! Started logfile: /scr/pima/bp192a1_uvs/J0548-3258_C_uvs.log on Wed Sep 16 13:32:45 2015
obs /scr/pima/bp192a1_uvs/J0548-3258_C_uva.fits
! Reading UV FITS file: /scr/pima/bp192a1_uvs/J0548-3258_C_uva.fits
! AN table 1: 19 integrations on 10 of 10 possible baselines.
! Apparent sampling: 0.8 visibilities/baseline/integration-bin.
! Found source: J0548-3258
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    4.128e+09      3.2e+07          1      3.2e+07
!  02        2     4.16e+09      3.2e+07          1      3.2e+07
!  03        3    4.192e+09      3.2e+07          1      3.2e+07
!  04        4    4.224e+09      3.2e+07          1      3.2e+07
!  05        5    4.416e+09      3.2e+07          1      3.2e+07
!  06        6    4.512e+09      3.2e+07          1      3.2e+07
!  07        7    4.544e+09      3.2e+07          1      3.2e+07
!  08        8    4.576e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 1216 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.3 
print "taper_size =", taper_size
! taper_size = 40 
![@/home/lpetrov/bin/01_muppet /scr/pima/bp192a1_uvs/J0548-3258_C]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.999898Jy  sigma=18.537945
! Fit after  self-cal, rms=0.971096Jy  sigma=18.023742
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=7.305 mas, bmaj=41.45 mas, bpa=-3.547 degrees
! Estimated noise=1.48549 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0219958 Jy
! Component: 100  -  total flux cleaned = 0.0246587 Jy
! Total flux subtracted in 100 components = 0.0246587 Jy
! Clean residual min=-0.002055 max=0.002072 Jy/beam
! Clean residual mean=-0.000008 rms=0.000908 Jy/beam
! Combined flux in latest and established models = 0.0246587 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 26 components and 0.0246587 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.033410Jy  sigma=0.593574
! Fit after  self-cal, rms=0.032222Jy  sigma=0.570412
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=8.372 mas, bmaj=38.51 mas, bpa=-3.525 degrees
! Estimated noise=1.10428 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000602571 Jy
! Component: 100  -  total flux cleaned = 0.000108888 Jy
! Component: 150  -  total flux cleaned = -0.000228681 Jy
! Component: 200  -  total flux cleaned = -0.000444846 Jy
! Total flux subtracted in 200 components = -0.000444846 Jy
! Clean residual min=-0.000809 max=0.000810 Jy/beam
! Clean residual mean=0.000001 rms=0.000360 Jy/beam
! Combined flux in latest and established models = 0.0242138 Jy
! Performing phase self-cal
! Adding 116 model components to the UV plane model.
! The established model now contains 141 components and 0.0242138 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.031552Jy  sigma=0.560207
! Fit after  self-cal, rms=0.031385Jy  sigma=0.558832
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 8.372 x 38.51 at -3.525 degrees (North through East)
! Clean map  min=-0.0029087  max=0.027095 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    KP        1.00*    LA        1.00*    OV        1.00*    
!   PT        1.00*    
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    KP        1.00*    LA        1.00*    OV        1.00*    
!   PT        1.00*    
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    KP        1.00*    LA        1.00*    OV        1.00*    
!   PT        1.00*    
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    KP        1.00*    LA        1.00*    OV        1.00*    
!   PT        1.00*    
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    KP        1.00*    LA        1.00*    OV        1.00*    
!   PT        1.00*    
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    KP        1.00*    LA        1.00*    OV        1.00*    
!   PT        1.00*    
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.94     KP        1.03     LA        1.13     OV        0.86     
!   PT        1.03     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    KP        1.00*    LA        1.00*    OV        1.00*    
!   PT        1.00*    
! 
! 
! Fit before self-cal, rms=0.031385Jy  sigma=0.558832
! Fit after  self-cal, rms=0.031228Jy  sigma=0.558446
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=8.321 mas, bmaj=38.57 mas, bpa=-3.445 degrees
! Estimated noise=1.10171 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00164553 Jy
! Component: 100  -  total flux cleaned = -0.00232452 Jy
! Component: 150  -  total flux cleaned = -0.00262359 Jy
! Component: 200  -  total flux cleaned = -0.00259034 Jy
! Total flux subtracted in 200 components = -0.00259034 Jy
! Clean residual min=-0.000532 max=0.000533 Jy/beam
! Clean residual mean=-0.000002 rms=0.000226 Jy/beam
! Combined flux in latest and established models = 0.0216235 Jy
! Performing phase self-cal
! Adding 127 model components to the UV plane model.
! The established model now contains 258 components and 0.0216235 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.031097Jy  sigma=0.556616
! Fit after  self-cal, rms=0.031029Jy  sigma=0.555786
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.031029Jy  sigma=0.555786
! Fit after  self-cal, rms=0.031120Jy  sigma=0.555737
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.303 mas, bmaj=38.59 mas, bpa=-3.417 degrees
! Estimated noise=1.10333 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00103889 Jy
! Component: 100  -  total flux cleaned = -0.00149338 Jy
! Component: 150  -  total flux cleaned = -0.00174774 Jy
! Component: 200  -  total flux cleaned = -0.001823 Jy
! Total flux subtracted in 200 components = -0.001823 Jy
! Clean residual min=-0.000406 max=0.000405 Jy/beam
! Clean residual mean=-0.000001 rms=0.000176 Jy/beam
! Combined flux in latest and established models = 0.0198005 Jy
selfcal
! Performing phase self-cal
! Adding 101 model components to the UV plane model.
! The established model now contains 352 components and 0.0198005 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.031055Jy  sigma=0.554726
! Fit after  self-cal, rms=0.031029Jy  sigma=0.554542
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000392474 Jy
! Component: 100  -  total flux cleaned = -0.000604658 Jy
! Component: 150  -  total flux cleaned = -0.000651978 Jy
! Component: 200  -  total flux cleaned = -0.000717558 Jy
! Total flux subtracted in 200 components = -0.000717558 Jy
! Clean residual min=-0.000351 max=0.000349 Jy/beam
! Clean residual mean=-0.000001 rms=0.000152 Jy/beam
! Combined flux in latest and established models = 0.0190829 Jy
! Performing phase self-cal
! Adding 100 model components to the UV plane model.
! The established model now contains 429 components and 0.0190829 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030989Jy  sigma=0.553915
! Fit after  self-cal, rms=0.030952Jy  sigma=0.553635
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030952Jy  sigma=0.553635
! Fit after  self-cal, rms=0.030998Jy  sigma=0.553256
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.33 mas, bmaj=38.58 mas, bpa=-3.481 degrees
! Estimated noise=1.10167 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000245969 Jy
! Component: 100  -  total flux cleaned = -0.000399591 Jy
! Component: 150  -  total flux cleaned = -0.000604092 Jy
! Component: 200  -  total flux cleaned = -0.000665769 Jy
! Total flux subtracted in 200 components = -0.000665769 Jy
! Clean residual min=-0.000252 max=0.000252 Jy/beam
! Clean residual mean=-0.000002 rms=0.000111 Jy/beam
! Combined flux in latest and established models = 0.0184172 Jy
selfcal
! Performing phase self-cal
! Adding 95 model components to the UV plane model.
! The established model now contains 522 components and 0.0184172 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030973Jy  sigma=0.552890
! Fit after  self-cal, rms=0.030981Jy  sigma=0.552708
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.78845e-05 Jy
! Component: 100  -  total flux cleaned = -0.000103642 Jy
! Component: 150  -  total flux cleaned = -0.000202096 Jy
! Component: 200  -  total flux cleaned = -0.0002333 Jy
! Total flux subtracted in 200 components = -0.0002333 Jy
! Clean residual min=-0.000252 max=0.000249 Jy/beam
! Clean residual mean=-0.000002 rms=0.000113 Jy/beam
! Combined flux in latest and established models = 0.0181839 Jy
! Performing phase self-cal
! Adding 117 model components to the UV plane model.
! The established model now contains 633 components and 0.0181839 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030961Jy  sigma=0.552407
! Fit after  self-cal, rms=0.030955Jy  sigma=0.552366
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030955Jy  sigma=0.552366
! Fit after  self-cal, rms=0.031068Jy  sigma=0.552330
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.638 mas, bmaj=38.22 mas, bpa=-3.485 degrees
! Estimated noise=1.10355 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000193416 Jy
! Component: 100  -  total flux cleaned = -0.000335515 Jy
! Component: 150  -  total flux cleaned = -0.000466434 Jy
! Component: 200  -  total flux cleaned = -0.000520573 Jy
! Total flux subtracted in 200 components = -0.000520573 Jy
! Clean residual min=-0.000222 max=0.000224 Jy/beam
! Clean residual mean=-0.000002 rms=0.000099 Jy/beam
! Combined flux in latest and established models = 0.0176633 Jy
selfcal
! Performing phase self-cal
! Adding 121 model components to the UV plane model.
! The established model now contains 723 components and 0.0176633 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.031052Jy  sigma=0.552097
! Fit after  self-cal, rms=0.031060Jy  sigma=0.552048
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000110963 Jy
! Component: 100  -  total flux cleaned = -0.000139723 Jy
! Component: 150  -  total flux cleaned = -0.000154328 Jy
! Component: 200  -  total flux cleaned = -0.000128971 Jy
! Total flux subtracted in 200 components = -0.000128971 Jy
! Clean residual min=-0.000210 max=0.000208 Jy/beam
! Clean residual mean=-0.000002 rms=0.000096 Jy/beam
! Combined flux in latest and established models = 0.0175343 Jy
! Performing phase self-cal
! Adding 106 model components to the UV plane model.
! The established model now contains 797 components and 0.0175343 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.031045Jy  sigma=0.551854
! Fit after  self-cal, rms=0.031042Jy  sigma=0.551828
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=8.332 mas, bmaj=38.58 mas, bpa=-3.502 degrees
! Estimated noise=1.10225 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 8.332 x 38.58 at -3.502 degrees (North through East)
! Clean map  min=-0.0030557  max=0.026305 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.271 mas, bmaj=41.5 mas, bpa=-3.539 degrees
! Estimated noise=1.47951 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0220933 Jy
! Component: 100  -  total flux cleaned = 0.0200537 Jy
! Component: 150  -  total flux cleaned = 0.018662 Jy
! Component: 200  -  total flux cleaned = 0.0179367 Jy
! Total flux subtracted in 200 components = 0.0179367 Jy
! Clean residual min=-0.001717 max=0.001693 Jy/beam
! Clean residual mean=-0.000003 rms=0.000711 Jy/beam
! Combined flux in latest and established models = 0.0179367 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 102 model components to the UV plane model.
! The established model now contains 102 components and 0.0179367 Jy
! Inverting map and beam 
! Estimated beam: bmin=8.332 mas, bmaj=38.58 mas, bpa=-3.502 degrees
! Estimated noise=1.10225 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000610205 Jy
! Component: 100  -  total flux cleaned = -0.00143099 Jy
! Component: 150  -  total flux cleaned = -0.00202916 Jy
! Component: 200  -  total flux cleaned = -0.00213523 Jy
! Total flux subtracted in 200 components = -0.00213523 Jy
! Clean residual min=-0.000821 max=0.000840 Jy/beam
! Clean residual mean=-0.000002 rms=0.000371 Jy/beam
! Combined flux in latest and established models = 0.0158015 Jy
! Adding 111 model components to the UV plane model.
! The established model now contains 213 components and 0.0158015 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.638 mas, bmaj=38.22 mas, bpa=-3.485 degrees
! Estimated noise=1.10355 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000391983 Jy
! Component: 100  -  total flux cleaned = 0.000354005 Jy
! Component: 150  -  total flux cleaned = 0.000296467 Jy
! Component: 200  -  total flux cleaned = 0.00021087 Jy
! Total flux subtracted in 200 components = 0.00021087 Jy
! Clean residual min=-0.000461 max=0.000461 Jy/beam
! Clean residual mean=-0.000001 rms=0.000216 Jy/beam
! Combined flux in latest and established models = 0.0160124 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000133863 Jy
! Component: 100  -  total flux cleaned = -0.000336075 Jy
! Component: 150  -  total flux cleaned = -0.000456152 Jy
! Component: 200  -  total flux cleaned = -0.000646008 Jy
! Total flux subtracted in 200 components = -0.000646008 Jy
! Clean residual min=-0.000394 max=0.000396 Jy/beam
! Clean residual mean=-0.000003 rms=0.000173 Jy/beam
! Combined flux in latest and established models = 0.0153664 Jy
! Adding 174 model components to the UV plane model.
! The established model now contains 385 components and 0.0153664 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=8.332 mas, bmaj=38.58 mas, bpa=-3.502 degrees
! Estimated noise=1.10225 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00026873 Jy
! Component: 100  -  total flux cleaned = -0.000311419 Jy
! Component: 150  -  total flux cleaned = -0.000426144 Jy
! Component: 200  -  total flux cleaned = -0.000603831 Jy
! Total flux subtracted in 200 components = -0.000603831 Jy
! Clean residual min=-0.000290 max=0.000289 Jy/beam
! Clean residual mean=-0.000002 rms=0.000124 Jy/beam
! Combined flux in latest and established models = 0.0147626 Jy
selfcal
! Performing phase self-cal
! Adding 97 model components to the UV plane model.
! The established model now contains 478 components and 0.0147626 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.031055Jy  sigma=0.552082
! Fit after  self-cal, rms=0.031044Jy  sigma=0.552000
wmodel /scr/pima/bp192a1_uvs/J0548-3258_C_map.mod
! Writing 478 model components to file: /scr/pima/bp192a1_uvs/J0548-3258_C_map.mod
wobs /scr/pima/bp192a1_uvs/J0548-3258_C_uvs.fits
! Writing UV FITS file: /scr/pima/bp192a1_uvs/J0548-3258_C_uvs.fits
wwins /scr/pima/bp192a1_uvs/J0548-3258_C_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
![Exited script file: /home/lpetrov/bin/01_muppet]
! 
wmap "/scr/pima/bp192a1_uvs/J0548-3258_C\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 8.332 x 38.58 at -3.502 degrees (North through East)
! Clean map  min=-0.002965  max=0.02172 Jy/beam
! Writing clean map to FITS file: /scr/pima/bp192a1_uvs/J0548-3258_C_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0217198 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000136457 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.88478 1.88478 3.76956 7.53912 15.0782 30.1565 60.3129
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0004 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.021 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  159.169 
quit
! Quitting program
! Log file /scr/pima/bp192a1_uvs/J0548-3258_C_uvs.log closed on Wed Sep 16 13:32:50 2015