! Started logfile: /g0/scr/pima/npcsb_uvs/J0117+8928_S_uvs.log on Wed Sep 25 00:08:01 2013 obs /g0/scr/pima/npcsb_uvs/J0117+8928_S_uva.fits ! Reading UV FITS file: /g0/scr/pima/npcsb_uvs/J0117+8928_S_uva.fits ! AN table 1: 46 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.6657 visibilities/baseline/integration-bin. ! Found source: J0117+8928 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23693e+09 8e+06 1 8e+06 ! 02 2 2.26693e+09 8e+06 1 8e+06 ! 03 3 2.35693e+09 8e+06 1 8e+06 ! 04 4 2.37693e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 5512 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsb_uvs/J0117+8928_S] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.002447Jy sigma=1.894393 ! Fit after self-cal, rms=0.895594Jy sigma=1.726057 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.659 mas, bmaj=8.94 mas, bpa=-1.529 degrees ! Estimated noise=11.0869 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0845868 Jy ! Component: 100 - total flux cleaned = 0.118287 Jy ! Total flux subtracted in 100 components = 0.118287 Jy ! Clean residual min=-0.027552 max=0.026585 Jy/beam ! Clean residual mean=0.000054 rms=0.007218 Jy/beam ! Combined flux in latest and established models = 0.118287 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 35 components and 0.118287 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.163375Jy sigma=0.276747 ! Fit after self-cal, rms=0.161892Jy sigma=0.274246 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.726 mas, bmaj=10.25 mas, bpa=-2.451 degrees ! Estimated noise=5.20015 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0215441 Jy ! Component: 100 - total flux cleaned = 0.0341542 Jy ! Component: 150 - total flux cleaned = 0.0422979 Jy ! Component: 200 - total flux cleaned = 0.0476908 Jy ! Total flux subtracted in 200 components = 0.0476908 Jy ! Clean residual min=-0.042506 max=0.049446 Jy/beam ! Clean residual mean=0.000028 rms=0.011581 Jy/beam ! Combined flux in latest and established models = 0.165978 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 66 components and 0.165978 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.157626Jy sigma=0.269996 ! Fit after self-cal, rms=0.157139Jy sigma=0.269657 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 FD 1.05 HN 0.91 KP 0.81 ! LA 0.65 MK 1.17 NL 1.56 OV 0.98 ! PT 0.50 SC 0.52 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.73 FD 1.39 HN 0.69 KP 1.63 ! LA 1.00 MK 0.68 NL 1.57 OV 0.50 ! PT 20091504640.00 SC 0.68 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.42 HN 0.72 KP 1.70 ! LA 0.94 MK 0.86 NL 1.31 OV 0.50 ! PT 23289374720.00 SC 0.78 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.68 FD 1.36 HN 0.64 KP 1.62 ! LA 0.80 MK 0.78 NL 1.34 OV 0.43 ! PT 19617779712.00 SC 0.87 ! ! ! Fit before self-cal, rms=0.157139Jy sigma=0.269657 ! Fit after self-cal, rms=0.181942Jy sigma=0.208760 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.638 mas, bmaj=10.35 mas, bpa=-0.8044 degrees ! Estimated noise=5.42289 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-16.5, -2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.036441 Jy ! Component: 100 - total flux cleaned = 0.0539879 Jy ! Component: 150 - total flux cleaned = 0.0673086 Jy ! Component: 200 - total flux cleaned = 0.0777951 Jy ! Total flux subtracted in 200 components = 0.0777951 Jy ! Clean residual min=-0.020865 max=0.015150 Jy/beam ! Clean residual mean=-0.000069 rms=0.005137 Jy/beam ! Combined flux in latest and established models = 0.243773 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 107 components and 0.243773 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.164372Jy sigma=0.184898 ! Fit after self-cal, rms=0.163488Jy sigma=0.179615 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.163488Jy sigma=0.179615 ! Fit after self-cal, rms=0.100522Jy sigma=0.168891 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.731 mas, bmaj=10.3 mas, bpa=-0.5273 degrees ! Estimated noise=5.10558 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0149034 Jy ! Component: 100 - total flux cleaned = 0.0181476 Jy ! Component: 150 - total flux cleaned = 0.0208048 Jy ! Component: 200 - total flux cleaned = 0.0229099 Jy ! Total flux subtracted in 200 components = 0.0229099 Jy ! Clean residual min=-0.015025 max=0.011202 Jy/beam ! Clean residual mean=-0.000021 rms=0.003704 Jy/beam ! Combined flux in latest and established models = 0.266683 Jy selfcal ! Performing phase self-cal ! Adding 49 model components to the UV plane model. ! The established model now contains 150 components and 0.266683 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097486Jy sigma=0.160700 ! Fit after self-cal, rms=0.096640Jy sigma=0.159541 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00481787 Jy ! Component: 100 - total flux cleaned = 0.00734886 Jy ! Component: 150 - total flux cleaned = 0.00979607 Jy ! Component: 200 - total flux cleaned = 0.0118285 Jy ! Total flux subtracted in 200 components = 0.0118285 Jy ! Clean residual min=-0.013699 max=0.009913 Jy/beam ! Clean residual mean=-0.000022 rms=0.003394 Jy/beam ! Combined flux in latest and established models = 0.278511 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 176 components and 0.278511 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095529Jy sigma=0.157294 ! Fit after self-cal, rms=0.095438Jy sigma=0.157108 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095438Jy sigma=0.157108 ! Fit after self-cal, rms=0.091984Jy sigma=0.155760 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.779 mas, bmaj=10.3 mas, bpa=-0.5123 degrees ! Estimated noise=5.03547 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00241547 Jy ! Component: 100 - total flux cleaned = 0.00294154 Jy ! Component: 150 - total flux cleaned = 0.00396623 Jy ! Component: 200 - total flux cleaned = 0.00489743 Jy ! Total flux subtracted in 200 components = 0.00489743 Jy ! Clean residual min=-0.011900 max=0.008948 Jy/beam ! Clean residual mean=-0.000002 rms=0.003157 Jy/beam ! Combined flux in latest and established models = 0.283409 Jy selfcal ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 191 components and 0.283409 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091615Jy sigma=0.154444 ! Fit after self-cal, rms=0.091559Jy sigma=0.154292 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00184734 Jy ! Component: 100 - total flux cleaned = 0.00243516 Jy ! Component: 150 - total flux cleaned = 0.00338771 Jy ! Component: 200 - total flux cleaned = 0.00406268 Jy ! Total flux subtracted in 200 components = 0.00406268 Jy ! Clean residual min=-0.011499 max=0.008755 Jy/beam ! Clean residual mean=-0.000003 rms=0.003068 Jy/beam ! Combined flux in latest and established models = 0.287471 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 205 components and 0.287471 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091370Jy sigma=0.153757 ! Fit after self-cal, rms=0.091351Jy sigma=0.153703 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091351Jy sigma=0.153703 ! Fit after self-cal, rms=0.090644Jy sigma=0.153521 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.318 mas, bmaj=12.64 mas, bpa=3.214 degrees ! Estimated noise=5.54933 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00247451 Jy ! Component: 100 - total flux cleaned = 0.00318849 Jy ! Component: 150 - total flux cleaned = 0.00387454 Jy ! Component: 200 - total flux cleaned = 0.00456963 Jy ! Total flux subtracted in 200 components = 0.00456963 Jy ! Clean residual min=-0.013893 max=0.011125 Jy/beam ! Clean residual mean=0.000005 rms=0.004064 Jy/beam ! Combined flux in latest and established models = 0.292041 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 218 components and 0.292041 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090568Jy sigma=0.153253 ! Fit after self-cal, rms=0.090508Jy sigma=0.153136 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000803312 Jy ! Component: 100 - total flux cleaned = 0.00130345 Jy ! Component: 150 - total flux cleaned = 0.00167648 Jy ! Component: 200 - total flux cleaned = 0.00194843 Jy ! Total flux subtracted in 200 components = 0.00194843 Jy ! Clean residual min=-0.013559 max=0.011452 Jy/beam ! Clean residual mean=0.000005 rms=0.004033 Jy/beam ! Combined flux in latest and established models = 0.293989 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 227 components and 0.293989 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090455Jy sigma=0.153054 ! Fit after self-cal, rms=0.090430Jy sigma=0.153008 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.786 mas, bmaj=10.29 mas, bpa=-0.2452 degrees ! Estimated noise=4.99078 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.786 x 10.29 at -0.2452 degrees (North through East) ! Clean map min=-0.010727 max=0.099836 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.762 mas, bmaj=9.423 mas, bpa=1.463 degrees ! Estimated noise=10.1304 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0766917 Jy ! Component: 100 - total flux cleaned = 0.113965 Jy ! Component: 150 - total flux cleaned = 0.14031 Jy ! Component: 200 - total flux cleaned = 0.161251 Jy ! Total flux subtracted in 200 components = 0.161251 Jy ! Clean residual min=-0.017505 max=0.019445 Jy/beam ! Clean residual mean=0.000041 rms=0.005051 Jy/beam ! Combined flux in latest and established models = 0.161251 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 54 model components to the UV plane model. ! The established model now contains 54 components and 0.161251 Jy ! Inverting map and beam ! Estimated beam: bmin=4.786 mas, bmaj=10.29 mas, bpa=-0.2452 degrees ! Estimated noise=4.99078 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0259618 Jy ! Component: 100 - total flux cleaned = 0.0449752 Jy ! Component: 150 - total flux cleaned = 0.0600823 Jy ! Component: 200 - total flux cleaned = 0.0726203 Jy ! Total flux subtracted in 200 components = 0.0726203 Jy ! Clean residual min=-0.019643 max=0.012476 Jy/beam ! Clean residual mean=0.000029 rms=0.004362 Jy/beam ! Combined flux in latest and established models = 0.233871 Jy ! Adding 58 model components to the UV plane model. ! The established model now contains 99 components and 0.233871 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.318 mas, bmaj=12.64 mas, bpa=3.214 degrees ! Estimated noise=5.54933 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0146621 Jy ! Component: 100 - total flux cleaned = 0.0246585 Jy ! Component: 150 - total flux cleaned = 0.0309618 Jy ! Component: 200 - total flux cleaned = 0.036213 Jy ! Total flux subtracted in 200 components = 0.036213 Jy ! Clean residual min=-0.019223 max=0.012324 Jy/beam ! Clean residual mean=0.000023 rms=0.004624 Jy/beam ! Combined flux in latest and established models = 0.270084 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00417277 Jy ! Component: 100 - total flux cleaned = 0.00791135 Jy ! Component: 150 - total flux cleaned = 0.0111312 Jy ! Component: 200 - total flux cleaned = 0.0136087 Jy ! Total flux subtracted in 200 components = 0.0136087 Jy ! Clean residual min=-0.016276 max=0.011235 Jy/beam ! Clean residual mean=0.000015 rms=0.004245 Jy/beam ! Combined flux in latest and established models = 0.283693 Jy ! Adding 65 model components to the UV plane model. ! The established model now contains 147 components and 0.283693 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.786 mas, bmaj=10.29 mas, bpa=-0.2452 degrees ! Estimated noise=4.99078 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00260472 Jy ! Component: 100 - total flux cleaned = 0.00369722 Jy ! Component: 150 - total flux cleaned = 0.0042615 Jy ! Component: 200 - total flux cleaned = 0.0046452 Jy ! Total flux subtracted in 200 components = 0.0046452 Jy ! Clean residual min=-0.012041 max=0.009583 Jy/beam ! Clean residual mean=0.000006 rms=0.003093 Jy/beam ! Combined flux in latest and established models = 0.288338 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 169 components and 0.288338 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091011Jy sigma=0.154231 ! Fit after self-cal, rms=0.090842Jy sigma=0.153998 wmodel /g0/scr/pima/npcsb_uvs/J0117+8928_S_map.mod ! Writing 169 model components to file: /g0/scr/pima/npcsb_uvs/J0117+8928_S_map.mod wobs /g0/scr/pima/npcsb_uvs/J0117+8928_S_uvs.fits ! Writing UV FITS file: /g0/scr/pima/npcsb_uvs/J0117+8928_S_uvs.fits wwins /g0/scr/pima/npcsb_uvs/J0117+8928_S_map.win ! wwins: Wrote 2 windows to /g0/scr/pima/npcsb_uvs/J0117+8928_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00517761 Jy ! Component: 100 - total flux cleaned = -0.00781665 Jy ! Component: 150 - total flux cleaned = -0.00872729 Jy ! Component: 200 - total flux cleaned = -0.00942145 Jy ! Component: 250 - total flux cleaned = -0.0100643 Jy ! Component: 300 - total flux cleaned = -0.0109009 Jy ! Component: 350 - total flux cleaned = -0.0116952 Jy ! Component: 400 - total flux cleaned = -0.012124 Jy ! Component: 450 - total flux cleaned = -0.0125324 Jy ! Component: 500 - total flux cleaned = -0.0130205 Jy ! Component: 550 - total flux cleaned = -0.0135795 Jy ! Component: 600 - total flux cleaned = -0.0139383 Jy ! Component: 650 - total flux cleaned = -0.0142003 Jy ! Component: 700 - total flux cleaned = -0.0142014 Jy ! Component: 750 - total flux cleaned = -0.0141231 Jy ! Component: 800 - total flux cleaned = -0.0142007 Jy ! Component: 850 - total flux cleaned = -0.0143479 Jy ! Component: 900 - total flux cleaned = -0.0142767 Jy ! Component: 950 - total flux cleaned = -0.0147623 Jy ! Component: 1000 - total flux cleaned = -0.0148963 Jy ! Component: 1050 - total flux cleaned = -0.0152253 Jy ! Component: 1100 - total flux cleaned = -0.0152262 Jy ! Component: 1150 - total flux cleaned = -0.0153514 Jy ! Component: 1200 - total flux cleaned = -0.0155934 Jy ! Component: 1250 - total flux cleaned = -0.015768 Jy ! Component: 1300 - total flux cleaned = -0.0158815 Jy ! Component: 1350 - total flux cleaned = -0.0160497 Jy ! Component: 1400 - total flux cleaned = -0.0161048 Jy ! Component: 1450 - total flux cleaned = -0.0163734 Jy ! Component: 1500 - total flux cleaned = -0.016583 Jy ! Component: 1550 - total flux cleaned = -0.0167878 Jy ! Component: 1600 - total flux cleaned = -0.0171403 Jy ! Component: 1650 - total flux cleaned = -0.0174862 Jy ! Component: 1700 - total flux cleaned = -0.0178748 Jy ! Component: 1750 - total flux cleaned = -0.0183029 Jy ! Component: 1800 - total flux cleaned = -0.0185368 Jy ! Component: 1850 - total flux cleaned = -0.0189515 Jy ! Component: 1900 - total flux cleaned = -0.0193584 Jy ! Component: 1950 - total flux cleaned = -0.0196687 Jy ! Component: 2000 - total flux cleaned = -0.0200186 Jy ! Component: 2050 - total flux cleaned = -0.0204478 Jy ! Component: 2100 - total flux cleaned = -0.0209134 Jy ! Component: 2150 - total flux cleaned = -0.0213299 Jy ! Component: 2200 - total flux cleaned = -0.0218227 Jy ! Component: 2250 - total flux cleaned = -0.0222675 Jy ! Component: 2300 - total flux cleaned = -0.0226661 Jy ! Component: 2350 - total flux cleaned = -0.0231776 Jy ! Component: 2400 - total flux cleaned = -0.0234876 Jy ! Component: 2450 - total flux cleaned = -0.0239088 Jy ! Component: 2500 - total flux cleaned = -0.024211 Jy ! Component: 2550 - total flux cleaned = -0.0245101 Jy ! Component: 2600 - total flux cleaned = -0.0249157 Jy ! Component: 2650 - total flux cleaned = -0.0251341 Jy ! Component: 2700 - total flux cleaned = -0.0253865 Jy ! Component: 2750 - total flux cleaned = -0.0256008 Jy ! Component: 2800 - total flux cleaned = -0.0259185 Jy ! Component: 2850 - total flux cleaned = -0.0261628 Jy ! Component: 2900 - total flux cleaned = -0.0263703 Jy ! Component: 2950 - total flux cleaned = -0.0267124 Jy ! Component: 3000 - total flux cleaned = -0.0269494 Jy ! Component: 3050 - total flux cleaned = -0.0272844 Jy ! Component: 3100 - total flux cleaned = -0.0275495 Jy ! Component: 3150 - total flux cleaned = -0.0276808 Jy ! Component: 3200 - total flux cleaned = -0.0279414 Jy ! Component: 3250 - total flux cleaned = -0.0281351 Jy ! Component: 3300 - total flux cleaned = -0.0283914 Jy ! Component: 3350 - total flux cleaned = -0.0286771 Jy ! Component: 3400 - total flux cleaned = -0.028992 Jy ! Component: 3450 - total flux cleaned = -0.0292109 Jy ! Component: 3500 - total flux cleaned = -0.0294592 Jy ! Component: 3550 - total flux cleaned = -0.0296751 Jy ! Component: 3600 - total flux cleaned = -0.030012 Jy ! Component: 3650 - total flux cleaned = -0.0302859 Jy ! Component: 3700 - total flux cleaned = -0.0305887 Jy ! Component: 3750 - total flux cleaned = -0.0308298 Jy ! Component: 3800 - total flux cleaned = -0.0311596 Jy ! Component: 3850 - total flux cleaned = -0.0314283 Jy ! Component: 3900 - total flux cleaned = -0.0316661 Jy ! Component: 3950 - total flux cleaned = -0.0320505 Jy ! Component: 4000 - total flux cleaned = -0.0322272 Jy ! Component: 4050 - total flux cleaned = -0.032579 Jy ! Total flux subtracted in 4096 components = -0.0328124 Jy ! Clean residual min=-0.001784 max=0.001668 Jy/beam ! Clean residual mean=-0.000008 rms=0.000576 Jy/beam ! Combined flux in latest and established models = 0.255526 Jy keep ! Adding 397 model components to the UV plane model. ! The established model now contains 566 components and 0.255526 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/g0/scr/pima/npcsb_uvs/J0117+8928_S\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.786 x 10.29 at -0.2452 degrees (North through East) ! Clean map min=-0.0058242 max=0.10286 Jy/beam ! Writing clean map to FITS file: /g0/scr/pima/npcsb_uvs/J0117+8928_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.102864 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000561427 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.63739 1.63739 3.27478 6.54956 13.0991 26.1983 52.3965 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0016 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.102 quit ! Quitting program ! Log file /g0/scr/pima/npcsb_uvs/J0117+8928_S_uvs.log closed on Wed Sep 25 00:08:05 2013