! Started logfile: /scr/pima/bp192a1_uvs/J2316+0221_C_uvs.log on Wed Sep 16 13:34:14 2015
obs /scr/pima/bp192a1_uvs/J2316+0221_C_uva.fits
! Reading UV FITS file: /scr/pima/bp192a1_uvs/J2316+0221_C_uva.fits
! AN table 1: 34 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.782353 visibilities/baseline/integration-bin.
! Found source: J2316+0221
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    4.128e+09      3.2e+07          1      3.2e+07
!  02        2     4.16e+09      3.2e+07          1      3.2e+07
!  03        3    4.192e+09      3.2e+07          1      3.2e+07
!  04        4    4.224e+09      3.2e+07          1      3.2e+07
!  05        5    4.416e+09      3.2e+07          1      3.2e+07
!  06        6    4.512e+09      3.2e+07          1      3.2e+07
!  07        7    4.544e+09      3.2e+07          1      3.2e+07
!  08        8    4.576e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 9576 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.3 
print "taper_size =", taper_size
! taper_size = 40 
![@/home/lpetrov/bin/01_muppet /scr/pima/bp192a1_uvs/J2316+0221_C]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 79 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 79 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 79 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.001263Jy  sigma=23.077223
! Fit after  self-cal, rms=0.941215Jy  sigma=21.748621
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.312 mas, bmaj=3.401 mas, bpa=-1.398 degrees
! Estimated noise=0.471707 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0445249 Jy
! Component: 100  -  total flux cleaned = 0.0542934 Jy
! Total flux subtracted in 100 components = 0.0542934 Jy
! Clean residual min=-0.002515 max=0.003290 Jy/beam
! Clean residual mean=-0.000004 rms=0.000764 Jy/beam
! Combined flux in latest and established models = 0.0542934 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.0542934 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.039677Jy  sigma=0.729653
! Fit after  self-cal, rms=0.039529Jy  sigma=0.725814
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.635 mas, bmaj=3.899 mas, bpa=1.501 degrees
! Estimated noise=0.337295 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00297233 Jy
! Component: 100  -  total flux cleaned = 0.00431703 Jy
! Component: 150  -  total flux cleaned = 0.00506428 Jy
! Component: 200  -  total flux cleaned = 0.00551565 Jy
! Total flux subtracted in 200 components = 0.00551565 Jy
! Clean residual min=-0.003309 max=0.002645 Jy/beam
! Clean residual mean=-0.000001 rms=0.000706 Jy/beam
! Combined flux in latest and established models = 0.0598091 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 30 components and 0.0598091 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.039086Jy  sigma=0.724620
! Fit after  self-cal, rms=0.039086Jy  sigma=0.724541
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.635 x 3.899 at 1.501 degrees (North through East)
! Clean map  min=-0.0032061  max=0.057073 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.05     HN        1.04     KP        0.89     
!   LA        1.06     MK        0.99     NL        1.07     OV        0.98     
!   PT        1.00*    SC        1.03     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 5.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 6.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 7.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 8.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        0.99     HN        1.01     KP        0.96     
!   LA        1.14     MK        0.94     NL        0.95     OV        0.98     
!   PT        1.00*    SC        1.00     
! 
! 
! Fit before self-cal, rms=0.039086Jy  sigma=0.724541
! Fit after  self-cal, rms=0.039184Jy  sigma=0.723126
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.63 mas, bmaj=3.903 mas, bpa=1.292 degrees
! Estimated noise=0.339523 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000623151 Jy
! Component: 100  -  total flux cleaned = 0.000859458 Jy
! Component: 150  -  total flux cleaned = 0.000924048 Jy
! Component: 200  -  total flux cleaned = 0.000971958 Jy
! Total flux subtracted in 200 components = 0.000971958 Jy
! Clean residual min=-0.003108 max=0.002413 Jy/beam
! Clean residual mean=-0.000001 rms=0.000679 Jy/beam
! Combined flux in latest and established models = 0.0607811 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 37 components and 0.0607811 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.039141Jy  sigma=0.723502
! Fit after  self-cal, rms=0.039140Jy  sigma=0.723464
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.039140Jy  sigma=0.723464
! Fit after  self-cal, rms=0.039171Jy  sigma=0.723433
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.629 mas, bmaj=3.901 mas, bpa=1.249 degrees
! Estimated noise=0.339997 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000262637 Jy
! Component: 100  -  total flux cleaned = 0.000305612 Jy
! Component: 150  -  total flux cleaned = 0.000336855 Jy
! Component: 200  -  total flux cleaned = 0.00034822 Jy
! Total flux subtracted in 200 components = 0.00034822 Jy
! Clean residual min=-0.003114 max=0.002402 Jy/beam
! Clean residual mean=-0.000001 rms=0.000679 Jy/beam
! Combined flux in latest and established models = 0.0611293 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 39 components and 0.0611293 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.039159Jy  sigma=0.723558
! Fit after  self-cal, rms=0.039159Jy  sigma=0.723556
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.8962e-05 Jy
! Component: 100  -  total flux cleaned = 3.45511e-05 Jy
! Component: 150  -  total flux cleaned = 4.44075e-05 Jy
! Component: 200  -  total flux cleaned = 5.3616e-05 Jy
! Total flux subtracted in 200 components = 5.3616e-05 Jy
! Clean residual min=-0.003110 max=0.002400 Jy/beam
! Clean residual mean=-0.000001 rms=0.000679 Jy/beam
! Combined flux in latest and established models = 0.0611829 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 41 components and 0.0611829 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.039157Jy  sigma=0.723532
! Fit after  self-cal, rms=0.039157Jy  sigma=0.723530
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.039157Jy  sigma=0.723530
! Fit after  self-cal, rms=0.039162Jy  sigma=0.723526
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.628 mas, bmaj=3.9 mas, bpa=1.23 degrees
! Estimated noise=0.340081 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.05795e-05 Jy
! Component: 100  -  total flux cleaned = 6.51381e-05 Jy
! Component: 150  -  total flux cleaned = 7.42041e-05 Jy
! Component: 200  -  total flux cleaned = 8.28125e-05 Jy
! Total flux subtracted in 200 components = 8.28125e-05 Jy
! Clean residual min=-0.003107 max=0.002391 Jy/beam
! Clean residual mean=-0.000001 rms=0.000678 Jy/beam
! Combined flux in latest and established models = 0.0612657 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 42 components and 0.0612657 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.039159Jy  sigma=0.723538
! Fit after  self-cal, rms=0.039159Jy  sigma=0.723536
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.09444e-05 Jy
! Component: 100  -  total flux cleaned = 1.96436e-05 Jy
! Component: 150  -  total flux cleaned = 2.37259e-05 Jy
! Component: 200  -  total flux cleaned = 3.12643e-05 Jy
! Total flux subtracted in 200 components = 3.12643e-05 Jy
! Clean residual min=-0.003105 max=0.002389 Jy/beam
! Clean residual mean=-0.000001 rms=0.000678 Jy/beam
! Combined flux in latest and established models = 0.061297 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 44 components and 0.0612969 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.039158Jy  sigma=0.723522
! Fit after  self-cal, rms=0.039158Jy  sigma=0.723520
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.039158Jy  sigma=0.723520
! Fit after  self-cal, rms=0.039158Jy  sigma=0.723519
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.538 mas, bmaj=5.887 mas, bpa=3.635 degrees
! Estimated noise=0.431068 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000575381 Jy
! Component: 100  -  total flux cleaned = 0.000670184 Jy
! Component: 150  -  total flux cleaned = 0.000724696 Jy
! Component: 200  -  total flux cleaned = 0.000770442 Jy
! Total flux subtracted in 200 components = 0.000770442 Jy
! Clean residual min=-0.004186 max=0.003531 Jy/beam
! Clean residual mean=-0.000002 rms=0.001130 Jy/beam
! Combined flux in latest and established models = 0.0620674 Jy
selfcal
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 48 components and 0.0620674 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.039156Jy  sigma=0.723850
! Fit after  self-cal, rms=0.039157Jy  sigma=0.723844
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.56158e-05 Jy
! Component: 100  -  total flux cleaned = 8.37949e-05 Jy
! Component: 150  -  total flux cleaned = 0.000104822 Jy
! Component: 200  -  total flux cleaned = 0.000130618 Jy
! Total flux subtracted in 200 components = 0.000130618 Jy
! Clean residual min=-0.004163 max=0.003548 Jy/beam
! Clean residual mean=-0.000002 rms=0.001129 Jy/beam
! Combined flux in latest and established models = 0.062198 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 52 components and 0.062198 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.039163Jy  sigma=0.723864
! Fit after  self-cal, rms=0.039163Jy  sigma=0.723861
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.628 mas, bmaj=3.899 mas, bpa=1.219 degrees
! Estimated noise=0.340071 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.628 x 3.899 at 1.219 degrees (North through East)
! Clean map  min=-0.0029452  max=0.056975 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.307 mas, bmaj=3.401 mas, bpa=-1.614 degrees
! Estimated noise=0.473745 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0447674 Jy
! Component: 100  -  total flux cleaned = 0.054724 Jy
! Component: 150  -  total flux cleaned = 0.0580397 Jy
! Component: 200  -  total flux cleaned = 0.0597844 Jy
! Total flux subtracted in 200 components = 0.0597844 Jy
! Clean residual min=-0.002490 max=0.002695 Jy/beam
! Clean residual mean=-0.000004 rms=0.000705 Jy/beam
! Combined flux in latest and established models = 0.0597844 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 17 model components to the UV plane model.
! The established model now contains 17 components and 0.0597844 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.628 mas, bmaj=3.899 mas, bpa=1.219 degrees
! Estimated noise=0.340071 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000779503 Jy
! Component: 100  -  total flux cleaned = 0.00113571 Jy
! Component: 150  -  total flux cleaned = 0.00122214 Jy
! Component: 200  -  total flux cleaned = 0.00127201 Jy
! Total flux subtracted in 200 components = 0.00127201 Jy
! Clean residual min=-0.003090 max=0.002383 Jy/beam
! Clean residual mean=-0.000001 rms=0.000678 Jy/beam
! Combined flux in latest and established models = 0.0610565 Jy
! Adding 14 model components to the UV plane model.
! The established model now contains 30 components and 0.0610565 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.538 mas, bmaj=5.887 mas, bpa=3.635 degrees
! Estimated noise=0.431068 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000675635 Jy
! Component: 100  -  total flux cleaned = 0.000840176 Jy
! Component: 150  -  total flux cleaned = 0.000886101 Jy
! Component: 200  -  total flux cleaned = 0.000936522 Jy
! Total flux subtracted in 200 components = 0.000936522 Jy
! Clean residual min=-0.004196 max=0.003522 Jy/beam
! Clean residual mean=-0.000002 rms=0.001130 Jy/beam
! Combined flux in latest and established models = 0.061993 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.3958e-05 Jy
! Component: 100  -  total flux cleaned = 8.26439e-05 Jy
! Component: 150  -  total flux cleaned = 0.000103959 Jy
! Component: 200  -  total flux cleaned = 0.000123915 Jy
! Total flux subtracted in 200 components = 0.000123915 Jy
! Clean residual min=-0.004177 max=0.003540 Jy/beam
! Clean residual mean=-0.000002 rms=0.001129 Jy/beam
! Combined flux in latest and established models = 0.0621169 Jy
! Adding 8 model components to the UV plane model.
! The established model now contains 37 components and 0.0621169 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.628 mas, bmaj=3.899 mas, bpa=1.219 degrees
! Estimated noise=0.340071 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000565211 Jy
! Component: 100  -  total flux cleaned = -0.000622317 Jy
! Component: 150  -  total flux cleaned = -0.000633263 Jy
! Component: 200  -  total flux cleaned = -0.000642223 Jy
! Total flux subtracted in 200 components = -0.000642223 Jy
! Clean residual min=-0.003071 max=0.002418 Jy/beam
! Clean residual mean=-0.000001 rms=0.000678 Jy/beam
! Combined flux in latest and established models = 0.0614747 Jy
selfcal
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 42 components and 0.0614747 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.039161Jy  sigma=0.723520
! Fit after  self-cal, rms=0.039160Jy  sigma=0.723514
wmodel /scr/pima/bp192a1_uvs/J2316+0221_C_map.mod
! Writing 42 model components to file: /scr/pima/bp192a1_uvs/J2316+0221_C_map.mod
wobs /scr/pima/bp192a1_uvs/J2316+0221_C_uvs.fits
! Writing UV FITS file: /scr/pima/bp192a1_uvs/J2316+0221_C_uvs.fits
wwins /scr/pima/bp192a1_uvs/J2316+0221_C_map.win
! wwins: Wrote 1 windows to /scr/pima/bp192a1_uvs/J2316+0221_C_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00121758 Jy
! Component: 100  -  total flux cleaned = -0.00158468 Jy
! Component: 150  -  total flux cleaned = -0.0017966 Jy
! Component: 200  -  total flux cleaned = -0.00215451 Jy
! Component: 250  -  total flux cleaned = -0.00230731 Jy
! Component: 300  -  total flux cleaned = -0.00238184 Jy
! Component: 350  -  total flux cleaned = -0.00252529 Jy
! Component: 400  -  total flux cleaned = -0.0025948 Jy
! Component: 450  -  total flux cleaned = -0.00276441 Jy
! Component: 500  -  total flux cleaned = -0.0027973 Jy
! Component: 550  -  total flux cleaned = -0.00286146 Jy
! Component: 600  -  total flux cleaned = -0.00292423 Jy
! Component: 650  -  total flux cleaned = -0.00301542 Jy
! Component: 700  -  total flux cleaned = -0.00292504 Jy
! Component: 750  -  total flux cleaned = -0.00289612 Jy
! Component: 800  -  total flux cleaned = -0.00289649 Jy
! Component: 850  -  total flux cleaned = -0.00295272 Jy
! Component: 900  -  total flux cleaned = -0.00295251 Jy
! Component: 950  -  total flux cleaned = -0.00303373 Jy
! Component: 1000  -  total flux cleaned = -0.00300667 Jy
! Component: 1050  -  total flux cleaned = -0.00300717 Jy
! Component: 1100  -  total flux cleaned = -0.00305897 Jy
! Component: 1150  -  total flux cleaned = -0.00308431 Jy
! Component: 1200  -  total flux cleaned = -0.00310942 Jy
! Component: 1250  -  total flux cleaned = -0.0031586 Jy
! Component: 1300  -  total flux cleaned = -0.00315884 Jy
! Component: 1350  -  total flux cleaned = -0.00323062 Jy
! Component: 1400  -  total flux cleaned = -0.0032776 Jy
! Component: 1450  -  total flux cleaned = -0.00337027 Jy
! Component: 1500  -  total flux cleaned = -0.00341564 Jy
! Component: 1550  -  total flux cleaned = -0.00348286 Jy
! Component: 1600  -  total flux cleaned = -0.00348288 Jy
! Component: 1650  -  total flux cleaned = -0.00361431 Jy
! Component: 1700  -  total flux cleaned = -0.00365717 Jy
! Component: 1750  -  total flux cleaned = -0.00369999 Jy
! Component: 1800  -  total flux cleaned = -0.00378423 Jy
! Component: 1850  -  total flux cleaned = -0.00380505 Jy
! Component: 1900  -  total flux cleaned = -0.00392842 Jy
! Component: 1950  -  total flux cleaned = -0.00396876 Jy
! Component: 2000  -  total flux cleaned = -0.0040287 Jy
! Component: 2050  -  total flux cleaned = -0.00406846 Jy
! Component: 2100  -  total flux cleaned = -0.00412703 Jy
! Component: 2150  -  total flux cleaned = -0.00416567 Jy
! Component: 2200  -  total flux cleaned = -0.0042038 Jy
! Component: 2250  -  total flux cleaned = -0.00424184 Jy
! Component: 2300  -  total flux cleaned = -0.00427908 Jy
! Component: 2350  -  total flux cleaned = -0.0043161 Jy
! Component: 2400  -  total flux cleaned = -0.00435273 Jy
! Component: 2450  -  total flux cleaned = -0.00442516 Jy
! Component: 2500  -  total flux cleaned = -0.00442487 Jy
! Component: 2550  -  total flux cleaned = -0.00446035 Jy
! Component: 2600  -  total flux cleaned = -0.00447803 Jy
! Component: 2650  -  total flux cleaned = -0.00454782 Jy
! Component: 2700  -  total flux cleaned = -0.00463371 Jy
! Component: 2750  -  total flux cleaned = -0.00465079 Jy
! Component: 2800  -  total flux cleaned = -0.00466791 Jy
! Component: 2850  -  total flux cleaned = -0.0047519 Jy
! Component: 2900  -  total flux cleaned = -0.0048017 Jy
! Component: 2950  -  total flux cleaned = -0.00486751 Jy
! Component: 3000  -  total flux cleaned = -0.00488394 Jy
! Component: 3050  -  total flux cleaned = -0.00493247 Jy
! Component: 3100  -  total flux cleaned = -0.00496455 Jy
! Component: 3150  -  total flux cleaned = -0.00502807 Jy
! Component: 3200  -  total flux cleaned = -0.00505958 Jy
! Component: 3250  -  total flux cleaned = -0.00513774 Jy
! Component: 3300  -  total flux cleaned = -0.0051686 Jy
! Component: 3350  -  total flux cleaned = -0.00518402 Jy
! Component: 3400  -  total flux cleaned = -0.00524508 Jy
! Component: 3450  -  total flux cleaned = -0.00526008 Jy
! Component: 3500  -  total flux cleaned = -0.00532029 Jy
! Component: 3550  -  total flux cleaned = -0.00533516 Jy
! Component: 3600  -  total flux cleaned = -0.00537971 Jy
! Component: 3650  -  total flux cleaned = -0.00540904 Jy
! Component: 3700  -  total flux cleaned = -0.00545304 Jy
! Component: 3750  -  total flux cleaned = -0.00552555 Jy
! Component: 3800  -  total flux cleaned = -0.00552546 Jy
! Component: 3850  -  total flux cleaned = -0.00558272 Jy
! Component: 3900  -  total flux cleaned = -0.00561119 Jy
! Component: 3950  -  total flux cleaned = -0.00565344 Jy
! Component: 4000  -  total flux cleaned = -0.00569556 Jy
! Component: 4050  -  total flux cleaned = -0.00575112 Jy
! Total flux subtracted in 4096 components = -0.00573735 Jy
! Clean residual min=-0.000789 max=0.000689 Jy/beam
! Clean residual mean=-0.000002 rms=0.000263 Jy/beam
! Combined flux in latest and established models = 0.0557373 Jy
keep
! Adding 358 model components to the UV plane model.
! The established model now contains 400 components and 0.0557373 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bp192a1_uvs/J2316+0221_C\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.628 x 3.899 at 1.219 degrees (North through East)
! Clean map  min=-0.0017287  max=0.057571 Jy/beam
! Writing clean map to FITS file: /scr/pima/bp192a1_uvs/J2316+0221_C_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0575713 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000262454 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.36763 1.36763 2.73526 5.47051 10.941 21.8821 43.7641 87.5282
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0007 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.057 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  219.357 
quit
! Quitting program
! Log file /scr/pima/bp192a1_uvs/J2316+0221_C_uvs.log closed on Wed Sep 16 13:34:18 2015