! Started logfile: /scr/pima/bp192a1_uvs/J2352-3316_X_uvs.log on Wed Sep 16 13:34:00 2015
obs /scr/pima/bp192a1_uvs/J2352-3316_X_uva.fits
! Reading UV FITS file: /scr/pima/bp192a1_uvs/J2352-3316_X_uva.fits
! AN table 1: 21 integrations on 21 of 21 possible baselines.
! Apparent sampling: 0.791383 visibilities/baseline/integration-bin.
! Found source: J2352-3316
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    7.392e+09      3.2e+07          1      3.2e+07
!  02        2    7.424e+09      3.2e+07          1      3.2e+07
!  03        3    7.456e+09      3.2e+07          1      3.2e+07
!  04        4    7.552e+09      3.2e+07          1      3.2e+07
!  05        5    7.744e+09      3.2e+07          1      3.2e+07
!  06        6    7.776e+09      3.2e+07          1      3.2e+07
!  07        7    7.808e+09      3.2e+07          1      3.2e+07
!  08        8     7.84e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 2792 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /scr/pima/bp192a1_uvs/J2352-3316_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.005922Jy  sigma=16.511995
! Fit after  self-cal, rms=0.940036Jy  sigma=15.423872
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.049 mas, bmaj=12.03 mas, bpa=8.898 degrees
! Estimated noise=0.980436 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0448741 Jy
! Component: 100  -  total flux cleaned = 0.0588508 Jy
! Total flux subtracted in 100 components = 0.0588508 Jy
! Clean residual min=-0.010634 max=0.010200 Jy/beam
! Clean residual mean=-0.000055 rms=0.003263 Jy/beam
! Combined flux in latest and established models = 0.0588508 Jy
! Performing phase self-cal
! Adding 40 model components to the UV plane model.
! The established model now contains 40 components and 0.0588508 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.057505Jy  sigma=0.821545
! Fit after  self-cal, rms=0.056322Jy  sigma=0.802677
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.429 mas, bmaj=12.41 mas, bpa=9.694 degrees
! Estimated noise=0.840523 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0112166 Jy
! Component: 100  -  total flux cleaned = 0.0160407 Jy
! Component: 150  -  total flux cleaned = 0.0197621 Jy
! Component: 200  -  total flux cleaned = 0.0220681 Jy
! Total flux subtracted in 200 components = 0.0220681 Jy
! Clean residual min=-0.009490 max=0.007414 Jy/beam
! Clean residual mean=-0.000019 rms=0.002928 Jy/beam
! Combined flux in latest and established models = 0.0809189 Jy
! Performing phase self-cal
! Adding 85 model components to the UV plane model.
! The established model now contains 120 components and 0.0809189 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.053100Jy  sigma=0.736934
! Fit after  self-cal, rms=0.053064Jy  sigma=0.734662
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.429 x 12.41 at 9.694 degrees (North through East)
! Clean map  min=-0.0092754  max=0.065243 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    KP        1.00*    LA        1.00*    
!   NL        1.00*    OV        1.00*    PT        1.00*    
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    KP        1.00*    LA        1.00*    
!   NL        1.00*    OV        1.00*    PT        1.00*    
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        0.87     KP        1.07     LA        1.04     
!   NL        1.19     OV        0.93     PT        0.94     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.87     KP        0.97     LA        1.00     
!   NL        1.09     OV        0.99     PT        0.88     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    KP        1.00*    LA        1.00*    
!   NL        1.00*    OV        1.00*    PT        1.00*    
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        0.90     KP        1.10     LA        1.04     
!   NL        1.17     OV        1.19     PT        0.91     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    KP        1.00*    LA        1.00*    
!   NL        1.00*    OV        1.00*    PT        1.00*    
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.18     FD        0.86     KP        1.11     LA        0.90     
!   NL        1.13     OV        1.13     PT        0.85     
! 
! 
! Fit before self-cal, rms=0.053064Jy  sigma=0.734662
! Fit after  self-cal, rms=0.052291Jy  sigma=0.725924
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.437 mas, bmaj=12.55 mas, bpa=9.878 degrees
! Estimated noise=0.82962 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.11611e-05 Jy
! Component: 100  -  total flux cleaned = 3.89776e-05 Jy
! Component: 150  -  total flux cleaned = -5.27919e-05 Jy
! Component: 200  -  total flux cleaned = 8.79299e-05 Jy
! Total flux subtracted in 200 components = 8.79299e-05 Jy
! Clean residual min=-0.008150 max=0.006721 Jy/beam
! Clean residual mean=-0.000015 rms=0.002456 Jy/beam
! Combined flux in latest and established models = 0.0810069 Jy
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 155 components and 0.0810069 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.051949Jy  sigma=0.719789
! Fit after  self-cal, rms=0.051991Jy  sigma=0.718937
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.051991Jy  sigma=0.718937
! Fit after  self-cal, rms=0.052173Jy  sigma=0.717655
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.433 mas, bmaj=12.52 mas, bpa=9.971 degrees
! Estimated noise=0.833896 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.31761e-05 Jy
! Component: 100  -  total flux cleaned = 0.000238504 Jy
! Component: 150  -  total flux cleaned = 0.000569373 Jy
! Component: 200  -  total flux cleaned = 0.000663026 Jy
! Total flux subtracted in 200 components = 0.000663026 Jy
! Clean residual min=-0.007937 max=0.006558 Jy/beam
! Clean residual mean=-0.000009 rms=0.002377 Jy/beam
! Combined flux in latest and established models = 0.0816699 Jy
selfcal
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 178 components and 0.0816699 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.052021Jy  sigma=0.715125
! Fit after  self-cal, rms=0.052049Jy  sigma=0.714641
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000218694 Jy
! Component: 100  -  total flux cleaned = -0.000272516 Jy
! Component: 150  -  total flux cleaned = -0.000273485 Jy
! Component: 200  -  total flux cleaned = -0.000273171 Jy
! Total flux subtracted in 200 components = -0.000273171 Jy
! Clean residual min=-0.007742 max=0.006657 Jy/beam
! Clean residual mean=-0.000003 rms=0.002323 Jy/beam
! Combined flux in latest and established models = 0.0813967 Jy
! Performing phase self-cal
! Adding 40 model components to the UV plane model.
! The established model now contains 212 components and 0.0813967 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.051966Jy  sigma=0.713235
! Fit after  self-cal, rms=0.051981Jy  sigma=0.712862
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.051981Jy  sigma=0.712862
! Fit after  self-cal, rms=0.052388Jy  sigma=0.712511
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.435 mas, bmaj=12.49 mas, bpa=9.918 degrees
! Estimated noise=0.844378 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.87252e-05 Jy
! Component: 100  -  total flux cleaned = -2.68632e-05 Jy
! Component: 150  -  total flux cleaned = 1.42215e-05 Jy
! Component: 200  -  total flux cleaned = -2.07991e-05 Jy
! Total flux subtracted in 200 components = -2.07991e-05 Jy
! Clean residual min=-0.007698 max=0.006784 Jy/beam
! Clean residual mean=-0.000000 rms=0.002312 Jy/beam
! Combined flux in latest and established models = 0.0813759 Jy
selfcal
! Performing phase self-cal
! Adding 38 model components to the UV plane model.
! The established model now contains 226 components and 0.0813759 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.052304Jy  sigma=0.711265
! Fit after  self-cal, rms=0.052311Jy  sigma=0.710962
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000295645 Jy
! Component: 100  -  total flux cleaned = -0.000444614 Jy
! Component: 150  -  total flux cleaned = -0.000444636 Jy
! Component: 200  -  total flux cleaned = -0.00050206 Jy
! Total flux subtracted in 200 components = -0.00050206 Jy
! Clean residual min=-0.007475 max=0.006789 Jy/beam
! Clean residual mean=0.000005 rms=0.002274 Jy/beam
! Combined flux in latest and established models = 0.0808739 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 242 components and 0.0808739 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.052256Jy  sigma=0.710109
! Fit after  self-cal, rms=0.052268Jy  sigma=0.709823
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.052268Jy  sigma=0.709823
! Fit after  self-cal, rms=0.052564Jy  sigma=0.709617
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.589 mas, bmaj=12.65 mas, bpa=9.777 degrees
! Estimated noise=0.849091 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000334762 Jy
! Component: 100  -  total flux cleaned = -0.00065764 Jy
! Component: 150  -  total flux cleaned = -0.000721119 Jy
! Component: 200  -  total flux cleaned = -0.000719976 Jy
! Total flux subtracted in 200 components = -0.000719976 Jy
! Clean residual min=-0.007793 max=0.007286 Jy/beam
! Clean residual mean=0.000007 rms=0.002451 Jy/beam
! Combined flux in latest and established models = 0.0801539 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 249 components and 0.0801539 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.052506Jy  sigma=0.708796
! Fit after  self-cal, rms=0.052514Jy  sigma=0.708526
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00032471 Jy
! Component: 100  -  total flux cleaned = -0.000447108 Jy
! Component: 150  -  total flux cleaned = -0.000634893 Jy
! Component: 200  -  total flux cleaned = -0.000710862 Jy
! Total flux subtracted in 200 components = -0.000710862 Jy
! Clean residual min=-0.007586 max=0.007228 Jy/beam
! Clean residual mean=0.000011 rms=0.002417 Jy/beam
! Combined flux in latest and established models = 0.079443 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 260 components and 0.079443 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.052472Jy  sigma=0.707929
! Fit after  self-cal, rms=0.052483Jy  sigma=0.707691
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.436 mas, bmaj=12.47 mas, bpa=9.852 degrees
! Estimated noise=0.852634 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.436 x 12.47 at 9.852 degrees (North through East)
! Clean map  min=-0.010096  max=0.065993 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.054 mas, bmaj=12.03 mas, bpa=9.049 degrees
! Estimated noise=0.998977 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0460487 Jy
! Component: 100  -  total flux cleaned = 0.0573636 Jy
! Component: 150  -  total flux cleaned = 0.0640306 Jy
! Component: 200  -  total flux cleaned = 0.0691678 Jy
! Total flux subtracted in 200 components = 0.0691678 Jy
! Clean residual min=-0.008450 max=0.006556 Jy/beam
! Clean residual mean=-0.000051 rms=0.002534 Jy/beam
! Combined flux in latest and established models = 0.0691677 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 61 model components to the UV plane model.
! The established model now contains 61 components and 0.0691677 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.436 mas, bmaj=12.47 mas, bpa=9.852 degrees
! Estimated noise=0.852634 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00593174 Jy
! Component: 100  -  total flux cleaned = 0.00925951 Jy
! Component: 150  -  total flux cleaned = 0.0102422 Jy
! Component: 200  -  total flux cleaned = 0.0112053 Jy
! Total flux subtracted in 200 components = 0.0112053 Jy
! Clean residual min=-0.008354 max=0.006985 Jy/beam
! Clean residual mean=-0.000035 rms=0.002610 Jy/beam
! Combined flux in latest and established models = 0.080373 Jy
! Adding 64 model components to the UV plane model.
! The established model now contains 121 components and 0.080373 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.589 mas, bmaj=12.65 mas, bpa=9.777 degrees
! Estimated noise=0.849091 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000476753 Jy
! Component: 100  -  total flux cleaned = 0.00109216 Jy
! Component: 150  -  total flux cleaned = 0.00152572 Jy
! Component: 200  -  total flux cleaned = 0.00167862 Jy
! Total flux subtracted in 200 components = 0.00167862 Jy
! Clean residual min=-0.008279 max=0.007685 Jy/beam
! Clean residual mean=-0.000019 rms=0.002629 Jy/beam
! Combined flux in latest and established models = 0.0820516 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.26371e-05 Jy
! Component: 100  -  total flux cleaned = -4.90101e-05 Jy
! Component: 150  -  total flux cleaned = -0.000104347 Jy
! Component: 200  -  total flux cleaned = -0.000158338 Jy
! Total flux subtracted in 200 components = -0.000158338 Jy
! Clean residual min=-0.008043 max=0.007684 Jy/beam
! Clean residual mean=-0.000007 rms=0.002550 Jy/beam
! Combined flux in latest and established models = 0.0818933 Jy
! Adding 53 model components to the UV plane model.
! The established model now contains 164 components and 0.0818933 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.436 mas, bmaj=12.47 mas, bpa=9.852 degrees
! Estimated noise=0.852634 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000285267 Jy
! Component: 100  -  total flux cleaned = 0.000120997 Jy
! Component: 150  -  total flux cleaned = 4.24398e-06 Jy
! Component: 200  -  total flux cleaned = -0.000183449 Jy
! Total flux subtracted in 200 components = -0.000183449 Jy
! Clean residual min=-0.007504 max=0.007104 Jy/beam
! Clean residual mean=-0.000001 rms=0.002317 Jy/beam
! Combined flux in latest and established models = 0.0817099 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 177 components and 0.0817099 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.052598Jy  sigma=0.710566
! Fit after  self-cal, rms=0.052550Jy  sigma=0.709804
wmodel /scr/pima/bp192a1_uvs/J2352-3316_X_map.mod
! Writing 177 model components to file: /scr/pima/bp192a1_uvs/J2352-3316_X_map.mod
wobs /scr/pima/bp192a1_uvs/J2352-3316_X_uvs.fits
! Writing UV FITS file: /scr/pima/bp192a1_uvs/J2352-3316_X_uvs.fits
wwins /scr/pima/bp192a1_uvs/J2352-3316_X_map.win
! wwins: Wrote 1 windows to /scr/pima/bp192a1_uvs/J2352-3316_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00198471 Jy
! Component: 100  -  total flux cleaned = -0.0021085 Jy
! Component: 150  -  total flux cleaned = -0.00183345 Jy
! Component: 200  -  total flux cleaned = -0.00175838 Jy
! Component: 250  -  total flux cleaned = -0.00169101 Jy
! Component: 300  -  total flux cleaned = -0.00129828 Jy
! Component: 350  -  total flux cleaned = -0.000692775 Jy
! Component: 400  -  total flux cleaned = -0.000135549 Jy
! Component: 450  -  total flux cleaned = 0.0003791 Jy
! Component: 500  -  total flux cleaned = 0.000858686 Jy
! Component: 550  -  total flux cleaned = 0.00134989 Jy
! Component: 600  -  total flux cleaned = 0.00181096 Jy
! Component: 650  -  total flux cleaned = 0.00224504 Jy
! Component: 700  -  total flux cleaned = 0.00254282 Jy
! Component: 750  -  total flux cleaned = 0.00275517 Jy
! Component: 800  -  total flux cleaned = 0.00295692 Jy
! Component: 850  -  total flux cleaned = 0.00315068 Jy
! Component: 900  -  total flux cleaned = 0.00333771 Jy
! Component: 950  -  total flux cleaned = 0.00339752 Jy
! Component: 1000  -  total flux cleaned = 0.0034551 Jy
! Component: 1050  -  total flux cleaned = 0.00348306 Jy
! Component: 1100  -  total flux cleaned = 0.00348331 Jy
! Component: 1150  -  total flux cleaned = 0.00345663 Jy
! Component: 1200  -  total flux cleaned = 0.00345667 Jy
! Component: 1250  -  total flux cleaned = 0.00350756 Jy
! Component: 1300  -  total flux cleaned = 0.00350818 Jy
! Component: 1350  -  total flux cleaned = 0.00358169 Jy
! Component: 1400  -  total flux cleaned = 0.00360544 Jy
! Component: 1450  -  total flux cleaned = 0.00358176 Jy
! Component: 1500  -  total flux cleaned = 0.00358142 Jy
! Component: 1550  -  total flux cleaned = 0.00358139 Jy
! Component: 1600  -  total flux cleaned = 0.00364854 Jy
! Component: 1650  -  total flux cleaned = 0.00375909 Jy
! Component: 1700  -  total flux cleaned = 0.0038465 Jy
! Component: 1750  -  total flux cleaned = 0.00393312 Jy
! Component: 1800  -  total flux cleaned = 0.00401874 Jy
! Component: 1850  -  total flux cleaned = 0.0041246 Jy
! Component: 1900  -  total flux cleaned = 0.00420822 Jy
! Component: 1950  -  total flux cleaned = 0.004291 Jy
! Component: 2000  -  total flux cleaned = 0.00437297 Jy
! Component: 2050  -  total flux cleaned = 0.00449466 Jy
! Component: 2100  -  total flux cleaned = 0.00455482 Jy
! Component: 2150  -  total flux cleaned = 0.00459478 Jy
! Component: 2200  -  total flux cleaned = 0.00465438 Jy
! Component: 2250  -  total flux cleaned = 0.00471363 Jy
! Component: 2300  -  total flux cleaned = 0.00481205 Jy
! Component: 2350  -  total flux cleaned = 0.00490996 Jy
! Component: 2400  -  total flux cleaned = 0.0050079 Jy
! Component: 2450  -  total flux cleaned = 0.0050667 Jy
! Component: 2500  -  total flux cleaned = 0.00514564 Jy
! Component: 2550  -  total flux cleaned = 0.00516541 Jy
! Component: 2600  -  total flux cleaned = 0.00518537 Jy
! Component: 2650  -  total flux cleaned = 0.00518512 Jy
! Component: 2700  -  total flux cleaned = 0.00524599 Jy
! Component: 2750  -  total flux cleaned = 0.00530767 Jy
! Component: 2800  -  total flux cleaned = 0.00536989 Jy
! Component: 2850  -  total flux cleaned = 0.00541244 Jy
! Component: 2900  -  total flux cleaned = 0.00543436 Jy
! Component: 2950  -  total flux cleaned = 0.00547778 Jy
! Component: 3000  -  total flux cleaned = 0.00552202 Jy
! Component: 3050  -  total flux cleaned = 0.00554445 Jy
! Component: 3100  -  total flux cleaned = 0.00561343 Jy
! Component: 3150  -  total flux cleaned = 0.00561358 Jy
! Component: 3200  -  total flux cleaned = 0.00566091 Jy
! Component: 3250  -  total flux cleaned = 0.00568499 Jy
! Component: 3300  -  total flux cleaned = 0.00570954 Jy
! Component: 3350  -  total flux cleaned = 0.00575952 Jy
! Component: 3400  -  total flux cleaned = 0.00581047 Jy
! Component: 3450  -  total flux cleaned = 0.00583616 Jy
! Component: 3500  -  total flux cleaned = 0.00583649 Jy
! Component: 3550  -  total flux cleaned = 0.00583626 Jy
! Component: 3600  -  total flux cleaned = 0.0058639 Jy
! Component: 3650  -  total flux cleaned = 0.00589181 Jy
! Component: 3700  -  total flux cleaned = 0.00589181 Jy
! Component: 3750  -  total flux cleaned = 0.00592079 Jy
! Component: 3800  -  total flux cleaned = 0.00595024 Jy
! Component: 3850  -  total flux cleaned = 0.0059496 Jy
! Component: 3900  -  total flux cleaned = 0.00598032 Jy
! Component: 3950  -  total flux cleaned = 0.00598035 Jy
! Component: 4000  -  total flux cleaned = 0.00601157 Jy
! Component: 4050  -  total flux cleaned = 0.00601195 Jy
! Total flux subtracted in 4096 components = 0.00601125 Jy
! Clean residual min=-0.001755 max=0.001763 Jy/beam
! Clean residual mean=-0.000014 rms=0.000596 Jy/beam
! Combined flux in latest and established models = 0.0877211 Jy
keep
! Adding 446 model components to the UV plane model.
! The established model now contains 623 components and 0.0877212 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bp192a1_uvs/J2352-3316_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.436 x 12.47 at 9.852 degrees (North through East)
! Clean map  min=-0.0094102  max=0.066174 Jy/beam
! Writing clean map to FITS file: /scr/pima/bp192a1_uvs/J2352-3316_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0661737 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000631218 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -2.86164 2.86164 5.72328 11.4466 22.8931 45.7863 91.5725
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0018 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.066 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  104.834 
quit
! Quitting program
! Log file /scr/pima/bp192a1_uvs/J2352-3316_X_uvs.log closed on Wed Sep 16 13:34:04 2015