! Started logfile: /scr/pima/bp192a1_uvs/J0416-1851_X_uvs.log on Wed Sep 16 13:30:53 2015
obs /scr/pima/bp192a1_uvs/J0416-1851_X_uva.fits
! Reading UV FITS file: /scr/pima/bp192a1_uvs/J0416-1851_X_uva.fits
! AN table 1: 25 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.815111 visibilities/baseline/integration-bin.
! Found source: J0416-1851
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    7.392e+09      3.2e+07          1      3.2e+07
!  02        2    7.424e+09      3.2e+07          1      3.2e+07
!  03        3    7.456e+09      3.2e+07          1      3.2e+07
!  04        4    7.552e+09      3.2e+07          1      3.2e+07
!  05        5    7.744e+09      3.2e+07          1      3.2e+07
!  06        6    7.776e+09      3.2e+07          1      3.2e+07
!  07        7    7.808e+09      3.2e+07          1      3.2e+07
!  08        8     7.84e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 7336 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /scr/pima/bp192a1_uvs/J0416-1851_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 37 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 37 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 37 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 37 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 37 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 37 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 37 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 37 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.084523Jy  sigma=20.548397
! Fit after  self-cal, rms=0.593385Jy  sigma=11.466247
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7297 mas, bmaj=2.025 mas, bpa=-2.376 degrees
! Estimated noise=0.696317 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.30936 Jy
! Component: 100  -  total flux cleaned = 0.382297 Jy
! Total flux subtracted in 100 components = 0.382297 Jy
! Clean residual min=-0.020580 max=0.027491 Jy/beam
! Clean residual mean=-0.000008 rms=0.004444 Jy/beam
! Combined flux in latest and established models = 0.382297 Jy
! Performing phase self-cal
! Adding 4 model components to the UV plane model.
! The established model now contains 4 components and 0.382297 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.091858Jy  sigma=1.579169
! Fit after  self-cal, rms=0.091847Jy  sigma=1.578741
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0275195 Jy
! Component: 100  -  total flux cleaned = 0.0395124 Jy
! Total flux subtracted in 100 components = 0.0395124 Jy
! Clean residual min=-0.021061 max=0.017335 Jy/beam
! Clean residual mean=0.000001 rms=0.003722 Jy/beam
! Combined flux in latest and established models = 0.42181 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 17 components and 0.42181 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.079897Jy  sigma=1.403322
! Fit after  self-cal, rms=0.079866Jy  sigma=1.402979
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8839 mas, bmaj=2.316 mas, bpa=-1.087 degrees
! Estimated noise=0.445927 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0110803 Jy
! Component: 100  -  total flux cleaned = 0.0172232 Jy
! Component: 150  -  total flux cleaned = 0.0208527 Jy
! Component: 200  -  total flux cleaned = 0.021774 Jy
! Total flux subtracted in 200 components = 0.021774 Jy
! Clean residual min=-0.020661 max=0.018559 Jy/beam
! Clean residual mean=0.000010 rms=0.004973 Jy/beam
! Combined flux in latest and established models = 0.443584 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 34 components and 0.443584 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.077787Jy  sigma=1.384740
! Fit after  self-cal, rms=0.077771Jy  sigma=1.384597
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8839 x 2.316 at -1.087 degrees (North through East)
! Clean map  min=-0.019773  max=0.39842 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 5.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 6.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 7.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 8.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Fit before self-cal, rms=0.077771Jy  sigma=1.384597
! Fit after  self-cal, rms=0.076971Jy  sigma=1.386266
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.887 mas, bmaj=2.315 mas, bpa=-1.108 degrees
! Estimated noise=0.445815 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000798171 Jy
! Component: 100  -  total flux cleaned = 0.00129591 Jy
! Component: 150  -  total flux cleaned = 0.00182831 Jy
! Component: 200  -  total flux cleaned = 0.00231125 Jy
! Total flux subtracted in 200 components = 0.00231125 Jy
! Clean residual min=-0.020427 max=0.018572 Jy/beam
! Clean residual mean=0.000011 rms=0.004954 Jy/beam
! Combined flux in latest and established models = 0.445895 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 34 components and 0.445895 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.076881Jy  sigma=1.382917
! Fit after  self-cal, rms=0.076880Jy  sigma=1.382889
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.076880Jy  sigma=1.382889
! Fit after  self-cal, rms=0.076880Jy  sigma=1.382889
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.887 mas, bmaj=2.315 mas, bpa=-1.108 degrees
! Estimated noise=0.445815 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000532067 Jy
! Component: 100  -  total flux cleaned = 0.000925283 Jy
! Component: 150  -  total flux cleaned = 0.00123199 Jy
! Component: 200  -  total flux cleaned = 0.00155823 Jy
! Total flux subtracted in 200 components = 0.00155823 Jy
! Clean residual min=-0.020344 max=0.018551 Jy/beam
! Clean residual mean=0.000012 rms=0.004938 Jy/beam
! Combined flux in latest and established models = 0.447453 Jy
selfcal
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 35 components and 0.447453 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.076851Jy  sigma=1.381223
! Fit after  self-cal, rms=0.076851Jy  sigma=1.381207
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000193529 Jy
! Component: 100  -  total flux cleaned = 0.000281146 Jy
! Component: 150  -  total flux cleaned = 0.000365691 Jy
! Component: 200  -  total flux cleaned = 0.000443967 Jy
! Total flux subtracted in 200 components = 0.000443967 Jy
! Clean residual min=-0.020322 max=0.018503 Jy/beam
! Clean residual mean=0.000012 rms=0.004931 Jy/beam
! Combined flux in latest and established models = 0.447897 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 36 components and 0.447897 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.076825Jy  sigma=1.380194
! Fit after  self-cal, rms=0.076825Jy  sigma=1.380177
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.076825Jy  sigma=1.380177
! Fit after  self-cal, rms=0.075312Jy  sigma=1.350598
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8888 mas, bmaj=2.319 mas, bpa=-1.037 degrees
! Estimated noise=0.446255 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000964176 Jy
! Component: 100  -  total flux cleaned = -0.00104132 Jy
! Component: 150  -  total flux cleaned = -0.00111381 Jy
! Component: 200  -  total flux cleaned = -0.00111315 Jy
! Total flux subtracted in 200 components = -0.00111315 Jy
! Clean residual min=-0.018403 max=0.016998 Jy/beam
! Clean residual mean=0.000012 rms=0.004521 Jy/beam
! Combined flux in latest and established models = 0.446784 Jy
selfcal
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 41 components and 0.446784 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.075311Jy  sigma=1.348811
! Fit after  self-cal, rms=0.075311Jy  sigma=1.348788
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.28338e-05 Jy
! Component: 100  -  total flux cleaned = -3.21081e-05 Jy
! Component: 150  -  total flux cleaned = -3.1393e-05 Jy
! Component: 200  -  total flux cleaned = -6.3322e-05 Jy
! Total flux subtracted in 200 components = -6.3322e-05 Jy
! Clean residual min=-0.018386 max=0.016926 Jy/beam
! Clean residual mean=0.000011 rms=0.004519 Jy/beam
! Combined flux in latest and established models = 0.446721 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 42 components and 0.446721 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.075281Jy  sigma=1.348267
! Fit after  self-cal, rms=0.075281Jy  sigma=1.348260
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.075281Jy  sigma=1.348260
! Fit after  self-cal, rms=0.075280Jy  sigma=1.348235
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.238 mas, bmaj=4.844 mas, bpa=5.258 degrees
! Estimated noise=0.554595 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00467796 Jy
! Component: 100  -  total flux cleaned = 0.00525254 Jy
! Component: 150  -  total flux cleaned = 0.00566538 Jy
! Component: 200  -  total flux cleaned = 0.00619659 Jy
! Total flux subtracted in 200 components = 0.00619659 Jy
! Clean residual min=-0.028954 max=0.020434 Jy/beam
! Clean residual mean=0.000026 rms=0.007491 Jy/beam
! Combined flux in latest and established models = 0.452917 Jy
selfcal
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 43 components and 0.452917 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.075410Jy  sigma=1.350245
! Fit after  self-cal, rms=0.075411Jy  sigma=1.350229
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000510103 Jy
! Component: 100  -  total flux cleaned = 0.000872134 Jy
! Component: 150  -  total flux cleaned = 0.00133119 Jy
! Component: 200  -  total flux cleaned = 0.00176968 Jy
! Total flux subtracted in 200 components = 0.00176968 Jy
! Clean residual min=-0.028741 max=0.020025 Jy/beam
! Clean residual mean=0.000026 rms=0.007419 Jy/beam
! Combined flux in latest and established models = 0.454687 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 43 components and 0.454687 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.075770Jy  sigma=1.350798
! Fit after  self-cal, rms=0.075766Jy  sigma=1.350684
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8889 mas, bmaj=2.319 mas, bpa=-1.03 degrees
! Estimated noise=0.446233 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8889 x 2.319 at -1.03 degrees (North through East)
! Clean map  min=-0.017855  max=0.3874 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7311 mas, bmaj=2.026 mas, bpa=-2.274 degrees
! Estimated noise=0.698865 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.310694 Jy
! Component: 100  -  total flux cleaned = 0.383545 Jy
! Component: 150  -  total flux cleaned = 0.410822 Jy
! Component: 200  -  total flux cleaned = 0.422417 Jy
! Total flux subtracted in 200 components = 0.422417 Jy
! Clean residual min=-0.018869 max=0.016427 Jy/beam
! Clean residual mean=0.000002 rms=0.003464 Jy/beam
! Combined flux in latest and established models = 0.422417 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 18 model components to the UV plane model.
! The established model now contains 18 components and 0.422417 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8889 mas, bmaj=2.319 mas, bpa=-1.03 degrees
! Estimated noise=0.446233 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0103501 Jy
! Component: 100  -  total flux cleaned = 0.0159378 Jy
! Component: 150  -  total flux cleaned = 0.0189689 Jy
! Component: 200  -  total flux cleaned = 0.0195293 Jy
! Total flux subtracted in 200 components = 0.0195293 Jy
! Clean residual min=-0.018811 max=0.017284 Jy/beam
! Clean residual mean=0.000010 rms=0.004586 Jy/beam
! Combined flux in latest and established models = 0.441947 Jy
! Adding 18 model components to the UV plane model.
! The established model now contains 35 components and 0.441947 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.238 mas, bmaj=4.844 mas, bpa=5.258 degrees
! Estimated noise=0.554595 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00700229 Jy
! Component: 100  -  total flux cleaned = 0.00768761 Jy
! Component: 150  -  total flux cleaned = 0.00833872 Jy
! Component: 200  -  total flux cleaned = 0.00896337 Jy
! Total flux subtracted in 200 components = 0.00896337 Jy
! Clean residual min=-0.029262 max=0.021161 Jy/beam
! Clean residual mean=0.000026 rms=0.007585 Jy/beam
! Combined flux in latest and established models = 0.45091 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000592572 Jy
! Component: 100  -  total flux cleaned = 0.00115792 Jy
! Component: 150  -  total flux cleaned = 0.001568 Jy
! Component: 200  -  total flux cleaned = 0.00208899 Jy
! Total flux subtracted in 200 components = 0.00208899 Jy
! Clean residual min=-0.028988 max=0.020467 Jy/beam
! Clean residual mean=0.000026 rms=0.007493 Jy/beam
! Combined flux in latest and established models = 0.452999 Jy
! Adding 5 model components to the UV plane model.
! The established model now contains 35 components and 0.452999 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8889 mas, bmaj=2.319 mas, bpa=-1.03 degrees
! Estimated noise=0.446233 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00329351 Jy
! Component: 100  -  total flux cleaned = -0.00397619 Jy
! Component: 150  -  total flux cleaned = -0.00416735 Jy
! Component: 200  -  total flux cleaned = -0.00434744 Jy
! Total flux subtracted in 200 components = -0.00434744 Jy
! Clean residual min=-0.018175 max=0.017219 Jy/beam
! Clean residual mean=0.000012 rms=0.004488 Jy/beam
! Combined flux in latest and established models = 0.448651 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 43 components and 0.448651 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.075490Jy  sigma=1.346611
! Fit after  self-cal, rms=0.075483Jy  sigma=1.346528
wmodel /scr/pima/bp192a1_uvs/J0416-1851_X_map.mod
! Writing 43 model components to file: /scr/pima/bp192a1_uvs/J0416-1851_X_map.mod
wobs /scr/pima/bp192a1_uvs/J0416-1851_X_uvs.fits
! Writing UV FITS file: /scr/pima/bp192a1_uvs/J0416-1851_X_uvs.fits
wwins /scr/pima/bp192a1_uvs/J0416-1851_X_map.win
! wwins: Wrote 1 windows to /scr/pima/bp192a1_uvs/J0416-1851_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00414229 Jy
! Component: 100  -  total flux cleaned = -0.00536227 Jy
! Component: 150  -  total flux cleaned = -0.00733975 Jy
! Component: 200  -  total flux cleaned = -0.0096818 Jy
! Component: 250  -  total flux cleaned = -0.0111299 Jy
! Component: 300  -  total flux cleaned = -0.0113584 Jy
! Component: 350  -  total flux cleaned = -0.0120049 Jy
! Component: 400  -  total flux cleaned = -0.0124135 Jy
! Component: 450  -  total flux cleaned = -0.0124174 Jy
! Component: 500  -  total flux cleaned = -0.0124238 Jy
! Component: 550  -  total flux cleaned = -0.0124303 Jy
! Component: 600  -  total flux cleaned = -0.0124333 Jy
! Component: 650  -  total flux cleaned = -0.0125958 Jy
! Component: 700  -  total flux cleaned = -0.012596 Jy
! Component: 750  -  total flux cleaned = -0.0123034 Jy
! Component: 800  -  total flux cleaned = -0.0125973 Jy
! Component: 850  -  total flux cleaned = -0.012461 Jy
! Component: 900  -  total flux cleaned = -0.0121975 Jy
! Component: 950  -  total flux cleaned = -0.0120718 Jy
! Component: 1000  -  total flux cleaned = -0.0120698 Jy
! Component: 1050  -  total flux cleaned = -0.0119448 Jy
! Component: 1100  -  total flux cleaned = -0.0114763 Jy
! Component: 1150  -  total flux cleaned = -0.011252 Jy
! Component: 1200  -  total flux cleaned = -0.0110324 Jy
! Component: 1250  -  total flux cleaned = -0.0106068 Jy
! Component: 1300  -  total flux cleaned = -0.0100916 Jy
! Component: 1350  -  total flux cleaned = -0.00959016 Jy
! Component: 1400  -  total flux cleaned = -0.00900568 Jy
! Component: 1450  -  total flux cleaned = -0.00862538 Jy
! Component: 1500  -  total flux cleaned = -0.00806952 Jy
! Component: 1550  -  total flux cleaned = -0.00761854 Jy
! Component: 1600  -  total flux cleaned = -0.00709074 Jy
! Component: 1650  -  total flux cleaned = -0.00666228 Jy
! Component: 1700  -  total flux cleaned = -0.0062448 Jy
! Component: 1750  -  total flux cleaned = -0.00583761 Jy
! Component: 1800  -  total flux cleaned = -0.00536006 Jy
! Component: 1850  -  total flux cleaned = -0.00504786 Jy
! Component: 1900  -  total flux cleaned = -0.00443708 Jy
! Component: 1950  -  total flux cleaned = -0.00384135 Jy
! Component: 2000  -  total flux cleaned = -0.00340512 Jy
! Component: 2050  -  total flux cleaned = -0.00297635 Jy
! Component: 2100  -  total flux cleaned = -0.00234754 Jy
! Component: 2150  -  total flux cleaned = -0.00200625 Jy
! Component: 2200  -  total flux cleaned = -0.00173707 Jy
! Component: 2250  -  total flux cleaned = -0.0012082 Jy
! Component: 2300  -  total flux cleaned = -0.00081848 Jy
! Component: 2350  -  total flux cleaned = -0.000435979 Jy
! Component: 2400  -  total flux cleaned = -0.000247163 Jy
! Component: 2450  -  total flux cleaned = 1.14319e-06 Jy
! Component: 2500  -  total flux cleaned = 0.000244585 Jy
! Component: 2550  -  total flux cleaned = 0.000544594 Jy
! Component: 2600  -  total flux cleaned = 0.000839865 Jy
! Component: 2650  -  total flux cleaned = 0.00107298 Jy
! Component: 2700  -  total flux cleaned = 0.00130223 Jy
! Component: 2750  -  total flux cleaned = 0.00158583 Jy
! Component: 2800  -  total flux cleaned = 0.00180918 Jy
! Component: 2850  -  total flux cleaned = 0.00197446 Jy
! Component: 2900  -  total flux cleaned = 0.00252004 Jy
! Component: 2950  -  total flux cleaned = 0.00278777 Jy
! Component: 3000  -  total flux cleaned = 0.0028412 Jy
! Component: 3050  -  total flux cleaned = 0.00315714 Jy
! Component: 3100  -  total flux cleaned = 0.00357243 Jy
! Component: 3150  -  total flux cleaned = 0.00372556 Jy
! Component: 3200  -  total flux cleaned = 0.00382659 Jy
! Component: 3250  -  total flux cleaned = 0.00402716 Jy
! Component: 3300  -  total flux cleaned = 0.00427483 Jy
! Component: 3350  -  total flux cleaned = 0.0045199 Jy
! Component: 3400  -  total flux cleaned = 0.00480911 Jy
! Component: 3450  -  total flux cleaned = 0.00485588 Jy
! Component: 3500  -  total flux cleaned = 0.00518645 Jy
! Component: 3550  -  total flux cleaned = 0.00532659 Jy
! Component: 3600  -  total flux cleaned = 0.00569595 Jy
! Component: 3650  -  total flux cleaned = 0.00583205 Jy
! Component: 3700  -  total flux cleaned = 0.00614875 Jy
! Component: 3750  -  total flux cleaned = 0.0064174 Jy
! Component: 3800  -  total flux cleaned = 0.00646175 Jy
! Component: 3850  -  total flux cleaned = 0.00685782 Jy
! Component: 3900  -  total flux cleaned = 0.00707551 Jy
! Component: 3950  -  total flux cleaned = 0.00729206 Jy
! Component: 4000  -  total flux cleaned = 0.00767804 Jy
! Component: 4050  -  total flux cleaned = 0.00789064 Jy
! Total flux subtracted in 4096 components = 0.00814346 Jy
! Clean residual min=-0.002433 max=0.002360 Jy/beam
! Clean residual mean=-0.000005 rms=0.000732 Jy/beam
! Combined flux in latest and established models = 0.456795 Jy
keep
! Adding 376 model components to the UV plane model.
! The established model now contains 419 components and 0.456795 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bp192a1_uvs/J0416-1851_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8889 x 2.319 at -1.03 degrees (North through East)
! Clean map  min=-0.0063119  max=0.39245 Jy/beam
! Writing clean map to FITS file: /scr/pima/bp192a1_uvs/J0416-1851_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.392446 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000679995 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.519813 0.519813 1.03963 2.07925 4.15851 8.31701 16.634 33.2681 66.5361
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.002 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.392 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  577.13 
quit
! Quitting program
! Log file /scr/pima/bp192a1_uvs/J0416-1851_X_uvs.log closed on Wed Sep 16 13:30:58 2015