! Started logfile: /scr/pima/bp192a1_uvs/J0327+0234_C_uvs.log on Wed Sep 16 13:30:07 2015
obs /scr/pima/bp192a1_uvs/J0327+0234_C_uva.fits
! Reading UV FITS file: /scr/pima/bp192a1_uvs/J0327+0234_C_uva.fits
! AN table 1: 28 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.831746 visibilities/baseline/integration-bin.
! Found source: J0327+0234
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    4.128e+09      3.2e+07          1      3.2e+07
!  02        2     4.16e+09      3.2e+07          1      3.2e+07
!  03        3    4.192e+09      3.2e+07          1      3.2e+07
!  04        4    4.224e+09      3.2e+07          1      3.2e+07
!  05        5    4.416e+09      3.2e+07          1      3.2e+07
!  06        6    4.512e+09      3.2e+07          1      3.2e+07
!  07        7    4.544e+09      3.2e+07          1      3.2e+07
!  08        8    4.576e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 8384 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.3 
print "taper_size =", taper_size
! taper_size = 40 
![@/home/lpetrov/bin/01_muppet /scr/pima/bp192a1_uvs/J0327+0234_C]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.005647Jy  sigma=23.878659
! Fit after  self-cal, rms=0.908928Jy  sigma=21.552702
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.296 mas, bmaj=3.619 mas, bpa=-1.881 degrees
! Estimated noise=0.487166 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0679185 Jy
! Component: 100  -  total flux cleaned = 0.0946755 Jy
! Total flux subtracted in 100 components = 0.0946755 Jy
! Clean residual min=-0.010305 max=0.013226 Jy/beam
! Clean residual mean=-0.000014 rms=0.002438 Jy/beam
! Combined flux in latest and established models = 0.0946755 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 0.0946755 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.051654Jy  sigma=1.173022
! Fit after  self-cal, rms=0.051289Jy  sigma=1.164221
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.565 mas, bmaj=3.947 mas, bpa=-2.184 degrees
! Estimated noise=0.332971 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0179839 Jy
! Component: 100  -  total flux cleaned = 0.0262387 Jy
! Component: 150  -  total flux cleaned = 0.0307027 Jy
! Component: 200  -  total flux cleaned = 0.0331021 Jy
! Total flux subtracted in 200 components = 0.0331021 Jy
! Clean residual min=-0.008993 max=0.010420 Jy/beam
! Clean residual mean=-0.000018 rms=0.002058 Jy/beam
! Combined flux in latest and established models = 0.127778 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 29 components and 0.127778 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.045243Jy  sigma=1.017595
! Fit after  self-cal, rms=0.045172Jy  sigma=1.016253
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.565 x 3.947 at -2.184 degrees (North through East)
! Clean map  min=-0.0085151  max=0.088274 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        1.09     HN        1.08     KP        0.84     
!   LA        1.03     MK        1.14     NL        1.09     OV        0.99     
!   PT        0.84     SC        1.03     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.92     FD        1.10     HN        1.07     KP        0.91     
!   LA        1.09     MK        0.99     NL        1.10     OV        1.00     
!   PT        0.93     SC        0.98     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.95     HN        1.05     KP        0.86     
!   LA        1.03     MK        0.91     NL        1.12     OV        0.98     
!   PT        0.90     SC        1.07     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 5.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.98     HN        1.09     KP        0.93     
!   LA        1.04     MK        1.02     NL        1.19     OV        0.94     
!   PT        0.88     SC        1.02     
! 
! 
! Correcting IF 6.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 7.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 8.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Fit before self-cal, rms=0.045172Jy  sigma=1.016253
! Fit after  self-cal, rms=0.044359Jy  sigma=1.001650
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.573 mas, bmaj=3.965 mas, bpa=-2.05 degrees
! Estimated noise=0.332271 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-6, 24.3).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00757295 Jy
! Component: 100  -  total flux cleaned = 0.00871063 Jy
! Component: 150  -  total flux cleaned = 0.00859702 Jy
! Component: 200  -  total flux cleaned = 0.00869679 Jy
! Total flux subtracted in 200 components = 0.00869679 Jy
! Clean residual min=-0.008050 max=0.007654 Jy/beam
! Clean residual mean=-0.000020 rms=0.001758 Jy/beam
! Combined flux in latest and established models = 0.136474 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 44 components and 0.136474 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.043084Jy  sigma=0.961124
! Fit after  self-cal, rms=0.043011Jy  sigma=0.959830
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.043011Jy  sigma=0.959830
! Fit after  self-cal, rms=0.042567Jy  sigma=0.952466
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.573 mas, bmaj=3.965 mas, bpa=-1.992 degrees
! Estimated noise=0.329101 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000424746 Jy
! Component: 100  -  total flux cleaned = -0.000347807 Jy
! Component: 150  -  total flux cleaned = -0.000348121 Jy
! Component: 200  -  total flux cleaned = -0.000290259 Jy
! Total flux subtracted in 200 components = -0.000290259 Jy
! Clean residual min=-0.007870 max=0.007522 Jy/beam
! Clean residual mean=-0.000018 rms=0.001669 Jy/beam
! Combined flux in latest and established models = 0.136184 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 54 components and 0.136184 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.042380Jy  sigma=0.945871
! Fit after  self-cal, rms=0.042357Jy  sigma=0.945481
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000367604 Jy
! Component: 100  -  total flux cleaned = -0.000310498 Jy
! Component: 150  -  total flux cleaned = -0.000257559 Jy
! Component: 200  -  total flux cleaned = -0.000255975 Jy
! Total flux subtracted in 200 components = -0.000255975 Jy
! Clean residual min=-0.007729 max=0.007467 Jy/beam
! Clean residual mean=-0.000018 rms=0.001649 Jy/beam
! Combined flux in latest and established models = 0.135928 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 62 components and 0.135928 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.042242Jy  sigma=0.941389
! Fit after  self-cal, rms=0.042215Jy  sigma=0.941042
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.042215Jy  sigma=0.941042
! Fit after  self-cal, rms=0.042335Jy  sigma=0.940873
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.578 mas, bmaj=3.969 mas, bpa=-1.857 degrees
! Estimated noise=0.330017 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000617829 Jy
! Component: 100  -  total flux cleaned = -0.000780369 Jy
! Component: 150  -  total flux cleaned = -0.000829941 Jy
! Component: 200  -  total flux cleaned = -0.000876395 Jy
! Total flux subtracted in 200 components = -0.000876395 Jy
! Clean residual min=-0.007625 max=0.007420 Jy/beam
! Clean residual mean=-0.000019 rms=0.001635 Jy/beam
! Combined flux in latest and established models = 0.135052 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 67 components and 0.135052 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.042244Jy  sigma=0.937401
! Fit after  self-cal, rms=0.042220Jy  sigma=0.937074
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (31.8, -50.1).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00645039 Jy
! Component: 100  -  total flux cleaned = 0.00772474 Jy
! Component: 150  -  total flux cleaned = 0.00847096 Jy
! Component: 200  -  total flux cleaned = 0.00874902 Jy
! Total flux subtracted in 200 components = 0.00874902 Jy
! Clean residual min=-0.007442 max=0.005548 Jy/beam
! Clean residual mean=-0.000016 rms=0.001487 Jy/beam
! Combined flux in latest and established models = 0.143801 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 95 components and 0.143801 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.041360Jy  sigma=0.909045
! Fit after  self-cal, rms=0.041239Jy  sigma=0.906214
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.041239Jy  sigma=0.906214
! Fit after  self-cal, rms=0.041327Jy  sigma=0.894773
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.783 mas, bmaj=6.218 mas, bpa=2.604 degrees
! Estimated noise=0.41766 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00207484 Jy
! Component: 100  -  total flux cleaned = 0.00279714 Jy
! Component: 150  -  total flux cleaned = 0.00283299 Jy
! Component: 200  -  total flux cleaned = 0.00230966 Jy
! Total flux subtracted in 200 components = 0.00230966 Jy
! Clean residual min=-0.008164 max=0.006628 Jy/beam
! Clean residual mean=-0.000031 rms=0.002003 Jy/beam
! Combined flux in latest and established models = 0.14611 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 104 components and 0.14611 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.041276Jy  sigma=0.889335
! Fit after  self-cal, rms=0.041114Jy  sigma=0.885334
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000548059 Jy
! Component: 100  -  total flux cleaned = -0.000833936 Jy
! Component: 150  -  total flux cleaned = -0.00129534 Jy
! Component: 200  -  total flux cleaned = -0.00162439 Jy
! Total flux subtracted in 200 components = -0.00162439 Jy
! Clean residual min=-0.007753 max=0.006548 Jy/beam
! Clean residual mean=-0.000031 rms=0.001904 Jy/beam
! Combined flux in latest and established models = 0.144486 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 107 components and 0.144486 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.041299Jy  sigma=0.887251
! Fit after  self-cal, rms=0.041158Jy  sigma=0.884177
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.588 mas, bmaj=3.977 mas, bpa=-1.612 degrees
! Estimated noise=0.335937 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.588 x 3.977 at -1.612 degrees (North through East)
! Clean map  min=-0.007028  max=0.089724 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.317 mas, bmaj=3.637 mas, bpa=-1.305 degrees
! Estimated noise=0.497787 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0688817 Jy
! Component: 100  -  total flux cleaned = 0.0959011 Jy
! Component: 150  -  total flux cleaned = 0.110623 Jy
! Component: 200  -  total flux cleaned = 0.120965 Jy
! Total flux subtracted in 200 components = 0.120965 Jy
! Clean residual min=-0.008395 max=0.008949 Jy/beam
! Clean residual mean=-0.000011 rms=0.001882 Jy/beam
! Combined flux in latest and established models = 0.120965 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 28 model components to the UV plane model.
! The established model now contains 28 components and 0.120965 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.588 mas, bmaj=3.977 mas, bpa=-1.612 degrees
! Estimated noise=0.335937 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (1.8, -0.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0113343 Jy
! Component: 100  -  total flux cleaned = 0.0164671 Jy
! Component: 150  -  total flux cleaned = 0.0190786 Jy
! Component: 200  -  total flux cleaned = 0.0202632 Jy
! Total flux subtracted in 200 components = 0.0202632 Jy
! Clean residual min=-0.007112 max=0.005924 Jy/beam
! Clean residual mean=-0.000016 rms=0.001530 Jy/beam
! Combined flux in latest and established models = 0.141228 Jy
! Adding 35 model components to the UV plane model.
! The established model now contains 57 components and 0.141228 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.783 mas, bmaj=6.218 mas, bpa=2.604 degrees
! Estimated noise=0.41766 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00127366 Jy
! Component: 100  -  total flux cleaned = 0.00288588 Jy
! Component: 150  -  total flux cleaned = 0.00321312 Jy
! Component: 200  -  total flux cleaned = 0.00348822 Jy
! Total flux subtracted in 200 components = 0.00348822 Jy
! Clean residual min=-0.007176 max=0.006636 Jy/beam
! Clean residual mean=-0.000034 rms=0.001968 Jy/beam
! Combined flux in latest and established models = 0.144716 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000118518 Jy
! Component: 100  -  total flux cleaned = 0.000122687 Jy
! Component: 150  -  total flux cleaned = -6.94724e-05 Jy
! Component: 200  -  total flux cleaned = -0.000254679 Jy
! Total flux subtracted in 200 components = -0.000254679 Jy
! Clean residual min=-0.006704 max=0.006534 Jy/beam
! Clean residual mean=-0.000034 rms=0.001834 Jy/beam
! Combined flux in latest and established models = 0.144462 Jy
! Adding 47 model components to the UV plane model.
! The established model now contains 92 components and 0.144462 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.588 mas, bmaj=3.977 mas, bpa=-1.612 degrees
! Estimated noise=0.335937 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00107478 Jy
! Component: 100  -  total flux cleaned = 0.000751916 Jy
! Component: 150  -  total flux cleaned = 0.000660668 Jy
! Component: 200  -  total flux cleaned = 0.00066505 Jy
! Total flux subtracted in 200 components = 0.00066505 Jy
! Clean residual min=-0.006126 max=0.004403 Jy/beam
! Clean residual mean=-0.000017 rms=0.001246 Jy/beam
! Combined flux in latest and established models = 0.145127 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 112 components and 0.145127 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.040162Jy  sigma=0.857241
! Fit after  self-cal, rms=0.040063Jy  sigma=0.854821
wmodel /scr/pima/bp192a1_uvs/J0327+0234_C_map.mod
! Writing 112 model components to file: /scr/pima/bp192a1_uvs/J0327+0234_C_map.mod
wobs /scr/pima/bp192a1_uvs/J0327+0234_C_uvs.fits
! Writing UV FITS file: /scr/pima/bp192a1_uvs/J0327+0234_C_uvs.fits
wwins /scr/pima/bp192a1_uvs/J0327+0234_C_map.win
! wwins: Wrote 4 windows to /scr/pima/bp192a1_uvs/J0327+0234_C_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00275057 Jy
! Component: 100  -  total flux cleaned = -0.00480097 Jy
! Component: 150  -  total flux cleaned = -0.00583787 Jy
! Component: 200  -  total flux cleaned = -0.00665537 Jy
! Component: 250  -  total flux cleaned = -0.00693507 Jy
! Component: 300  -  total flux cleaned = -0.0070707 Jy
! Component: 350  -  total flux cleaned = -0.00739185 Jy
! Component: 400  -  total flux cleaned = -0.00745418 Jy
! Component: 450  -  total flux cleaned = -0.00751402 Jy
! Component: 500  -  total flux cleaned = -0.00734237 Jy
! Component: 550  -  total flux cleaned = -0.00723154 Jy
! Component: 600  -  total flux cleaned = -0.00707007 Jy
! Component: 650  -  total flux cleaned = -0.00691325 Jy
! Component: 700  -  total flux cleaned = -0.00675934 Jy
! Component: 750  -  total flux cleaned = -0.00651071 Jy
! Component: 800  -  total flux cleaned = -0.00646272 Jy
! Component: 850  -  total flux cleaned = -0.00632003 Jy
! Component: 900  -  total flux cleaned = -0.00618129 Jy
! Component: 950  -  total flux cleaned = -0.00600174 Jy
! Component: 1000  -  total flux cleaned = -0.00587121 Jy
! Component: 1050  -  total flux cleaned = -0.00591445 Jy
! Component: 1100  -  total flux cleaned = -0.00582949 Jy
! Component: 1150  -  total flux cleaned = -0.00574732 Jy
! Component: 1200  -  total flux cleaned = -0.00562604 Jy
! Component: 1250  -  total flux cleaned = -0.005507 Jy
! Component: 1300  -  total flux cleaned = -0.00535159 Jy
! Component: 1350  -  total flux cleaned = -0.00523634 Jy
! Component: 1400  -  total flux cleaned = -0.0051251 Jy
! Component: 1450  -  total flux cleaned = -0.005015 Jy
! Component: 1500  -  total flux cleaned = -0.00501515 Jy
! Component: 1550  -  total flux cleaned = -0.00487585 Jy
! Component: 1600  -  total flux cleaned = -0.00491078 Jy
! Component: 1650  -  total flux cleaned = -0.00480914 Jy
! Component: 1700  -  total flux cleaned = -0.00480958 Jy
! Component: 1750  -  total flux cleaned = -0.0047112 Jy
! Component: 1800  -  total flux cleaned = -0.00464673 Jy
! Component: 1850  -  total flux cleaned = -0.00458232 Jy
! Component: 1900  -  total flux cleaned = -0.00458165 Jy
! Component: 1950  -  total flux cleaned = -0.00439761 Jy
! Component: 2000  -  total flux cleaned = -0.00436708 Jy
! Component: 2050  -  total flux cleaned = -0.00427803 Jy
! Component: 2100  -  total flux cleaned = -0.00421917 Jy
! Component: 2150  -  total flux cleaned = -0.00410412 Jy
! Component: 2200  -  total flux cleaned = -0.00401956 Jy
! Component: 2250  -  total flux cleaned = -0.0039365 Jy
! Component: 2300  -  total flux cleaned = -0.0038543 Jy
! Component: 2350  -  total flux cleaned = -0.00371973 Jy
! Component: 2400  -  total flux cleaned = -0.00366679 Jy
! Component: 2450  -  total flux cleaned = -0.00356227 Jy
! Component: 2500  -  total flux cleaned = -0.00351023 Jy
! Component: 2550  -  total flux cleaned = -0.00340842 Jy
! Component: 2600  -  total flux cleaned = -0.00335769 Jy
! Component: 2650  -  total flux cleaned = -0.00328281 Jy
! Component: 2700  -  total flux cleaned = -0.00311263 Jy
! Component: 2750  -  total flux cleaned = -0.0030885 Jy
! Component: 2800  -  total flux cleaned = -0.00296985 Jy
! Component: 2850  -  total flux cleaned = -0.0028998 Jy
! Component: 2900  -  total flux cleaned = -0.00276123 Jy
! Component: 2950  -  total flux cleaned = -0.00264724 Jy
! Component: 3000  -  total flux cleaned = -0.00255758 Jy
! Component: 3050  -  total flux cleaned = -0.00242446 Jy
! Component: 3100  -  total flux cleaned = -0.00227142 Jy
! Component: 3150  -  total flux cleaned = -0.00214156 Jy
! Component: 3200  -  total flux cleaned = -0.0020563 Jy
! Component: 3250  -  total flux cleaned = -0.0019302 Jy
! Component: 3300  -  total flux cleaned = -0.00188879 Jy
! Component: 3350  -  total flux cleaned = -0.00188899 Jy
! Component: 3400  -  total flux cleaned = -0.00178731 Jy
! Component: 3450  -  total flux cleaned = -0.00176732 Jy
! Component: 3500  -  total flux cleaned = -0.00174734 Jy
! Component: 3550  -  total flux cleaned = -0.00166849 Jy
! Component: 3600  -  total flux cleaned = -0.00162961 Jy
! Component: 3650  -  total flux cleaned = -0.00153412 Jy
! Component: 3700  -  total flux cleaned = -0.00159109 Jy
! Component: 3750  -  total flux cleaned = -0.0015536 Jy
! Component: 3800  -  total flux cleaned = -0.00153486 Jy
! Component: 3850  -  total flux cleaned = -0.00149818 Jy
! Component: 3900  -  total flux cleaned = -0.00147981 Jy
! Component: 3950  -  total flux cleaned = -0.00149769 Jy
! Component: 4000  -  total flux cleaned = -0.00142639 Jy
! Component: 4050  -  total flux cleaned = -0.00147933 Jy
! Total flux subtracted in 4096 components = -0.00142694 Jy
! Clean residual min=-0.000876 max=0.001038 Jy/beam
! Clean residual mean=-0.000003 rms=0.000336 Jy/beam
! Combined flux in latest and established models = 0.1437 Jy
keep
! Adding 342 model components to the UV plane model.
! The established model now contains 454 components and 0.1437 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bp192a1_uvs/J0327+0234_C\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.588 x 3.977 at -1.612 degrees (North through East)
! Clean map  min=-0.0054754  max=0.08764 Jy/beam
! Writing clean map to FITS file: /scr/pima/bp192a1_uvs/J0327+0234_C_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0876398 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000331659 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.1353 1.1353 2.27061 4.54121 9.08243 18.1649 36.3297 72.6594
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0009 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.087 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  264.246 
quit
! Quitting program
! Log file /scr/pima/bp192a1_uvs/J0327+0234_C_uvs.log closed on Wed Sep 16 13:30:12 2015