! Started logfile: /scr/pima/bp192a1_uvs/J0601+1759_X_uvs.log on Wed Sep 16 13:32:27 2015
obs /scr/pima/bp192a1_uvs/J0601+1759_X_uva.fits
! Reading UV FITS file: /scr/pima/bp192a1_uvs/J0601+1759_X_uva.fits
! AN table 1: 44 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.828283 visibilities/baseline/integration-bin.
! Found source: J0601+1759
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    7.392e+09      3.2e+07          1      3.2e+07
!  02        2    7.424e+09      3.2e+07          1      3.2e+07
!  03        3    7.456e+09      3.2e+07          1      3.2e+07
!  04        4    7.552e+09      3.2e+07          1      3.2e+07
!  05        5    7.744e+09      3.2e+07          1      3.2e+07
!  06        6    7.776e+09      3.2e+07          1      3.2e+07
!  07        7    7.808e+09      3.2e+07          1      3.2e+07
!  08        8     7.84e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 13120 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /scr/pima/bp192a1_uvs/J0601+1759_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 44 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 44 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 44 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 44 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 44 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 44 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 44 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 44 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.012215Jy  sigma=21.266519
! Fit after  self-cal, rms=0.860818Jy  sigma=18.153747
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8318 mas, bmaj=2.093 mas, bpa=9.631 degrees
! Estimated noise=0.513311 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.103267 Jy
! Component: 100  -  total flux cleaned = 0.127165 Jy
! Total flux subtracted in 100 components = 0.127165 Jy
! Clean residual min=-0.007664 max=0.011682 Jy/beam
! Clean residual mean=-0.000012 rms=0.001937 Jy/beam
! Combined flux in latest and established models = 0.127165 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.127165 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.047816Jy  sigma=0.928348
! Fit after  self-cal, rms=0.047815Jy  sigma=0.928188
! Inverting map 
! Added new window around map position (-1.2, 1.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0121851 Jy
! Component: 100  -  total flux cleaned = 0.020075 Jy
! Total flux subtracted in 100 components = 0.020075 Jy
! Clean residual min=-0.007020 max=0.006639 Jy/beam
! Clean residual mean=-0.000010 rms=0.001453 Jy/beam
! Combined flux in latest and established models = 0.14724 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 28 components and 0.14724 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.043048Jy  sigma=0.834413
! Fit after  self-cal, rms=0.042970Jy  sigma=0.833100
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.063 mas, bmaj=2.352 mas, bpa=7.786 degrees
! Estimated noise=0.298567 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00861126 Jy
! Component: 100  -  total flux cleaned = 0.0142934 Jy
! Component: 150  -  total flux cleaned = 0.0183968 Jy
! Component: 200  -  total flux cleaned = 0.0213984 Jy
! Total flux subtracted in 200 components = 0.0213984 Jy
! Clean residual min=-0.008284 max=0.006445 Jy/beam
! Clean residual mean=-0.000017 rms=0.001535 Jy/beam
! Combined flux in latest and established models = 0.168639 Jy
! Performing phase self-cal
! Adding 40 model components to the UV plane model.
! The established model now contains 61 components and 0.168639 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.040529Jy  sigma=0.793253
! Fit after  self-cal, rms=0.040465Jy  sigma=0.791829
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.063 x 2.352 at 7.786 degrees (North through East)
! Clean map  min=-0.0077259  max=0.13479 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.09     FD        0.91     HN        0.85     KP        1.10     
!   LA        0.97     MK        1.08     NL        1.09     OV        0.95     
!   PT        0.84     SC        0.97     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.89     FD        0.99     HN        0.91     KP        1.19     
!   LA        0.99     MK        1.08     NL        1.12     OV        0.98     
!   PT        0.87     SC        1.02     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.96     HN        0.97     KP        1.08     
!   LA        1.01     MK        1.13     NL        1.06     OV        0.97     
!   PT        0.87     SC        1.03     
! 
! 
! Correcting IF 5.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 6.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 7.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 8.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Fit before self-cal, rms=0.040465Jy  sigma=0.791829
! Fit after  self-cal, rms=0.038759Jy  sigma=0.760052
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.069 mas, bmaj=2.358 mas, bpa=7.985 degrees
! Estimated noise=0.297632 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00198305 Jy
! Component: 100  -  total flux cleaned = 0.00310628 Jy
! Component: 150  -  total flux cleaned = 0.00351067 Jy
! Component: 200  -  total flux cleaned = 0.0038285 Jy
! Total flux subtracted in 200 components = 0.0038285 Jy
! Clean residual min=-0.005719 max=0.004326 Jy/beam
! Clean residual mean=-0.000009 rms=0.001088 Jy/beam
! Combined flux in latest and established models = 0.172467 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 66 components and 0.172467 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.038591Jy  sigma=0.757938
! Fit after  self-cal, rms=0.038584Jy  sigma=0.757658
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.038584Jy  sigma=0.757658
! Fit after  self-cal, rms=0.037931Jy  sigma=0.746713
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.069 mas, bmaj=2.358 mas, bpa=8.015 degrees
! Estimated noise=0.297807 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000672279 Jy
! Component: 100  -  total flux cleaned = 0.000993623 Jy
! Component: 150  -  total flux cleaned = 0.00119164 Jy
! Component: 200  -  total flux cleaned = 0.00132032 Jy
! Total flux subtracted in 200 components = 0.00132032 Jy
! Clean residual min=-0.004567 max=0.003609 Jy/beam
! Clean residual mean=-0.000007 rms=0.000889 Jy/beam
! Combined flux in latest and established models = 0.173787 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 70 components and 0.173787 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.037882Jy  sigma=0.745774
! Fit after  self-cal, rms=0.037877Jy  sigma=0.745664
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000248459 Jy
! Component: 100  -  total flux cleaned = 0.00032107 Jy
! Component: 150  -  total flux cleaned = 0.000344528 Jy
! Component: 200  -  total flux cleaned = 0.000388649 Jy
! Total flux subtracted in 200 components = 0.000388649 Jy
! Clean residual min=-0.004456 max=0.003583 Jy/beam
! Clean residual mean=-0.000007 rms=0.000883 Jy/beam
! Combined flux in latest and established models = 0.174176 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 73 components and 0.174176 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.037850Jy  sigma=0.745076
! Fit after  self-cal, rms=0.037849Jy  sigma=0.745048
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.037849Jy  sigma=0.745048
! Fit after  self-cal, rms=0.037821Jy  sigma=0.744928
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.069 mas, bmaj=2.355 mas, bpa=8.038 degrees
! Estimated noise=0.297644 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000388373 Jy
! Component: 100  -  total flux cleaned = 0.000576223 Jy
! Component: 150  -  total flux cleaned = 0.000619207 Jy
! Component: 200  -  total flux cleaned = 0.000661222 Jy
! Total flux subtracted in 200 components = 0.000661222 Jy
! Clean residual min=-0.004462 max=0.003600 Jy/beam
! Clean residual mean=-0.000007 rms=0.000886 Jy/beam
! Combined flux in latest and established models = 0.174837 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 73 components and 0.174837 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.037794Jy  sigma=0.744404
! Fit after  self-cal, rms=0.037793Jy  sigma=0.744378
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00016819 Jy
! Component: 100  -  total flux cleaned = 0.000187313 Jy
! Component: 150  -  total flux cleaned = 0.000205858 Jy
! Component: 200  -  total flux cleaned = 0.000224181 Jy
! Total flux subtracted in 200 components = 0.000224181 Jy
! Clean residual min=-0.004398 max=0.003579 Jy/beam
! Clean residual mean=-0.000007 rms=0.000883 Jy/beam
! Combined flux in latest and established models = 0.175061 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 75 components and 0.175062 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.037775Jy  sigma=0.743998
! Fit after  self-cal, rms=0.037774Jy  sigma=0.743982
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.037774Jy  sigma=0.743982
! Fit after  self-cal, rms=0.037192Jy  sigma=0.731957
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.22 mas, bmaj=3.075 mas, bpa=-1.216 degrees
! Estimated noise=0.352816 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000505424 Jy
! Component: 100  -  total flux cleaned = 0.000420666 Jy
! Component: 150  -  total flux cleaned = 0.000371258 Jy
! Component: 200  -  total flux cleaned = 0.000342633 Jy
! Total flux subtracted in 200 components = 0.000342633 Jy
! Clean residual min=-0.004700 max=0.003979 Jy/beam
! Clean residual mean=-0.000013 rms=0.001185 Jy/beam
! Combined flux in latest and established models = 0.175404 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 86 components and 0.175404 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.037183Jy  sigma=0.732078
! Fit after  self-cal, rms=0.037179Jy  sigma=0.731943
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.84142e-05 Jy
! Component: 100  -  total flux cleaned = 5.55035e-05 Jy
! Component: 150  -  total flux cleaned = 3.41288e-05 Jy
! Component: 200  -  total flux cleaned = 5.10217e-06 Jy
! Total flux subtracted in 200 components = 5.10217e-06 Jy
! Clean residual min=-0.004669 max=0.004041 Jy/beam
! Clean residual mean=-0.000013 rms=0.001181 Jy/beam
! Combined flux in latest and established models = 0.175409 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 93 components and 0.175409 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.037186Jy  sigma=0.731994
! Fit after  self-cal, rms=0.037186Jy  sigma=0.731960
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.068 mas, bmaj=2.36 mas, bpa=8.035 degrees
! Estimated noise=0.298254 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.068 x 2.36 at 8.035 degrees (North through East)
! Clean map  min=-0.0037127  max=0.13154 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.836 mas, bmaj=2.092 mas, bpa=9.724 degrees
! Estimated noise=0.515072 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.103478 Jy
! Component: 100  -  total flux cleaned = 0.127942 Jy
! Component: 150  -  total flux cleaned = 0.139809 Jy
! Component: 200  -  total flux cleaned = 0.14739 Jy
! Total flux subtracted in 200 components = 0.14739 Jy
! Clean residual min=-0.004459 max=0.005046 Jy/beam
! Clean residual mean=-0.000006 rms=0.001112 Jy/beam
! Combined flux in latest and established models = 0.14739 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 24 model components to the UV plane model.
! The established model now contains 24 components and 0.14739 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.068 mas, bmaj=2.36 mas, bpa=8.035 degrees
! Estimated noise=0.298254 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-2, -0.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00824357 Jy
! Component: 100  -  total flux cleaned = 0.0137782 Jy
! Component: 150  -  total flux cleaned = 0.0177577 Jy
! Component: 200  -  total flux cleaned = 0.0206653 Jy
! Total flux subtracted in 200 components = 0.0206653 Jy
! Clean residual min=-0.004307 max=0.003168 Jy/beam
! Clean residual mean=-0.000010 rms=0.000874 Jy/beam
! Combined flux in latest and established models = 0.168055 Jy
! Adding 42 model components to the UV plane model.
! The established model now contains 64 components and 0.168055 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.22 mas, bmaj=3.075 mas, bpa=-1.216 degrees
! Estimated noise=0.352816 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.003394 Jy
! Component: 100  -  total flux cleaned = 0.00548228 Jy
! Component: 150  -  total flux cleaned = 0.00685745 Jy
! Component: 200  -  total flux cleaned = 0.00768542 Jy
! Total flux subtracted in 200 components = 0.00768542 Jy
! Clean residual min=-0.004811 max=0.003954 Jy/beam
! Clean residual mean=-0.000013 rms=0.001143 Jy/beam
! Combined flux in latest and established models = 0.175741 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000172834 Jy
! Component: 100  -  total flux cleaned = 0.000296187 Jy
! Component: 150  -  total flux cleaned = 0.000385155 Jy
! Component: 200  -  total flux cleaned = 0.000464932 Jy
! Total flux subtracted in 200 components = 0.000464932 Jy
! Clean residual min=-0.004836 max=0.003836 Jy/beam
! Clean residual mean=-0.000012 rms=0.001133 Jy/beam
! Combined flux in latest and established models = 0.176206 Jy
! Adding 41 model components to the UV plane model.
! The established model now contains 98 components and 0.176206 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.068 mas, bmaj=2.36 mas, bpa=8.035 degrees
! Estimated noise=0.298254 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000493324 Jy
! Component: 100  -  total flux cleaned = -0.000535151 Jy
! Component: 150  -  total flux cleaned = -0.000574408 Jy
! Component: 200  -  total flux cleaned = -0.000639946 Jy
! Total flux subtracted in 200 components = -0.000639946 Jy
! Clean residual min=-0.003858 max=0.003059 Jy/beam
! Clean residual mean=-0.000006 rms=0.000771 Jy/beam
! Combined flux in latest and established models = 0.175566 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 115 components and 0.175566 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.037060Jy  sigma=0.729513
! Fit after  self-cal, rms=0.037043Jy  sigma=0.729194
wmodel /scr/pima/bp192a1_uvs/J0601+1759_X_map.mod
! Writing 115 model components to file: /scr/pima/bp192a1_uvs/J0601+1759_X_map.mod
wobs /scr/pima/bp192a1_uvs/J0601+1759_X_uvs.fits
! Writing UV FITS file: /scr/pima/bp192a1_uvs/J0601+1759_X_uvs.fits
wwins /scr/pima/bp192a1_uvs/J0601+1759_X_map.win
! wwins: Wrote 3 windows to /scr/pima/bp192a1_uvs/J0601+1759_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00172051 Jy
! Component: 100  -  total flux cleaned = -0.00253373 Jy
! Component: 150  -  total flux cleaned = -0.002739 Jy
! Component: 200  -  total flux cleaned = -0.00283161 Jy
! Component: 250  -  total flux cleaned = -0.00278872 Jy
! Component: 300  -  total flux cleaned = -0.00274847 Jy
! Component: 350  -  total flux cleaned = -0.00274932 Jy
! Component: 400  -  total flux cleaned = -0.00275006 Jy
! Component: 450  -  total flux cleaned = -0.00278647 Jy
! Component: 500  -  total flux cleaned = -0.00275323 Jy
! Component: 550  -  total flux cleaned = -0.00262477 Jy
! Component: 600  -  total flux cleaned = -0.0025327 Jy
! Component: 650  -  total flux cleaned = -0.0024439 Jy
! Component: 700  -  total flux cleaned = -0.00233004 Jy
! Component: 750  -  total flux cleaned = -0.00224686 Jy
! Component: 800  -  total flux cleaned = -0.00211292 Jy
! Component: 850  -  total flux cleaned = -0.00203522 Jy
! Component: 900  -  total flux cleaned = -0.00190884 Jy
! Component: 950  -  total flux cleaned = -0.00173608 Jy
! Component: 1000  -  total flux cleaned = -0.00159193 Jy
! Component: 1050  -  total flux cleaned = -0.00145133 Jy
! Component: 1100  -  total flux cleaned = -0.00133646 Jy
! Component: 1150  -  total flux cleaned = -0.00117886 Jy
! Component: 1200  -  total flux cleaned = -0.00102471 Jy
! Component: 1250  -  total flux cleaned = -0.000873784 Jy
! Component: 1300  -  total flux cleaned = -0.000725767 Jy
! Component: 1350  -  total flux cleaned = -0.000580083 Jy
! Component: 1400  -  total flux cleaned = -0.000457628 Jy
! Component: 1450  -  total flux cleaned = -0.000317501 Jy
! Component: 1500  -  total flux cleaned = -0.000179599 Jy
! Component: 1550  -  total flux cleaned = -4.42377e-05 Jy
! Component: 1600  -  total flux cleaned = 0.000127475 Jy
! Component: 1650  -  total flux cleaned = 0.000221573 Jy
! Component: 1700  -  total flux cleaned = 0.00033322 Jy
! Component: 1750  -  total flux cleaned = 0.000425167 Jy
! Component: 1800  -  total flux cleaned = 0.00053435 Jy
! Component: 1850  -  total flux cleaned = 0.000588157 Jy
! Component: 1900  -  total flux cleaned = 0.000677214 Jy
! Component: 1950  -  total flux cleaned = 0.000730016 Jy
! Component: 2000  -  total flux cleaned = 0.000817211 Jy
! Component: 2050  -  total flux cleaned = 0.000868862 Jy
! Component: 2100  -  total flux cleaned = 0.00088596 Jy
! Component: 2150  -  total flux cleaned = 0.000936815 Jy
! Component: 2200  -  total flux cleaned = 0.00102098 Jy
! Component: 2250  -  total flux cleaned = 0.0011041 Jy
! Component: 2300  -  total flux cleaned = 0.00115359 Jy
! Component: 2350  -  total flux cleaned = 0.00116985 Jy
! Component: 2400  -  total flux cleaned = 0.0011535 Jy
! Component: 2450  -  total flux cleaned = 0.00116955 Jy
! Component: 2500  -  total flux cleaned = 0.0011855 Jy
! Component: 2550  -  total flux cleaned = 0.00121735 Jy
! Component: 2600  -  total flux cleaned = 0.00121726 Jy
! Component: 2650  -  total flux cleaned = 0.00121728 Jy
! Component: 2700  -  total flux cleaned = 0.00124855 Jy
! Component: 2750  -  total flux cleaned = 0.00127973 Jy
! Component: 2800  -  total flux cleaned = 0.00135721 Jy
! Component: 2850  -  total flux cleaned = 0.00137258 Jy
! Component: 2900  -  total flux cleaned = 0.00140336 Jy
! Component: 2950  -  total flux cleaned = 0.00149495 Jy
! Component: 3000  -  total flux cleaned = 0.00155554 Jy
! Component: 3050  -  total flux cleaned = 0.00158569 Jy
! Component: 3100  -  total flux cleaned = 0.00166102 Jy
! Component: 3150  -  total flux cleaned = 0.00164595 Jy
! Component: 3200  -  total flux cleaned = 0.00172067 Jy
! Component: 3250  -  total flux cleaned = 0.00175052 Jy
! Component: 3300  -  total flux cleaned = 0.00180993 Jy
! Component: 3350  -  total flux cleaned = 0.00183948 Jy
! Component: 3400  -  total flux cleaned = 0.00189847 Jy
! Component: 3450  -  total flux cleaned = 0.00192785 Jy
! Component: 3500  -  total flux cleaned = 0.00198647 Jy
! Component: 3550  -  total flux cleaned = 0.00201574 Jy
! Component: 3600  -  total flux cleaned = 0.00204496 Jy
! Component: 3650  -  total flux cleaned = 0.00208859 Jy
! Component: 3700  -  total flux cleaned = 0.00213225 Jy
! Component: 3750  -  total flux cleaned = 0.00216126 Jy
! Component: 3800  -  total flux cleaned = 0.00219024 Jy
! Component: 3850  -  total flux cleaned = 0.00224828 Jy
! Component: 3900  -  total flux cleaned = 0.00229165 Jy
! Component: 3950  -  total flux cleaned = 0.00233508 Jy
! Component: 4000  -  total flux cleaned = 0.00236409 Jy
! Component: 4050  -  total flux cleaned = 0.00239304 Jy
! Total flux subtracted in 4096 components = 0.00243628 Jy
! Clean residual min=-0.000966 max=0.000884 Jy/beam
! Clean residual mean=0.000004 rms=0.000242 Jy/beam
! Combined flux in latest and established models = 0.178002 Jy
keep
! Adding 270 model components to the UV plane model.
! The established model now contains 385 components and 0.178002 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bp192a1_uvs/J0601+1759_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.068 x 2.36 at 8.035 degrees (North through East)
! Clean map  min=-0.0019334  max=0.13295 Jy/beam
! Writing clean map to FITS file: /scr/pima/bp192a1_uvs/J0601+1759_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.132948 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000225763 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.509441 0.509441 1.01888 2.03776 4.07553 8.15106 16.3021 32.6042 65.2085
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0006 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.132 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  588.88 
quit
! Quitting program
! Log file /scr/pima/bp192a1_uvs/J0601+1759_X_uvs.log closed on Wed Sep 16 13:32:31 2015