! Started logfile: /scr/pima/bp192a1_uvs/J0604+2415_C_uvs.log on Wed Sep 16 13:33:29 2015 obs /scr/pima/bp192a1_uvs/J0604+2415_C_uva.fits ! Reading UV FITS file: /scr/pima/bp192a1_uvs/J0604+2415_C_uva.fits ! AN table 1: 28 integrations on 45 of 45 possible baselines. ! Apparent sampling: 1 visibilities/baseline/integration-bin. ! Found source: J0604+2415 ! ! There are 8 IFs, and a total of 8 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 4.128e+09 3.2e+07 1 3.2e+07 ! 02 2 4.16e+09 3.2e+07 1 3.2e+07 ! 03 3 4.192e+09 3.2e+07 1 3.2e+07 ! 04 4 4.224e+09 3.2e+07 1 3.2e+07 ! 05 5 4.416e+09 3.2e+07 1 3.2e+07 ! 06 6 4.512e+09 3.2e+07 1 3.2e+07 ! 07 7 4.544e+09 3.2e+07 1 3.2e+07 ! 08 8 4.576e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 10080 visibilities. select RR ! Selecting polarization: RR, channels: 1..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.3 print "taper_size =", taper_size ! taper_size = 40 ![@/home/lpetrov/bin/01_muppet /scr/pima/bp192a1_uvs/J0604+2415_C] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=1.005774Jy sigma=25.215830 ! Fit after self-cal, rms=0.885478Jy sigma=22.301612 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.409 mas, bmaj=3.919 mas, bpa=15.28 degrees ! Estimated noise=0.492058 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0830933 Jy ! Component: 100 - total flux cleaned = 0.110175 Jy ! Total flux subtracted in 100 components = 0.110175 Jy ! Clean residual min=-0.004821 max=0.010971 Jy/beam ! Clean residual mean=0.000006 rms=0.001369 Jy/beam ! Combined flux in latest and established models = 0.110175 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.110175 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.041173Jy sigma=0.891123 ! Fit after self-cal, rms=0.041153Jy sigma=0.890253 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0113007 Jy ! Component: 100 - total flux cleaned = 0.0168344 Jy ! Total flux subtracted in 100 components = 0.0168344 Jy ! Clean residual min=-0.003688 max=0.004294 Jy/beam ! Clean residual mean=-0.000001 rms=0.000986 Jy/beam ! Combined flux in latest and established models = 0.127009 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 17 components and 0.127009 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.036667Jy sigma=0.789454 ! Fit after self-cal, rms=0.036644Jy sigma=0.788971 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.783 mas, bmaj=4.164 mas, bpa=14.3 degrees ! Estimated noise=0.285325 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00511368 Jy ! Component: 100 - total flux cleaned = 0.00808958 Jy ! Component: 150 - total flux cleaned = 0.0100124 Jy ! Component: 200 - total flux cleaned = 0.0112811 Jy ! Total flux subtracted in 200 components = 0.0112811 Jy ! Clean residual min=-0.003737 max=0.003775 Jy/beam ! Clean residual mean=-0.000006 rms=0.000879 Jy/beam ! Combined flux in latest and established models = 0.13829 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 33 components and 0.13829 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.035629Jy sigma=0.773799 ! Fit after self-cal, rms=0.035616Jy sigma=0.773482 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.783 x 4.164 at 14.3 degrees (North through East) ! Clean map min=-0.0036655 max=0.11028 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.15 HN 0.97 KP 0.86 ! LA 1.04 MK 1.06 NL 1.01 OV 0.95 ! PT 0.86 SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.15 HN 1.01 KP 0.90 ! LA 1.06 MK 0.97 NL 1.07 OV 0.99 ! PT 0.93 SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.98 HN 0.99 KP 0.87 ! LA 1.02 MK 1.01 NL 1.07 OV 0.96 ! PT 0.94 SC 0.96 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.02 HN 1.03 KP 0.95 ! LA 1.10 MK 1.02 NL 1.14 OV 0.93 ! PT 0.91 SC 1.03 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.03 HN 1.06 KP 0.93 ! LA 1.19 MK 1.02 NL 1.09 OV 0.98 ! PT 1.04 SC 1.06 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.94 HN 0.99 KP 0.93 ! LA 1.10 MK 0.99 NL 1.08 OV 0.98 ! PT 0.97 SC 0.96 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.98 HN 1.03 KP 0.95 ! LA 1.12 MK 1.03 NL 1.03 OV 1.01 ! PT 0.93 SC 1.01 ! ! ! Fit before self-cal, rms=0.035616Jy sigma=0.773482 ! Fit after self-cal, rms=0.033995Jy sigma=0.720548 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.783 mas, bmaj=4.182 mas, bpa=14.41 degrees ! Estimated noise=0.288641 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00146112 Jy ! Component: 100 - total flux cleaned = 0.0017193 Jy ! Component: 150 - total flux cleaned = 0.00171708 Jy ! Component: 200 - total flux cleaned = 0.0017159 Jy ! Total flux subtracted in 200 components = 0.0017159 Jy ! Clean residual min=-0.001681 max=0.001867 Jy/beam ! Clean residual mean=-0.000002 rms=0.000399 Jy/beam ! Combined flux in latest and established models = 0.140006 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 46 components and 0.140006 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.033862Jy sigma=0.719663 ! Fit after self-cal, rms=0.033856Jy sigma=0.719464 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.033856Jy sigma=0.719464 ! Fit after self-cal, rms=0.034087Jy sigma=0.718542 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.782 mas, bmaj=4.181 mas, bpa=14.49 degrees ! Estimated noise=0.291781 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00130394 Jy ! Component: 100 - total flux cleaned = 0.00159234 Jy ! Component: 150 - total flux cleaned = 0.00161197 Jy ! Component: 200 - total flux cleaned = 0.00161295 Jy ! Total flux subtracted in 200 components = 0.00161295 Jy ! Clean residual min=-0.001705 max=0.001825 Jy/beam ! Clean residual mean=-0.000002 rms=0.000398 Jy/beam ! Combined flux in latest and established models = 0.141619 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 51 components and 0.141619 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.033977Jy sigma=0.717996 ! Fit after self-cal, rms=0.033974Jy sigma=0.717948 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (61.8, 42.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00147405 Jy ! Component: 100 - total flux cleaned = 0.00165443 Jy ! Component: 150 - total flux cleaned = 0.00180371 Jy ! Component: 200 - total flux cleaned = 0.00195542 Jy ! Total flux subtracted in 200 components = 0.00195542 Jy ! Clean residual min=-0.001728 max=0.001685 Jy/beam ! Clean residual mean=-0.000002 rms=0.000381 Jy/beam ! Combined flux in latest and established models = 0.143575 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 64 components and 0.143575 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.033848Jy sigma=0.716680 ! Fit after self-cal, rms=0.033846Jy sigma=0.716545 ! Inverting map ! Added new window around map position (34.2, 34.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00120204 Jy ! Component: 100 - total flux cleaned = 0.00140334 Jy ! Component: 150 - total flux cleaned = 0.00156457 Jy ! Component: 200 - total flux cleaned = 0.00163388 Jy ! Total flux subtracted in 200 components = 0.00163388 Jy ! Clean residual min=-0.001557 max=0.001624 Jy/beam ! Clean residual mean=-0.000002 rms=0.000357 Jy/beam ! Combined flux in latest and established models = 0.145209 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 82 components and 0.145209 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.033732Jy sigma=0.715031 ! Fit after self-cal, rms=0.033725Jy sigma=0.714870 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.033725Jy sigma=0.714870 ! Fit after self-cal, rms=0.033936Jy sigma=0.713766 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.781 mas, bmaj=4.179 mas, bpa=14.56 degrees ! Estimated noise=0.294645 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00118816 Jy ! Component: 100 - total flux cleaned = 0.00183685 Jy ! Component: 150 - total flux cleaned = 0.00209868 Jy ! Component: 200 - total flux cleaned = 0.00230729 Jy ! Total flux subtracted in 200 components = 0.00230729 Jy ! Clean residual min=-0.001610 max=0.001572 Jy/beam ! Clean residual mean=-0.000002 rms=0.000367 Jy/beam ! Combined flux in latest and established models = 0.147516 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 94 components and 0.147516 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.033822Jy sigma=0.713189 ! Fit after self-cal, rms=0.033821Jy sigma=0.713140 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000288746 Jy ! Component: 100 - total flux cleaned = 0.000458111 Jy ! Component: 150 - total flux cleaned = 0.000612672 Jy ! Component: 200 - total flux cleaned = 0.000692172 Jy ! Total flux subtracted in 200 components = 0.000692172 Jy ! Clean residual min=-0.001635 max=0.001545 Jy/beam ! Clean residual mean=-0.000002 rms=0.000362 Jy/beam ! Combined flux in latest and established models = 0.148208 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 105 components and 0.148208 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.033785Jy sigma=0.712939 ! Fit after self-cal, rms=0.033784Jy sigma=0.712920 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.033784Jy sigma=0.712920 ! Fit after self-cal, rms=0.033961Jy sigma=0.712401 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.633 mas, bmaj=5.353 mas, bpa=3.945 degrees ! Estimated noise=0.354966 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00112373 Jy ! Component: 100 - total flux cleaned = 0.00169788 Jy ! Component: 150 - total flux cleaned = 0.00185297 Jy ! Component: 200 - total flux cleaned = 0.0019726 Jy ! Total flux subtracted in 200 components = 0.0019726 Jy ! Clean residual min=-0.001841 max=0.001677 Jy/beam ! Clean residual mean=-0.000002 rms=0.000401 Jy/beam ! Combined flux in latest and established models = 0.150181 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 118 components and 0.150181 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.033901Jy sigma=0.712199 ! Fit after self-cal, rms=0.033898Jy sigma=0.712126 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000164852 Jy ! Component: 100 - total flux cleaned = 0.000278401 Jy ! Component: 150 - total flux cleaned = 0.00034077 Jy ! Component: 200 - total flux cleaned = 0.000386533 Jy ! Total flux subtracted in 200 components = 0.000386533 Jy ! Clean residual min=-0.001828 max=0.001681 Jy/beam ! Clean residual mean=-0.000002 rms=0.000397 Jy/beam ! Combined flux in latest and established models = 0.150567 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 127 components and 0.150567 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.033883Jy sigma=0.712123 ! Fit after self-cal, rms=0.033881Jy sigma=0.712096 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=1.78 mas, bmaj=4.178 mas, bpa=14.62 degrees ! Estimated noise=0.296819 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.78 x 4.178 at 14.62 degrees (North through East) ! Clean map min=-0.0016541 max=0.11418 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.405 mas, bmaj=3.935 mas, bpa=15.58 degrees ! Estimated noise=0.513585 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0868488 Jy ! Component: 100 - total flux cleaned = 0.115632 Jy ! Component: 150 - total flux cleaned = 0.127732 Jy ! Component: 200 - total flux cleaned = 0.133685 Jy ! Total flux subtracted in 200 components = 0.133685 Jy ! Clean residual min=-0.003034 max=0.003259 Jy/beam ! Clean residual mean=0.000002 rms=0.000762 Jy/beam ! Combined flux in latest and established models = 0.133685 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 0.133685 Jy ! Inverting map and beam ! Estimated beam: bmin=1.78 mas, bmaj=4.178 mas, bpa=14.62 degrees ! Estimated noise=0.296819 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00491934 Jy ! Component: 100 - total flux cleaned = 0.00802611 Jy ! Component: 150 - total flux cleaned = 0.0102799 Jy ! Component: 200 - total flux cleaned = 0.0117839 Jy ! Total flux subtracted in 200 components = 0.0117839 Jy ! Clean residual min=-0.001951 max=0.001877 Jy/beam ! Clean residual mean=-0.000002 rms=0.000428 Jy/beam ! Combined flux in latest and established models = 0.145469 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 45 components and 0.145469 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.633 mas, bmaj=5.353 mas, bpa=3.945 degrees ! Estimated noise=0.354966 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00174 Jy ! Component: 100 - total flux cleaned = 0.00249793 Jy ! Component: 150 - total flux cleaned = 0.00304804 Jy ! Component: 200 - total flux cleaned = 0.00348613 Jy ! Total flux subtracted in 200 components = 0.00348613 Jy ! Clean residual min=-0.001820 max=0.001632 Jy/beam ! Clean residual mean=-0.000002 rms=0.000416 Jy/beam ! Combined flux in latest and established models = 0.148955 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000295922 Jy ! Component: 100 - total flux cleaned = 0.000416967 Jy ! Component: 150 - total flux cleaned = 0.000591239 Jy ! Component: 200 - total flux cleaned = 0.000689299 Jy ! Total flux subtracted in 200 components = 0.000689299 Jy ! Clean residual min=-0.001827 max=0.001674 Jy/beam ! Clean residual mean=-0.000002 rms=0.000405 Jy/beam ! Combined flux in latest and established models = 0.149644 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 76 components and 0.149644 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.78 mas, bmaj=4.178 mas, bpa=14.62 degrees ! Estimated noise=0.296819 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00013973 Jy ! Component: 100 - total flux cleaned = -3.36125e-06 Jy ! Component: 150 - total flux cleaned = 0.00011859 Jy ! Component: 200 - total flux cleaned = 0.000309125 Jy ! Total flux subtracted in 200 components = 0.000309125 Jy ! Clean residual min=-0.001728 max=0.001608 Jy/beam ! Clean residual mean=-0.000002 rms=0.000380 Jy/beam ! Combined flux in latest and established models = 0.149953 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 95 components and 0.149953 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.033941Jy sigma=0.713475 ! Fit after self-cal, rms=0.033926Jy sigma=0.713242 wmodel /scr/pima/bp192a1_uvs/J0604+2415_C_map.mod ! Writing 95 model components to file: /scr/pima/bp192a1_uvs/J0604+2415_C_map.mod wobs /scr/pima/bp192a1_uvs/J0604+2415_C_uvs.fits ! Writing UV FITS file: /scr/pima/bp192a1_uvs/J0604+2415_C_uvs.fits wwins /scr/pima/bp192a1_uvs/J0604+2415_C_map.win ! wwins: Wrote 3 windows to /scr/pima/bp192a1_uvs/J0604+2415_C_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000293391 Jy ! Component: 100 - total flux cleaned = -0.000460989 Jy ! Component: 150 - total flux cleaned = -0.000512824 Jy ! Component: 200 - total flux cleaned = -0.000586345 Jy ! Component: 250 - total flux cleaned = -0.000633805 Jy ! Component: 300 - total flux cleaned = -0.000724121 Jy ! Component: 350 - total flux cleaned = -0.000767784 Jy ! Component: 400 - total flux cleaned = -0.000831766 Jy ! Component: 450 - total flux cleaned = -0.000894375 Jy ! Component: 500 - total flux cleaned = -0.000915174 Jy ! Component: 550 - total flux cleaned = -0.000915268 Jy ! Component: 600 - total flux cleaned = -0.000837997 Jy ! Component: 650 - total flux cleaned = -0.000838368 Jy ! Component: 700 - total flux cleaned = -0.000782461 Jy ! Component: 750 - total flux cleaned = -0.000745878 Jy ! Component: 800 - total flux cleaned = -0.000691855 Jy ! Component: 850 - total flux cleaned = -0.000638565 Jy ! Component: 900 - total flux cleaned = -0.000603552 Jy ! Component: 950 - total flux cleaned = -0.000552037 Jy ! Component: 1000 - total flux cleaned = -0.000551952 Jy ! Component: 1050 - total flux cleaned = -0.00048514 Jy ! Component: 1100 - total flux cleaned = -0.000452587 Jy ! Component: 1150 - total flux cleaned = -0.000436492 Jy ! Component: 1200 - total flux cleaned = -0.000420474 Jy ! Component: 1250 - total flux cleaned = -0.000341946 Jy ! Component: 1300 - total flux cleaned = -0.000373049 Jy ! Component: 1350 - total flux cleaned = -0.000311515 Jy ! Component: 1400 - total flux cleaned = -0.000266117 Jy ! Component: 1450 - total flux cleaned = -0.000191405 Jy ! Component: 1500 - total flux cleaned = -0.000117519 Jy ! Component: 1550 - total flux cleaned = -5.92587e-05 Jy ! Component: 1600 - total flux cleaned = -3.02721e-05 Jy ! Component: 1650 - total flux cleaned = 6.99036e-05 Jy ! Component: 1700 - total flux cleaned = 0.00012645 Jy ! Component: 1750 - total flux cleaned = 0.000210578 Jy ! Component: 1800 - total flux cleaned = 0.000279875 Jy ! Component: 1850 - total flux cleaned = 0.000348519 Jy ! Component: 1900 - total flux cleaned = 0.00044372 Jy ! Component: 1950 - total flux cleaned = 0.000524541 Jy ! Component: 2000 - total flux cleaned = 0.000604711 Jy ! Component: 2050 - total flux cleaned = 0.000657555 Jy ! Component: 2100 - total flux cleaned = 0.000749299 Jy ! Component: 2150 - total flux cleaned = 0.000814209 Jy ! Component: 2200 - total flux cleaned = 0.000865515 Jy ! Component: 2250 - total flux cleaned = 0.000942136 Jy ! Component: 2300 - total flux cleaned = 0.00100538 Jy ! Component: 2350 - total flux cleaned = 0.00106815 Jy ! Component: 2400 - total flux cleaned = 0.00114279 Jy ! Component: 2450 - total flux cleaned = 0.00122917 Jy ! Component: 2500 - total flux cleaned = 0.00127809 Jy ! Component: 2550 - total flux cleaned = 0.00135088 Jy ! Component: 2600 - total flux cleaned = 0.00143518 Jy ! Component: 2650 - total flux cleaned = 0.00148298 Jy ! Component: 2700 - total flux cleaned = 0.00156582 Jy ! Component: 2750 - total flux cleaned = 0.00161279 Jy ! Component: 2800 - total flux cleaned = 0.00165949 Jy ! Component: 2850 - total flux cleaned = 0.00172903 Jy ! Component: 2900 - total flux cleaned = 0.00180941 Jy ! Component: 2950 - total flux cleaned = 0.00186645 Jy ! Component: 3000 - total flux cleaned = 0.00191189 Jy ! Component: 3050 - total flux cleaned = 0.00200185 Jy ! Component: 3100 - total flux cleaned = 0.00202424 Jy ! Component: 3150 - total flux cleaned = 0.00212403 Jy ! Component: 3200 - total flux cleaned = 0.00214609 Jy ! Component: 3250 - total flux cleaned = 0.00221174 Jy ! Component: 3300 - total flux cleaned = 0.00224431 Jy ! Component: 3350 - total flux cleaned = 0.0022984 Jy ! Component: 3400 - total flux cleaned = 0.00231982 Jy ! Component: 3450 - total flux cleaned = 0.00238371 Jy ! Component: 3500 - total flux cleaned = 0.00242604 Jy ! Component: 3550 - total flux cleaned = 0.00248914 Jy ! Component: 3600 - total flux cleaned = 0.00251006 Jy ! Component: 3650 - total flux cleaned = 0.00254133 Jy ! Component: 3700 - total flux cleaned = 0.00258262 Jy ! Component: 3750 - total flux cleaned = 0.00260318 Jy ! Component: 3800 - total flux cleaned = 0.00263383 Jy ! Component: 3850 - total flux cleaned = 0.00265416 Jy ! Component: 3900 - total flux cleaned = 0.00267434 Jy ! Component: 3950 - total flux cleaned = 0.00270454 Jy ! Component: 4000 - total flux cleaned = 0.00273444 Jy ! Component: 4050 - total flux cleaned = 0.00275432 Jy ! Total flux subtracted in 4096 components = 0.00276419 Jy ! Clean residual min=-0.000512 max=0.000607 Jy/beam ! Clean residual mean=-0.000001 rms=0.000179 Jy/beam ! Combined flux in latest and established models = 0.152718 Jy keep ! Adding 287 model components to the UV plane model. ! The established model now contains 382 components and 0.152718 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/scr/pima/bp192a1_uvs/J0604+2415_C\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.78 x 4.178 at 14.62 degrees (North through East) ! Clean map min=-0.0011816 max=0.11462 Jy/beam ! Writing clean map to FITS file: /scr/pima/bp192a1_uvs/J0604+2415_C_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.114624 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000177585 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.464784 0.464784 0.929567 1.85913 3.71827 7.43654 14.8731 29.7461 59.4923 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.114 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 645.461 quit ! Quitting program ! Log file /scr/pima/bp192a1_uvs/J0604+2415_C_uvs.log closed on Wed Sep 16 13:33:34 2015