! Started logfile: /scr/pima/bp192a1_uvs/J0601+1759_C_uvs.log on Wed Sep 16 13:33:12 2015
obs /scr/pima/bp192a1_uvs/J0601+1759_C_uva.fits
! Reading UV FITS file: /scr/pima/bp192a1_uvs/J0601+1759_C_uva.fits
! AN table 1: 44 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.828283 visibilities/baseline/integration-bin.
! Found source: J0601+1759
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    4.128e+09      3.2e+07          1      3.2e+07
!  02        2     4.16e+09      3.2e+07          1      3.2e+07
!  03        3    4.192e+09      3.2e+07          1      3.2e+07
!  04        4    4.224e+09      3.2e+07          1      3.2e+07
!  05        5    4.416e+09      3.2e+07          1      3.2e+07
!  06        6    4.512e+09      3.2e+07          1      3.2e+07
!  07        7    4.544e+09      3.2e+07          1      3.2e+07
!  08        8    4.576e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 13120 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.3 
print "taper_size =", taper_size
! taper_size = 40 
![@/home/lpetrov/bin/01_muppet /scr/pima/bp192a1_uvs/J0601+1759_C]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 44 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 44 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 44 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 72 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 44 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 44 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 44 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 44 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.006794Jy  sigma=25.319039
! Fit after  self-cal, rms=0.904202Jy  sigma=22.708791
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.416 mas, bmaj=3.69 mas, bpa=9.485 degrees
! Estimated noise=0.428531 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0679293 Jy
! Component: 100  -  total flux cleaned = 0.0889707 Jy
! Total flux subtracted in 100 components = 0.0889707 Jy
! Clean residual min=-0.004407 max=0.009242 Jy/beam
! Clean residual mean=0.000003 rms=0.001177 Jy/beam
! Combined flux in latest and established models = 0.0889707 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.0889707 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.036336Jy  sigma=0.864751
! Fit after  self-cal, rms=0.036110Jy  sigma=0.858650
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0104297 Jy
! Component: 100  -  total flux cleaned = 0.0162427 Jy
! Total flux subtracted in 100 components = 0.0162427 Jy
! Clean residual min=-0.003021 max=0.003252 Jy/beam
! Clean residual mean=0.000002 rms=0.000696 Jy/beam
! Combined flux in latest and established models = 0.105213 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 15 components and 0.105213 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.031483Jy  sigma=0.742385
! Fit after  self-cal, rms=0.031458Jy  sigma=0.741576
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.863 mas, bmaj=4.18 mas, bpa=8.577 degrees
! Estimated noise=0.251655 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00533369 Jy
! Component: 100  -  total flux cleaned = 0.00788713 Jy
! Component: 150  -  total flux cleaned = 0.00939668 Jy
! Component: 200  -  total flux cleaned = 0.0103432 Jy
! Total flux subtracted in 200 components = 0.0103432 Jy
! Clean residual min=-0.003249 max=0.003493 Jy/beam
! Clean residual mean=0.000002 rms=0.000731 Jy/beam
! Combined flux in latest and established models = 0.115557 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 39 components and 0.115557 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030462Jy  sigma=0.723033
! Fit after  self-cal, rms=0.030460Jy  sigma=0.722828
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.863 x 4.18 at 8.577 degrees (North through East)
! Clean map  min=-0.0031541  max=0.093479 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.14     HN        1.02     KP        0.94     
!   LA        1.09     MK        0.99     NL        1.10     OV        1.01     
!   PT        0.98     SC        1.05     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        1.02     HN        1.00     KP        0.89     
!   LA        1.06     MK        1.02     NL        1.09     OV        0.97     
!   PT        0.96     SC        1.05     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 5.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.02     HN        1.00     KP        0.95     
!   LA        1.07     MK        1.01     NL        1.12     OV        0.94     
!   PT        0.90     SC        1.03     
! 
! 
! Correcting IF 6.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        0.97     HN        1.06     KP        0.90     
!   LA        1.17     MK        0.97     NL        1.09     OV        0.94     
!   PT        1.02     SC        0.97     
! 
! 
! Correcting IF 7.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.91     HN        0.96     KP        0.91     
!   LA        1.09     MK        0.97     NL        1.10     OV        0.95     
!   PT        0.93     SC        0.91     
! 
! 
! Correcting IF 8.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.94     HN        1.00     KP        0.92     
!   LA        1.06     MK        0.96     NL        1.01     OV        0.99     
!   PT        0.91     SC        0.91     
! 
! 
! Fit before self-cal, rms=0.030460Jy  sigma=0.722828
! Fit after  self-cal, rms=0.029134Jy  sigma=0.689016
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.854 mas, bmaj=4.179 mas, bpa=8.811 degrees
! Estimated noise=0.25078 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000556052 Jy
! Component: 100  -  total flux cleaned = 0.000666528 Jy
! Component: 150  -  total flux cleaned = 0.000739361 Jy
! Component: 200  -  total flux cleaned = 0.000804431 Jy
! Total flux subtracted in 200 components = 0.000804431 Jy
! Clean residual min=-0.001683 max=0.001449 Jy/beam
! Clean residual mean=-0.000000 rms=0.000337 Jy/beam
! Combined flux in latest and established models = 0.116361 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 50 components and 0.116361 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029114Jy  sigma=0.688739
! Fit after  self-cal, rms=0.029107Jy  sigma=0.688586
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029107Jy  sigma=0.688586
! Fit after  self-cal, rms=0.029101Jy  sigma=0.688525
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.851 mas, bmaj=4.174 mas, bpa=8.84 degrees
! Estimated noise=0.250911 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000381616 Jy
! Component: 100  -  total flux cleaned = 0.000460401 Jy
! Component: 150  -  total flux cleaned = 0.000529928 Jy
! Component: 200  -  total flux cleaned = 0.000600399 Jy
! Total flux subtracted in 200 components = 0.000600399 Jy
! Clean residual min=-0.001673 max=0.001463 Jy/beam
! Clean residual mean=-0.000000 rms=0.000337 Jy/beam
! Combined flux in latest and established models = 0.116961 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 55 components and 0.116961 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029089Jy  sigma=0.688393
! Fit after  self-cal, rms=0.029088Jy  sigma=0.688374
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.55388e-06 Jy
! Component: 100  -  total flux cleaned = 3.49223e-05 Jy
! Component: 150  -  total flux cleaned = 5.63226e-05 Jy
! Component: 200  -  total flux cleaned = 6.97915e-05 Jy
! Total flux subtracted in 200 components = 6.97915e-05 Jy
! Clean residual min=-0.001668 max=0.001463 Jy/beam
! Clean residual mean=-0.000000 rms=0.000335 Jy/beam
! Combined flux in latest and established models = 0.117031 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 59 components and 0.117031 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029084Jy  sigma=0.688283
! Fit after  self-cal, rms=0.029083Jy  sigma=0.688268
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029083Jy  sigma=0.688268
! Fit after  self-cal, rms=0.029058Jy  sigma=0.688218
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.848 mas, bmaj=4.169 mas, bpa=8.852 degrees
! Estimated noise=0.250868 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000248258 Jy
! Component: 100  -  total flux cleaned = 0.000307739 Jy
! Component: 150  -  total flux cleaned = 0.000337905 Jy
! Component: 200  -  total flux cleaned = 0.000365326 Jy
! Total flux subtracted in 200 components = 0.000365326 Jy
! Clean residual min=-0.001665 max=0.001466 Jy/beam
! Clean residual mean=-0.000000 rms=0.000335 Jy/beam
! Combined flux in latest and established models = 0.117397 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 62 components and 0.117397 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029051Jy  sigma=0.688161
! Fit after  self-cal, rms=0.029050Jy  sigma=0.688152
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.69784e-06 Jy
! Component: 100  -  total flux cleaned = 1.6389e-05 Jy
! Component: 150  -  total flux cleaned = 3.9712e-05 Jy
! Component: 200  -  total flux cleaned = 5.0473e-05 Jy
! Total flux subtracted in 200 components = 5.0473e-05 Jy
! Clean residual min=-0.001662 max=0.001465 Jy/beam
! Clean residual mean=-0.000000 rms=0.000335 Jy/beam
! Combined flux in latest and established models = 0.117447 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 63 components and 0.117447 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029047Jy  sigma=0.688093
! Fit after  self-cal, rms=0.029047Jy  sigma=0.688084
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029047Jy  sigma=0.688084
! Fit after  self-cal, rms=0.029026Jy  sigma=0.688059
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.873 mas, bmaj=5.514 mas, bpa=-0.7067 degrees
! Estimated noise=0.300121 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000326534 Jy
! Component: 100  -  total flux cleaned = 0.000317736 Jy
! Component: 150  -  total flux cleaned = 0.000294893 Jy
! Component: 200  -  total flux cleaned = 0.000271134 Jy
! Total flux subtracted in 200 components = 0.000271134 Jy
! Clean residual min=-0.001873 max=0.001916 Jy/beam
! Clean residual mean=-0.000000 rms=0.000494 Jy/beam
! Combined flux in latest and established models = 0.117718 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 66 components and 0.117718 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029026Jy  sigma=0.688194
! Fit after  self-cal, rms=0.029019Jy  sigma=0.688048
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.83794e-07 Jy
! Component: 100  -  total flux cleaned = 9.68039e-07 Jy
! Component: 150  -  total flux cleaned = -5.26005e-06 Jy
! Component: 200  -  total flux cleaned = -1.04258e-05 Jy
! Total flux subtracted in 200 components = -1.04258e-05 Jy
! Clean residual min=-0.001866 max=0.001914 Jy/beam
! Clean residual mean=-0.000000 rms=0.000493 Jy/beam
! Combined flux in latest and established models = 0.117708 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 68 components and 0.117708 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029022Jy  sigma=0.688126
! Fit after  self-cal, rms=0.029017Jy  sigma=0.688012
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.846 mas, bmaj=4.166 mas, bpa=8.865 degrees
! Estimated noise=0.250796 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.846 x 4.166 at 8.865 degrees (North through East)
! Clean map  min=-0.0015832  max=0.092361 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.4 mas, bmaj=3.685 mas, bpa=9.584 degrees
! Estimated noise=0.424862 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0675753 Jy
! Component: 100  -  total flux cleaned = 0.0896237 Jy
! Component: 150  -  total flux cleaned = 0.100083 Jy
! Component: 200  -  total flux cleaned = 0.105865 Jy
! Total flux subtracted in 200 components = 0.105865 Jy
! Clean residual min=-0.002235 max=0.003775 Jy/beam
! Clean residual mean=0.000001 rms=0.000581 Jy/beam
! Combined flux in latest and established models = 0.105865 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 24 model components to the UV plane model.
! The established model now contains 24 components and 0.105865 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.846 mas, bmaj=4.166 mas, bpa=8.865 degrees
! Estimated noise=0.250796 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-1.5, 1.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00545849 Jy
! Component: 100  -  total flux cleaned = 0.00824571 Jy
! Component: 150  -  total flux cleaned = 0.0098355 Jy
! Component: 200  -  total flux cleaned = 0.0108594 Jy
! Total flux subtracted in 200 components = 0.0108594 Jy
! Clean residual min=-0.001644 max=0.001643 Jy/beam
! Clean residual mean=0.000000 rms=0.000331 Jy/beam
! Combined flux in latest and established models = 0.116724 Jy
! Adding 31 model components to the UV plane model.
! The established model now contains 51 components and 0.116724 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.873 mas, bmaj=5.514 mas, bpa=-0.7067 degrees
! Estimated noise=0.300121 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000828543 Jy
! Component: 100  -  total flux cleaned = 0.00131198 Jy
! Component: 150  -  total flux cleaned = 0.00162463 Jy
! Component: 200  -  total flux cleaned = 0.00173504 Jy
! Total flux subtracted in 200 components = 0.00173504 Jy
! Clean residual min=-0.001859 max=0.001867 Jy/beam
! Clean residual mean=0.000001 rms=0.000475 Jy/beam
! Combined flux in latest and established models = 0.118459 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.43459e-05 Jy
! Component: 100  -  total flux cleaned = 0.000129909 Jy
! Component: 150  -  total flux cleaned = 0.000171885 Jy
! Component: 200  -  total flux cleaned = 0.000186008 Jy
! Total flux subtracted in 200 components = 0.000186008 Jy
! Clean residual min=-0.001844 max=0.001836 Jy/beam
! Clean residual mean=0.000001 rms=0.000474 Jy/beam
! Combined flux in latest and established models = 0.118645 Jy
! Adding 38 model components to the UV plane model.
! The established model now contains 86 components and 0.118645 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.846 mas, bmaj=4.166 mas, bpa=8.865 degrees
! Estimated noise=0.250796 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.47235e-05 Jy
! Component: 100  -  total flux cleaned = -2.03456e-05 Jy
! Component: 150  -  total flux cleaned = -8.67261e-06 Jy
! Component: 200  -  total flux cleaned = -8.80161e-06 Jy
! Total flux subtracted in 200 components = -8.80161e-06 Jy
! Clean residual min=-0.001543 max=0.001462 Jy/beam
! Clean residual mean=0.000000 rms=0.000318 Jy/beam
! Combined flux in latest and established models = 0.118636 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 99 components and 0.118636 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.028976Jy  sigma=0.687173
! Fit after  self-cal, rms=0.028971Jy  sigma=0.687028
wmodel /scr/pima/bp192a1_uvs/J0601+1759_C_map.mod
! Writing 99 model components to file: /scr/pima/bp192a1_uvs/J0601+1759_C_map.mod
wobs /scr/pima/bp192a1_uvs/J0601+1759_C_uvs.fits
! Writing UV FITS file: /scr/pima/bp192a1_uvs/J0601+1759_C_uvs.fits
wwins /scr/pima/bp192a1_uvs/J0601+1759_C_map.win
! wwins: Wrote 2 windows to /scr/pima/bp192a1_uvs/J0601+1759_C_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 3.25811e-05 Jy
! Component: 100  -  total flux cleaned = 0.00018602 Jy
! Component: 150  -  total flux cleaned = 0.00018682 Jy
! Component: 200  -  total flux cleaned = 0.000169189 Jy
! Component: 250  -  total flux cleaned = 0.000134034 Jy
! Component: 300  -  total flux cleaned = 0.000116944 Jy
! Component: 350  -  total flux cleaned = 5.2532e-05 Jy
! Component: 400  -  total flux cleaned = 2.17474e-05 Jy
! Component: 450  -  total flux cleaned = 6.72566e-06 Jy
! Component: 500  -  total flux cleaned = -3.66294e-05 Jy
! Component: 550  -  total flux cleaned = -5.06724e-05 Jy
! Component: 600  -  total flux cleaned = -0.000105231 Jy
! Component: 650  -  total flux cleaned = -0.000118312 Jy
! Component: 700  -  total flux cleaned = -0.000144355 Jy
! Component: 750  -  total flux cleaned = -0.000181998 Jy
! Component: 800  -  total flux cleaned = -0.000206455 Jy
! Component: 850  -  total flux cleaned = -0.00021847 Jy
! Component: 900  -  total flux cleaned = -0.000230532 Jy
! Component: 950  -  total flux cleaned = -0.000253779 Jy
! Component: 1000  -  total flux cleaned = -0.000254016 Jy
! Component: 1050  -  total flux cleaned = -0.000298674 Jy
! Component: 1100  -  total flux cleaned = -0.000342128 Jy
! Component: 1150  -  total flux cleaned = -0.000363379 Jy
! Component: 1200  -  total flux cleaned = -0.000394884 Jy
! Component: 1250  -  total flux cleaned = -0.000415461 Jy
! Component: 1300  -  total flux cleaned = -0.000455715 Jy
! Component: 1350  -  total flux cleaned = -0.000485429 Jy
! Component: 1400  -  total flux cleaned = -0.000573421 Jy
! Component: 1450  -  total flux cleaned = -0.000583026 Jy
! Component: 1500  -  total flux cleaned = -0.000611539 Jy
! Component: 1550  -  total flux cleaned = -0.000676843 Jy
! Component: 1600  -  total flux cleaned = -0.00066759 Jy
! Component: 1650  -  total flux cleaned = -0.000731407 Jy
! Component: 1700  -  total flux cleaned = -0.000758459 Jy
! Component: 1750  -  total flux cleaned = -0.000785186 Jy
! Component: 1800  -  total flux cleaned = -0.000846824 Jy
! Component: 1850  -  total flux cleaned = -0.000855594 Jy
! Component: 1900  -  total flux cleaned = -0.000898455 Jy
! Component: 1950  -  total flux cleaned = -0.000924007 Jy
! Component: 2000  -  total flux cleaned = -0.000949209 Jy
! Component: 2050  -  total flux cleaned = -0.000982281 Jy
! Component: 2100  -  total flux cleaned = -0.000982339 Jy
! Component: 2150  -  total flux cleaned = -0.000982474 Jy
! Component: 2200  -  total flux cleaned = -0.00102263 Jy
! Component: 2250  -  total flux cleaned = -0.00103056 Jy
! Component: 2300  -  total flux cleaned = -0.00102268 Jy
! Component: 2350  -  total flux cleaned = -0.00108511 Jy
! Component: 2400  -  total flux cleaned = -0.00108504 Jy
! Component: 2450  -  total flux cleaned = -0.00109264 Jy
! Component: 2500  -  total flux cleaned = -0.0011229 Jy
! Component: 2550  -  total flux cleaned = -0.00111532 Jy
! Component: 2600  -  total flux cleaned = -0.00116 Jy
! Component: 2650  -  total flux cleaned = -0.00113789 Jy
! Component: 2700  -  total flux cleaned = -0.00115977 Jy
! Component: 2750  -  total flux cleaned = -0.00115242 Jy
! Component: 2800  -  total flux cleaned = -0.00118844 Jy
! Component: 2850  -  total flux cleaned = -0.00121691 Jy
! Component: 2900  -  total flux cleaned = -0.001224 Jy
! Component: 2950  -  total flux cleaned = -0.00123796 Jy
! Component: 3000  -  total flux cleaned = -0.00125873 Jy
! Component: 3050  -  total flux cleaned = -0.00127253 Jy
! Component: 3100  -  total flux cleaned = -0.0012794 Jy
! Component: 3150  -  total flux cleaned = -0.00129304 Jy
! Component: 3200  -  total flux cleaned = -0.00130648 Jy
! Component: 3250  -  total flux cleaned = -0.00133338 Jy
! Component: 3300  -  total flux cleaned = -0.0013467 Jy
! Component: 3350  -  total flux cleaned = -0.00135991 Jy
! Component: 3400  -  total flux cleaned = -0.00137953 Jy
! Component: 3450  -  total flux cleaned = -0.0013666 Jy
! Component: 3500  -  total flux cleaned = -0.00141812 Jy
! Component: 3550  -  total flux cleaned = -0.00141168 Jy
! Component: 3600  -  total flux cleaned = -0.0013989 Jy
! Component: 3650  -  total flux cleaned = -0.00143044 Jy
! Component: 3700  -  total flux cleaned = -0.00143048 Jy
! Component: 3750  -  total flux cleaned = -0.00141802 Jy
! Component: 3800  -  total flux cleaned = -0.00144272 Jy
! Component: 3850  -  total flux cleaned = -0.00144884 Jy
! Component: 3900  -  total flux cleaned = -0.0014732 Jy
! Component: 3950  -  total flux cleaned = -0.00146107 Jy
! Component: 4000  -  total flux cleaned = -0.0014671 Jy
! Component: 4050  -  total flux cleaned = -0.00147905 Jy
! Total flux subtracted in 4096 components = -0.00149093 Jy
! Clean residual min=-0.000323 max=0.000332 Jy/beam
! Clean residual mean=0.000000 rms=0.000108 Jy/beam
! Combined flux in latest and established models = 0.117145 Jy
keep
! Adding 321 model components to the UV plane model.
! The established model now contains 420 components and 0.117145 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bp192a1_uvs/J0601+1759_C\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.846 x 4.166 at 8.865 degrees (North through East)
! Clean map  min=-0.00070701  max=0.092753 Jy/beam
! Writing clean map to FITS file: /scr/pima/bp192a1_uvs/J0601+1759_C_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0927533 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000107874 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.348906 0.348906 0.697812 1.39562 2.79125 5.5825 11.165 22.33 44.66 89.32
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0003 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.092 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  859.829 
quit
! Quitting program
! Log file /scr/pima/bp192a1_uvs/J0601+1759_C_uvs.log closed on Wed Sep 16 13:33:17 2015