
! Total flux subtracted in 200 components = -0.000464747 Jy
! Clean residual min=-0.000337 max=0.000337 Jy/beam
! Clean residual mean=-0.000006 rms=0.000127 Jy/beam
! Combined flux in latest and established models = 0.00498257 Jy
selfcal
! Performing phase self-cal
! Adding 88 model components to the UV plane model.
! The established model now contains 534 components and 0.00498257 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.037718Jy  sigma=0.092966
! Fit after  self-cal, rms=0.037738Jy  sigma=0.092960
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.01965e-05 Jy
! Component: 100  -  total flux cleaned = 2.15022e-05 Jy
! Component: 150  -  total flux cleaned = 7.98704e-05 Jy
! Component: 200  -  total flux cleaned = 0.000101873 Jy
! Total flux subtracted in 200 components = 0.000101873 Jy
! Clean residual min=-0.000371 max=0.000374 Jy/beam
! Clean residual mean=-0.000000 rms=0.000130 Jy/beam
! Combined flux in latest and established models = 0.00508444 Jy
! Performing phase self-cal
! Adding 60 model components to the UV plane model.
! The established model now contains 576 components and 0.00508444 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.037719Jy  sigma=0.092916
! Fit after  self-cal, rms=0.037716Jy  sigma=0.092910
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=22.35 mas, bmaj=44.57 mas, bpa=0.5518 degrees
! Estimated noise=10.4549 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 22.35 x 44.57 at 0.5518 degrees (North through East)
! Clean map  min=-0.021023  max=0.040107 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=20.4 mas, bmaj=48.79 mas, bpa=-1.711 degrees
! Estimated noise=42.7579 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00273088 Jy
! Component: 100  -  total flux cleaned = -0.00619266 Jy
! Component: 150  -  total flux cleaned = -0.00619759 Jy
! Component: 200  -  total flux cleaned = -0.00633064 Jy
! Total flux subtracted in 200 components = -0.00633064 Jy
! Clean residual min=-0.021105 max=0.022201 Jy/beam
! Clean residual mean=0.000264 rms=0.006744 Jy/beam
! Combined flux in latest and established models = -0.00633065 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 23 model components to the UV plane model.
! The established model now contains 23 components and -0.00633065 Jy
! Inverting map and beam 
! Estimated beam: bmin=22.35 mas, bmaj=44.57 mas, bpa=0.5518 degrees
! Estimated noise=10.4549 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00470474 Jy
! Component: 100  -  total flux cleaned = 0.00713562 Jy
! Component: 150  -  total flux cleaned = 0.00761613 Jy
! Component: 200  -  total flux cleaned = 0.00761079 Jy
! Total flux subtracted in 200 components = 0.00761079 Jy
! Clean residual min=-0.008693 max=0.008844 Jy/beam
! Clean residual mean=-0.000027 rms=0.003249 Jy/beam
! Combined flux in latest and established models = 0.00128014 Jy
! Adding 48 model components to the UV plane model.
! The established model now contains 67 components and 0.00128014 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=22.62 mas, bmaj=44.51 mas, bpa=0.4984 degrees
! Estimated noise=10.4289 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0010229 Jy
! Component: 100  -  total flux cleaned = 0.00112537 Jy
! Component: 150  -  total flux cleaned = 0.000827242 Jy
! Component: 200  -  total flux cleaned = -0.000134629 Jy
! Total flux subtracted in 200 components = -0.000134629 Jy
! Clean residual min=-0.002764 max=0.002709 Jy/beam
! Clean residual mean=0.000023 rms=0.000954 Jy/beam
! Combined flux in latest and established models = 0.00114551 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.55484e-06 Jy
! Component: 100  -  total flux cleaned = 0.000420194 Jy
! Component: 150  -  total flux cleaned = 0.000888585 Jy
! Component: 200  -  total flux cleaned = 0.00143316 Jy
! Total flux subtracted in 200 components = 0.00143316 Jy
! Clean residual min=-0.005216 max=0.005261 Jy/beam
! Clean residual mean=0.000024 rms=0.001854 Jy/beam
! Combined flux in latest and established models = 0.00257867 Jy
! Adding 91 model components to the UV plane model.
! The established model now contains 154 components and 0.00257867 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=22.35 mas, bmaj=44.57 mas, bpa=0.5518 degrees
! Estimated noise=10.4549 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000536567 Jy
! Component: 100  -  total flux cleaned = 0.000520181 Jy
! Component: 150  -  total flux cleaned = 0.000520387 Jy
! Component: 200  -  total flux cleaned = 0.000511558 Jy
! Total flux subtracted in 200 components = 0.000511558 Jy
! Clean residual min=-0.003657 max=0.003620 Jy/beam
! Clean residual mean=-0.000020 rms=0.001329 Jy/beam
! Combined flux in latest and established models = 0.00309023 Jy
selfcal
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 187 components and 0.00309023 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.038351Jy  sigma=0.094783
! Fit after  self-cal, rms=0.038476Jy  sigma=0.094233
wmodel /g0/scr/pima/npcsb_uvs/J0125+8424_S_map.mod
! Writing 187 model components to file: /g0/scr/pima/npcsb_uvs/J0125+8424_S_map.mod
wobs /g0/scr/pima/npcsb_uvs/J0125+8424_S_uvs.fits
! Writing UV FITS file: /g0/scr/pima/npcsb_uvs/J0125+8424_S_uvs.fits
wwins /g0/scr/pima/npcsb_uvs/J0125+8424_S_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
![Exited script file: /home/lpetrov/bin/01_muppet]
! 
wmap "/g0/scr/pima/npcsb_uvs/J0125+8424_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 22.35 x 44.57 at 0.5518 degrees (North through East)
! Clean map  min=-0.036797  max=0.03828 Jy/beam
! Writing clean map to FITS file: /g0/scr/pima/npcsb_uvs/J0125+8424_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0382804 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000947111 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -7.42243 7.42243 14.8449 29.6897 59.3794
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0028 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.038 
quit
! Quitting program
! Log file /g0/scr/pima/npcsb_uvs/J0125+8424_S_uvs.log closed on Wed Sep 25 00:08:10 2013