! Started logfile: /scr/pima/bp192a1_uvs/J0543+3023_C_uvs.log on Wed Sep 16 13:32:35 2015
obs /scr/pima/bp192a1_uvs/J0543+3023_C_uva.fits
! Reading UV FITS file: /scr/pima/bp192a1_uvs/J0543+3023_C_uva.fits
! AN table 1: 48 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.809259 visibilities/baseline/integration-bin.
! Found source: J0543+3023
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    4.128e+09      3.2e+07          1      3.2e+07
!  02        2     4.16e+09      3.2e+07          1      3.2e+07
!  03        3    4.192e+09      3.2e+07          1      3.2e+07
!  04        4    4.224e+09      3.2e+07          1      3.2e+07
!  05        5    4.416e+09      3.2e+07          1      3.2e+07
!  06        6    4.512e+09      3.2e+07          1      3.2e+07
!  07        7    4.544e+09      3.2e+07          1      3.2e+07
!  08        8    4.576e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 13984 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.3 
print "taper_size =", taper_size
! taper_size = 40 
![@/home/lpetrov/bin/01_muppet /scr/pima/bp192a1_uvs/J0543+3023_C]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 65 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 65 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 65 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 65 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 65 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 65 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 65 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 65 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.006112Jy  sigma=25.209635
! Fit after  self-cal, rms=0.907550Jy  sigma=22.794718
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.437 mas, bmaj=3.99 mas, bpa=22.45 degrees
! Estimated noise=0.417533 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0706945 Jy
! Component: 100  -  total flux cleaned = 0.0861248 Jy
! Total flux subtracted in 100 components = 0.0861248 Jy
! Clean residual min=-0.002719 max=0.004374 Jy/beam
! Clean residual mean=0.000001 rms=0.000693 Jy/beam
! Combined flux in latest and established models = 0.0861248 Jy
! Performing phase self-cal
! Adding 3 model components to the UV plane model.
! The established model now contains 3 components and 0.0861248 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.034236Jy  sigma=0.749919
! Fit after  self-cal, rms=0.034119Jy  sigma=0.749192
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00431965 Jy
! Component: 100  -  total flux cleaned = 0.00635137 Jy
! Total flux subtracted in 100 components = 0.00635137 Jy
! Clean residual min=-0.002765 max=0.002912 Jy/beam
! Clean residual mean=-0.000003 rms=0.000615 Jy/beam
! Combined flux in latest and established models = 0.0924762 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 12 components and 0.0924762 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.033299Jy  sigma=0.732608
! Fit after  self-cal, rms=0.033300Jy  sigma=0.732525
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.832 mas, bmaj=4.37 mas, bpa=20.68 degrees
! Estimated noise=0.242182 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00167814 Jy
! Component: 100  -  total flux cleaned = 0.00252917 Jy
! Component: 150  -  total flux cleaned = 0.00306632 Jy
! Component: 200  -  total flux cleaned = 0.00341769 Jy
! Total flux subtracted in 200 components = 0.00341769 Jy
! Clean residual min=-0.002791 max=0.002908 Jy/beam
! Clean residual mean=-0.000005 rms=0.000667 Jy/beam
! Combined flux in latest and established models = 0.0958939 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 29 components and 0.0958939 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.033169Jy  sigma=0.731660
! Fit after  self-cal, rms=0.033172Jy  sigma=0.731653
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.832 x 4.37 at 20.68 degrees (North through East)
! Clean map  min=-0.0027456  max=0.091976 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.16     HN        0.98     KP        0.86     
!   LA        1.08     MK        1.07     NL        1.02     OV        0.97     
!   PT        0.88     SC        0.98     
! 
! 
! Correcting IF 2.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.15     HN        0.97     KP        0.91     
!   LA        1.10     MK        0.98     NL        1.07     OV        0.99     
!   PT        0.96     SC        0.98     
! 
! 
! Correcting IF 3.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.99     HN        0.97     KP        0.89     
!   LA        1.07     MK        0.98     NL        1.04     OV        0.99     
!   PT        0.95     SC        0.96     
! 
! 
! Correcting IF 4.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 5.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.00     HN        0.98     KP        0.95     
!   LA        1.08     MK        1.01     NL        1.13     OV        0.96     
!   PT        0.90     SC        1.02     
! 
! 
! Correcting IF 6.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 7.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.92     HN        0.99     KP        0.92     
!   LA        1.13     MK        0.99     NL        1.04     OV        0.97     
!   PT        0.95     SC        0.95     
! 
! 
! Correcting IF 8.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        0.97     HN        0.98     KP        0.93     
!   LA        1.13     MK        1.00     NL        1.01     OV        0.97     
!   PT        0.95     SC        1.01     
! 
! 
! Fit before self-cal, rms=0.033172Jy  sigma=0.731653
! Fit after  self-cal, rms=0.032239Jy  sigma=0.710019
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.825 mas, bmaj=4.381 mas, bpa=20.78 degrees
! Estimated noise=0.241765 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000322815 Jy
! Component: 100  -  total flux cleaned = -0.000342557 Jy
! Component: 150  -  total flux cleaned = -0.000359162 Jy
! Component: 200  -  total flux cleaned = -0.000373965 Jy
! Total flux subtracted in 200 components = -0.000373965 Jy
! Clean residual min=-0.001405 max=0.001518 Jy/beam
! Clean residual mean=-0.000002 rms=0.000328 Jy/beam
! Combined flux in latest and established models = 0.0955199 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 40 components and 0.0955199 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.032231Jy  sigma=0.709837
! Fit after  self-cal, rms=0.032225Jy  sigma=0.709717
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.032225Jy  sigma=0.709717
! Fit after  self-cal, rms=0.032212Jy  sigma=0.709687
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.824 mas, bmaj=4.383 mas, bpa=20.81 degrees
! Estimated noise=0.24163 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000122274 Jy
! Component: 100  -  total flux cleaned = -0.00015249 Jy
! Component: 150  -  total flux cleaned = -0.00016563 Jy
! Component: 200  -  total flux cleaned = -0.000177538 Jy
! Total flux subtracted in 200 components = -0.000177538 Jy
! Clean residual min=-0.001386 max=0.001516 Jy/beam
! Clean residual mean=-0.000002 rms=0.000326 Jy/beam
! Combined flux in latest and established models = 0.0953424 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 46 components and 0.0953424 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.032208Jy  sigma=0.709598
! Fit after  self-cal, rms=0.032208Jy  sigma=0.709597
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (46.5, -23.1).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000978379 Jy
! Component: 100  -  total flux cleaned = 0.00109891 Jy
! Component: 150  -  total flux cleaned = 0.0010673 Jy
! Component: 200  -  total flux cleaned = 0.00102834 Jy
! Total flux subtracted in 200 components = 0.00102834 Jy
! Clean residual min=-0.001309 max=0.001259 Jy/beam
! Clean residual mean=-0.000003 rms=0.000304 Jy/beam
! Combined flux in latest and established models = 0.0963707 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 64 components and 0.0963707 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.032159Jy  sigma=0.708296
! Fit after  self-cal, rms=0.032154Jy  sigma=0.708195
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.032154Jy  sigma=0.708195
! Fit after  self-cal, rms=0.032136Jy  sigma=0.708074
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.822 mas, bmaj=4.385 mas, bpa=20.85 degrees
! Estimated noise=0.241574 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000313149 Jy
! Component: 100  -  total flux cleaned = 0.000255829 Jy
! Component: 150  -  total flux cleaned = 0.000176428 Jy
! Component: 200  -  total flux cleaned = 9.68125e-05 Jy
! Total flux subtracted in 200 components = 9.68125e-05 Jy
! Clean residual min=-0.001309 max=0.001362 Jy/beam
! Clean residual mean=-0.000004 rms=0.000315 Jy/beam
! Combined flux in latest and established models = 0.0964676 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 75 components and 0.0964676 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.032127Jy  sigma=0.707838
! Fit after  self-cal, rms=0.032127Jy  sigma=0.707828
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (10.8, 61.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00125462 Jy
! Component: 100  -  total flux cleaned = 0.00152016 Jy
! Component: 150  -  total flux cleaned = 0.00142182 Jy
! Component: 200  -  total flux cleaned = 0.00134695 Jy
! Total flux subtracted in 200 components = 0.00134695 Jy
! Clean residual min=-0.001269 max=0.001007 Jy/beam
! Clean residual mean=-0.000003 rms=0.000280 Jy/beam
! Combined flux in latest and established models = 0.0978145 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 102 components and 0.0978145 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.032072Jy  sigma=0.706541
! Fit after  self-cal, rms=0.032066Jy  sigma=0.706457
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.032066Jy  sigma=0.706457
! Fit after  self-cal, rms=0.032050Jy  sigma=0.698629
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.711 mas, bmaj=5.32 mas, bpa=11.26 degrees
! Estimated noise=0.290654 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000333531 Jy
! Component: 100  -  total flux cleaned = 0.00019269 Jy
! Component: 150  -  total flux cleaned = 0.000122486 Jy
! Component: 200  -  total flux cleaned = 7.74257e-05 Jy
! Total flux subtracted in 200 components = 7.74257e-05 Jy
! Clean residual min=-0.001048 max=0.001071 Jy/beam
! Clean residual mean=-0.000005 rms=0.000303 Jy/beam
! Combined flux in latest and established models = 0.0978919 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 122 components and 0.0978919 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.032034Jy  sigma=0.698371
! Fit after  self-cal, rms=0.032032Jy  sigma=0.698339
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.48026e-05 Jy
! Component: 100  -  total flux cleaned = -0.000130725 Jy
! Component: 150  -  total flux cleaned = -0.000139023 Jy
! Component: 200  -  total flux cleaned = -0.000139014 Jy
! Total flux subtracted in 200 components = -0.000139014 Jy
! Clean residual min=-0.000995 max=0.001060 Jy/beam
! Clean residual mean=-0.000005 rms=0.000299 Jy/beam
! Combined flux in latest and established models = 0.0977529 Jy
! Performing phase self-cal
! Adding 38 model components to the UV plane model.
! The established model now contains 143 components and 0.0977529 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.032028Jy  sigma=0.698274
! Fit after  self-cal, rms=0.032027Jy  sigma=0.698273
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.821 mas, bmaj=4.386 mas, bpa=20.84 degrees
! Estimated noise=0.243638 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.821 x 4.386 at 20.84 degrees (North through East)
! Clean map  min=-0.00093016  max=0.092052 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.431 mas, bmaj=3.993 mas, bpa=22.43 degrees
! Estimated noise=0.441885 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0712562 Jy
! Component: 100  -  total flux cleaned = 0.0868918 Jy
! Component: 150  -  total flux cleaned = 0.0916352 Jy
! Component: 200  -  total flux cleaned = 0.09424 Jy
! Total flux subtracted in 200 components = 0.09424 Jy
! Clean residual min=-0.001660 max=0.001779 Jy/beam
! Clean residual mean=-0.000000 rms=0.000412 Jy/beam
! Combined flux in latest and established models = 0.09424 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 14 model components to the UV plane model.
! The established model now contains 14 components and 0.09424 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.821 mas, bmaj=4.386 mas, bpa=20.84 degrees
! Estimated noise=0.243638 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00196224 Jy
! Component: 100  -  total flux cleaned = 0.00291275 Jy
! Component: 150  -  total flux cleaned = 0.00341855 Jy
! Component: 200  -  total flux cleaned = 0.00358044 Jy
! Total flux subtracted in 200 components = 0.00358044 Jy
! Clean residual min=-0.000963 max=0.001031 Jy/beam
! Clean residual mean=-0.000003 rms=0.000250 Jy/beam
! Combined flux in latest and established models = 0.0978205 Jy
! Adding 26 model components to the UV plane model.
! The established model now contains 37 components and 0.0978205 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.711 mas, bmaj=5.32 mas, bpa=11.26 degrees
! Estimated noise=0.290654 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00019584 Jy
! Component: 100  -  total flux cleaned = 0.00032448 Jy
! Component: 150  -  total flux cleaned = 0.000308616 Jy
! Component: 200  -  total flux cleaned = 0.000261536 Jy
! Total flux subtracted in 200 components = 0.000261536 Jy
! Clean residual min=-0.001038 max=0.001108 Jy/beam
! Clean residual mean=-0.000006 rms=0.000307 Jy/beam
! Combined flux in latest and established models = 0.098082 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.62785e-05 Jy
! Component: 100  -  total flux cleaned = -9.495e-05 Jy
! Component: 150  -  total flux cleaned = -0.000142133 Jy
! Component: 200  -  total flux cleaned = -0.000174669 Jy
! Total flux subtracted in 200 components = -0.000174669 Jy
! Clean residual min=-0.001030 max=0.001078 Jy/beam
! Clean residual mean=-0.000005 rms=0.000302 Jy/beam
! Combined flux in latest and established models = 0.0979073 Jy
! Adding 54 model components to the UV plane model.
! The established model now contains 79 components and 0.0979073 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.821 mas, bmaj=4.386 mas, bpa=20.84 degrees
! Estimated noise=0.243638 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000247082 Jy
! Component: 100  -  total flux cleaned = -0.000359865 Jy
! Component: 150  -  total flux cleaned = -0.000372395 Jy
! Component: 200  -  total flux cleaned = -0.000383959 Jy
! Total flux subtracted in 200 components = -0.000383959 Jy
! Clean residual min=-0.000971 max=0.000902 Jy/beam
! Clean residual mean=-0.000003 rms=0.000231 Jy/beam
! Combined flux in latest and established models = 0.0975234 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 105 components and 0.0975234 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.032029Jy  sigma=0.698330
! Fit after  self-cal, rms=0.032029Jy  sigma=0.698321
wmodel /scr/pima/bp192a1_uvs/J0543+3023_C_map.mod
! Writing 105 model components to file: /scr/pima/bp192a1_uvs/J0543+3023_C_map.mod
wobs /scr/pima/bp192a1_uvs/J0543+3023_C_uvs.fits
! Writing UV FITS file: /scr/pima/bp192a1_uvs/J0543+3023_C_uvs.fits
wwins /scr/pima/bp192a1_uvs/J0543+3023_C_map.win
! wwins: Wrote 3 windows to /scr/pima/bp192a1_uvs/J0543+3023_C_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000289604 Jy
! Component: 100  -  total flux cleaned = -0.000243593 Jy
! Component: 150  -  total flux cleaned = -0.000243277 Jy
! Component: 200  -  total flux cleaned = -0.00022851 Jy
! Component: 250  -  total flux cleaned = -0.000228339 Jy
! Component: 300  -  total flux cleaned = -0.0002415 Jy
! Component: 350  -  total flux cleaned = -0.000228604 Jy
! Component: 400  -  total flux cleaned = -0.00024094 Jy
! Component: 450  -  total flux cleaned = -0.000241053 Jy
! Component: 500  -  total flux cleaned = -0.000229275 Jy
! Component: 550  -  total flux cleaned = -0.00021788 Jy
! Component: 600  -  total flux cleaned = -0.000240489 Jy
! Component: 650  -  total flux cleaned = -0.000207262 Jy
! Component: 700  -  total flux cleaned = -0.000174957 Jy
! Component: 750  -  total flux cleaned = -0.000185758 Jy
! Component: 800  -  total flux cleaned = -0.000175329 Jy
! Component: 850  -  total flux cleaned = -0.00017539 Jy
! Component: 900  -  total flux cleaned = -0.000175472 Jy
! Component: 950  -  total flux cleaned = -0.000155746 Jy
! Component: 1000  -  total flux cleaned = -0.000194823 Jy
! Component: 1050  -  total flux cleaned = -0.000165917 Jy
! Component: 1100  -  total flux cleaned = -0.000156402 Jy
! Component: 1150  -  total flux cleaned = -0.00014721 Jy
! Component: 1200  -  total flux cleaned = -0.000147217 Jy
! Component: 1250  -  total flux cleaned = -0.000110819 Jy
! Component: 1300  -  total flux cleaned = -0.000101839 Jy
! Component: 1350  -  total flux cleaned = -8.4138e-05 Jy
! Component: 1400  -  total flux cleaned = -5.78635e-05 Jy
! Component: 1450  -  total flux cleaned = -5.78893e-05 Jy
! Component: 1500  -  total flux cleaned = -2.37246e-05 Jy
! Component: 1550  -  total flux cleaned = -6.86053e-06 Jy
! Component: 1600  -  total flux cleaned = 1.53558e-06 Jy
! Component: 1650  -  total flux cleaned = -1.4844e-05 Jy
! Component: 1700  -  total flux cleaned = -6.46395e-06 Jy
! Component: 1750  -  total flux cleaned = 2.58276e-05 Jy
! Component: 1800  -  total flux cleaned = 2.58116e-05 Jy
! Component: 1850  -  total flux cleaned = 1.79785e-05 Jy
! Component: 1900  -  total flux cleaned = 2.40007e-06 Jy
! Component: 1950  -  total flux cleaned = 2.56714e-05 Jy
! Component: 2000  -  total flux cleaned = 1.03332e-05 Jy
! Component: 2050  -  total flux cleaned = 3.29888e-05 Jy
! Component: 2100  -  total flux cleaned = 2.5413e-05 Jy
! Component: 2150  -  total flux cleaned = -4.32319e-06 Jy
! Component: 2200  -  total flux cleaned = 1.78558e-05 Jy
! Component: 2250  -  total flux cleaned = 3.2284e-06 Jy
! Component: 2300  -  total flux cleaned = -3.94857e-06 Jy
! Component: 2350  -  total flux cleaned = 3.90947e-05 Jy
! Component: 2400  -  total flux cleaned = 4.61003e-05 Jy
! Component: 2450  -  total flux cleaned = 2.4925e-05 Jy
! Component: 2500  -  total flux cleaned = 3.90458e-06 Jy
! Component: 2550  -  total flux cleaned = 1.09282e-05 Jy
! Component: 2600  -  total flux cleaned = -9.79356e-06 Jy
! Component: 2650  -  total flux cleaned = -3.72352e-05 Jy
! Component: 2700  -  total flux cleaned = -3.03757e-05 Jy
! Component: 2750  -  total flux cleaned = -4.38035e-05 Jy
! Component: 2800  -  total flux cleaned = -6.38264e-05 Jy
! Component: 2850  -  total flux cleaned = -5.04912e-05 Jy
! Component: 2900  -  total flux cleaned = -6.37631e-05 Jy
! Component: 2950  -  total flux cleaned = -8.99875e-05 Jy
! Component: 3000  -  total flux cleaned = -9.00082e-05 Jy
! Component: 3050  -  total flux cleaned = -0.00010281 Jy
! Component: 3100  -  total flux cleaned = -0.000102875 Jy
! Component: 3150  -  total flux cleaned = -0.000109208 Jy
! Component: 3200  -  total flux cleaned = -0.000109302 Jy
! Component: 3250  -  total flux cleaned = -0.000115625 Jy
! Component: 3300  -  total flux cleaned = -0.000134348 Jy
! Component: 3350  -  total flux cleaned = -0.000146728 Jy
! Component: 3400  -  total flux cleaned = -0.000134421 Jy
! Component: 3450  -  total flux cleaned = -0.000146619 Jy
! Component: 3500  -  total flux cleaned = -0.00016477 Jy
! Component: 3550  -  total flux cleaned = -0.000152693 Jy
! Component: 3600  -  total flux cleaned = -0.000140709 Jy
! Component: 3650  -  total flux cleaned = -0.000146697 Jy
! Component: 3700  -  total flux cleaned = -0.000176316 Jy
! Component: 3750  -  total flux cleaned = -0.000146778 Jy
! Component: 3800  -  total flux cleaned = -0.000146795 Jy
! Component: 3850  -  total flux cleaned = -0.000135113 Jy
! Component: 3900  -  total flux cleaned = -0.000129276 Jy
! Component: 3950  -  total flux cleaned = -0.000134964 Jy
! Component: 4000  -  total flux cleaned = -0.000112062 Jy
! Component: 4050  -  total flux cleaned = -0.000106352 Jy
! Total flux subtracted in 4096 components = -0.000112024 Jy
! Clean residual min=-0.000314 max=0.000299 Jy/beam
! Clean residual mean=-0.000001 rms=0.000103 Jy/beam
! Combined flux in latest and established models = 0.0974113 Jy
keep
! Adding 253 model components to the UV plane model.
! The established model now contains 358 components and 0.0974113 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bp192a1_uvs/J0543+3023_C\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.821 x 4.386 at 20.84 degrees (North through East)
! Clean map  min=-0.00087009  max=0.092083 Jy/beam
! Writing clean map to FITS file: /scr/pima/bp192a1_uvs/J0543+3023_C_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.092083 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000102925 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.335322 0.335322 0.670644 1.34129 2.68258 5.36515 10.7303 21.4606 42.9212 85.8424
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0003 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.092 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  894.662 
quit
! Quitting program
! Log file /scr/pima/bp192a1_uvs/J0543+3023_C_uvs.log closed on Wed Sep 16 13:32:39 2015