! Started logfile: /scr/pima/bp192a1_uvs/J0539-3412_C_uvs.log on Wed Sep 16 13:32:31 2015
obs /scr/pima/bp192a1_uvs/J0539-3412_C_uva.fits
! Reading UV FITS file: /scr/pima/bp192a1_uvs/J0539-3412_C_uva.fits
! AN table 1: 35 integrations on 21 of 21 possible baselines.
! Apparent sampling: 0.619048 visibilities/baseline/integration-bin.
! Found source: J0539-3412
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    4.128e+09      3.2e+07          1      3.2e+07
!  02        2     4.16e+09      3.2e+07          1      3.2e+07
!  03        3    4.192e+09      3.2e+07          1      3.2e+07
!  04        4    4.224e+09      3.2e+07          1      3.2e+07
!  05        5    4.416e+09      3.2e+07          1      3.2e+07
!  06        6    4.512e+09      3.2e+07          1      3.2e+07
!  07        7    4.544e+09      3.2e+07          1      3.2e+07
!  08        8    4.576e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 3640 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.3 
print "taper_size =", taper_size
! taper_size = 40 
![@/home/lpetrov/bin/01_muppet /scr/pima/bp192a1_uvs/J0539-3412_C]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 35 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 35 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 35 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 35 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 35 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 35 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 35 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 35 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.000926Jy  sigma=17.672224
! Fit after  self-cal, rms=0.972037Jy  sigma=16.978061
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.814 mas, bmaj=35.61 mas, bpa=-12.02 degrees
! Estimated noise=0.892823 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0223035 Jy
! Component: 100  -  total flux cleaned = 0.0256114 Jy
! Total flux subtracted in 100 components = 0.0256114 Jy
! Clean residual min=-0.001907 max=0.001913 Jy/beam
! Clean residual mean=0.000006 rms=0.000748 Jy/beam
! Combined flux in latest and established models = 0.0256114 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 0.0256114 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.037493Jy  sigma=0.620793
! Fit after  self-cal, rms=0.035944Jy  sigma=0.591261
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=5.907 mas, bmaj=35.33 mas, bpa=-11.07 degrees
! Estimated noise=0.708397 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00155218 Jy
! Component: 100  -  total flux cleaned = 0.0018757 Jy
! Component: 150  -  total flux cleaned = 0.00195423 Jy
! Component: 200  -  total flux cleaned = 0.00189871 Jy
! Total flux subtracted in 200 components = 0.00189871 Jy
! Clean residual min=-0.000912 max=0.000903 Jy/beam
! Clean residual mean=0.000007 rms=0.000375 Jy/beam
! Combined flux in latest and established models = 0.0275101 Jy
! Performing phase self-cal
! Adding 68 model components to the UV plane model.
! The established model now contains 79 components and 0.0275101 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.035520Jy  sigma=0.585827
! Fit after  self-cal, rms=0.035417Jy  sigma=0.584740
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 5.907 x 35.33 at -11.07 degrees (North through East)
! Clean map  min=-0.00183  max=0.028945 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    KP        1.00*    LA        1.00*    NL        1.00*    
!   OV        1.00*    PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.12     KP        0.99     LA        1.05     NL        0.92     
!   OV        0.86     PT        0.95     SC        1.00*    
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.98     KP        0.91     LA        1.06     NL        0.85     
!   OV        0.95     PT        0.94     SC        1.00*    
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    KP        1.00*    LA        1.00*    NL        1.00*    
!   OV        1.00*    PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.09     KP        0.96     LA        1.06     NL        0.94     
!   OV        0.93     PT        1.02     SC        1.00*    
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.98     KP        0.97     LA        1.17     NL        0.94     
!   OV        1.14     PT        1.08     SC        1.00*    
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.08     KP        1.00     LA        0.98     NL        0.88     
!   OV        0.98     PT        0.97     SC        1.00*    
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    KP        1.00*    LA        1.00*    NL        1.00*    
!   OV        1.00*    PT        1.00*    SC        1.00*    
! 
! 
! Fit before self-cal, rms=0.035417Jy  sigma=0.584740
! Fit after  self-cal, rms=0.035078Jy  sigma=0.582956
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=5.805 mas, bmaj=35.45 mas, bpa=-11.28 degrees
! Estimated noise=0.708894 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00106456 Jy
! Component: 100  -  total flux cleaned = -0.00159336 Jy
! Component: 150  -  total flux cleaned = -0.00182126 Jy
! Component: 200  -  total flux cleaned = -0.00203783 Jy
! Total flux subtracted in 200 components = -0.00203783 Jy
! Clean residual min=-0.000368 max=0.000368 Jy/beam
! Clean residual mean=0.000003 rms=0.000165 Jy/beam
! Combined flux in latest and established models = 0.0254723 Jy
! Performing phase self-cal
! Adding 77 model components to the UV plane model.
! The established model now contains 152 components and 0.0254723 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.035016Jy  sigma=0.581982
! Fit after  self-cal, rms=0.034953Jy  sigma=0.581247
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.034953Jy  sigma=0.581247
! Fit after  self-cal, rms=0.034628Jy  sigma=0.580845
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.786 mas, bmaj=35.52 mas, bpa=-11.34 degrees
! Estimated noise=0.708695 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000293287 Jy
! Component: 100  -  total flux cleaned = -0.000392646 Jy
! Component: 150  -  total flux cleaned = -0.000518403 Jy
! Component: 200  -  total flux cleaned = -0.000574851 Jy
! Total flux subtracted in 200 components = -0.000574851 Jy
! Clean residual min=-0.000296 max=0.000298 Jy/beam
! Clean residual mean=0.000003 rms=0.000133 Jy/beam
! Combined flux in latest and established models = 0.0248975 Jy
selfcal
! Performing phase self-cal
! Adding 85 model components to the UV plane model.
! The established model now contains 234 components and 0.0248975 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.034597Jy  sigma=0.580341
! Fit after  self-cal, rms=0.034558Jy  sigma=0.579911
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.79034e-05 Jy
! Component: 100  -  total flux cleaned = -0.000110932 Jy
! Component: 150  -  total flux cleaned = -0.000238523 Jy
! Component: 200  -  total flux cleaned = -0.000303618 Jy
! Total flux subtracted in 200 components = -0.000303618 Jy
! Clean residual min=-0.000262 max=0.000262 Jy/beam
! Clean residual mean=0.000002 rms=0.000117 Jy/beam
! Combined flux in latest and established models = 0.0245938 Jy
! Performing phase self-cal
! Adding 84 model components to the UV plane model.
! The established model now contains 312 components and 0.0245938 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.034537Jy  sigma=0.579540
! Fit after  self-cal, rms=0.034526Jy  sigma=0.579458
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.034526Jy  sigma=0.579458
! Fit after  self-cal, rms=0.034141Jy  sigma=0.578786
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.798 mas, bmaj=35.54 mas, bpa=-11.32 degrees
! Estimated noise=0.703225 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000216767 Jy
! Component: 100  -  total flux cleaned = 0.000180654 Jy
! Component: 150  -  total flux cleaned = 0.000110631 Jy
! Component: 200  -  total flux cleaned = 6.20016e-05 Jy
! Total flux subtracted in 200 components = 6.20016e-05 Jy
! Clean residual min=-0.000243 max=0.000245 Jy/beam
! Clean residual mean=0.000002 rms=0.000110 Jy/beam
! Combined flux in latest and established models = 0.0246558 Jy
selfcal
! Performing phase self-cal
! Adding 58 model components to the UV plane model.
! The established model now contains 368 components and 0.0246559 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.034121Jy  sigma=0.578448
! Fit after  self-cal, rms=0.034122Jy  sigma=0.578215
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000152429 Jy
! Component: 100  -  total flux cleaned = 0.000118452 Jy
! Component: 150  -  total flux cleaned = 3.92555e-05 Jy
! Component: 200  -  total flux cleaned = 2.58064e-05 Jy
! Total flux subtracted in 200 components = 2.58064e-05 Jy
! Clean residual min=-0.000229 max=0.000230 Jy/beam
! Clean residual mean=0.000001 rms=0.000104 Jy/beam
! Combined flux in latest and established models = 0.0246817 Jy
! Performing phase self-cal
! Adding 81 model components to the UV plane model.
! The established model now contains 440 components and 0.0246817 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.034106Jy  sigma=0.577946
! Fit after  self-cal, rms=0.034097Jy  sigma=0.577862
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.034097Jy  sigma=0.577862
! Fit after  self-cal, rms=0.034002Jy  sigma=0.577775
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.413 mas, bmaj=35.94 mas, bpa=-10.34 degrees
! Estimated noise=0.70171 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000307829 Jy
! Component: 100  -  total flux cleaned = 0.000417674 Jy
! Component: 150  -  total flux cleaned = 0.000449251 Jy
! Component: 200  -  total flux cleaned = 0.000479166 Jy
! Total flux subtracted in 200 components = 0.000479166 Jy
! Clean residual min=-0.000228 max=0.000227 Jy/beam
! Clean residual mean=0.000001 rms=0.000106 Jy/beam
! Combined flux in latest and established models = 0.0251608 Jy
selfcal
! Performing phase self-cal
! Adding 77 model components to the UV plane model.
! The established model now contains 514 components and 0.0251608 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.033986Jy  sigma=0.577499
! Fit after  self-cal, rms=0.033986Jy  sigma=0.577445
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000131258 Jy
! Component: 100  -  total flux cleaned = 7.38792e-05 Jy
! Component: 150  -  total flux cleaned = -5.48092e-06 Jy
! Component: 200  -  total flux cleaned = -5.27673e-06 Jy
! Total flux subtracted in 200 components = -5.27673e-06 Jy
! Clean residual min=-0.000198 max=0.000196 Jy/beam
! Clean residual mean=0.000001 rms=0.000093 Jy/beam
! Combined flux in latest and established models = 0.0251555 Jy
! Performing phase self-cal
! Adding 78 model components to the UV plane model.
! The established model now contains 583 components and 0.0251555 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.033975Jy  sigma=0.577275
! Fit after  self-cal, rms=0.033961Jy  sigma=0.577141
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=5.81 mas, bmaj=35.52 mas, bpa=-11.29 degrees
! Estimated noise=0.70008 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 5.81 x 35.52 at -11.29 degrees (North through East)
! Clean map  min=-0.0019575  max=0.028152 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.729 mas, bmaj=35.67 mas, bpa=-12.28 degrees
! Estimated noise=0.877893 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0235114 Jy
! Component: 100  -  total flux cleaned = 0.0241169 Jy
! Component: 150  -  total flux cleaned = 0.0227706 Jy
! Component: 200  -  total flux cleaned = 0.0226791 Jy
! Total flux subtracted in 200 components = 0.0226791 Jy
! Clean residual min=-0.001502 max=0.001489 Jy/beam
! Clean residual mean=0.000008 rms=0.000648 Jy/beam
! Combined flux in latest and established models = 0.0226791 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 49 model components to the UV plane model.
! The established model now contains 49 components and 0.0226791 Jy
! Inverting map and beam 
! Estimated beam: bmin=5.81 mas, bmaj=35.52 mas, bpa=-11.29 degrees
! Estimated noise=0.70008 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000219142 Jy
! Component: 100  -  total flux cleaned = -0.000378411 Jy
! Component: 150  -  total flux cleaned = -0.000524617 Jy
! Component: 200  -  total flux cleaned = -0.000566155 Jy
! Total flux subtracted in 200 components = -0.000566155 Jy
! Clean residual min=-0.000666 max=0.000660 Jy/beam
! Clean residual mean=0.000006 rms=0.000311 Jy/beam
! Combined flux in latest and established models = 0.0221129 Jy
! Adding 79 model components to the UV plane model.
! The established model now contains 126 components and 0.0221129 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.413 mas, bmaj=35.94 mas, bpa=-10.34 degrees
! Estimated noise=0.70171 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000335506 Jy
! Component: 100  -  total flux cleaned = 0.000237309 Jy
! Component: 150  -  total flux cleaned = 3.17837e-05 Jy
! Component: 200  -  total flux cleaned = -0.000183914 Jy
! Total flux subtracted in 200 components = -0.000183914 Jy
! Clean residual min=-0.000434 max=0.000432 Jy/beam
! Clean residual mean=0.000003 rms=0.000208 Jy/beam
! Combined flux in latest and established models = 0.021929 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000173768 Jy
! Component: 100  -  total flux cleaned = -0.000335643 Jy
! Component: 150  -  total flux cleaned = -0.000487242 Jy
! Component: 200  -  total flux cleaned = -0.00054684 Jy
! Total flux subtracted in 200 components = -0.00054684 Jy
! Clean residual min=-0.000324 max=0.000324 Jy/beam
! Clean residual mean=0.000003 rms=0.000155 Jy/beam
! Combined flux in latest and established models = 0.0213821 Jy
! Adding 125 model components to the UV plane model.
! The established model now contains 246 components and 0.0213821 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=5.81 mas, bmaj=35.52 mas, bpa=-11.29 degrees
! Estimated noise=0.70008 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.86735e-05 Jy
! Component: 100  -  total flux cleaned = -0.000173311 Jy
! Component: 150  -  total flux cleaned = -0.000340392 Jy
! Component: 200  -  total flux cleaned = -0.0004659 Jy
! Total flux subtracted in 200 components = -0.0004659 Jy
! Clean residual min=-0.000253 max=0.000252 Jy/beam
! Clean residual mean=0.000001 rms=0.000120 Jy/beam
! Combined flux in latest and established models = 0.0209162 Jy
selfcal
! Performing phase self-cal
! Adding 80 model components to the UV plane model.
! The established model now contains 318 components and 0.0209162 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.033969Jy  sigma=0.577299
! Fit after  self-cal, rms=0.033968Jy  sigma=0.577249
wmodel /scr/pima/bp192a1_uvs/J0539-3412_C_map.mod
! Writing 318 model components to file: /scr/pima/bp192a1_uvs/J0539-3412_C_map.mod
wobs /scr/pima/bp192a1_uvs/J0539-3412_C_uvs.fits
! Writing UV FITS file: /scr/pima/bp192a1_uvs/J0539-3412_C_uvs.fits
wwins /scr/pima/bp192a1_uvs/J0539-3412_C_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
![Exited script file: /home/lpetrov/bin/01_muppet]
! 
wmap "/scr/pima/bp192a1_uvs/J0539-3412_C\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 5.81 x 35.52 at -11.29 degrees (North through East)
! Clean map  min=-0.0026669  max=0.027424 Jy/beam
! Writing clean map to FITS file: /scr/pima/bp192a1_uvs/J0539-3412_C_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0274245 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000124963 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.36698 1.36698 2.73397 5.46794 10.9359 21.8718 43.7435 87.487
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0003 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.027 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  219.461 
quit
! Quitting program
! Log file /scr/pima/bp192a1_uvs/J0539-3412_C_uvs.log closed on Wed Sep 16 13:32:34 2015