! Started logfile: /scr/pima/bp192a1_uvs/J0217+0144_X_uvs.log on Wed Sep 16 13:28:03 2015
obs /scr/pima/bp192a1_uvs/J0217+0144_X_uva.fits
! Reading UV FITS file: /scr/pima/bp192a1_uvs/J0217+0144_X_uva.fits
! AN table 1: 29 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.780077 visibilities/baseline/integration-bin.
! Found source: J0217+0144
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    7.392e+09      3.2e+07          1      3.2e+07
!  02        2    7.424e+09      3.2e+07          1      3.2e+07
!  03        3    7.456e+09      3.2e+07          1      3.2e+07
!  04        4    7.552e+09      3.2e+07          1      3.2e+07
!  05        5    7.744e+09      3.2e+07          1      3.2e+07
!  06        6    7.776e+09      3.2e+07          1      3.2e+07
!  07        7    7.808e+09      3.2e+07          1      3.2e+07
!  08        8     7.84e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 8144 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /scr/pima/bp192a1_uvs/J0217+0144_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.083478Jy  sigma=21.320591
! Fit after  self-cal, rms=0.597549Jy  sigma=12.029811
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7328 mas, bmaj=2.014 mas, bpa=-2.598 degrees
! Estimated noise=0.551359 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.297876 Jy
! Component: 100  -  total flux cleaned = 0.379689 Jy
! Total flux subtracted in 100 components = 0.379689 Jy
! Clean residual min=-0.026285 max=0.034871 Jy/beam
! Clean residual mean=0.000006 rms=0.005809 Jy/beam
! Combined flux in latest and established models = 0.379689 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.379689 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.108962Jy  sigma=1.981387
! Fit after  self-cal, rms=0.108955Jy  sigma=1.980635
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0386109 Jy
! Component: 100  -  total flux cleaned = 0.0601675 Jy
! Total flux subtracted in 100 components = 0.0601675 Jy
! Clean residual min=-0.020310 max=0.020467 Jy/beam
! Clean residual mean=0.000007 rms=0.004432 Jy/beam
! Combined flux in latest and established models = 0.439856 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 18 components and 0.439856 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.085957Jy  sigma=1.591151
! Fit after  self-cal, rms=0.085928Jy  sigma=1.590647
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8739 mas, bmaj=2.23 mas, bpa=-3.598 degrees
! Estimated noise=0.403534 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.023194 Jy
! Component: 100  -  total flux cleaned = 0.0375188 Jy
! Component: 150  -  total flux cleaned = 0.0469239 Jy
! Component: 200  -  total flux cleaned = 0.0532088 Jy
! Total flux subtracted in 200 components = 0.0532088 Jy
! Clean residual min=-0.022887 max=0.021324 Jy/beam
! Clean residual mean=0.000028 rms=0.005105 Jy/beam
! Combined flux in latest and established models = 0.493065 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 42 components and 0.493065 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.077341Jy  sigma=1.471858
! Fit after  self-cal, rms=0.077293Jy  sigma=1.470922
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8739 x 2.23 at -3.598 degrees (North through East)
! Clean map  min=-0.022128  max=0.39279 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.91     FD        0.97     HN        0.94     KP        1.18     
!   LA        0.94     MK        1.06     NL        1.19     OV        1.00     
!   PT        0.83     SC        0.96     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.97     HN        0.99     KP        1.06     
!   LA        0.98     MK        1.08     NL        1.12     OV        0.99     
!   PT        0.86     SC        1.00     
! 
! 
! Correcting IF 5.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 6.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 7.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 8.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Fit before self-cal, rms=0.077293Jy  sigma=1.470922
! Fit after  self-cal, rms=0.072900Jy  sigma=1.375849
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8792 mas, bmaj=2.232 mas, bpa=-3.249 degrees
! Estimated noise=0.404004 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00458896 Jy
! Component: 100  -  total flux cleaned = 0.00618845 Jy
! Component: 150  -  total flux cleaned = 0.00634584 Jy
! Component: 200  -  total flux cleaned = 0.00657093 Jy
! Total flux subtracted in 200 components = 0.00657093 Jy
! Clean residual min=-0.019217 max=0.017328 Jy/beam
! Clean residual mean=0.000015 rms=0.004280 Jy/beam
! Combined flux in latest and established models = 0.499636 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 46 components and 0.499636 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.072446Jy  sigma=1.371829
! Fit after  self-cal, rms=0.072439Jy  sigma=1.371668
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.072439Jy  sigma=1.371668
! Fit after  self-cal, rms=0.072433Jy  sigma=1.371110
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8789 mas, bmaj=2.23 mas, bpa=-3.207 degrees
! Estimated noise=0.40445 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00186674 Jy
! Component: 100  -  total flux cleaned = 0.00200585 Jy
! Component: 150  -  total flux cleaned = 0.00207289 Jy
! Component: 200  -  total flux cleaned = 0.00227406 Jy
! Total flux subtracted in 200 components = 0.00227406 Jy
! Clean residual min=-0.019202 max=0.016989 Jy/beam
! Clean residual mean=0.000015 rms=0.004280 Jy/beam
! Combined flux in latest and established models = 0.50191 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 49 components and 0.50191 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.072270Jy  sigma=1.369188
! Fit after  self-cal, rms=0.072264Jy  sigma=1.369135
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000206892 Jy
! Component: 100  -  total flux cleaned = 0.000267385 Jy
! Component: 150  -  total flux cleaned = 0.000328689 Jy
! Component: 200  -  total flux cleaned = 0.00051339 Jy
! Total flux subtracted in 200 components = 0.00051339 Jy
! Clean residual min=-0.019148 max=0.016736 Jy/beam
! Clean residual mean=0.000015 rms=0.004269 Jy/beam
! Combined flux in latest and established models = 0.502423 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 51 components and 0.502423 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.072178Jy  sigma=1.366946
! Fit after  self-cal, rms=0.072175Jy  sigma=1.366914
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.072175Jy  sigma=1.366914
! Fit after  self-cal, rms=0.072175Jy  sigma=1.366854
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8786 mas, bmaj=2.229 mas, bpa=-3.207 degrees
! Estimated noise=0.404524 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000625405 Jy
! Component: 100  -  total flux cleaned = 0.000681322 Jy
! Component: 150  -  total flux cleaned = 0.000798917 Jy
! Component: 200  -  total flux cleaned = 0.000914903 Jy
! Total flux subtracted in 200 components = 0.000914903 Jy
! Clean residual min=-0.019131 max=0.016592 Jy/beam
! Clean residual mean=0.000015 rms=0.004266 Jy/beam
! Combined flux in latest and established models = 0.503338 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 55 components and 0.503338 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.072086Jy  sigma=1.365127
! Fit after  self-cal, rms=0.072083Jy  sigma=1.365105
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.60328e-05 Jy
! Component: 100  -  total flux cleaned = 0.000182944 Jy
! Component: 150  -  total flux cleaned = 0.000239737 Jy
! Component: 200  -  total flux cleaned = 0.000296657 Jy
! Total flux subtracted in 200 components = 0.000296657 Jy
! Clean residual min=-0.019098 max=0.016448 Jy/beam
! Clean residual mean=0.000015 rms=0.004258 Jy/beam
! Combined flux in latest and established models = 0.503635 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 55 components and 0.503635 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.072016Jy  sigma=1.363263
! Fit after  self-cal, rms=0.072013Jy  sigma=1.363251
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.072013Jy  sigma=1.363251
! Fit after  self-cal, rms=0.072011Jy  sigma=1.363237
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.11 mas, bmaj=3.47 mas, bpa=5.125 degrees
! Estimated noise=0.513646 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00850721 Jy
! Component: 100  -  total flux cleaned = 0.00954727 Jy
! Component: 150  -  total flux cleaned = 0.0103761 Jy
! Component: 200  -  total flux cleaned = 0.0110404 Jy
! Total flux subtracted in 200 components = 0.0110404 Jy
! Clean residual min=-0.027722 max=0.023708 Jy/beam
! Clean residual mean=0.000033 rms=0.007160 Jy/beam
! Combined flux in latest and established models = 0.514675 Jy
selfcal
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 58 components and 0.514675 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.072677Jy  sigma=1.375488
! Fit after  self-cal, rms=0.072309Jy  sigma=1.369684
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000493872 Jy
! Component: 100  -  total flux cleaned = 0.000907353 Jy
! Component: 150  -  total flux cleaned = 0.00114127 Jy
! Component: 200  -  total flux cleaned = 0.00125319 Jy
! Total flux subtracted in 200 components = 0.00125319 Jy
! Clean residual min=-0.027354 max=0.023306 Jy/beam
! Clean residual mean=0.000032 rms=0.007129 Jy/beam
! Combined flux in latest and established models = 0.515928 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 63 components and 0.515928 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.072905Jy  sigma=1.380758
! Fit after  self-cal, rms=0.072676Jy  sigma=1.376880
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8785 mas, bmaj=2.229 mas, bpa=-3.21 degrees
! Estimated noise=0.404499 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8785 x 2.229 at -3.21 degrees (North through East)
! Clean map  min=-0.018275  max=0.38472 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7364 mas, bmaj=2.014 mas, bpa=-2.268 degrees
! Estimated noise=0.554196 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.299053 Jy
! Component: 100  -  total flux cleaned = 0.379373 Jy
! Component: 150  -  total flux cleaned = 0.417731 Jy
! Component: 200  -  total flux cleaned = 0.43984 Jy
! Total flux subtracted in 200 components = 0.43984 Jy
! Clean residual min=-0.016535 max=0.022166 Jy/beam
! Clean residual mean=0.000004 rms=0.004041 Jy/beam
! Combined flux in latest and established models = 0.43984 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 17 model components to the UV plane model.
! The established model now contains 17 components and 0.43984 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8785 mas, bmaj=2.229 mas, bpa=-3.21 degrees
! Estimated noise=0.404499 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (1.4, -1.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0280448 Jy
! Component: 100  -  total flux cleaned = 0.045559 Jy
! Component: 150  -  total flux cleaned = 0.0580061 Jy
! Component: 200  -  total flux cleaned = 0.0673057 Jy
! Total flux subtracted in 200 components = 0.0673057 Jy
! Clean residual min=-0.016841 max=0.015259 Jy/beam
! Clean residual mean=0.000017 rms=0.003848 Jy/beam
! Combined flux in latest and established models = 0.507145 Jy
! Adding 50 model components to the UV plane model.
! The established model now contains 67 components and 0.507145 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.11 mas, bmaj=3.47 mas, bpa=5.125 degrees
! Estimated noise=0.513646 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0146154 Jy
! Component: 100  -  total flux cleaned = 0.0240678 Jy
! Component: 150  -  total flux cleaned = 0.0282839 Jy
! Component: 200  -  total flux cleaned = 0.0306057 Jy
! Total flux subtracted in 200 components = 0.0306057 Jy
! Clean residual min=-0.024531 max=0.020961 Jy/beam
! Clean residual mean=0.000028 rms=0.006112 Jy/beam
! Combined flux in latest and established models = 0.537751 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00164765 Jy
! Component: 100  -  total flux cleaned = 0.00294412 Jy
! Component: 150  -  total flux cleaned = 0.00380324 Jy
! Component: 200  -  total flux cleaned = 0.00406053 Jy
! Total flux subtracted in 200 components = 0.00406053 Jy
! Clean residual min=-0.024391 max=0.020839 Jy/beam
! Clean residual mean=0.000027 rms=0.006039 Jy/beam
! Combined flux in latest and established models = 0.541812 Jy
! Adding 26 model components to the UV plane model.
! The established model now contains 88 components and 0.541812 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8785 mas, bmaj=2.229 mas, bpa=-3.21 degrees
! Estimated noise=0.404499 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00325859 Jy
! Component: 100  -  total flux cleaned = -0.0046325 Jy
! Component: 150  -  total flux cleaned = -0.00529657 Jy
! Component: 200  -  total flux cleaned = -0.00577566 Jy
! Total flux subtracted in 200 components = -0.00577566 Jy
! Clean residual min=-0.017435 max=0.014182 Jy/beam
! Clean residual mean=0.000012 rms=0.003565 Jy/beam
! Combined flux in latest and established models = 0.536036 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 98 components and 0.536036 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.066780Jy  sigma=1.262022
! Fit after  self-cal, rms=0.066158Jy  sigma=1.249200
wmodel /scr/pima/bp192a1_uvs/J0217+0144_X_map.mod
! Writing 98 model components to file: /scr/pima/bp192a1_uvs/J0217+0144_X_map.mod
wobs /scr/pima/bp192a1_uvs/J0217+0144_X_uvs.fits
! Writing UV FITS file: /scr/pima/bp192a1_uvs/J0217+0144_X_uvs.fits
wwins /scr/pima/bp192a1_uvs/J0217+0144_X_map.win
! wwins: Wrote 2 windows to /scr/pima/bp192a1_uvs/J0217+0144_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00728394 Jy
! Component: 100  -  total flux cleaned = -0.0104971 Jy
! Component: 150  -  total flux cleaned = -0.0127272 Jy
! Component: 200  -  total flux cleaned = -0.0141915 Jy
! Component: 250  -  total flux cleaned = -0.0153649 Jy
! Component: 300  -  total flux cleaned = -0.0162803 Jy
! Component: 350  -  total flux cleaned = -0.0167986 Jy
! Component: 400  -  total flux cleaned = -0.0174467 Jy
! Component: 450  -  total flux cleaned = -0.0174464 Jy
! Component: 500  -  total flux cleaned = -0.0175897 Jy
! Component: 550  -  total flux cleaned = -0.0171659 Jy
! Component: 600  -  total flux cleaned = -0.0171701 Jy
! Component: 650  -  total flux cleaned = -0.0167821 Jy
! Component: 700  -  total flux cleaned = -0.0162851 Jy
! Component: 750  -  total flux cleaned = -0.0160448 Jy
! Component: 800  -  total flux cleaned = -0.0158107 Jy
! Component: 850  -  total flux cleaned = -0.0153598 Jy
! Component: 900  -  total flux cleaned = -0.0150338 Jy
! Component: 950  -  total flux cleaned = -0.0147174 Jy
! Component: 1000  -  total flux cleaned = -0.0145096 Jy
! Component: 1050  -  total flux cleaned = -0.0140142 Jy
! Component: 1100  -  total flux cleaned = -0.0139166 Jy
! Component: 1150  -  total flux cleaned = -0.0138229 Jy
! Component: 1200  -  total flux cleaned = -0.013734 Jy
! Component: 1250  -  total flux cleaned = -0.0136464 Jy
! Component: 1300  -  total flux cleaned = -0.0133902 Jy
! Component: 1350  -  total flux cleaned = -0.0131411 Jy
! Component: 1400  -  total flux cleaned = -0.0129817 Jy
! Component: 1450  -  total flux cleaned = -0.0128252 Jy
! Component: 1500  -  total flux cleaned = -0.0128258 Jy
! Component: 1550  -  total flux cleaned = -0.012524 Jy
! Component: 1600  -  total flux cleaned = -0.0121568 Jy
! Component: 1650  -  total flux cleaned = -0.0119419 Jy
! Component: 1700  -  total flux cleaned = -0.0116623 Jy
! Component: 1750  -  total flux cleaned = -0.0114561 Jy
! Component: 1800  -  total flux cleaned = -0.0110562 Jy
! Component: 1850  -  total flux cleaned = -0.0111233 Jy
! Component: 1900  -  total flux cleaned = -0.0111241 Jy
! Component: 1950  -  total flux cleaned = -0.0111223 Jy
! Component: 2000  -  total flux cleaned = -0.0109377 Jy
! Component: 2050  -  total flux cleaned = -0.0110583 Jy
! Component: 2100  -  total flux cleaned = -0.0109978 Jy
! Component: 2150  -  total flux cleaned = -0.0108214 Jy
! Component: 2200  -  total flux cleaned = -0.0106498 Jy
! Component: 2250  -  total flux cleaned = -0.010706 Jy
! Component: 2300  -  total flux cleaned = -0.0106497 Jy
! Component: 2350  -  total flux cleaned = -0.0103784 Jy
! Component: 2400  -  total flux cleaned = -0.0104324 Jy
! Component: 2450  -  total flux cleaned = -0.0102739 Jy
! Component: 2500  -  total flux cleaned = -0.010223 Jy
! Component: 2550  -  total flux cleaned = -0.0102733 Jy
! Component: 2600  -  total flux cleaned = -0.0100719 Jy
! Component: 2650  -  total flux cleaned = -0.0101216 Jy
! Component: 2700  -  total flux cleaned = -0.00997527 Jy
! Component: 2750  -  total flux cleaned = -0.00992673 Jy
! Component: 2800  -  total flux cleaned = -0.0097851 Jy
! Component: 2850  -  total flux cleaned = -0.00992423 Jy
! Component: 2900  -  total flux cleaned = -0.00983044 Jy
! Component: 2950  -  total flux cleaned = -0.00960389 Jy
! Component: 3000  -  total flux cleaned = -0.00956003 Jy
! Component: 3050  -  total flux cleaned = -0.00964798 Jy
! Component: 3100  -  total flux cleaned = -0.00951768 Jy
! Component: 3150  -  total flux cleaned = -0.00943138 Jy
! Component: 3200  -  total flux cleaned = -0.00943057 Jy
! Component: 3250  -  total flux cleaned = -0.00938789 Jy
! Component: 3300  -  total flux cleaned = -0.00913945 Jy
! Component: 3350  -  total flux cleaned = -0.00905785 Jy
! Component: 3400  -  total flux cleaned = -0.00889636 Jy
! Component: 3450  -  total flux cleaned = -0.00873712 Jy
! Component: 3500  -  total flux cleaned = -0.00861845 Jy
! Component: 3550  -  total flux cleaned = -0.00834575 Jy
! Component: 3600  -  total flux cleaned = -0.0083069 Jy
! Component: 3650  -  total flux cleaned = -0.00803937 Jy
! Component: 3700  -  total flux cleaned = -0.00769951 Jy
! Component: 3750  -  total flux cleaned = -0.00736366 Jy
! Component: 3800  -  total flux cleaned = -0.00725278 Jy
! Component: 3850  -  total flux cleaned = -0.00692463 Jy
! Component: 3900  -  total flux cleaned = -0.00663615 Jy
! Component: 3950  -  total flux cleaned = -0.00649341 Jy
! Component: 4000  -  total flux cleaned = -0.00624569 Jy
! Component: 4050  -  total flux cleaned = -0.00603549 Jy
! Total flux subtracted in 4096 components = -0.0059311 Jy
! Clean residual min=-0.001853 max=0.002298 Jy/beam
! Clean residual mean=0.000000 rms=0.000615 Jy/beam
! Combined flux in latest and established models = 0.530105 Jy
keep
! Adding 352 model components to the UV plane model.
! The established model now contains 450 components and 0.530105 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bp192a1_uvs/J0217+0144_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8785 x 2.229 at -3.21 degrees (North through East)
! Clean map  min=-0.0058639  max=0.39116 Jy/beam
! Writing clean map to FITS file: /scr/pima/bp192a1_uvs/J0217+0144_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.391158 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000596096 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.457178 0.457178 0.914356 1.82871 3.65742 7.31485 14.6297 29.2594 58.5188
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0017 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.391 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  656.199 
quit
! Quitting program
! Log file /scr/pima/bp192a1_uvs/J0217+0144_X_uvs.log closed on Wed Sep 16 13:28:08 2015