! Started logfile: /scr/pima/bp192a1_uvs/J2337-0230_C_uvs.log on Wed Sep 16 13:34:29 2015
obs /scr/pima/bp192a1_uvs/J2337-0230_C_uva.fits
! Reading UV FITS file: /scr/pima/bp192a1_uvs/J2337-0230_C_uva.fits
! AN table 1: 35 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.659524 visibilities/baseline/integration-bin.
! Found source: J2337-0230
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    4.128e+09      3.2e+07          1      3.2e+07
!  02        2     4.16e+09      3.2e+07          1      3.2e+07
!  03        3    4.192e+09      3.2e+07          1      3.2e+07
!  04        4    4.224e+09      3.2e+07          1      3.2e+07
!  05        5    4.416e+09      3.2e+07          1      3.2e+07
!  06        6    4.512e+09      3.2e+07          1      3.2e+07
!  07        7    4.544e+09      3.2e+07          1      3.2e+07
!  08        8    4.576e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 6648 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.3 
print "taper_size =", taper_size
! taper_size = 40 
![@/home/lpetrov/bin/01_muppet /scr/pima/bp192a1_uvs/J2337-0230_C]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 88 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 88 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 88 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 88 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 88 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 88 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 88 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 88 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.140055Jy  sigma=23.990613
! Fit after  self-cal, rms=0.539953Jy  sigma=11.306935
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.323 mas, bmaj=3.332 mas, bpa=-3.572 degrees
! Estimated noise=0.576058 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.359988 Jy
! Component: 100  -  total flux cleaned = 0.466137 Jy
! Total flux subtracted in 100 components = 0.466137 Jy
! Clean residual min=-0.026819 max=0.046598 Jy/beam
! Clean residual mean=0.000037 rms=0.007503 Jy/beam
! Combined flux in latest and established models = 0.466137 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.466137 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.148448Jy  sigma=3.094782
! Fit after  self-cal, rms=0.147877Jy  sigma=3.082780
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.051524 Jy
! Component: 100  -  total flux cleaned = 0.0781805 Jy
! Total flux subtracted in 100 components = 0.0781805 Jy
! Clean residual min=-0.022744 max=0.029183 Jy/beam
! Clean residual mean=0.000020 rms=0.005540 Jy/beam
! Combined flux in latest and established models = 0.544317 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 14 components and 0.544317 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.126706Jy  sigma=2.666291
! Fit after  self-cal, rms=0.126554Jy  sigma=2.664302
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.513 mas, bmaj=3.763 mas, bpa=-3.341 degrees
! Estimated noise=0.433495 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.015629 Jy
! Component: 100  -  total flux cleaned = 0.0225675 Jy
! Component: 150  -  total flux cleaned = 0.0247506 Jy
! Component: 200  -  total flux cleaned = 0.0243412 Jy
! Total flux subtracted in 200 components = 0.0243412 Jy
! Clean residual min=-0.027443 max=0.031552 Jy/beam
! Clean residual mean=0.000044 rms=0.006824 Jy/beam
! Combined flux in latest and established models = 0.568658 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 22 components and 0.568658 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.124493Jy  sigma=2.638158
! Fit after  self-cal, rms=0.124443Jy  sigma=2.637440
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.513 x 3.763 at -3.341 degrees (North through East)
! Clean map  min=-0.026479  max=0.47661 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Correcting IF 2.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Correcting IF 3.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.97     HN        0.97     KP        0.85     
!   LA        1.18     MK        0.93     NL        1.07     PT        0.90     
!   SC        0.99     
! 
! 
! Correcting IF 4.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Correcting IF 5.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Correcting IF 6.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Correcting IF 7.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Correcting IF 8.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Fit before self-cal, rms=0.124443Jy  sigma=2.637440
! Fit after  self-cal, rms=0.123952Jy  sigma=2.602426
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.523 mas, bmaj=3.772 mas, bpa=-3.372 degrees
! Estimated noise=0.432668 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000557517 Jy
! Component: 100  -  total flux cleaned = -0.00129531 Jy
! Component: 150  -  total flux cleaned = -0.00176412 Jy
! Component: 200  -  total flux cleaned = -0.00197238 Jy
! Total flux subtracted in 200 components = -0.00197238 Jy
! Clean residual min=-0.024686 max=0.029826 Jy/beam
! Clean residual mean=0.000045 rms=0.006327 Jy/beam
! Combined flux in latest and established models = 0.566686 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 24 components and 0.566686 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.123849Jy  sigma=2.599816
! Fit after  self-cal, rms=0.123838Jy  sigma=2.599660
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.123838Jy  sigma=2.599660
! Fit after  self-cal, rms=0.123820Jy  sigma=2.599637
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.523 mas, bmaj=3.773 mas, bpa=-3.381 degrees
! Estimated noise=0.432602 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000160807 Jy
! Component: 100  -  total flux cleaned = -0.000415042 Jy
! Component: 150  -  total flux cleaned = -0.000591961 Jy
! Component: 200  -  total flux cleaned = -0.000702827 Jy
! Total flux subtracted in 200 components = -0.000702827 Jy
! Clean residual min=-0.024558 max=0.029781 Jy/beam
! Clean residual mean=0.000046 rms=0.006320 Jy/beam
! Combined flux in latest and established models = 0.565983 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 28 components and 0.565983 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.123770Jy  sigma=2.598384
! Fit after  self-cal, rms=0.123763Jy  sigma=2.598331
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (11.4, 49.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0195022 Jy
! Component: 100  -  total flux cleaned = 0.0243752 Jy
! Component: 150  -  total flux cleaned = 0.0270232 Jy
! Component: 200  -  total flux cleaned = 0.0281816 Jy
! Total flux subtracted in 200 components = 0.0281816 Jy
! Clean residual min=-0.021194 max=0.022709 Jy/beam
! Clean residual mean=0.000073 rms=0.005303 Jy/beam
! Combined flux in latest and established models = 0.594165 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 61 components and 0.594165 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.118401Jy  sigma=2.468205
! Fit after  self-cal, rms=0.117755Jy  sigma=2.454960
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.117755Jy  sigma=2.454960
! Fit after  self-cal, rms=0.113913Jy  sigma=2.251023
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.522 mas, bmaj=3.777 mas, bpa=-3.324 degrees
! Estimated noise=0.434865 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0053155 Jy
! Component: 100  -  total flux cleaned = -0.00793486 Jy
! Component: 150  -  total flux cleaned = -0.00981954 Jy
! Component: 200  -  total flux cleaned = -0.0112824 Jy
! Total flux subtracted in 200 components = -0.0112824 Jy
! Clean residual min=-0.013200 max=0.014683 Jy/beam
! Clean residual mean=0.000075 rms=0.003558 Jy/beam
! Combined flux in latest and established models = 0.582883 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 86 components and 0.582882 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.113081Jy  sigma=2.238608
! Fit after  self-cal, rms=0.113065Jy  sigma=2.237944
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00141326 Jy
! Component: 100  -  total flux cleaned = -0.00184513 Jy
! Component: 150  -  total flux cleaned = -0.00224378 Jy
! Component: 200  -  total flux cleaned = -0.00252391 Jy
! Total flux subtracted in 200 components = -0.00252391 Jy
! Clean residual min=-0.012814 max=0.014246 Jy/beam
! Clean residual mean=0.000072 rms=0.003509 Jy/beam
! Combined flux in latest and established models = 0.580359 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 102 components and 0.580358 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.112834Jy  sigma=2.235149
! Fit after  self-cal, rms=0.112830Jy  sigma=2.235037
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.112830Jy  sigma=2.235037
! Fit after  self-cal, rms=0.113307Jy  sigma=2.201189
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.654 mas, bmaj=6.035 mas, bpa=7.808 degrees
! Estimated noise=0.550416 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0030888 Jy
! Component: 100  -  total flux cleaned = -0.00533556 Jy
! Component: 150  -  total flux cleaned = -0.00645915 Jy
! Component: 200  -  total flux cleaned = -0.00696709 Jy
! Total flux subtracted in 200 components = -0.00696709 Jy
! Clean residual min=-0.021210 max=0.019079 Jy/beam
! Clean residual mean=0.000146 rms=0.006048 Jy/beam
! Combined flux in latest and established models = 0.573391 Jy
selfcal
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 123 components and 0.573391 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.113196Jy  sigma=2.194815
! Fit after  self-cal, rms=0.113139Jy  sigma=2.193410
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000762137 Jy
! Component: 100  -  total flux cleaned = 0.000293462 Jy
! Component: 150  -  total flux cleaned = -0.000266433 Jy
! Component: 200  -  total flux cleaned = -0.000621779 Jy
! Total flux subtracted in 200 components = -0.000621779 Jy
! Clean residual min=-0.021120 max=0.018557 Jy/beam
! Clean residual mean=0.000133 rms=0.005962 Jy/beam
! Combined flux in latest and established models = 0.57277 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 132 components and 0.57277 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.113170Jy  sigma=2.193758
! Fit after  self-cal, rms=0.113156Jy  sigma=2.193370
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.519 mas, bmaj=3.775 mas, bpa=-3.329 degrees
! Estimated noise=0.437246 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.519 x 3.775 at -3.329 degrees (North through East)
! Clean map  min=-0.012704  max=0.47107 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.326 mas, bmaj=3.341 mas, bpa=-3.317 degrees
! Estimated noise=0.527118 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.362133 Jy
! Component: 100  -  total flux cleaned = 0.47178 Jy
! Component: 150  -  total flux cleaned = 0.523974 Jy
! Component: 200  -  total flux cleaned = 0.553165 Jy
! Total flux subtracted in 200 components = 0.553165 Jy
! Clean residual min=-0.014996 max=0.015572 Jy/beam
! Clean residual mean=0.000026 rms=0.003868 Jy/beam
! Combined flux in latest and established models = 0.553165 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 14 model components to the UV plane model.
! The established model now contains 14 components and 0.553165 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.519 mas, bmaj=3.775 mas, bpa=-3.329 degrees
! Estimated noise=0.437246 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0132697 Jy
! Component: 100  -  total flux cleaned = 0.0192524 Jy
! Component: 150  -  total flux cleaned = 0.0225975 Jy
! Component: 200  -  total flux cleaned = 0.0238888 Jy
! Total flux subtracted in 200 components = 0.0238888 Jy
! Clean residual min=-0.014424 max=0.012544 Jy/beam
! Clean residual mean=0.000078 rms=0.003582 Jy/beam
! Combined flux in latest and established models = 0.577054 Jy
! Adding 37 model components to the UV plane model.
! The established model now contains 44 components and 0.577054 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.654 mas, bmaj=6.035 mas, bpa=7.808 degrees
! Estimated noise=0.550416 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0027196 Jy
! Component: 100  -  total flux cleaned = -0.00268835 Jy
! Component: 150  -  total flux cleaned = -0.00267486 Jy
! Component: 200  -  total flux cleaned = -0.00268632 Jy
! Total flux subtracted in 200 components = -0.00268632 Jy
! Clean residual min=-0.022083 max=0.018354 Jy/beam
! Clean residual mean=0.000141 rms=0.006111 Jy/beam
! Combined flux in latest and established models = 0.574367 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000291699 Jy
! Component: 100  -  total flux cleaned = -0.000544312 Jy
! Component: 150  -  total flux cleaned = -0.000658008 Jy
! Component: 200  -  total flux cleaned = -0.000656148 Jy
! Total flux subtracted in 200 components = -0.000656148 Jy
! Clean residual min=-0.021725 max=0.018195 Jy/beam
! Clean residual mean=0.000134 rms=0.006005 Jy/beam
! Combined flux in latest and established models = 0.573711 Jy
! Adding 44 model components to the UV plane model.
! The established model now contains 81 components and 0.573711 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.519 mas, bmaj=3.775 mas, bpa=-3.329 degrees
! Estimated noise=0.437246 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000532366 Jy
! Component: 100  -  total flux cleaned = 0.000826209 Jy
! Component: 150  -  total flux cleaned = 0.000828335 Jy
! Component: 200  -  total flux cleaned = 0.00071877 Jy
! Total flux subtracted in 200 components = 0.00071877 Jy
! Clean residual min=-0.012654 max=0.011944 Jy/beam
! Clean residual mean=0.000060 rms=0.003309 Jy/beam
! Combined flux in latest and established models = 0.57443 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 97 components and 0.57443 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.113183Jy  sigma=2.196065
! Fit after  self-cal, rms=0.113163Jy  sigma=2.195559
wmodel /scr/pima/bp192a1_uvs/J2337-0230_C_map.mod
! Writing 97 model components to file: /scr/pima/bp192a1_uvs/J2337-0230_C_map.mod
wobs /scr/pima/bp192a1_uvs/J2337-0230_C_uvs.fits
! Writing UV FITS file: /scr/pima/bp192a1_uvs/J2337-0230_C_uvs.fits
wwins /scr/pima/bp192a1_uvs/J2337-0230_C_map.win
! wwins: Wrote 2 windows to /scr/pima/bp192a1_uvs/J2337-0230_C_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00262741 Jy
! Component: 100  -  total flux cleaned = -0.00325787 Jy
! Component: 150  -  total flux cleaned = -0.00443693 Jy
! Component: 200  -  total flux cleaned = -0.00572163 Jy
! Component: 250  -  total flux cleaned = -0.00676449 Jy
! Component: 300  -  total flux cleaned = -0.00743043 Jy
! Component: 350  -  total flux cleaned = -0.00758496 Jy
! Component: 400  -  total flux cleaned = -0.00727851 Jy
! Component: 450  -  total flux cleaned = -0.00756754 Jy
! Component: 500  -  total flux cleaned = -0.00770656 Jy
! Component: 550  -  total flux cleaned = -0.0079703 Jy
! Component: 600  -  total flux cleaned = -0.00783951 Jy
! Component: 650  -  total flux cleaned = -0.00796416 Jy
! Component: 700  -  total flux cleaned = -0.00796569 Jy
! Component: 750  -  total flux cleaned = -0.00819604 Jy
! Component: 800  -  total flux cleaned = -0.00819275 Jy
! Component: 850  -  total flux cleaned = -0.00808468 Jy
! Component: 900  -  total flux cleaned = -0.00829137 Jy
! Component: 950  -  total flux cleaned = -0.00839084 Jy
! Component: 1000  -  total flux cleaned = -0.00858567 Jy
! Component: 1050  -  total flux cleaned = -0.00858583 Jy
! Component: 1100  -  total flux cleaned = -0.00858642 Jy
! Component: 1150  -  total flux cleaned = -0.00832015 Jy
! Component: 1200  -  total flux cleaned = -0.00840839 Jy
! Component: 1250  -  total flux cleaned = -0.00832198 Jy
! Component: 1300  -  total flux cleaned = -0.0079934 Jy
! Component: 1350  -  total flux cleaned = -0.0079163 Jy
! Component: 1400  -  total flux cleaned = -0.00807365 Jy
! Component: 1450  -  total flux cleaned = -0.00799635 Jy
! Component: 1500  -  total flux cleaned = -0.00806907 Jy
! Component: 1550  -  total flux cleaned = -0.00799744 Jy
! Component: 1600  -  total flux cleaned = -0.00813943 Jy
! Component: 1650  -  total flux cleaned = -0.00848553 Jy
! Component: 1700  -  total flux cleaned = -0.00862117 Jy
! Component: 1750  -  total flux cleaned = -0.00868685 Jy
! Component: 1800  -  total flux cleaned = -0.00849253 Jy
! Component: 1850  -  total flux cleaned = -0.00849264 Jy
! Component: 1900  -  total flux cleaned = -0.00842974 Jy
! Component: 1950  -  total flux cleaned = -0.00830629 Jy
! Component: 2000  -  total flux cleaned = -0.00836821 Jy
! Component: 2050  -  total flux cleaned = -0.00836826 Jy
! Component: 2100  -  total flux cleaned = -0.00825205 Jy
! Component: 2150  -  total flux cleaned = -0.00819612 Jy
! Component: 2200  -  total flux cleaned = -0.00797076 Jy
! Component: 2250  -  total flux cleaned = -0.00791557 Jy
! Component: 2300  -  total flux cleaned = -0.00786137 Jy
! Component: 2350  -  total flux cleaned = -0.0078073 Jy
! Component: 2400  -  total flux cleaned = -0.00786079 Jy
! Component: 2450  -  total flux cleaned = -0.00780839 Jy
! Component: 2500  -  total flux cleaned = -0.00770516 Jy
! Component: 2550  -  total flux cleaned = -0.00760323 Jy
! Component: 2600  -  total flux cleaned = -0.00760306 Jy
! Component: 2650  -  total flux cleaned = -0.00760245 Jy
! Component: 2700  -  total flux cleaned = -0.0074542 Jy
! Component: 2750  -  total flux cleaned = -0.00735684 Jy
! Component: 2800  -  total flux cleaned = -0.00726055 Jy
! Component: 2850  -  total flux cleaned = -0.007213 Jy
! Component: 2900  -  total flux cleaned = -0.00711974 Jy
! Component: 2950  -  total flux cleaned = -0.00693417 Jy
! Component: 3000  -  total flux cleaned = -0.00679686 Jy
! Component: 3050  -  total flux cleaned = -0.00661558 Jy
! Component: 3100  -  total flux cleaned = -0.00652525 Jy
! Component: 3150  -  total flux cleaned = -0.00630238 Jy
! Component: 3200  -  total flux cleaned = -0.00599376 Jy
! Component: 3250  -  total flux cleaned = -0.00595039 Jy
! Component: 3300  -  total flux cleaned = -0.00577735 Jy
! Component: 3350  -  total flux cleaned = -0.00539201 Jy
! Component: 3400  -  total flux cleaned = -0.00526456 Jy
! Component: 3450  -  total flux cleaned = -0.0049691 Jy
! Component: 3500  -  total flux cleaned = -0.00475994 Jy
! Component: 3550  -  total flux cleaned = -0.00467672 Jy
! Component: 3600  -  total flux cleaned = -0.00451197 Jy
! Component: 3650  -  total flux cleaned = -0.00438919 Jy
! Component: 3700  -  total flux cleaned = -0.0042269 Jy
! Component: 3750  -  total flux cleaned = -0.00398529 Jy
! Component: 3800  -  total flux cleaned = -0.00382565 Jy
! Component: 3850  -  total flux cleaned = -0.00358701 Jy
! Component: 3900  -  total flux cleaned = -0.00346831 Jy
! Component: 3950  -  total flux cleaned = -0.00327209 Jy
! Component: 4000  -  total flux cleaned = -0.00315503 Jy
! Component: 4050  -  total flux cleaned = -0.00292235 Jy
! Total flux subtracted in 4096 components = -0.00280659 Jy
! Clean residual min=-0.002096 max=0.002094 Jy/beam
! Clean residual mean=0.000022 rms=0.000717 Jy/beam
! Combined flux in latest and established models = 0.571624 Jy
keep
! Adding 384 model components to the UV plane model.
! The established model now contains 481 components and 0.571623 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bp192a1_uvs/J2337-0230_C\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.519 x 3.775 at -3.329 degrees (North through East)
! Clean map  min=-0.012565  max=0.47127 Jy/beam
! Writing clean map to FITS file: /scr/pima/bp192a1_uvs/J2337-0230_C_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.471266 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000686201 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.436824 0.436824 0.873648 1.7473 3.49459 6.98918 13.9784 27.9567 55.9134
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.002 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.471 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  686.775 
quit
! Quitting program
! Log file /scr/pima/bp192a1_uvs/J2337-0230_C_uvs.log closed on Wed Sep 16 13:34:34 2015