! Started logfile: /scr/pima/bp192a1_uvs/J0632+1554_C_uvs.log on Wed Sep 16 13:33:34 2015
obs /scr/pima/bp192a1_uvs/J0632+1554_C_uva.fits
! Reading UV FITS file: /scr/pima/bp192a1_uvs/J0632+1554_C_uva.fits
! AN table 1: 36 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.871605 visibilities/baseline/integration-bin.
! Found source: J0632+1554
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    4.128e+09      3.2e+07          1      3.2e+07
!  02        2     4.16e+09      3.2e+07          1      3.2e+07
!  03        3    4.192e+09      3.2e+07          1      3.2e+07
!  04        4    4.224e+09      3.2e+07          1      3.2e+07
!  05        5    4.416e+09      3.2e+07          1      3.2e+07
!  06        6    4.512e+09      3.2e+07          1      3.2e+07
!  07        7    4.544e+09      3.2e+07          1      3.2e+07
!  08        8    4.576e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 11296 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.3 
print "taper_size =", taper_size
! taper_size = 40 
![@/home/lpetrov/bin/01_muppet /scr/pima/bp192a1_uvs/J0632+1554_C]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 33 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 33 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 33 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 33 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 33 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 33 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 33 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 33 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.000896Jy  sigma=24.968444
! Fit after  self-cal, rms=0.839757Jy  sigma=21.073603
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.444 mas, bmaj=3.481 mas, bpa=9.115 degrees
! Estimated noise=0.459558 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.120078 Jy
! Component: 100  -  total flux cleaned = 0.147504 Jy
! Total flux subtracted in 100 components = 0.147504 Jy
! Clean residual min=-0.005520 max=0.009975 Jy/beam
! Clean residual mean=0.000003 rms=0.001441 Jy/beam
! Combined flux in latest and established models = 0.147504 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.147504 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.046007Jy  sigma=0.913270
! Fit after  self-cal, rms=0.045963Jy  sigma=0.912082
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0100456 Jy
! Component: 100  -  total flux cleaned = 0.0144798 Jy
! Total flux subtracted in 100 components = 0.0144798 Jy
! Clean residual min=-0.005431 max=0.005080 Jy/beam
! Clean residual mean=0.000000 rms=0.001232 Jy/beam
! Combined flux in latest and established models = 0.161984 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 19 components and 0.161984 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.042635Jy  sigma=0.852849
! Fit after  self-cal, rms=0.042623Jy  sigma=0.852466
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.823 mas, bmaj=4.131 mas, bpa=7.439 degrees
! Estimated noise=0.272072 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00329163 Jy
! Component: 100  -  total flux cleaned = 0.00483421 Jy
! Component: 150  -  total flux cleaned = 0.00566469 Jy
! Component: 200  -  total flux cleaned = 0.00586898 Jy
! Total flux subtracted in 200 components = 0.00586898 Jy
! Clean residual min=-0.004645 max=0.004547 Jy/beam
! Clean residual mean=0.000003 rms=0.001126 Jy/beam
! Combined flux in latest and established models = 0.167853 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 30 components and 0.167853 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.042116Jy  sigma=0.851479
! Fit after  self-cal, rms=0.042107Jy  sigma=0.851267
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.823 x 4.131 at 7.439 degrees (North through East)
! Clean map  min=-0.0044422  max=0.15514 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.17     HN        0.97     KP        0.87     
!   LA        1.03     MK        1.08     NL        1.01     OV        0.99     
!   PT        0.87     SC        0.97     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.18     HN        1.00     KP        0.92     
!   LA        1.10     MK        1.00     NL        1.06     OV        1.03     
!   PT        0.96     SC        0.99     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.01     HN        1.01     KP        0.87     
!   LA        1.05     MK        0.97     NL        1.05     OV        1.01     
!   PT        0.94     SC        1.03     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 5.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.04     HN        1.03     KP        0.97     
!   LA        1.09     MK        1.06     NL        1.12     OV        0.97     
!   PT        0.91     SC        1.01     
! 
! 
! Correcting IF 6.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        0.99     HN        1.04     KP        0.93     
!   LA        1.17     MK        1.02     NL        1.09     OV        0.98     
!   PT        1.04     SC        1.05     
! 
! 
! Correcting IF 7.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.90     HN        0.99     KP        0.91     
!   LA        1.12     MK        1.00     NL        1.08     OV        0.98     
!   PT        0.94     SC        0.94     
! 
! 
! Correcting IF 8.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        0.98     HN        1.01     KP        0.94     
!   LA        1.11     MK        1.02     NL        1.01     OV        1.00     
!   PT        0.93     SC        0.98     
! 
! 
! Fit before self-cal, rms=0.042107Jy  sigma=0.851267
! Fit after  self-cal, rms=0.039882Jy  sigma=0.769115
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.821 mas, bmaj=4.132 mas, bpa=7.651 degrees
! Estimated noise=0.276146 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-30.9, 54.9).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00281548 Jy
! Component: 100  -  total flux cleaned = 0.00340338 Jy
! Component: 150  -  total flux cleaned = 0.00363725 Jy
! Component: 200  -  total flux cleaned = 0.00374247 Jy
! Total flux subtracted in 200 components = 0.00374247 Jy
! Clean residual min=-0.002329 max=0.001940 Jy/beam
! Clean residual mean=-0.000001 rms=0.000497 Jy/beam
! Combined flux in latest and established models = 0.171595 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 51 components and 0.171595 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.039463Jy  sigma=0.765359
! Fit after  self-cal, rms=0.039442Jy  sigma=0.764865
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.039442Jy  sigma=0.764865
! Fit after  self-cal, rms=0.039614Jy  sigma=0.763033
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.819 mas, bmaj=4.128 mas, bpa=7.706 degrees
! Estimated noise=0.278835 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00197941 Jy
! Component: 100  -  total flux cleaned = 0.0024249 Jy
! Component: 150  -  total flux cleaned = 0.00265848 Jy
! Component: 200  -  total flux cleaned = 0.00273827 Jy
! Total flux subtracted in 200 components = 0.00273827 Jy
! Clean residual min=-0.002411 max=0.002080 Jy/beam
! Clean residual mean=-0.000001 rms=0.000504 Jy/beam
! Combined flux in latest and established models = 0.174334 Jy
selfcal
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 69 components and 0.174334 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.039364Jy  sigma=0.761870
! Fit after  self-cal, rms=0.039359Jy  sigma=0.761772
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000141163 Jy
! Component: 100  -  total flux cleaned = 0.000140617 Jy
! Component: 150  -  total flux cleaned = 0.000140557 Jy
! Component: 200  -  total flux cleaned = 0.000140619 Jy
! Total flux subtracted in 200 components = 0.000140619 Jy
! Clean residual min=-0.002402 max=0.002072 Jy/beam
! Clean residual mean=-0.000000 rms=0.000500 Jy/beam
! Combined flux in latest and established models = 0.174474 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 79 components and 0.174474 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.039300Jy  sigma=0.761669
! Fit after  self-cal, rms=0.039299Jy  sigma=0.761628
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.039299Jy  sigma=0.761628
! Fit after  self-cal, rms=0.039489Jy  sigma=0.760155
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.818 mas, bmaj=4.125 mas, bpa=7.789 degrees
! Estimated noise=0.281552 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0015812 Jy
! Component: 100  -  total flux cleaned = 0.00186826 Jy
! Component: 150  -  total flux cleaned = 0.00200277 Jy
! Component: 200  -  total flux cleaned = 0.0020753 Jy
! Total flux subtracted in 200 components = 0.0020753 Jy
! Clean residual min=-0.002497 max=0.002127 Jy/beam
! Clean residual mean=-0.000000 rms=0.000514 Jy/beam
! Combined flux in latest and established models = 0.17655 Jy
selfcal
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 81 components and 0.17655 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.039316Jy  sigma=0.759801
! Fit after  self-cal, rms=0.039315Jy  sigma=0.759766
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.72035e-05 Jy
! Component: 100  -  total flux cleaned = 5.41596e-06 Jy
! Component: 150  -  total flux cleaned = 2.00043e-05 Jy
! Component: 200  -  total flux cleaned = 2.02099e-05 Jy
! Total flux subtracted in 200 components = 2.02099e-05 Jy
! Clean residual min=-0.002499 max=0.002122 Jy/beam
! Clean residual mean=-0.000000 rms=0.000512 Jy/beam
! Combined flux in latest and established models = 0.17657 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 93 components and 0.17657 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.039283Jy  sigma=0.759727
! Fit after  self-cal, rms=0.039283Jy  sigma=0.759707
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.039283Jy  sigma=0.759707
! Fit after  self-cal, rms=0.039467Jy  sigma=0.758637
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.673 mas, bmaj=5.565 mas, bpa=-2.892 degrees
! Estimated noise=0.339997 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00119111 Jy
! Component: 100  -  total flux cleaned = 0.00168257 Jy
! Component: 150  -  total flux cleaned = 0.00179148 Jy
! Component: 200  -  total flux cleaned = 0.001803 Jy
! Total flux subtracted in 200 components = 0.001803 Jy
! Clean residual min=-0.002427 max=0.001866 Jy/beam
! Clean residual mean=0.000001 rms=0.000563 Jy/beam
! Combined flux in latest and established models = 0.178373 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 102 components and 0.178373 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.039357Jy  sigma=0.758466
! Fit after  self-cal, rms=0.039357Jy  sigma=0.758453
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.92317e-06 Jy
! Component: 100  -  total flux cleaned = 2.69696e-05 Jy
! Component: 150  -  total flux cleaned = 4.39173e-05 Jy
! Component: 200  -  total flux cleaned = 5.20013e-05 Jy
! Total flux subtracted in 200 components = 5.20013e-05 Jy
! Clean residual min=-0.002437 max=0.001846 Jy/beam
! Clean residual mean=0.000001 rms=0.000561 Jy/beam
! Combined flux in latest and established models = 0.178425 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 107 components and 0.178425 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.039337Jy  sigma=0.758533
! Fit after  self-cal, rms=0.039336Jy  sigma=0.758529
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.817 mas, bmaj=4.122 mas, bpa=7.867 degrees
! Estimated noise=0.284085 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.817 x 4.122 at 7.867 degrees (North through East)
! Clean map  min=-0.0024288  max=0.16116 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.44 mas, bmaj=3.484 mas, bpa=9.497 degrees
! Estimated noise=0.481696 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.125841 Jy
! Component: 100  -  total flux cleaned = 0.155415 Jy
! Component: 150  -  total flux cleaned = 0.166859 Jy
! Component: 200  -  total flux cleaned = 0.172384 Jy
! Total flux subtracted in 200 components = 0.172384 Jy
! Clean residual min=-0.003041 max=0.003403 Jy/beam
! Clean residual mean=-0.000001 rms=0.000917 Jy/beam
! Combined flux in latest and established models = 0.172384 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 27 model components to the UV plane model.
! The established model now contains 27 components and 0.172384 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.817 mas, bmaj=4.122 mas, bpa=7.867 degrees
! Estimated noise=0.284085 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (30.9, -54.9).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00338985 Jy
! Component: 100  -  total flux cleaned = 0.00440865 Jy
! Component: 150  -  total flux cleaned = 0.00510286 Jy
! Component: 200  -  total flux cleaned = 0.00537876 Jy
! Total flux subtracted in 200 components = 0.00537876 Jy
! Clean residual min=-0.002580 max=0.002247 Jy/beam
! Clean residual mean=0.000000 rms=0.000530 Jy/beam
! Combined flux in latest and established models = 0.177762 Jy
! Adding 32 model components to the UV plane model.
! The established model now contains 48 components and 0.177762 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.673 mas, bmaj=5.565 mas, bpa=-2.892 degrees
! Estimated noise=0.339997 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000443193 Jy
! Component: 100  -  total flux cleaned = 0.000445617 Jy
! Component: 150  -  total flux cleaned = 0.000516953 Jy
! Component: 200  -  total flux cleaned = 0.000559907 Jy
! Total flux subtracted in 200 components = 0.000559907 Jy
! Clean residual min=-0.002424 max=0.001791 Jy/beam
! Clean residual mean=0.000001 rms=0.000554 Jy/beam
! Combined flux in latest and established models = 0.178322 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.02117e-05 Jy
! Component: 100  -  total flux cleaned = 7.79364e-05 Jy
! Component: 150  -  total flux cleaned = 0.000129099 Jy
! Component: 200  -  total flux cleaned = 0.000128681 Jy
! Total flux subtracted in 200 components = 0.000128681 Jy
! Clean residual min=-0.002376 max=0.001785 Jy/beam
! Clean residual mean=0.000001 rms=0.000550 Jy/beam
! Combined flux in latest and established models = 0.178451 Jy
! Adding 41 model components to the UV plane model.
! The established model now contains 82 components and 0.178451 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.817 mas, bmaj=4.122 mas, bpa=7.867 degrees
! Estimated noise=0.284085 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.3628e-05 Jy
! Component: 100  -  total flux cleaned = 4.49096e-05 Jy
! Component: 150  -  total flux cleaned = 0.000136181 Jy
! Component: 200  -  total flux cleaned = 0.000198966 Jy
! Total flux subtracted in 200 components = 0.000198966 Jy
! Clean residual min=-0.002412 max=0.002125 Jy/beam
! Clean residual mean=0.000000 rms=0.000512 Jy/beam
! Combined flux in latest and established models = 0.17865 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 97 components and 0.17865 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.039213Jy  sigma=0.758092
! Fit after  self-cal, rms=0.039205Jy  sigma=0.757886
wmodel /scr/pima/bp192a1_uvs/J0632+1554_C_map.mod
! Writing 97 model components to file: /scr/pima/bp192a1_uvs/J0632+1554_C_map.mod
wobs /scr/pima/bp192a1_uvs/J0632+1554_C_uvs.fits
! Writing UV FITS file: /scr/pima/bp192a1_uvs/J0632+1554_C_uvs.fits
wwins /scr/pima/bp192a1_uvs/J0632+1554_C_map.win
! wwins: Wrote 3 windows to /scr/pima/bp192a1_uvs/J0632+1554_C_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000690609 Jy
! Component: 100  -  total flux cleaned = -0.00103262 Jy
! Component: 150  -  total flux cleaned = -0.00124053 Jy
! Component: 200  -  total flux cleaned = -0.00127372 Jy
! Component: 250  -  total flux cleaned = -0.00111719 Jy
! Component: 300  -  total flux cleaned = -0.000996427 Jy
! Component: 350  -  total flux cleaned = -0.00087948 Jy
! Component: 400  -  total flux cleaned = -0.000822254 Jy
! Component: 450  -  total flux cleaned = -0.000767092 Jy
! Component: 500  -  total flux cleaned = -0.000713492 Jy
! Component: 550  -  total flux cleaned = -0.000661584 Jy
! Component: 600  -  total flux cleaned = -0.000687443 Jy
! Component: 650  -  total flux cleaned = -0.000712668 Jy
! Component: 700  -  total flux cleaned = -0.000786451 Jy
! Component: 750  -  total flux cleaned = -0.000786284 Jy
! Component: 800  -  total flux cleaned = -0.000810099 Jy
! Component: 850  -  total flux cleaned = -0.000786739 Jy
! Component: 900  -  total flux cleaned = -0.000809576 Jy
! Component: 950  -  total flux cleaned = -0.000786666 Jy
! Component: 1000  -  total flux cleaned = -0.000764608 Jy
! Component: 1050  -  total flux cleaned = -0.000809146 Jy
! Component: 1100  -  total flux cleaned = -0.000831046 Jy
! Component: 1150  -  total flux cleaned = -0.000873768 Jy
! Component: 1200  -  total flux cleaned = -0.000894748 Jy
! Component: 1250  -  total flux cleaned = -0.000915614 Jy
! Component: 1300  -  total flux cleaned = -0.000894961 Jy
! Component: 1350  -  total flux cleaned = -0.000895119 Jy
! Component: 1400  -  total flux cleaned = -0.00089522 Jy
! Component: 1450  -  total flux cleaned = -0.0008755 Jy
! Component: 1500  -  total flux cleaned = -0.000855846 Jy
! Component: 1550  -  total flux cleaned = -0.000817168 Jy
! Component: 1600  -  total flux cleaned = -0.000778777 Jy
! Component: 1650  -  total flux cleaned = -0.000703033 Jy
! Component: 1700  -  total flux cleaned = -0.000665797 Jy
! Component: 1750  -  total flux cleaned = -0.000666053 Jy
! Component: 1800  -  total flux cleaned = -0.000684619 Jy
! Component: 1850  -  total flux cleaned = -0.000739204 Jy
! Component: 1900  -  total flux cleaned = -0.000684856 Jy
! Component: 1950  -  total flux cleaned = -0.000720776 Jy
! Component: 2000  -  total flux cleaned = -0.000702931 Jy
! Component: 2050  -  total flux cleaned = -0.000702996 Jy
! Component: 2100  -  total flux cleaned = -0.000703027 Jy
! Component: 2150  -  total flux cleaned = -0.00068572 Jy
! Component: 2200  -  total flux cleaned = -0.000668474 Jy
! Component: 2250  -  total flux cleaned = -0.00060028 Jy
! Component: 2300  -  total flux cleaned = -0.000583579 Jy
! Component: 2350  -  total flux cleaned = -0.000550128 Jy
! Component: 2400  -  total flux cleaned = -0.000550124 Jy
! Component: 2450  -  total flux cleaned = -0.000484359 Jy
! Component: 2500  -  total flux cleaned = -0.000435405 Jy
! Component: 2550  -  total flux cleaned = -0.00040293 Jy
! Component: 2600  -  total flux cleaned = -0.000338602 Jy
! Component: 2650  -  total flux cleaned = -0.000258773 Jy
! Component: 2700  -  total flux cleaned = -0.00019554 Jy
! Component: 2750  -  total flux cleaned = -0.000164059 Jy
! Component: 2800  -  total flux cleaned = -0.000132873 Jy
! Component: 2850  -  total flux cleaned = -0.000101914 Jy
! Component: 2900  -  total flux cleaned = -0.000101996 Jy
! Component: 2950  -  total flux cleaned = -1.03312e-05 Jy
! Component: 3000  -  total flux cleaned = 1.97151e-05 Jy
! Component: 3050  -  total flux cleaned = 1.97845e-05 Jy
! Component: 3100  -  total flux cleaned = -1.00666e-05 Jy
! Component: 3150  -  total flux cleaned = 3.45947e-05 Jy
! Component: 3200  -  total flux cleaned = 7.88532e-05 Jy
! Component: 3250  -  total flux cleaned = 7.87876e-05 Jy
! Component: 3300  -  total flux cleaned = 0.000122584 Jy
! Component: 3350  -  total flux cleaned = 0.000151574 Jy
! Component: 3400  -  total flux cleaned = 0.000209124 Jy
! Component: 3450  -  total flux cleaned = 0.00022338 Jy
! Component: 3500  -  total flux cleaned = 0.000265922 Jy
! Component: 3550  -  total flux cleaned = 0.000336562 Jy
! Component: 3600  -  total flux cleaned = 0.000322357 Jy
! Component: 3650  -  total flux cleaned = 0.000364324 Jy
! Component: 3700  -  total flux cleaned = 0.000405998 Jy
! Component: 3750  -  total flux cleaned = 0.000405975 Jy
! Component: 3800  -  total flux cleaned = 0.000461098 Jy
! Component: 3850  -  total flux cleaned = 0.000529517 Jy
! Component: 3900  -  total flux cleaned = 0.000556796 Jy
! Component: 3950  -  total flux cleaned = 0.00058387 Jy
! Component: 4000  -  total flux cleaned = 0.000610735 Jy
! Component: 4050  -  total flux cleaned = 0.000610738 Jy
! Total flux subtracted in 4096 components = 0.000677429 Jy
! Clean residual min=-0.000727 max=0.000706 Jy/beam
! Clean residual mean=0.000001 rms=0.000253 Jy/beam
! Combined flux in latest and established models = 0.179327 Jy
keep
! Adding 316 model components to the UV plane model.
! The established model now contains 413 components and 0.179327 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bp192a1_uvs/J0632+1554_C\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.817 x 4.122 at 7.867 degrees (North through East)
! Clean map  min=-0.0016437  max=0.16109 Jy/beam
! Writing clean map to FITS file: /scr/pima/bp192a1_uvs/J0632+1554_C_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.161094 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000249906 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.465392 0.465392 0.930783 1.86157 3.72313 7.44626 14.8925 29.7851 59.5701
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0007 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.161 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  644.618 
quit
! Quitting program
! Log file /scr/pima/bp192a1_uvs/J0632+1554_C_uvs.log closed on Wed Sep 16 13:33:39 2015