! Started logfile: /scr/pima/bp192a1_uvs/J0339-0133_X_uvs.log on Wed Sep 16 13:29:55 2015
obs /scr/pima/bp192a1_uvs/J0339-0133_X_uva.fits
! Reading UV FITS file: /scr/pima/bp192a1_uvs/J0339-0133_X_uva.fits
! AN table 1: 23 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.859903 visibilities/baseline/integration-bin.
! Found source: J0339-0133
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    7.392e+09      3.2e+07          1      3.2e+07
!  02        2    7.424e+09      3.2e+07          1      3.2e+07
!  03        3    7.456e+09      3.2e+07          1      3.2e+07
!  04        4    7.552e+09      3.2e+07          1      3.2e+07
!  05        5    7.744e+09      3.2e+07          1      3.2e+07
!  06        6    7.776e+09      3.2e+07          1      3.2e+07
!  07        7    7.808e+09      3.2e+07          1      3.2e+07
!  08        8     7.84e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 7120 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /scr/pima/bp192a1_uvs/J0339-0133_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.013004Jy  sigma=20.685597
! Fit after  self-cal, rms=0.799077Jy  sigma=16.170551
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7689 mas, bmaj=1.969 mas, bpa=-1.008 degrees
! Estimated noise=0.593565 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.148076 Jy
! Component: 100  -  total flux cleaned = 0.200202 Jy
! Total flux subtracted in 100 components = 0.200202 Jy
! Clean residual min=-0.017606 max=0.040774 Jy/beam
! Clean residual mean=0.000004 rms=0.005651 Jy/beam
! Combined flux in latest and established models = 0.200202 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.200202 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.102899Jy  sigma=1.944674
! Fit after  self-cal, rms=0.102831Jy  sigma=1.941810
! Inverting map 
! Added new window around map position (-1.6, -0.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0406988 Jy
! Component: 100  -  total flux cleaned = 0.0632664 Jy
! Total flux subtracted in 100 components = 0.0632664 Jy
! Clean residual min=-0.016480 max=0.020562 Jy/beam
! Clean residual mean=0.000001 rms=0.003858 Jy/beam
! Combined flux in latest and established models = 0.263469 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 23 components and 0.263469 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.078088Jy  sigma=1.415933
! Fit after  self-cal, rms=0.075055Jy  sigma=1.360059
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9173 mas, bmaj=2.26 mas, bpa=-1.429 degrees
! Estimated noise=0.424438 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.027143 Jy
! Component: 100  -  total flux cleaned = 0.0420037 Jy
! Component: 150  -  total flux cleaned = 0.0516698 Jy
! Component: 200  -  total flux cleaned = 0.058476 Jy
! Total flux subtracted in 200 components = 0.058476 Jy
! Clean residual min=-0.018702 max=0.015600 Jy/beam
! Clean residual mean=-0.000002 rms=0.003744 Jy/beam
! Combined flux in latest and established models = 0.321945 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 46 components and 0.321945 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.063067Jy  sigma=1.142685
! Fit after  self-cal, rms=0.062032Jy  sigma=1.122969
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9173 x 2.26 at -1.429 degrees (North through East)
! Clean map  min=-0.015014  max=0.18891 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 5.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 6.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 7.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 8.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Fit before self-cal, rms=0.062032Jy  sigma=1.122969
! Fit after  self-cal, rms=0.061927Jy  sigma=1.123990
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9169 mas, bmaj=2.264 mas, bpa=-1.469 degrees
! Estimated noise=0.424398 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00744257 Jy
! Component: 100  -  total flux cleaned = 0.0114776 Jy
! Component: 150  -  total flux cleaned = 0.0141211 Jy
! Component: 200  -  total flux cleaned = 0.0153216 Jy
! Total flux subtracted in 200 components = 0.0153216 Jy
! Clean residual min=-0.016484 max=0.012601 Jy/beam
! Clean residual mean=-0.000004 rms=0.003534 Jy/beam
! Combined flux in latest and established models = 0.337266 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 58 components and 0.337266 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.060747Jy  sigma=1.110093
! Fit after  self-cal, rms=0.060618Jy  sigma=1.107621
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.060618Jy  sigma=1.107621
! Fit after  self-cal, rms=0.060618Jy  sigma=1.107621
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9169 mas, bmaj=2.264 mas, bpa=-1.469 degrees
! Estimated noise=0.424398 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00187176 Jy
! Component: 100  -  total flux cleaned = 0.00231509 Jy
! Component: 150  -  total flux cleaned = 0.00264303 Jy
! Component: 200  -  total flux cleaned = 0.00288424 Jy
! Total flux subtracted in 200 components = 0.00288424 Jy
! Clean residual min=-0.015928 max=0.012810 Jy/beam
! Clean residual mean=-0.000005 rms=0.003506 Jy/beam
! Combined flux in latest and established models = 0.340151 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 60 components and 0.340151 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.060428Jy  sigma=1.104541
! Fit after  self-cal, rms=0.060401Jy  sigma=1.104171
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000366818 Jy
! Component: 100  -  total flux cleaned = 0.000534946 Jy
! Component: 150  -  total flux cleaned = 0.00068988 Jy
! Component: 200  -  total flux cleaned = 0.000788409 Jy
! Total flux subtracted in 200 components = 0.000788409 Jy
! Clean residual min=-0.015812 max=0.012877 Jy/beam
! Clean residual mean=-0.000005 rms=0.003496 Jy/beam
! Combined flux in latest and established models = 0.340939 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 66 components and 0.340939 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.060312Jy  sigma=1.102105
! Fit after  self-cal, rms=0.060299Jy  sigma=1.101929
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.060299Jy  sigma=1.101929
! Fit after  self-cal, rms=0.060299Jy  sigma=1.101929
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9169 mas, bmaj=2.264 mas, bpa=-1.469 degrees
! Estimated noise=0.424398 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.1787e-05 Jy
! Component: 100  -  total flux cleaned = 0.000244416 Jy
! Component: 150  -  total flux cleaned = 0.000378184 Jy
! Component: 200  -  total flux cleaned = 0.000420943 Jy
! Total flux subtracted in 200 components = 0.000420943 Jy
! Clean residual min=-0.015752 max=0.012845 Jy/beam
! Clean residual mean=-0.000005 rms=0.003489 Jy/beam
! Combined flux in latest and established models = 0.34136 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 69 components and 0.34136 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.060227Jy  sigma=1.100564
! Fit after  self-cal, rms=0.060217Jy  sigma=1.100453
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.404e-05 Jy
! Component: 100  -  total flux cleaned = 0.000121088 Jy
! Component: 150  -  total flux cleaned = 0.000204806 Jy
! Component: 200  -  total flux cleaned = 0.000246248 Jy
! Total flux subtracted in 200 components = 0.000246248 Jy
! Clean residual min=-0.015703 max=0.012783 Jy/beam
! Clean residual mean=-0.000005 rms=0.003484 Jy/beam
! Combined flux in latest and established models = 0.341606 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 70 components and 0.341606 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.060151Jy  sigma=1.099349
! Fit after  self-cal, rms=0.060143Jy  sigma=1.099262
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.060143Jy  sigma=1.099262
! Fit after  self-cal, rms=0.060143Jy  sigma=1.099262
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.129 mas, bmaj=3.662 mas, bpa=5.385 degrees
! Estimated noise=0.527655 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00423862 Jy
! Component: 100  -  total flux cleaned = 0.00462105 Jy
! Component: 150  -  total flux cleaned = 0.00501033 Jy
! Component: 200  -  total flux cleaned = 0.00534895 Jy
! Total flux subtracted in 200 components = 0.00534895 Jy
! Clean residual min=-0.022700 max=0.020998 Jy/beam
! Clean residual mean=-0.000012 rms=0.006131 Jy/beam
! Combined flux in latest and established models = 0.346955 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 74 components and 0.346955 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.060209Jy  sigma=1.104540
! Fit after  self-cal, rms=0.060155Jy  sigma=1.103698
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000389958 Jy
! Component: 100  -  total flux cleaned = 0.000575689 Jy
! Component: 150  -  total flux cleaned = 0.000786823 Jy
! Component: 200  -  total flux cleaned = 0.000934087 Jy
! Total flux subtracted in 200 components = 0.000934087 Jy
! Clean residual min=-0.022583 max=0.021150 Jy/beam
! Clean residual mean=-0.000012 rms=0.006111 Jy/beam
! Combined flux in latest and established models = 0.347889 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 80 components and 0.347889 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.060320Jy  sigma=1.106309
! Fit after  self-cal, rms=0.060304Jy  sigma=1.106118
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9169 mas, bmaj=2.264 mas, bpa=-1.469 degrees
! Estimated noise=0.424398 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9169 x 2.264 at -1.469 degrees (North through East)
! Clean map  min=-0.014933  max=0.18612 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7691 mas, bmaj=1.969 mas, bpa=-0.9901 degrees
! Estimated noise=0.593676 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.146955 Jy
! Component: 100  -  total flux cleaned = 0.210119 Jy
! Component: 150  -  total flux cleaned = 0.248307 Jy
! Component: 200  -  total flux cleaned = 0.272355 Jy
! Total flux subtracted in 200 components = 0.272355 Jy
! Clean residual min=-0.011849 max=0.016452 Jy/beam
! Clean residual mean=-0.000000 rms=0.003422 Jy/beam
! Combined flux in latest and established models = 0.272355 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 20 model components to the UV plane model.
! The established model now contains 20 components and 0.272355 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9169 mas, bmaj=2.264 mas, bpa=-1.469 degrees
! Estimated noise=0.424398 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-2.6, -1.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0255572 Jy
! Component: 100  -  total flux cleaned = 0.0413552 Jy
! Component: 150  -  total flux cleaned = 0.0524428 Jy
! Component: 200  -  total flux cleaned = 0.06068 Jy
! Total flux subtracted in 200 components = 0.06068 Jy
! Clean residual min=-0.013868 max=0.013282 Jy/beam
! Clean residual mean=-0.000005 rms=0.003398 Jy/beam
! Combined flux in latest and established models = 0.333035 Jy
! Adding 47 model components to the UV plane model.
! The established model now contains 61 components and 0.333035 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.129 mas, bmaj=3.662 mas, bpa=5.385 degrees
! Estimated noise=0.527655 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0103311 Jy
! Component: 100  -  total flux cleaned = 0.0168125 Jy
! Component: 150  -  total flux cleaned = 0.0212132 Jy
! Component: 200  -  total flux cleaned = 0.0232449 Jy
! Total flux subtracted in 200 components = 0.0232449 Jy
! Clean residual min=-0.021605 max=0.021119 Jy/beam
! Clean residual mean=-0.000017 rms=0.005859 Jy/beam
! Combined flux in latest and established models = 0.35628 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000983834 Jy
! Component: 100  -  total flux cleaned = 0.00157947 Jy
! Component: 150  -  total flux cleaned = 0.00216481 Jy
! Component: 200  -  total flux cleaned = 0.00248864 Jy
! Total flux subtracted in 200 components = 0.00248864 Jy
! Clean residual min=-0.022065 max=0.020931 Jy/beam
! Clean residual mean=-0.000018 rms=0.005833 Jy/beam
! Combined flux in latest and established models = 0.358769 Jy
! Adding 47 model components to the UV plane model.
! The established model now contains 97 components and 0.358769 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9169 mas, bmaj=2.264 mas, bpa=-1.469 degrees
! Estimated noise=0.424398 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00100924 Jy
! Component: 100  -  total flux cleaned = -0.0010079 Jy
! Component: 150  -  total flux cleaned = -0.00101284 Jy
! Component: 200  -  total flux cleaned = -0.000926957 Jy
! Total flux subtracted in 200 components = -0.000926957 Jy
! Clean residual min=-0.014244 max=0.012707 Jy/beam
! Clean residual mean=-0.000009 rms=0.003261 Jy/beam
! Combined flux in latest and established models = 0.357842 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 111 components and 0.357842 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.057703Jy  sigma=1.058181
! Fit after  self-cal, rms=0.057490Jy  sigma=1.053459
wmodel /scr/pima/bp192a1_uvs/J0339-0133_X_map.mod
! Writing 111 model components to file: /scr/pima/bp192a1_uvs/J0339-0133_X_map.mod
wobs /scr/pima/bp192a1_uvs/J0339-0133_X_uvs.fits
! Writing UV FITS file: /scr/pima/bp192a1_uvs/J0339-0133_X_uvs.fits
wwins /scr/pima/bp192a1_uvs/J0339-0133_X_map.win
! wwins: Wrote 3 windows to /scr/pima/bp192a1_uvs/J0339-0133_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00112378 Jy
! Component: 100  -  total flux cleaned = -0.00111944 Jy
! Component: 150  -  total flux cleaned = -0.00172773 Jy
! Component: 200  -  total flux cleaned = -0.00173109 Jy
! Component: 250  -  total flux cleaned = -0.00190697 Jy
! Component: 300  -  total flux cleaned = -0.00190361 Jy
! Component: 350  -  total flux cleaned = -0.00190374 Jy
! Component: 400  -  total flux cleaned = -0.00205046 Jy
! Component: 450  -  total flux cleaned = -0.00218588 Jy
! Component: 500  -  total flux cleaned = -0.00231316 Jy
! Component: 550  -  total flux cleaned = -0.00231446 Jy
! Component: 600  -  total flux cleaned = -0.00208842 Jy
! Component: 650  -  total flux cleaned = -0.00186931 Jy
! Component: 700  -  total flux cleaned = -0.00144637 Jy
! Component: 750  -  total flux cleaned = -0.00103923 Jy
! Component: 800  -  total flux cleaned = -0.000550688 Jy
! Component: 850  -  total flux cleaned = 7.37928e-06 Jy
! Component: 900  -  total flux cleaned = 0.000365948 Jy
! Component: 950  -  total flux cleaned = 0.000711194 Jy
! Component: 1000  -  total flux cleaned = 0.00104391 Jy
! Component: 1050  -  total flux cleaned = 0.00120529 Jy
! Component: 1100  -  total flux cleaned = 0.00159125 Jy
! Component: 1150  -  total flux cleaned = 0.0017422 Jy
! Component: 1200  -  total flux cleaned = 0.00195875 Jy
! Component: 1250  -  total flux cleaned = 0.00202926 Jy
! Component: 1300  -  total flux cleaned = 0.00229964 Jy
! Component: 1350  -  total flux cleaned = 0.00249467 Jy
! Component: 1400  -  total flux cleaned = 0.00249465 Jy
! Component: 1450  -  total flux cleaned = 0.00268283 Jy
! Component: 1500  -  total flux cleaned = 0.00286436 Jy
! Component: 1550  -  total flux cleaned = 0.00298228 Jy
! Component: 1600  -  total flux cleaned = 0.00326564 Jy
! Component: 1650  -  total flux cleaned = 0.00320916 Jy
! Component: 1700  -  total flux cleaned = 0.0033712 Jy
! Component: 1750  -  total flux cleaned = 0.00337098 Jy
! Component: 1800  -  total flux cleaned = 0.00362537 Jy
! Component: 1850  -  total flux cleaned = 0.00362581 Jy
! Component: 1900  -  total flux cleaned = 0.0038664 Jy
! Component: 1950  -  total flux cleaned = 0.00391168 Jy
! Component: 2000  -  total flux cleaned = 0.00404997 Jy
! Component: 2050  -  total flux cleaned = 0.00418397 Jy
! Component: 2100  -  total flux cleaned = 0.00427121 Jy
! Component: 2150  -  total flux cleaned = 0.00426984 Jy
! Component: 2200  -  total flux cleaned = 0.00422759 Jy
! Component: 2250  -  total flux cleaned = 0.00430809 Jy
! Component: 2300  -  total flux cleaned = 0.00422658 Jy
! Component: 2350  -  total flux cleaned = 0.00406911 Jy
! Component: 2400  -  total flux cleaned = 0.00406881 Jy
! Component: 2450  -  total flux cleaned = 0.00418107 Jy
! Component: 2500  -  total flux cleaned = 0.00403341 Jy
! Component: 2550  -  total flux cleaned = 0.0041058 Jy
! Component: 2600  -  total flux cleaned = 0.00406987 Jy
! Component: 2650  -  total flux cleaned = 0.00399974 Jy
! Component: 2700  -  total flux cleaned = 0.00400048 Jy
! Component: 2750  -  total flux cleaned = 0.00410178 Jy
! Component: 2800  -  total flux cleaned = 0.00406831 Jy
! Component: 2850  -  total flux cleaned = 0.00400354 Jy
! Component: 2900  -  total flux cleaned = 0.00397098 Jy
! Component: 2950  -  total flux cleaned = 0.00400294 Jy
! Component: 3000  -  total flux cleaned = 0.00403383 Jy
! Component: 3050  -  total flux cleaned = 0.00403357 Jy
! Component: 3100  -  total flux cleaned = 0.00406319 Jy
! Component: 3150  -  total flux cleaned = 0.00397397 Jy
! Component: 3200  -  total flux cleaned = 0.00397398 Jy
! Component: 3250  -  total flux cleaned = 0.00403174 Jy
! Component: 3300  -  total flux cleaned = 0.00406011 Jy
! Component: 3350  -  total flux cleaned = 0.00408789 Jy
! Component: 3400  -  total flux cleaned = 0.00406019 Jy
! Component: 3450  -  total flux cleaned = 0.00406021 Jy
! Component: 3500  -  total flux cleaned = 0.00408702 Jy
! Component: 3550  -  total flux cleaned = 0.00403353 Jy
! Component: 3600  -  total flux cleaned = 0.00398063 Jy
! Component: 3650  -  total flux cleaned = 0.00398108 Jy
! Component: 3700  -  total flux cleaned = 0.00400705 Jy
! Component: 3750  -  total flux cleaned = 0.00405811 Jy
! Component: 3800  -  total flux cleaned = 0.00400684 Jy
! Component: 3850  -  total flux cleaned = 0.00395694 Jy
! Component: 3900  -  total flux cleaned = 0.0039567 Jy
! Component: 3950  -  total flux cleaned = 0.00393215 Jy
! Component: 4000  -  total flux cleaned = 0.00393236 Jy
! Component: 4050  -  total flux cleaned = 0.00395639 Jy
! Total flux subtracted in 4096 components = 0.00388512 Jy
! Clean residual min=-0.001274 max=0.001416 Jy/beam
! Clean residual mean=0.000001 rms=0.000426 Jy/beam
! Combined flux in latest and established models = 0.361727 Jy
keep
! Adding 383 model components to the UV plane model.
! The established model now contains 494 components and 0.361727 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bp192a1_uvs/J0339-0133_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9169 x 2.264 at -1.469 degrees (North through East)
! Clean map  min=-0.0053826  max=0.18444 Jy/beam
! Writing clean map to FITS file: /scr/pima/bp192a1_uvs/J0339-0133_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.184441 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000409501 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.666069 0.666069 1.33214 2.66428 5.32855 10.6571 21.3142 42.6284 85.2568
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0012 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.184 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  450.403 
quit
! Quitting program
! Log file /scr/pima/bp192a1_uvs/J0339-0133_X_uvs.log closed on Wed Sep 16 13:30:00 2015