! Started logfile: /scr/pima/bp192a1_uvs/J0544+2655_C_uvs.log on Wed Sep 16 13:32:40 2015
obs /scr/pima/bp192a1_uvs/J0544+2655_C_uva.fits
! Reading UV FITS file: /scr/pima/bp192a1_uvs/J0544+2655_C_uva.fits
! AN table 1: 33 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.924579 visibilities/baseline/integration-bin.
! Found source: J0544+2655
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    4.128e+09      3.2e+07          1      3.2e+07
!  02        2     4.16e+09      3.2e+07          1      3.2e+07
!  03        3    4.192e+09      3.2e+07          1      3.2e+07
!  04        4    4.224e+09      3.2e+07          1      3.2e+07
!  05        5    4.416e+09      3.2e+07          1      3.2e+07
!  06        6    4.512e+09      3.2e+07          1      3.2e+07
!  07        7    4.544e+09      3.2e+07          1      3.2e+07
!  08        8    4.576e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 10984 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.3 
print "taper_size =", taper_size
! taper_size = 40 
![@/home/lpetrov/bin/01_muppet /scr/pima/bp192a1_uvs/J0544+2655_C]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.004730Jy  sigma=24.814143
! Fit after  self-cal, rms=0.954437Jy  sigma=23.546055
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.447 mas, bmaj=3.803 mas, bpa=18.85 degrees
! Estimated noise=0.530615 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.031453 Jy
! Component: 100  -  total flux cleaned = 0.0424188 Jy
! Total flux subtracted in 100 components = 0.0424188 Jy
! Clean residual min=-0.005866 max=0.015370 Jy/beam
! Clean residual mean=0.000007 rms=0.001539 Jy/beam
! Combined flux in latest and established models = 0.0424189 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 19 components and 0.0424189 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.049306Jy  sigma=1.006436
! Fit after  self-cal, rms=0.048299Jy  sigma=0.980160
! Inverting map 
! Added new window around map position (2.7, -1.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0144711 Jy
! Component: 100  -  total flux cleaned = 0.0218927 Jy
! Total flux subtracted in 100 components = 0.0218927 Jy
! Clean residual min=-0.003947 max=0.005822 Jy/beam
! Clean residual mean=0.000001 rms=0.000967 Jy/beam
! Combined flux in latest and established models = 0.0643116 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 35 components and 0.0643116 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.042688Jy  sigma=0.802313
! Fit after  self-cal, rms=0.041850Jy  sigma=0.779759
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00682523 Jy
! Component: 100  -  total flux cleaned = 0.0111552 Jy
! Total flux subtracted in 100 components = 0.0111552 Jy
! Clean residual min=-0.002825 max=0.003268 Jy/beam
! Clean residual mean=-0.000001 rms=0.000643 Jy/beam
! Combined flux in latest and established models = 0.0754668 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 45 components and 0.0754668 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.040106Jy  sigma=0.723855
! Fit after  self-cal, rms=0.040027Jy  sigma=0.721195
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.787 mas, bmaj=4.188 mas, bpa=17.16 degrees
! Estimated noise=0.278572 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00535833 Jy
! Component: 100  -  total flux cleaned = 0.00840617 Jy
! Component: 150  -  total flux cleaned = 0.0103988 Jy
! Component: 200  -  total flux cleaned = 0.0117671 Jy
! Total flux subtracted in 200 components = 0.0117671 Jy
! Clean residual min=-0.002322 max=0.002409 Jy/beam
! Clean residual mean=-0.000004 rms=0.000546 Jy/beam
! Combined flux in latest and established models = 0.087234 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 70 components and 0.0872339 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.039176Jy  sigma=0.698249
! Fit after  self-cal, rms=0.039148Jy  sigma=0.696799
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.787 x 4.188 at 17.16 degrees (North through East)
! Clean map  min=-0.0022586  max=0.044619 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.93     FD        1.20     HN        1.03     KP        0.84     
!   LA        1.06     MK        1.14     NL        0.96     OV        0.99     
!   PT        0.87     SC        1.09     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.15     HN        1.06     KP        0.91     
!   LA        1.09     MK        0.95     NL        1.05     OV        0.98     
!   PT        0.95     SC        1.06     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        1.03     HN        1.06     KP        0.86     
!   LA        1.03     MK        1.03     NL        1.05     OV        1.01     
!   PT        0.94     SC        1.09     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 5.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.00     HN        0.92     KP        0.94     
!   LA        1.06     MK        1.07     NL        1.11     OV        0.95     
!   PT        0.91     SC        1.01     
! 
! 
! Correcting IF 6.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.01     HN        0.99     KP        0.90     
!   LA        1.17     MK        0.99     NL        1.01     OV        0.95     
!   PT        1.03     SC        0.98     
! 
! 
! Correcting IF 7.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.94     HN        0.87     KP        0.92     
!   LA        1.11     MK        0.99     NL        1.07     OV        0.95     
!   PT        0.96     SC        0.89     
! 
! 
! Correcting IF 8.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.95     HN        0.92     KP        0.93     
!   LA        1.13     MK        0.95     NL        0.97     OV        0.99     
!   PT        0.92     SC        0.92     
! 
! 
! Fit before self-cal, rms=0.039148Jy  sigma=0.696799
! Fit after  self-cal, rms=0.038726Jy  sigma=0.682349
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.782 mas, bmaj=4.18 mas, bpa=17.06 degrees
! Estimated noise=0.276461 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000548979 Jy
! Component: 100  -  total flux cleaned = 0.000718197 Jy
! Component: 150  -  total flux cleaned = 0.000899027 Jy
! Component: 200  -  total flux cleaned = 0.000982166 Jy
! Total flux subtracted in 200 components = 0.000982166 Jy
! Clean residual min=-0.001157 max=0.001126 Jy/beam
! Clean residual mean=-0.000001 rms=0.000269 Jy/beam
! Combined flux in latest and established models = 0.0882161 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 76 components and 0.0882161 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.038677Jy  sigma=0.680903
! Fit after  self-cal, rms=0.038690Jy  sigma=0.680404
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.038690Jy  sigma=0.680404
! Fit after  self-cal, rms=0.038700Jy  sigma=0.680253
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.775 mas, bmaj=4.176 mas, bpa=17.09 degrees
! Estimated noise=0.277445 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000522701 Jy
! Component: 100  -  total flux cleaned = 0.000652989 Jy
! Component: 150  -  total flux cleaned = 0.000771483 Jy
! Component: 200  -  total flux cleaned = 0.000808135 Jy
! Total flux subtracted in 200 components = 0.000808135 Jy
! Clean residual min=-0.001102 max=0.001087 Jy/beam
! Clean residual mean=-0.000001 rms=0.000258 Jy/beam
! Combined flux in latest and established models = 0.0890242 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 88 components and 0.0890243 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.038678Jy  sigma=0.679750
! Fit after  self-cal, rms=0.038677Jy  sigma=0.679646
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-24.6, 66.9).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000566301 Jy
! Component: 100  -  total flux cleaned = 0.000684583 Jy
! Component: 150  -  total flux cleaned = 0.000720938 Jy
! Component: 200  -  total flux cleaned = 0.000736342 Jy
! Total flux subtracted in 200 components = 0.000736342 Jy
! Clean residual min=-0.001027 max=0.000917 Jy/beam
! Clean residual mean=-0.000001 rms=0.000239 Jy/beam
! Combined flux in latest and established models = 0.0897606 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 104 components and 0.0897606 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.038643Jy  sigma=0.678615
! Fit after  self-cal, rms=0.038637Jy  sigma=0.678545
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.038637Jy  sigma=0.678545
! Fit after  self-cal, rms=0.038729Jy  sigma=0.678439
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.771 mas, bmaj=4.173 mas, bpa=17.12 degrees
! Estimated noise=0.278593 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000500148 Jy
! Component: 100  -  total flux cleaned = 0.00063786 Jy
! Component: 150  -  total flux cleaned = 0.000689632 Jy
! Component: 200  -  total flux cleaned = 0.000761214 Jy
! Total flux subtracted in 200 components = 0.000761214 Jy
! Clean residual min=-0.000995 max=0.000860 Jy/beam
! Clean residual mean=-0.000001 rms=0.000237 Jy/beam
! Combined flux in latest and established models = 0.0905218 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 111 components and 0.0905218 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.038715Jy  sigma=0.678132
! Fit after  self-cal, rms=0.038714Jy  sigma=0.678108
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000127961 Jy
! Component: 100  -  total flux cleaned = 0.000182253 Jy
! Component: 150  -  total flux cleaned = 0.000201824 Jy
! Component: 200  -  total flux cleaned = 0.000210783 Jy
! Total flux subtracted in 200 components = 0.000210783 Jy
! Clean residual min=-0.000977 max=0.000834 Jy/beam
! Clean residual mean=-0.000001 rms=0.000234 Jy/beam
! Combined flux in latest and established models = 0.0907326 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 117 components and 0.0907326 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.038708Jy  sigma=0.677950
! Fit after  self-cal, rms=0.038708Jy  sigma=0.677937
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.038708Jy  sigma=0.677937
! Fit after  self-cal, rms=0.038761Jy  sigma=0.677870
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.578 mas, bmaj=5.256 mas, bpa=6.453 degrees
! Estimated noise=0.340103 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000272413 Jy
! Component: 100  -  total flux cleaned = 0.00045995 Jy
! Component: 150  -  total flux cleaned = 0.000619027 Jy
! Component: 200  -  total flux cleaned = 0.000746229 Jy
! Total flux subtracted in 200 components = 0.000746229 Jy
! Clean residual min=-0.001115 max=0.000995 Jy/beam
! Clean residual mean=-0.000002 rms=0.000302 Jy/beam
! Combined flux in latest and established models = 0.0914788 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 130 components and 0.0914788 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.038757Jy  sigma=0.677830
! Fit after  self-cal, rms=0.038755Jy  sigma=0.677814
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000139511 Jy
! Component: 100  -  total flux cleaned = 0.000169338 Jy
! Component: 150  -  total flux cleaned = 0.000183241 Jy
! Component: 200  -  total flux cleaned = 0.000196271 Jy
! Total flux subtracted in 200 components = 0.000196271 Jy
! Clean residual min=-0.001094 max=0.000987 Jy/beam
! Clean residual mean=-0.000002 rms=0.000299 Jy/beam
! Combined flux in latest and established models = 0.0916751 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 142 components and 0.0916751 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.038753Jy  sigma=0.677777
! Fit after  self-cal, rms=0.038752Jy  sigma=0.677774
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.767 mas, bmaj=4.169 mas, bpa=17.15 degrees
! Estimated noise=0.279342 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.767 x 4.169 at 17.15 degrees (North through East)
! Clean map  min=-0.00091554  max=0.043978 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.442 mas, bmaj=3.777 mas, bpa=18.86 degrees
! Estimated noise=0.531426 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0353236 Jy
! Component: 100  -  total flux cleaned = 0.0513913 Jy
! Component: 150  -  total flux cleaned = 0.0610552 Jy
! Component: 200  -  total flux cleaned = 0.0679442 Jy
! Total flux subtracted in 200 components = 0.0679442 Jy
! Clean residual min=-0.002627 max=0.003877 Jy/beam
! Clean residual mean=0.000005 rms=0.000680 Jy/beam
! Combined flux in latest and established models = 0.0679442 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 21 model components to the UV plane model.
! The established model now contains 21 components and 0.0679442 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.767 mas, bmaj=4.169 mas, bpa=17.15 degrees
! Estimated noise=0.279342 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00784159 Jy
! Component: 100  -  total flux cleaned = 0.0124776 Jy
! Component: 150  -  total flux cleaned = 0.0153979 Jy
! Component: 200  -  total flux cleaned = 0.0173396 Jy
! Total flux subtracted in 200 components = 0.0173396 Jy
! Clean residual min=-0.001216 max=0.001351 Jy/beam
! Clean residual mean=0.000001 rms=0.000338 Jy/beam
! Combined flux in latest and established models = 0.0852838 Jy
! Adding 48 model components to the UV plane model.
! The established model now contains 61 components and 0.0852838 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.578 mas, bmaj=5.256 mas, bpa=6.453 degrees
! Estimated noise=0.340103 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00220941 Jy
! Component: 100  -  total flux cleaned = 0.00350726 Jy
! Component: 150  -  total flux cleaned = 0.00421737 Jy
! Component: 200  -  total flux cleaned = 0.00466764 Jy
! Total flux subtracted in 200 components = 0.00466764 Jy
! Clean residual min=-0.001188 max=0.001113 Jy/beam
! Clean residual mean=-0.000002 rms=0.000331 Jy/beam
! Combined flux in latest and established models = 0.0899514 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000369338 Jy
! Component: 100  -  total flux cleaned = 0.000602379 Jy
! Component: 150  -  total flux cleaned = 0.000727845 Jy
! Component: 200  -  total flux cleaned = 0.000853677 Jy
! Total flux subtracted in 200 components = 0.000853677 Jy
! Clean residual min=-0.001104 max=0.001053 Jy/beam
! Clean residual mean=-0.000002 rms=0.000310 Jy/beam
! Combined flux in latest and established models = 0.0908051 Jy
! Adding 63 model components to the UV plane model.
! The established model now contains 112 components and 0.0908051 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.767 mas, bmaj=4.169 mas, bpa=17.15 degrees
! Estimated noise=0.279342 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000118126 Jy
! Component: 100  -  total flux cleaned = 0.000175318 Jy
! Component: 150  -  total flux cleaned = 0.000223932 Jy
! Component: 200  -  total flux cleaned = 0.000237839 Jy
! Total flux subtracted in 200 components = 0.000237839 Jy
! Clean residual min=-0.001010 max=0.000935 Jy/beam
! Clean residual mean=-0.000001 rms=0.000236 Jy/beam
! Combined flux in latest and established models = 0.0910429 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 133 components and 0.0910429 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.038759Jy  sigma=0.678032
! Fit after  self-cal, rms=0.038766Jy  sigma=0.677911
wmodel /scr/pima/bp192a1_uvs/J0544+2655_C_map.mod
! Writing 133 model components to file: /scr/pima/bp192a1_uvs/J0544+2655_C_map.mod
wobs /scr/pima/bp192a1_uvs/J0544+2655_C_uvs.fits
! Writing UV FITS file: /scr/pima/bp192a1_uvs/J0544+2655_C_uvs.fits
wwins /scr/pima/bp192a1_uvs/J0544+2655_C_map.win
! wwins: Wrote 3 windows to /scr/pima/bp192a1_uvs/J0544+2655_C_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00020049 Jy
! Component: 100  -  total flux cleaned = -0.00029593 Jy
! Component: 150  -  total flux cleaned = -0.000250958 Jy
! Component: 200  -  total flux cleaned = -0.00020761 Jy
! Component: 250  -  total flux cleaned = -0.000111186 Jy
! Component: 300  -  total flux cleaned = -5.79055e-05 Jy
! Component: 350  -  total flux cleaned = -7.09975e-05 Jy
! Component: 400  -  total flux cleaned = -2.05577e-05 Jy
! Component: 450  -  total flux cleaned = 1.60404e-05 Jy
! Component: 500  -  total flux cleaned = 3.96961e-06 Jy
! Component: 550  -  total flux cleaned = 1.54871e-05 Jy
! Component: 600  -  total flux cleaned = 4.97441e-05 Jy
! Component: 650  -  total flux cleaned = 6.09142e-05 Jy
! Component: 700  -  total flux cleaned = 6.08139e-05 Jy
! Component: 750  -  total flux cleaned = 8.2168e-05 Jy
! Component: 800  -  total flux cleaned = 6.10243e-05 Jy
! Component: 850  -  total flux cleaned = 5.06111e-05 Jy
! Component: 900  -  total flux cleaned = 3.03944e-05 Jy
! Component: 950  -  total flux cleaned = 2.03789e-05 Jy
! Component: 1000  -  total flux cleaned = 2.0348e-05 Jy
! Component: 1050  -  total flux cleaned = 1.08454e-05 Jy
! Component: 1100  -  total flux cleaned = -8.13788e-06 Jy
! Component: 1150  -  total flux cleaned = -8.12573e-06 Jy
! Component: 1200  -  total flux cleaned = -1.72847e-05 Jy
! Component: 1250  -  total flux cleaned = -1.70383e-05 Jy
! Component: 1300  -  total flux cleaned = -8.02372e-06 Jy
! Component: 1350  -  total flux cleaned = 1.8359e-05 Jy
! Component: 1400  -  total flux cleaned = 2.70789e-05 Jy
! Component: 1450  -  total flux cleaned = 7.83327e-05 Jy
! Component: 1500  -  total flux cleaned = 7.00451e-05 Jy
! Component: 1550  -  total flux cleaned = 0.000111531 Jy
! Component: 1600  -  total flux cleaned = 0.000111479 Jy
! Component: 1650  -  total flux cleaned = 0.000135623 Jy
! Component: 1700  -  total flux cleaned = 0.000135396 Jy
! Component: 1750  -  total flux cleaned = 0.000127405 Jy
! Component: 1800  -  total flux cleaned = 0.000127377 Jy
! Component: 1850  -  total flux cleaned = 0.000150281 Jy
! Component: 1900  -  total flux cleaned = 0.000119708 Jy
! Component: 1950  -  total flux cleaned = 0.000134869 Jy
! Component: 2000  -  total flux cleaned = 0.000157245 Jy
! Component: 2050  -  total flux cleaned = 0.000142493 Jy
! Component: 2100  -  total flux cleaned = 0.000157154 Jy
! Component: 2150  -  total flux cleaned = 0.000157136 Jy
! Component: 2200  -  total flux cleaned = 0.000164275 Jy
! Component: 2250  -  total flux cleaned = 0.000178226 Jy
! Component: 2300  -  total flux cleaned = 0.000171231 Jy
! Component: 2350  -  total flux cleaned = 0.000164289 Jy
! Component: 2400  -  total flux cleaned = 0.000164304 Jy
! Component: 2450  -  total flux cleaned = 0.00015076 Jy
! Component: 2500  -  total flux cleaned = 0.000157498 Jy
! Component: 2550  -  total flux cleaned = 0.000144205 Jy
! Component: 2600  -  total flux cleaned = 0.00013109 Jy
! Component: 2650  -  total flux cleaned = 0.000131124 Jy
! Component: 2700  -  total flux cleaned = 0.000118152 Jy
! Component: 2750  -  total flux cleaned = 0.000111714 Jy
! Component: 2800  -  total flux cleaned = 0.000111809 Jy
! Component: 2850  -  total flux cleaned = 8.67281e-05 Jy
! Component: 2900  -  total flux cleaned = 0.00012399 Jy
! Component: 2950  -  total flux cleaned = 0.000117792 Jy
! Component: 3000  -  total flux cleaned = 9.34118e-05 Jy
! Component: 3050  -  total flux cleaned = 9.95224e-05 Jy
! Component: 3100  -  total flux cleaned = 7.55616e-05 Jy
! Component: 3150  -  total flux cleaned = 6.97252e-05 Jy
! Component: 3200  -  total flux cleaned = 8.15452e-05 Jy
! Component: 3250  -  total flux cleaned = 8.15875e-05 Jy
! Component: 3300  -  total flux cleaned = 5.27059e-05 Jy
! Component: 3350  -  total flux cleaned = 7.00136e-05 Jy
! Component: 3400  -  total flux cleaned = 7.00212e-05 Jy
! Component: 3450  -  total flux cleaned = 3.61384e-05 Jy
! Component: 3500  -  total flux cleaned = 5.86384e-05 Jy
! Component: 3550  -  total flux cleaned = 5.86808e-05 Jy
! Component: 3600  -  total flux cleaned = 7.5169e-05 Jy
! Component: 3650  -  total flux cleaned = 5.3279e-05 Jy
! Component: 3700  -  total flux cleaned = 5.33523e-05 Jy
! Component: 3750  -  total flux cleaned = 4.80549e-05 Jy
! Component: 3800  -  total flux cleaned = 6.94731e-05 Jy
! Component: 3850  -  total flux cleaned = 9.59648e-05 Jy
! Component: 3900  -  total flux cleaned = 0.000101187 Jy
! Component: 3950  -  total flux cleaned = 0.000116824 Jy
! Component: 4000  -  total flux cleaned = 0.000111621 Jy
! Component: 4050  -  total flux cleaned = 0.00011679 Jy
! Total flux subtracted in 4096 components = 0.000121929 Jy
! Clean residual min=-0.000306 max=0.000383 Jy/beam
! Clean residual mean=0.000000 rms=0.000090 Jy/beam
! Combined flux in latest and established models = 0.0911649 Jy
keep
! Adding 292 model components to the UV plane model.
! The established model now contains 425 components and 0.0911648 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bp192a1_uvs/J0544+2655_C\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.767 x 4.169 at 17.15 degrees (North through East)
! Clean map  min=-0.00062176  max=0.044082 Jy/beam
! Writing clean map to FITS file: /scr/pima/bp192a1_uvs/J0544+2655_C_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.044082 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 8.81506e-05 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.599909 0.599909 1.19982 2.39964 4.79927 9.59854 19.1971 38.3942 76.7884
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0002 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.044 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  500.075 
quit
! Quitting program
! Log file /scr/pima/bp192a1_uvs/J0544+2655_C_uvs.log closed on Wed Sep 16 13:32:45 2015