! Started logfile: /scr/pima/bp192a1_uvs/J0544+2655_X_uvs.log on Wed Sep 16 13:32:01 2015
obs /scr/pima/bp192a1_uvs/J0544+2655_X_uva.fits
! Reading UV FITS file: /scr/pima/bp192a1_uvs/J0544+2655_X_uva.fits
! AN table 1: 33 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.924579 visibilities/baseline/integration-bin.
! Found source: J0544+2655
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    7.392e+09      3.2e+07          1      3.2e+07
!  02        2    7.424e+09      3.2e+07          1      3.2e+07
!  03        3    7.456e+09      3.2e+07          1      3.2e+07
!  04        4    7.552e+09      3.2e+07          1      3.2e+07
!  05        5    7.744e+09      3.2e+07          1      3.2e+07
!  06        6    7.776e+09      3.2e+07          1      3.2e+07
!  07        7    7.808e+09      3.2e+07          1      3.2e+07
!  08        8     7.84e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 10984 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /scr/pima/bp192a1_uvs/J0544+2655_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.004369Jy  sigma=20.394124
! Fit after  self-cal, rms=0.944556Jy  sigma=19.213452
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8273 mas, bmaj=2.183 mas, bpa=19.17 degrees
! Estimated noise=0.642399 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0411589 Jy
! Component: 100  -  total flux cleaned = 0.0513754 Jy
! Total flux subtracted in 100 components = 0.0513754 Jy
! Clean residual min=-0.004920 max=0.013276 Jy/beam
! Clean residual mean=-0.000030 rms=0.001448 Jy/beam
! Combined flux in latest and established models = 0.0513754 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 0.0513754 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.054210Jy  sigma=0.824554
! Fit after  self-cal, rms=0.053348Jy  sigma=0.804987
! Inverting map 
! Added new window around map position (2.8, -2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0114063 Jy
! Component: 100  -  total flux cleaned = 0.017387 Jy
! Total flux subtracted in 100 components = 0.017387 Jy
! Clean residual min=-0.004004 max=0.004554 Jy/beam
! Clean residual mean=-0.000019 rms=0.000975 Jy/beam
! Combined flux in latest and established models = 0.0687623 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 27 components and 0.0687623 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.050484Jy  sigma=0.731677
! Fit after  self-cal, rms=0.050253Jy  sigma=0.726094
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.023 mas, bmaj=2.376 mas, bpa=17.29 degrees
! Estimated noise=0.340463 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00609321 Jy
! Component: 100  -  total flux cleaned = 0.0100118 Jy
! Component: 150  -  total flux cleaned = 0.0128532 Jy
! Component: 200  -  total flux cleaned = 0.0149731 Jy
! Total flux subtracted in 200 components = 0.0149731 Jy
! Clean residual min=-0.003298 max=0.003351 Jy/beam
! Clean residual mean=-0.000013 rms=0.000732 Jy/beam
! Combined flux in latest and established models = 0.0837354 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 45 components and 0.0837354 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.049229Jy  sigma=0.703638
! Fit after  self-cal, rms=0.049196Jy  sigma=0.702276
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.023 x 2.376 at 17.29 degrees (North through East)
! Clean map  min=-0.0031864  max=0.054915 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.98     HN        0.99     KP        1.02     
!   LA        0.99     MK        1.18     NL        1.09     OV        0.97     
!   PT        0.87     SC        1.02     
! 
! 
! Correcting IF 5.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 6.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 7.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 8.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Fit before self-cal, rms=0.049196Jy  sigma=0.702276
! Fit after  self-cal, rms=0.049292Jy  sigma=0.701063
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.025 mas, bmaj=2.378 mas, bpa=17.4 degrees
! Estimated noise=0.340918 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00193682 Jy
! Component: 100  -  total flux cleaned = 0.00259762 Jy
! Component: 150  -  total flux cleaned = 0.00319731 Jy
! Component: 200  -  total flux cleaned = 0.00368944 Jy
! Total flux subtracted in 200 components = 0.00368944 Jy
! Clean residual min=-0.002965 max=0.002740 Jy/beam
! Clean residual mean=-0.000007 rms=0.000631 Jy/beam
! Combined flux in latest and established models = 0.0874249 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 51 components and 0.0874249 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.049160Jy  sigma=0.698983
! Fit after  self-cal, rms=0.049158Jy  sigma=0.698715
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.049158Jy  sigma=0.698715
! Fit after  self-cal, rms=0.049210Jy  sigma=0.698620
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.024 mas, bmaj=2.377 mas, bpa=17.4 degrees
! Estimated noise=0.341517 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000825502 Jy
! Component: 100  -  total flux cleaned = 0.00112918 Jy
! Component: 150  -  total flux cleaned = 0.00127079 Jy
! Component: 200  -  total flux cleaned = 0.00139896 Jy
! Total flux subtracted in 200 components = 0.00139896 Jy
! Clean residual min=-0.002947 max=0.002599 Jy/beam
! Clean residual mean=-0.000006 rms=0.000624 Jy/beam
! Combined flux in latest and established models = 0.0888238 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 57 components and 0.0888238 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.049167Jy  sigma=0.698129
! Fit after  self-cal, rms=0.049165Jy  sigma=0.698076
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000106826 Jy
! Component: 100  -  total flux cleaned = 0.000147036 Jy
! Component: 150  -  total flux cleaned = 0.000185043 Jy
! Component: 200  -  total flux cleaned = 0.000220856 Jy
! Total flux subtracted in 200 components = 0.000220856 Jy
! Clean residual min=-0.002901 max=0.002509 Jy/beam
! Clean residual mean=-0.000006 rms=0.000619 Jy/beam
! Combined flux in latest and established models = 0.0890447 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 62 components and 0.0890447 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.049146Jy  sigma=0.697776
! Fit after  self-cal, rms=0.049144Jy  sigma=0.697754
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.049144Jy  sigma=0.697754
! Fit after  self-cal, rms=0.048884Jy  sigma=0.695296
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.022 mas, bmaj=2.38 mas, bpa=17.4 degrees
! Estimated noise=0.34215 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.16019e-05 Jy
! Component: 100  -  total flux cleaned = 3.12781e-06 Jy
! Component: 150  -  total flux cleaned = 3.57068e-06 Jy
! Component: 200  -  total flux cleaned = 4.28794e-06 Jy
! Total flux subtracted in 200 components = 4.28794e-06 Jy
! Clean residual min=-0.002593 max=0.002283 Jy/beam
! Clean residual mean=-0.000006 rms=0.000575 Jy/beam
! Combined flux in latest and established models = 0.089049 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 64 components and 0.089049 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.048872Jy  sigma=0.695061
! Fit after  self-cal, rms=0.048867Jy  sigma=0.695003
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.38562e-05 Jy
! Component: 100  -  total flux cleaned = 2.61794e-05 Jy
! Component: 150  -  total flux cleaned = 5.02098e-05 Jy
! Component: 200  -  total flux cleaned = 6.14595e-05 Jy
! Total flux subtracted in 200 components = 6.14595e-05 Jy
! Clean residual min=-0.002586 max=0.002238 Jy/beam
! Clean residual mean=-0.000006 rms=0.000574 Jy/beam
! Combined flux in latest and established models = 0.0891105 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 65 components and 0.0891105 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.048860Jy  sigma=0.694863
! Fit after  self-cal, rms=0.048858Jy  sigma=0.694854
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.048858Jy  sigma=0.694854
! Fit after  self-cal, rms=0.048419Jy  sigma=0.692765
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.081 mas, bmaj=2.96 mas, bpa=6.928 degrees
! Estimated noise=0.407666 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000296926 Jy
! Component: 100  -  total flux cleaned = 0.000385018 Jy
! Component: 150  -  total flux cleaned = 0.000421401 Jy
! Component: 200  -  total flux cleaned = 0.000431208 Jy
! Total flux subtracted in 200 components = 0.000431208 Jy
! Clean residual min=-0.002928 max=0.002600 Jy/beam
! Clean residual mean=-0.000007 rms=0.000812 Jy/beam
! Combined flux in latest and established models = 0.0895417 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 73 components and 0.0895417 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.048427Jy  sigma=0.692616
! Fit after  self-cal, rms=0.048428Jy  sigma=0.692576
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.27564e-05 Jy
! Component: 100  -  total flux cleaned = 0.000101906 Jy
! Component: 150  -  total flux cleaned = 0.000101702 Jy
! Component: 200  -  total flux cleaned = 0.00010905 Jy
! Total flux subtracted in 200 components = 0.00010905 Jy
! Clean residual min=-0.002943 max=0.002594 Jy/beam
! Clean residual mean=-0.000007 rms=0.000811 Jy/beam
! Combined flux in latest and established models = 0.0896507 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 78 components and 0.0896507 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.048434Jy  sigma=0.692550
! Fit after  self-cal, rms=0.048434Jy  sigma=0.692544
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.021 mas, bmaj=2.384 mas, bpa=17.4 degrees
! Estimated noise=0.340466 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.021 x 2.384 at 17.4 degrees (North through East)
! Clean map  min=-0.0022861  max=0.054095 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.827 mas, bmaj=2.186 mas, bpa=19.36 degrees
! Estimated noise=0.644039 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0419224 Jy
! Component: 100  -  total flux cleaned = 0.0565901 Jy
! Component: 150  -  total flux cleaned = 0.0650026 Jy
! Component: 200  -  total flux cleaned = 0.070826 Jy
! Total flux subtracted in 200 components = 0.070826 Jy
! Clean residual min=-0.003456 max=0.004289 Jy/beam
! Clean residual mean=-0.000017 rms=0.000874 Jy/beam
! Combined flux in latest and established models = 0.070826 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 22 model components to the UV plane model.
! The established model now contains 22 components and 0.070826 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.021 mas, bmaj=2.384 mas, bpa=17.4 degrees
! Estimated noise=0.340466 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (2.2, 0.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00563438 Jy
! Component: 100  -  total flux cleaned = 0.00922976 Jy
! Component: 150  -  total flux cleaned = 0.0117672 Jy
! Component: 200  -  total flux cleaned = 0.0136441 Jy
! Total flux subtracted in 200 components = 0.0136441 Jy
! Clean residual min=-0.002443 max=0.002246 Jy/beam
! Clean residual mean=-0.000009 rms=0.000563 Jy/beam
! Combined flux in latest and established models = 0.08447 Jy
! Adding 32 model components to the UV plane model.
! The established model now contains 48 components and 0.08447 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.081 mas, bmaj=2.96 mas, bpa=6.928 degrees
! Estimated noise=0.407666 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00214974 Jy
! Component: 100  -  total flux cleaned = 0.0034806 Jy
! Component: 150  -  total flux cleaned = 0.00440834 Jy
! Component: 200  -  total flux cleaned = 0.00508074 Jy
! Total flux subtracted in 200 components = 0.00508074 Jy
! Clean residual min=-0.003044 max=0.002848 Jy/beam
! Clean residual mean=-0.000009 rms=0.000802 Jy/beam
! Combined flux in latest and established models = 0.0895508 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000271414 Jy
! Component: 100  -  total flux cleaned = 0.00046177 Jy
! Component: 150  -  total flux cleaned = 0.000523519 Jy
! Component: 200  -  total flux cleaned = 0.000552023 Jy
! Total flux subtracted in 200 components = 0.000552023 Jy
! Clean residual min=-0.003029 max=0.002786 Jy/beam
! Clean residual mean=-0.000008 rms=0.000796 Jy/beam
! Combined flux in latest and established models = 0.0901028 Jy
! Adding 46 model components to the UV plane model.
! The established model now contains 86 components and 0.0901028 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.021 mas, bmaj=2.384 mas, bpa=17.4 degrees
! Estimated noise=0.340466 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000316805 Jy
! Component: 100  -  total flux cleaned = -0.000441914 Jy
! Component: 150  -  total flux cleaned = -0.000460743 Jy
! Component: 200  -  total flux cleaned = -0.000494372 Jy
! Total flux subtracted in 200 components = -0.000494372 Jy
! Clean residual min=-0.002343 max=0.002027 Jy/beam
! Clean residual mean=-0.000004 rms=0.000515 Jy/beam
! Combined flux in latest and established models = 0.0896084 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 103 components and 0.0896084 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.048394Jy  sigma=0.692046
! Fit after  self-cal, rms=0.048383Jy  sigma=0.691957
wmodel /scr/pima/bp192a1_uvs/J0544+2655_X_map.mod
! Writing 103 model components to file: /scr/pima/bp192a1_uvs/J0544+2655_X_map.mod
wobs /scr/pima/bp192a1_uvs/J0544+2655_X_uvs.fits
! Writing UV FITS file: /scr/pima/bp192a1_uvs/J0544+2655_X_uvs.fits
wwins /scr/pima/bp192a1_uvs/J0544+2655_X_map.win
! wwins: Wrote 3 windows to /scr/pima/bp192a1_uvs/J0544+2655_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000713099 Jy
! Component: 100  -  total flux cleaned = -0.000929421 Jy
! Component: 150  -  total flux cleaned = -0.000997766 Jy
! Component: 200  -  total flux cleaned = -0.00102936 Jy
! Component: 250  -  total flux cleaned = -0.00100169 Jy
! Component: 300  -  total flux cleaned = -0.00102874 Jy
! Component: 350  -  total flux cleaned = -0.00100231 Jy
! Component: 400  -  total flux cleaned = -0.00100251 Jy
! Component: 450  -  total flux cleaned = -0.000979091 Jy
! Component: 500  -  total flux cleaned = -0.000933691 Jy
! Component: 550  -  total flux cleaned = -0.000889847 Jy
! Component: 600  -  total flux cleaned = -0.000785041 Jy
! Component: 650  -  total flux cleaned = -0.000704699 Jy
! Component: 700  -  total flux cleaned = -0.000665771 Jy
! Component: 750  -  total flux cleaned = -0.000684811 Jy
! Component: 800  -  total flux cleaned = -0.000629292 Jy
! Component: 850  -  total flux cleaned = -0.000647045 Jy
! Component: 900  -  total flux cleaned = -0.000629099 Jy
! Component: 950  -  total flux cleaned = -0.000594868 Jy
! Component: 1000  -  total flux cleaned = -0.000595212 Jy
! Component: 1050  -  total flux cleaned = -0.000595465 Jy
! Component: 1100  -  total flux cleaned = -0.000595354 Jy
! Component: 1150  -  total flux cleaned = -0.000579984 Jy
! Component: 1200  -  total flux cleaned = -0.000595278 Jy
! Component: 1250  -  total flux cleaned = -0.000639789 Jy
! Component: 1300  -  total flux cleaned = -0.000639669 Jy
! Component: 1350  -  total flux cleaned = -0.000668186 Jy
! Component: 1400  -  total flux cleaned = -0.000682177 Jy
! Component: 1450  -  total flux cleaned = -0.000723208 Jy
! Component: 1500  -  total flux cleaned = -0.000723205 Jy
! Component: 1550  -  total flux cleaned = -0.000749808 Jy
! Component: 1600  -  total flux cleaned = -0.000814764 Jy
! Component: 1650  -  total flux cleaned = -0.000776202 Jy
! Component: 1700  -  total flux cleaned = -0.000789081 Jy
! Component: 1750  -  total flux cleaned = -0.00080137 Jy
! Component: 1800  -  total flux cleaned = -0.000801311 Jy
! Component: 1850  -  total flux cleaned = -0.000825078 Jy
! Component: 1900  -  total flux cleaned = -0.000777551 Jy
! Component: 1950  -  total flux cleaned = -0.000812634 Jy
! Component: 2000  -  total flux cleaned = -0.00081251 Jy
! Component: 2050  -  total flux cleaned = -0.000823689 Jy
! Component: 2100  -  total flux cleaned = -0.000834824 Jy
! Component: 2150  -  total flux cleaned = -0.000823826 Jy
! Component: 2200  -  total flux cleaned = -0.000856554 Jy
! Component: 2250  -  total flux cleaned = -0.000888795 Jy
! Component: 2300  -  total flux cleaned = -0.000888634 Jy
! Component: 2350  -  total flux cleaned = -0.000909519 Jy
! Component: 2400  -  total flux cleaned = -0.000930263 Jy
! Component: 2450  -  total flux cleaned = -0.000971362 Jy
! Component: 2500  -  total flux cleaned = -0.00100173 Jy
! Component: 2550  -  total flux cleaned = -0.00102159 Jy
! Component: 2600  -  total flux cleaned = -0.00104144 Jy
! Component: 2650  -  total flux cleaned = -0.00102183 Jy
! Component: 2700  -  total flux cleaned = -0.00108008 Jy
! Component: 2750  -  total flux cleaned = -0.00108971 Jy
! Component: 2800  -  total flux cleaned = -0.00113717 Jy
! Component: 2850  -  total flux cleaned = -0.00116524 Jy
! Component: 2900  -  total flux cleaned = -0.00116523 Jy
! Component: 2950  -  total flux cleaned = -0.00121158 Jy
! Component: 3000  -  total flux cleaned = -0.00122075 Jy
! Component: 3050  -  total flux cleaned = -0.00127537 Jy
! Component: 3100  -  total flux cleaned = -0.00127532 Jy
! Component: 3150  -  total flux cleaned = -0.00130218 Jy
! Component: 3200  -  total flux cleaned = -0.00133775 Jy
! Component: 3250  -  total flux cleaned = -0.0013729 Jy
! Component: 3300  -  total flux cleaned = -0.00140774 Jy
! Component: 3350  -  total flux cleaned = -0.00142507 Jy
! Component: 3400  -  total flux cleaned = -0.00142513 Jy
! Component: 3450  -  total flux cleaned = -0.00144228 Jy
! Component: 3500  -  total flux cleaned = -0.00147614 Jy
! Component: 3550  -  total flux cleaned = -0.00149289 Jy
! Component: 3600  -  total flux cleaned = -0.00150956 Jy
! Component: 3650  -  total flux cleaned = -0.00153447 Jy
! Component: 3700  -  total flux cleaned = -0.00153443 Jy
! Component: 3750  -  total flux cleaned = -0.00155077 Jy
! Component: 3800  -  total flux cleaned = -0.00155073 Jy
! Component: 3850  -  total flux cleaned = -0.00153447 Jy
! Component: 3900  -  total flux cleaned = -0.00154249 Jy
! Component: 3950  -  total flux cleaned = -0.00155846 Jy
! Component: 4000  -  total flux cleaned = -0.00154253 Jy
! Component: 4050  -  total flux cleaned = -0.00151088 Jy
! Total flux subtracted in 4096 components = -0.00152661 Jy
! Clean residual min=-0.000644 max=0.000456 Jy/beam
! Clean residual mean=0.000001 rms=0.000137 Jy/beam
! Combined flux in latest and established models = 0.0880818 Jy
keep
! Adding 301 model components to the UV plane model.
! The established model now contains 404 components and 0.0880818 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bp192a1_uvs/J0544+2655_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.021 x 2.384 at 17.4 degrees (North through East)
! Clean map  min=-0.00084329  max=0.053887 Jy/beam
! Writing clean map to FITS file: /scr/pima/bp192a1_uvs/J0544+2655_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0538873 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000132561 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.737988 0.737988 1.47598 2.95195 5.90391 11.8078 23.6156 47.2313 94.4625
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0003 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.053 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  406.51 
quit
! Quitting program
! Log file /scr/pima/bp192a1_uvs/J0544+2655_X_uvs.log closed on Wed Sep 16 13:32:05 2015