! Started logfile: /scr/pima/bp192a1_uvs/J0525-3133_X_uvs.log on Wed Sep 16 13:31:40 2015 obs /scr/pima/bp192a1_uvs/J0525-3133_X_uva.fits ! Reading UV FITS file: /scr/pima/bp192a1_uvs/J0525-3133_X_uva.fits ! AN table 1: 19 integrations on 10 of 10 possible baselines. ! Apparent sampling: 0.6 visibilities/baseline/integration-bin. ! Found source: J0525-3133 ! ! There are 8 IFs, and a total of 8 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 7.392e+09 3.2e+07 1 3.2e+07 ! 02 2 7.424e+09 3.2e+07 1 3.2e+07 ! 03 3 7.456e+09 3.2e+07 1 3.2e+07 ! 04 4 7.552e+09 3.2e+07 1 3.2e+07 ! 05 5 7.744e+09 3.2e+07 1 3.2e+07 ! 06 6 7.776e+09 3.2e+07 1 3.2e+07 ! 07 7 7.808e+09 3.2e+07 1 3.2e+07 ! 08 8 7.84e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 912 visibilities. select RR ! Selecting polarization: RR, channels: 1..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/home/lpetrov/bin/01_muppet /scr/pima/bp192a1_uvs/J0525-3133_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=1.002204Jy sigma=18.730415 ! Fit after self-cal, rms=0.968130Jy sigma=18.098758 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.339 mas, bmaj=23.92 mas, bpa=4.539 degrees ! Estimated noise=1.33034 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0248246 Jy ! Component: 100 - total flux cleaned = 0.0264908 Jy ! Total flux subtracted in 100 components = 0.0264908 Jy ! Clean residual min=-0.002440 max=0.002384 Jy/beam ! Clean residual mean=-0.000006 rms=0.000983 Jy/beam ! Combined flux in latest and established models = 0.0264908 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.0264908 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.029340Jy sigma=0.527589 ! Fit after self-cal, rms=0.027524Jy sigma=0.493291 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.544 mas, bmaj=25.19 mas, bpa=5.176 degrees ! Estimated noise=1.26525 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00196853 Jy ! Component: 100 - total flux cleaned = 0.0026258 Jy ! Component: 150 - total flux cleaned = 0.00275208 Jy ! Component: 200 - total flux cleaned = 0.00303738 Jy ! Total flux subtracted in 200 components = 0.00303738 Jy ! Clean residual min=-0.000911 max=0.000924 Jy/beam ! Clean residual mean=0.000005 rms=0.000300 Jy/beam ! Combined flux in latest and established models = 0.0295282 Jy ! Performing phase self-cal ! Adding 81 model components to the UV plane model. ! The established model now contains 92 components and 0.0295282 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.026923Jy sigma=0.482766 ! Fit after self-cal, rms=0.026708Jy sigma=0.481669 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.544 x 25.19 at 5.176 degrees (North through East) ! Clean map min=-0.0017879 max=0.030708 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! FD 1.00* KP 1.00* LA 1.00* OV 1.00* ! PT 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! FD 1.04 KP 1.09 LA 1.03 OV 0.83 ! PT 0.88 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! FD 1.09 KP 1.09 LA 1.15 OV 0.97 ! PT 0.94 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! FD 0.95 KP 1.01 LA 1.01 OV 0.95 ! PT 1.03 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! FD 0.96 KP 0.98 LA 0.92 OV 1.13 ! PT 1.02 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! FD 0.91 KP 1.07 LA 0.97 OV 1.05 ! PT 1.14 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! FD 0.88 KP 1.06 LA 0.99 OV 0.88 ! PT 1.07 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! FD 1.05 KP 1.02 LA 1.00 OV 0.85 ! PT 0.89 ! ! ! Fit before self-cal, rms=0.026708Jy sigma=0.481669 ! Fit after self-cal, rms=0.026359Jy sigma=0.478814 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.514 mas, bmaj=25.18 mas, bpa=5.175 degrees ! Estimated noise=1.26143 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000465252 Jy ! Component: 100 - total flux cleaned = 0.00034572 Jy ! Component: 150 - total flux cleaned = -0.00011602 Jy ! Component: 200 - total flux cleaned = -0.000527686 Jy ! Total flux subtracted in 200 components = -0.000527686 Jy ! Clean residual min=-0.000497 max=0.000493 Jy/beam ! Clean residual mean=0.000002 rms=0.000173 Jy/beam ! Combined flux in latest and established models = 0.0290005 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 126 components and 0.0290005 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.026320Jy sigma=0.478050 ! Fit after self-cal, rms=0.026300Jy sigma=0.476992 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.026300Jy sigma=0.476992 ! Fit after self-cal, rms=0.026567Jy sigma=0.476785 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.505 mas, bmaj=25.12 mas, bpa=5.211 degrees ! Estimated noise=1.26978 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000158613 Jy ! Component: 100 - total flux cleaned = -5.42173e-05 Jy ! Component: 150 - total flux cleaned = -0.000189014 Jy ! Component: 200 - total flux cleaned = -0.000206547 Jy ! Total flux subtracted in 200 components = -0.000206547 Jy ! Clean residual min=-0.000304 max=0.000301 Jy/beam ! Clean residual mean=0.000001 rms=0.000113 Jy/beam ! Combined flux in latest and established models = 0.0287939 Jy selfcal ! Performing phase self-cal ! Adding 50 model components to the UV plane model. ! The established model now contains 175 components and 0.0287939 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.026552Jy sigma=0.476468 ! Fit after self-cal, rms=0.026554Jy sigma=0.476294 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.16739e-05 Jy ! Component: 100 - total flux cleaned = -7.95608e-06 Jy ! Component: 150 - total flux cleaned = 0.000123216 Jy ! Component: 200 - total flux cleaned = 0.000251606 Jy ! Total flux subtracted in 200 components = 0.000251606 Jy ! Clean residual min=-0.000140 max=0.000143 Jy/beam ! Clean residual mean=0.000001 rms=0.000060 Jy/beam ! Combined flux in latest and established models = 0.0290455 Jy ! Performing phase self-cal ! Adding 75 model components to the UV plane model. ! The established model now contains 248 components and 0.0290455 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.026546Jy sigma=0.476106 ! Fit after self-cal, rms=0.026539Jy sigma=0.476062 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.026539Jy sigma=0.476062 ! Fit after self-cal, rms=0.026694Jy sigma=0.475746 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.496 mas, bmaj=25.14 mas, bpa=5.197 degrees ! Estimated noise=1.26927 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.40947e-05 Jy ! Component: 100 - total flux cleaned = 8.88764e-05 Jy ! Component: 150 - total flux cleaned = 0.000206474 Jy ! Component: 200 - total flux cleaned = 0.00028088 Jy ! Total flux subtracted in 200 components = 0.00028088 Jy ! Clean residual min=-0.000139 max=0.000139 Jy/beam ! Clean residual mean=0.000001 rms=0.000057 Jy/beam ! Combined flux in latest and established models = 0.0293264 Jy selfcal ! Performing phase self-cal ! Adding 68 model components to the UV plane model. ! The established model now contains 313 components and 0.0293264 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.026687Jy sigma=0.475666 ! Fit after self-cal, rms=0.026715Jy sigma=0.475583 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.64917e-05 Jy ! Component: 100 - total flux cleaned = -0.000147689 Jy ! Component: 150 - total flux cleaned = -8.36831e-05 Jy ! Component: 200 - total flux cleaned = -4.95552e-05 Jy ! Total flux subtracted in 200 components = -4.95552e-05 Jy ! Clean residual min=-0.000112 max=0.000114 Jy/beam ! Clean residual mean=0.000000 rms=0.000048 Jy/beam ! Combined flux in latest and established models = 0.0292769 Jy ! Performing phase self-cal ! Adding 88 model components to the UV plane model. ! The established model now contains 396 components and 0.0292769 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.026710Jy sigma=0.475508 ! Fit after self-cal, rms=0.026711Jy sigma=0.475483 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.026711Jy sigma=0.475483 ! Fit after self-cal, rms=0.026791Jy sigma=0.475456 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.61 mas, bmaj=24.94 mas, bpa=5.448 degrees ! Estimated noise=1.27512 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.03271e-06 Jy ! Component: 100 - total flux cleaned = 0.000104771 Jy ! Component: 150 - total flux cleaned = 0.000177173 Jy ! Component: 200 - total flux cleaned = 0.000244408 Jy ! Total flux subtracted in 200 components = 0.000244408 Jy ! Clean residual min=-0.000127 max=0.000126 Jy/beam ! Clean residual mean=0.000001 rms=0.000048 Jy/beam ! Combined flux in latest and established models = 0.0295213 Jy selfcal ! Performing phase self-cal ! Adding 60 model components to the UV plane model. ! The established model now contains 441 components and 0.0295213 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.026785Jy sigma=0.475415 ! Fit after self-cal, rms=0.026797Jy sigma=0.475380 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.51891e-05 Jy ! Component: 100 - total flux cleaned = -4.74534e-05 Jy ! Component: 150 - total flux cleaned = 1.3953e-05 Jy ! Component: 200 - total flux cleaned = 5.4586e-05 Jy ! Total flux subtracted in 200 components = 5.4586e-05 Jy ! Clean residual min=-0.000095 max=0.000096 Jy/beam ! Clean residual mean=0.000000 rms=0.000041 Jy/beam ! Combined flux in latest and established models = 0.0295759 Jy ! Performing phase self-cal ! Adding 70 model components to the UV plane model. ! The established model now contains 492 components and 0.0295759 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.026793Jy sigma=0.475331 ! Fit after self-cal, rms=0.026794Jy sigma=0.475312 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.489 mas, bmaj=25.15 mas, bpa=5.19 degrees ! Estimated noise=1.26951 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.489 x 25.15 at 5.19 degrees (North through East) ! Clean map min=-0.0011005 max=0.030402 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.27 mas, bmaj=23.99 mas, bpa=4.543 degrees ! Estimated noise=1.33064 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0260097 Jy ! Component: 100 - total flux cleaned = 0.0306732 Jy ! Component: 150 - total flux cleaned = 0.0325706 Jy ! Component: 200 - total flux cleaned = 0.0318828 Jy ! Total flux subtracted in 200 components = 0.0318828 Jy ! Clean residual min=-0.001446 max=0.001456 Jy/beam ! Clean residual mean=0.000004 rms=0.000568 Jy/beam ! Combined flux in latest and established models = 0.0318828 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 63 model components to the UV plane model. ! The established model now contains 63 components and 0.0318828 Jy ! Inverting map and beam ! Estimated beam: bmin=4.489 mas, bmaj=25.15 mas, bpa=5.19 degrees ! Estimated noise=1.26951 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00103241 Jy ! Component: 100 - total flux cleaned = 0.000925674 Jy ! Component: 150 - total flux cleaned = 0.000352575 Jy ! Component: 200 - total flux cleaned = -0.000264246 Jy ! Total flux subtracted in 200 components = -0.000264246 Jy ! Clean residual min=-0.000851 max=0.000847 Jy/beam ! Clean residual mean=0.000003 rms=0.000245 Jy/beam ! Combined flux in latest and established models = 0.0316185 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 105 components and 0.0316185 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.61 mas, bmaj=24.94 mas, bpa=5.448 degrees ! Estimated noise=1.27512 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000125128 Jy ! Component: 100 - total flux cleaned = 2.33455e-05 Jy ! Component: 150 - total flux cleaned = -9.43482e-05 Jy ! Component: 200 - total flux cleaned = -0.000177125 Jy ! Total flux subtracted in 200 components = -0.000177125 Jy ! Clean residual min=-0.000364 max=0.000364 Jy/beam ! Clean residual mean=0.000002 rms=0.000091 Jy/beam ! Combined flux in latest and established models = 0.0314414 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.82985e-05 Jy ! Component: 100 - total flux cleaned = -0.00014365 Jy ! Component: 150 - total flux cleaned = -0.00028776 Jy ! Component: 200 - total flux cleaned = -0.00058336 Jy ! Total flux subtracted in 200 components = -0.00058336 Jy ! Clean residual min=-0.000586 max=0.000588 Jy/beam ! Clean residual mean=0.000004 rms=0.000194 Jy/beam ! Combined flux in latest and established models = 0.0308581 Jy ! Adding 89 model components to the UV plane model. ! The established model now contains 194 components and 0.0308581 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.489 mas, bmaj=25.15 mas, bpa=5.19 degrees ! Estimated noise=1.26951 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.97754e-05 Jy ! Component: 100 - total flux cleaned = -0.000190635 Jy ! Component: 150 - total flux cleaned = -0.000470579 Jy ! Component: 200 - total flux cleaned = -0.000788207 Jy ! Total flux subtracted in 200 components = -0.000788207 Jy ! Clean residual min=-0.000417 max=0.000410 Jy/beam ! Clean residual mean=-0.000000 rms=0.000124 Jy/beam ! Combined flux in latest and established models = 0.0300699 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 213 components and 0.0300699 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.026801Jy sigma=0.475564 ! Fit after self-cal, rms=0.026799Jy sigma=0.475424 wmodel /scr/pima/bp192a1_uvs/J0525-3133_X_map.mod ! Writing 213 model components to file: /scr/pima/bp192a1_uvs/J0525-3133_X_map.mod wobs /scr/pima/bp192a1_uvs/J0525-3133_X_uvs.fits ! Writing UV FITS file: /scr/pima/bp192a1_uvs/J0525-3133_X_uvs.fits wwins /scr/pima/bp192a1_uvs/J0525-3133_X_map.win ! wwins: No CLEAN windows to write. ! Error occured in command: wwins ![Exited script file: /home/lpetrov/bin/01_muppet] ! wmap "/scr/pima/bp192a1_uvs/J0525-3133_X\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.489 x 25.15 at 5.19 degrees (North through East) ! Clean map min=-0.0014551 max=0.031585 Jy/beam ! Writing clean map to FITS file: /scr/pima/bp192a1_uvs/J0525-3133_X_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0315847 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 9.32481e-05 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.885696 0.885696 1.77139 3.54279 7.08557 14.1711 28.3423 56.6846 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0002 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.031 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 338.716 quit ! Quitting program ! Log file /scr/pima/bp192a1_uvs/J0525-3133_X_uvs.log closed on Wed Sep 16 13:31:43 2015